NSC LM1117SX-2.85, LM1117S-ADJ, LM1117S-5.0, LM1117S-3.3, LM1117T-ADJ Datasheet
...
October 2002
LM1117/LM1117I
800mA Low-Dropout Linear Regulator
General Description
The LM1117 is a series of low dropout voltage regulators with a dropout of 1.2V at 800mA of load current. It has the same pin-out as National Semiconductor’s industry standard LM317.
The LM1117 is available in an adjustable version, which can set the output voltage from 1.25V to 13.8V with only two external resistors. In addition, it is also available in five fixed voltages, 1.8V, 2.5V, 2.85V, 3.3V, and 5V.
The LM1117 offers current limiting and thermal shutdown. Its circuit includes a zener trimmed bandgap reference to assure output voltage accuracy to within ±1%.
The LM1117 series is available in LLP, TO-263, SOT-223, TO-220, and TO-252 D-PAK packages. A minimum of 10µF tantalum capacitor is required at the output to improve the transient response and stability.
Features
nAvailable in 1.8V, 2.5V, 2.85V, 3.3V, 5V, and Adjustable Versions
nSpace Saving SOT-223 and LLP Packages
nCurrent Limiting and Thermal Protection
n Output Current |
800mA |
n Line Regulation |
0.2% (Max) |
n Load Regulation |
0.4% (Max) |
n Temperature Range |
|
— LM1117 |
0˚C to 125˚C |
— LM1117I |
−40˚C to 125˚C |
Applications
n2.85V Model for SCSI-2 Active Termination
nPost Regulator for Switching DC/DC Converter
nHigh Efficiency Linear Regulators
nBattery Charger
nBattery Powered Instrumentation
Typical Application
Active Terminator for SCSI-2 Bus
10091905
Fixed Output Regulator
10091928
Regulator Linear Dropout-Low 800mA LM1117/LM1117I
© 2002 National Semiconductor Corporation |
DS100919 |
www.national.com |
LM1117/LM1117I
Ordering Information
Package |
Temperature |
Part Number |
Packaging Marking |
Transport Media |
NSC |
|
Range |
|
|
|
Drawing |
|
|
|
|
|
|
3-lead |
0˚C to +125˚C |
LM1117MPX-ADJ |
N03A |
Tape and Reel |
MP04A |
SOT-223 |
|
|
|
|
|
|
LM1117MPX-1.8 |
N12A |
Tape and Reel |
|
|
|
|
|
|
|
|
|
|
LM1117MPX-2.5 |
N13A |
Tape and Reel |
|
|
|
|
|
|
|
|
|
LM1117MPX-2.85 |
N04A |
Tape and Reel |
|
|
|
|
|
|
|
|
|
LM1117MPX-3.3 |
N05A |
Tape and Reel |
|
|
|
|
|
|
|
|
|
LM1117MPX-5.0 |
N06A |
Tape and Reel |
|
|
|
|
|
|
|
|
−40˚C to +125˚C |
LM1117IMPX-ADJ |
N03B |
Tape and Reel |
|
|
|
|
|
|
|
|
|
LM1117IMPX-3.3 |
N05B |
Tape and Reel |
|
|
|
|
|
|
|
|
|
LM1117IMPX-5.0 |
N06B |
Tape and Reel |
|
|
|
|
|
|
|
3-lead TO-220 |
0˚C to +125˚C |
LM1117T-ADJ |
LM1117T-ADJ |
Rails |
T03B |
|
|
|
|
|
|
|
|
LM1117T-1.8 |
LM1117T-1.8 |
Rails |
|
|
|
|
|
|
|
|
|
LM1117T-2.5 |
LM1117T-2.5 |
Rails |
|
|
|
|
|
|
|
|
|
LM1117T-2.85 |
LM1117T-2.85 |
Rails |
|
|
|
|
|
|
|
|
|
LM1117T-3.3 |
LM1117T-3.3 |
Rails |
|
|
|
|
|
|
|
|
|
LM1117T-5.0 |
LM1117T-5.0 |
Rails |
|
|
|
|
|
|
|
3-lead TO-252 |
