MICROCIRCUIT DATA SHEET
MNLM136A-2.5-X-RH REV 0E0
Original Creation Date: 12/03/99
Last Update Date: 02/13/03
Last Major Revision Date:
2.5V REFERENCE DIODE, GUARANTEED TO 100K RAD(Si)
TESTED TO MIL-STD-883, METHOD 1019.5
General Description
The LM136A-2.5 integrated circuit is a precision 2.5V shunt regulator