0˚C to +125˚C |
LM1117DTX-ADJ |
LM1117DT-ADJ |
Tape and Reel |
TD03B |
|
|
|
|
|
|
|
|
LM1117DTX-1.8 |
LM1117DT-1.8 |
Tape and Reel |
|
|
|
|
|
|
|
|
|
LM1117DTX-2.5 |
LM1117DT-2.5 |
Tape and Reel |
|
|
|
|
|
|
|
|
|
LM1117DTX-2.85 |
LM1117DT-2.85 |
Tape and Reel |
|
|
|
|
|
|
|
|
|
LM1117DTX-3.3 |
LM1117DT-3.3 |
Tape and Reel |
|
|
|
|
|
|
|
|
|
LM1117DTX-5.0 |
LM1117DT-5.0 |
Tape and Reel |
|
|
|
|
|
|
|
|
−40˚C to +125˚C |
LM1117IDTX-ADJ |
LM1117IDT-ADJ |
Tape and Reel |
|
|
|
|
|
|
|
|
|
LM1117IDTX-3.3 |
LM1117IDT-3.3 |
Tape and Reel |
|
|
|
|
|
|
|
|
|
LM1117IDTX-5.0 |
LM1117IDT-5.0 |
Tape and Reel |
|
|
|
|
|
|
|
8-lead LLP |
0˚C to +125˚C |
LM1117LDX-ADJ |
1117ADJ |
Tape and Reel |
LDC08A |
|
|
|
|
|
|
|
|
LM1117LDX-1.8 |
1117-18 |
Tape and Reel |
|
|
|
|
|
|
|
|
|
LM1117LDX-2.5 |
1117-25 |
Tape and Reel |
|
|
|
|
|
|
|
|
|
LM1117LDX-2.85 |
1117-28 |
Tape and Reel |
|
|
|
|
|
|
|
|
|
LM1117LDX-3.3 |
1117-33 |
Tape and Reel |
|
|
|
|
|
|
|
|
|
LM1117LDX-5.0 |
1117-50 |
Tape and Reel |
|
|
|
|
|
|
|
|
−40˚C to 125˚C |
LM1117ILDX-ADJ |
1117IAD |
Tape and Reel |
|
|
|
|
|
|
|
|
|
LM1117ILDX-3.3 |
1117I33 |
Tape and Reel |
|
|
|
|
|
|
|
|
|
LM1117ILDX-5.0 |
1117I50 |
Tape and Reel |
|
|
|
|
|
|
|
TO-263 |
0˚C to +125˚C |
LM1117SX-ADJ |
LM1117SADJ |
Tape and Reel |
TS3B |
|
|
|
|
|
|
|
|
LM1117SX-2.85 |
LM1117S2.85 |
Tape and Reel |
|
|
|
|
|
|
|
|
|
LM1117SX-3.3 |
LM1117S3.3 |
Tape and Reel |
|
|
|
|
|
|
|
|
|
LM1117SX-5.0 |
LM1117S5.0 |
Tape and Reel |
|
|
|
|
|
|
|
www.national.com |
2 |
Block Diagram
Connection Diagrams
SOT-223
10091904
Top View
TO-220
10091902
Top View
TO-252
10091938
Top View
LM1117/LM1117I
10091901
TO-263
10091944
Top View
10091945
Side View
LLP
10091946
When using the LLP package
Pins 2, 3 & 4 must be connected together and
Pins 5, 6 & 7 must be connected together
Top View
3 |
www.national.com |
LM1117/LM1117I
Absolute Maximum Ratings (Note 1)
If Military/Aerospace specified devices are required, please contact the National Semiconductor Sales Office/ Distributors for availability and specifications.
Maximum Input Voltage (VIN to GND) |
20V |
|
Power Dissipation (Note 2) |
Internally Limited |
|
Junction Temperature (TJ) |
150˚C |
|
(Note 2) |
||
|
||
Storage Temperature Range |
-65˚C to 150˚C |
|
Lead Temperature |
|
|
TO-220 (T) Package |
260˚C, 10 sec |
SOT-223 (IMP) Package |
260˚C, 4 sec |
ESD Tolerance (Note 3) |
2000V |
Operating Ratings (Note 1)
Input Voltage (VIN to GND) |
15V |
Junction Temperature Range (TJ)(Note 2) |
|
LM1117 |
0˚C to 125˚C |
LM1117I |
−40˚C to 125˚C |
LM1117 Electrical Characteristics
Typicals and limits appearing in normal type apply for TJ = 25˚C. Limits appearing in Boldface type apply over the entire junction temperature range for operation, 0˚C to 125˚C.
Symbol |
Parameter |
Conditions |
Min |
Typ |
Max |
Units |
|
(Note 5) |
(Note 4) |
(Note 5) |
|||||
|
|
|
|
||||
|
|
|
|
|
|
|
|
VREF |
Reference Voltage |
LM1117-ADJ |
|
|
|
|
|
|
|
IOUT = 10mA, VIN-VOUT = 2V, TJ = 25˚C |
1.238 |
1.250 |
1.262 |
V |
|
|
|
10mA ≤ IOUT ≤ 800mA, 1.4V ≤ VIN-VOUT |
1.225 |
1.250 |
1.270 |
V |
|
|
|
≤ 10V |
|
|
|
|
|
|
|
|
|
|
|
|
|
VOUT |
Output Voltage |
LM1117-1.8 |
|
|
|
|
|
|
|
IOUT = 10mA, VIN = 3.8V, TJ = 25˚C |
1.782 |
1.800 |
1.818 |
V |
|
|
|
0 ≤ IOUT ≤ 800mA, 3.2V ≤ VIN ≤ 10V |
1.746 |
1.800 |
1.854 |
V |
|
|
|
LM1117-2.5 |
|
|
|
|
|
|
|
IOUT = 10mA, VIN = 4.5V, TJ = 25˚C |
2.475 |
2.500 |
2.525 |
V |
|
|
|
0 ≤ IOUT ≤ 800mA, 3.9V ≤ VIN ≤ 10V |
2.450 |
2.500 |
2.550 |
V |
|
|
|
LM1117-2.85 |
|
|
|
|
|
|
|
IOUT = 10mA, VIN = 4.85V, TJ = 25˚C |
2.820 |
2.850 |
2.880 |
V |
|
|
|
0 ≤ IOUT ≤ 800mA, 4.25V ≤ VIN ≤ 10V |
2.790 |
2.850 |
2.910 |
V |
|
|
|
0 ≤ IOUT ≤ 500mA, VIN = 4.10V |
2.790 |
2.850 |
2.910 |
V |
|
|
|
LM1117-3.3 |
|
|
|
|
|
|
|
IOUT = 10mA, VIN = 5V TJ = 25˚C |
3.267 |
3.300 |
3.333 |
V |
|
|
|
0 ≤ IOUT ≤ 800mA, 4.75V≤ VIN ≤ 10V |
3.235 |
3.300 |
3.365 |
V |
|
|
|
LM1117-5.0 |
|
|
|
|
|
|
|
IOUT = 10mA, VIN = 7V, TJ = 25˚C |
4.950 |
5.000 |
5.050 |
V |
|
|
|
0 ≤ IOUT ≤ 800mA, 6.5V ≤ VIN ≤ 12V |
4.900 |
5.000 |
5.100 |
V |
|
∆VOUT |
Line Regulation |
LM1117-ADJ |
|
|
|
|
|
|
(Note 6) |
IOUT = 10mA, 1.5V ≤ VIN-VOUT ≤ 13.75V |
|
0.035 |
0.2 |
% |
|
|
|
LM1117-1.8 |
|
1 |
6 |
mV |
|
|
|
IOUT = 0mA, 3.2V ≤ VIN ≤ 10V |
|
|
|
|
|
|
|
LM1117-2.5 |
|
1 |
6 |
mV |
|
|
|
IOUT = 0mA, 3.9V ≤ VIN ≤ 10V |
|
|
|
|
|
|
|
LM1117-2.85 |
|
|
|
|
|
|
|
IOUT = 0mA, 4.25V ≤ VIN ≤ 10V |
|
1 |
6 |
mV |
|
|
|
LM1117-3.3 |
|
|
|
|
|
|
|
IOUT = 0mA, 4.75V ≤ VIN ≤ 15V |
|
1 |
6 |
mV |
|
|
|
LM1117-5.0 |
|
|
|
|
|
|
|
IOUT = 0mA, 6.5V ≤ VIN ≤ 15V |
|
1 |
10 |
mV |
www.national.com |
4 |
LM1117 Electrical Characteristics (Continued)
Typicals and limits appearing in normal type apply for TJ = 25˚C. Limits appearing in Boldface type apply over the entire junction temperature range for operation, 0˚C to 125˚C.
Symbol |
Parameter |
Conditions |
Min |
Typ |
Max |
Units |
|
(Note 5) |
(Note 4) |
(Note 5) |
|||||
|
|
|
|
||||
|
|
|
|
|
|
|
|
∆VOUT |
Load Regulation |
LM1117-ADJ |
|
|
|
|
|
|
(Note 6) |
VIN-VOUT = 3V, 10 ≤ IOUT ≤ 800mA |
|
0.2 |
0.4 |
% |
|
|
|
LM1117-1.8 |
|
1 |
10 |
mV |
|
|
|
VIN = 3.2V, 0 ≤ IOUT ≤ 800mA |
|
|
|
|
|
|
|
LM1117-2.5 |
|
1 |
10 |
mV |
|
|
|
VIN = 3.9V, 0 ≤ IOUT ≤ 800mA |
|
|
|
|
|
|
|
LM1117-2.85 |
|
|
|
|
|
|
|
VIN = 4.25V, 0 ≤ IOUT ≤ 800mA |
|
1 |
10 |
mV |
|
|
|
LM1117-3.3 |
|
|
|
|
|
|
|
VIN = 4.75V, 0 ≤ IOUT ≤ 800mA |
|
1 |
10 |
mV |
|
|
|
LM1117-5.0 |
|
|
|
|
|
|
|
VIN = 6.5V, 0 ≤ IOUT ≤ 800mA |
|
1 |
15 |
mV |
|
VIN-V OUT |
Dropout Voltage |
IOUT = 100mA |
|
1.10 |
1.20 |
V |
|
|
(Note 7) |
IOUT = 500mA |
|
1.15 |
1.25 |
V |
|
|
|
IOUT = 800mA |
|
1.20 |
1.30 |
V |
|
ILIMIT |
Current Limit |
VIN-VOUT = 5V, TJ = 25˚C |
800 |
1200 |
1500 |
mA |
|
|
Minimum Load |
LM1117-ADJ |
|
|
|
|
|
|
Current (Note 8) |
VIN = 15V |
|
1.7 |
5 |
mA |
|
|
Quiescent Current |
LM1117-1.8 |
|
5 |
10 |
mA |
|
|
|
VIN ≤ 15V |
|
|
|
|
|
|
|
LM1117-2.5 |
|
5 |
10 |
mA |
|
|
|
VIN ≤ 15V |
|
|
|
|
|
|
|
LM1117-2.85 |
|
|
|
|
|
|
|
VIN ≤ 10V |
|
5 |
10 |
mA |
|
|
|
LM1117-3.3 |
|
|
|
|
|
|
|
VIN ≤ 15V |
|
5 |
10 |
mA |
|
|
|
LM1117-5.0 |
|
|
|
|
|
|
|
VIN ≤ 15V |
|
5 |
10 |
mA |
|
|
Thermal Regulation |
TA = 25˚C, 30ms Pulse |
|
0.01 |
0.1 |
%/W |
|
|
Ripple Regulation |
fRIPPLE =1 20Hz, VIN-VOUT = 3V VRIPPLE |
60 |
75 |
|
dB |
|
|
|
= 1VPP |
|
|
|
|
|
|
Adjust Pin Current |
|
|
60 |
120 |
µA |
|
|
|
|
|
|
|
|
|
|
Adjust Pin Current |
10 ≤ IOUT≤ 800mA, |
|
|
|
|
|
|
Change |
1.4V ≤ VIN-VOUT ≤ 10V |
|
0.2 |
5 |
µA |
|
|
Temperature Stability |
|
|
0.5 |
|
% |
|
|
|
|
|
|
|
|
|
|
Long Term Stability |
TA = 125˚C, 1000Hrs |
|
0.3 |
|
% |
|
|
RMS Output Noise |
(% of VOUT), 10Hz ≤ f ≤10kHz |
|
0.003 |
|
% |
|
|
Thermal Resistance |
3-Lead SOT-223 |
|
15.0 |
|
˚C/W |
|
|
Junction-to-Case |
|
|
|
|
|
|
|
3-Lead TO-220 |
|
3.0 |
|
˚C/W |
||
|
|
|
|
|
|
|
|
|
|
3-Lead TO-252 |
|
10 |
|
˚C/W |
|
|
|
|
|
|
|
|
|
|
Thermal Resistance |
3-Lead SOT-223 (No heat sink) |
|
136 |
|
˚C/W |
|
|
Junction-to-Ambient |
|
|
|
|
|
|
|
3-Lead TO-220 (No heat sink) |
|
79 |
|
˚C/W |
||
|
(No air flow) |
|
|
|
|
|
|
|
3-Lead TO-252 (Note 9) (No heat sink) |
|
92 |
|
˚C/W |
||
|
|
|
|
|
|
|
|
|
|
3-Lead TO-263 |
|
55 |
|
˚C/W |
|
|
|
|
|
|
|
|
|
|
|
8-Lead LLP(Note 10) |
|
40 |
|
˚C/W |
|
|
|
|
|
|
|
|
LM1117/LM1117I
5 |
www.national.com |
LM1117/LM1117I
LM1117I Electrical Characteristics
Typicals and limits appearing in normal type apply for TJ = 25˚C. Limits appearing in Boldface type apply over the entire junction temperature range for operation, −40˚C to 125˚C.
Symbol |
Parameter |
Conditions |
Min |
Typ |
Max |
Units |
|
(Note 5) |
(Note 4) |
(Note 5) |
|||||
|
|
|
|
||||
|
|
|
|
|
|
|
|
VREF |
Reference Voltage |
LM1117I-ADJ |
|
|
|
|
|
|
|
IOUT = 10mA, VIN-VOUT = 2V, TJ = 25˚C |
1.238 |
1.250 |
1.262 |
V |
|
|
|
10mA ≤ IOUT ≤ 800mA, 1.4V ≤ VIN-VOUT |
1.200 |
1.250 |
1.290 |
V |
|
|
|
≤ 10V |
|
|
|
|
|
|
|
|
|
|
|
|
|
VOUT |
Output Voltage |
LM1117I-3.3 |
|
|
|
|
|
|
|
IOUT = 10mA, VIN = 5V, TJ = 25˚C |
3.267 |
3.300 |
3.333 |
V |
|
|
|
0 ≤ IOUT ≤ 800mA, 4.75V ≤ VIN ≤ 10V |
3.168 |
3.300 |
3.432 |
V |
|
|
|
LM1117I-5.0 |
|
|
|
|
|
|
|
IOUT = 10mA, VIN = 7V, TJ = 25˚C |
4.950 |
5.000 |
5.050 |
V |
|
|
|
0 ≤ IOUT ≤ 800mA, 6.5V ≤ VIN ≤ 12V |
4.800 |
5.000 |
5.200 |
V |
|
∆VOUT |
Line Regulation |
LM1117I-ADJ |
|
|
|
|
|
|
(Note 6) |
IOUT = 10mA, 1.5V ≤ VIN-VOUT ≤ 13.75V |
|
0.035 |
0.3 |
% |
|
|
|
LM1117I-3.3 |
|
|
|
|
|
|
|
IOUT = 0mA, 4.75V ≤ VIN ≤ 15V |
|
1 |
10 |
mV |
|
|
|
LM1117I-5.0 |
|
|
|
|
|
|
|
IOUT = 0mA, 6.5V ≤ VIN ≤ 15V |
|
1 |
15 |
mV |
|
∆VOUT |
Load Regulation |
LM1117I-ADJ |
|
|
|
|
|
|
(Note 6) |
VIN-VOUT = 3V, 10 ≤ IOUT ≤ 800mA |
|
0.2 |
0.5 |
% |
|
|
|
LM1117I-3.3 |
|
|
|
|
|
|
|
VIN = 4.75V, 0 ≤ IOUT ≤ 800mA |
|
1 |
15 |
mV |
|
|
|
LM1117I-5.0 |
|
|
|
|
|
|
|
VIN = 6.5V, 0 ≤ IOUT ≤ 800mA |
|
1 |
20 |
mV |
|
VIN-V OUT |
Dropout Voltage |
IOUT = 100mA |
|
1.10 |
1.30 |
V |
|
|
(Note 7) |
IOUT = 500mA |
|
1.15 |
1.35 |
V |
|
|
|
IOUT = 800mA |
|
1.20 |
1.40 |
V |
|
ILIMIT |
Current Limit |
VIN-VOUT = 5V, TJ = 25˚C |
800 |
1200 |
1500 |
mA |
|
|
Minimum Load |
LM1117I-ADJ |
|
|
|
|
|
|
Current (Note 8) |
VIN = 15V |
|
1.7 |
5 |
mA |
|
|
Quiescent Current |
LM1117I-3.3 |
|
|
|
|
|
|
|
VIN ≤ 15V |
|
5 |
15 |
mA |
|
|
|
LM1117I-5.0 |
|
|
|
|
|
|
|
VIN ≤ 15V |
|
5 |
15 |
mA |
|
|
Thermal Regulation |
TA = 25˚C, 30ms Pulse |
|
0.01 |
0.1 |
%/W |
|
|
Ripple Regulation |
fRIPPLE =1 20Hz, VIN-VOUT = 3V VRIPPLE |
60 |
75 |
|
dB |
|
|
|
= 1VPP |
|
|
|
|
|
|
Adjust Pin Current |
|
|
60 |
120 |
µA |
|
|
|
|
|
|
|
|
|
|
Adjust Pin Current |
10 ≤ IOUT≤ 800mA, |
|
|
|
|
|
|
Change |
1.4V ≤ VIN-VOUT ≤ 10V |
|
0.2 |
10 |
µA |
|
|
Temperature Stability |
|
|
0.5 |
|
% |
|
|
|
|
|
|
|
|
|
|
Long Term Stability |
TA = 125˚C, 1000Hrs |
|
0.3 |
|
% |
|
|
RMS Output Noise |
(% of VOUT), 10Hz ≤ f ≤10kHz |
|
0.003 |
|
% |
|
|
Thermal Resistance |
3-Lead SOT-223 |
|
15.0 |
|
˚C/W |
|
|
Junction-to-Case |
|
|
|
|
|
|
|
3-Lead TO-252 |
|
10 |
|
˚C/W |
||
|
|
|
|
|
|
|
|
|
Thermal Resistance |
3-Lead SOT-223 (No heat sink) |
|
136 |
|
˚C/W |
|
|
Junction-to-Ambient |
|
|
|
|
|
|
|
3-Lead TO-252 (No heat sink)(Note 9) |
|
92 |
|
˚C/W |
||
|
No air flow) |
|
|
|
|
|
|
|
8-Lead LLP(Note 10) |
|
40 |
|
˚C/W |
||
|
|
|
|
|
|
|
Note 1: Absolute Maximum Ratings indicate limits beyond which damage to the device may occur. Operating Ratings indicate conditions for which the device is intended to be functional, but specific performance is not guaranteed. For guaranteed specifications and the test conditions, see the Electrical Characteristics.
www.national.com |
6 |
Note 2: The maximum power dissipation is a function of TJ(max) , θJA, and TA. The maximum allowable power dissipation at any ambient temperature is PD = (TJ(max)–TA)/θJA. All numbers apply for packages soldered directly into a PC board.
Note 3: For testing purposes, ESD was applied using human body model, 1.5kΩ in series with 100pF.
Note 4: Typical Values represent the most likely parametric norm.
Note 5: All limits are guaranteed by testing or statistical analysis.
Note 6: Load and line regulation are measured at constant junction room temperature.
Note 7: The dropout voltage is the input/output differential at which the circuit ceases to regulate against further reduction in input voltage. It is measured when the output voltage has dropped 100mV from the nominal value obtained at VIN = VOUT +1.5V.
Note 8: The minimum output current required to maintain regulation.
Note 9: Minimum pad size of 0.038in2
Note 10: Thermal Performance for the LLP was obtained using JESD51-7 board with six vias and an ambient temperature of 22˚C. For information about improved thermal performance and power dissipation for the LLP, refer to Application Note AN-1187.
Typical Performance Characteristics
Dropout Voltage (VIN-V OUT) |
Short-Circuit Current |
10091922 10091923
Load Regulation LM1117-ADJ Ripple Rejection
10091943
10091906
LM1117/LM1117I
7 |
www.national.com |
Loading...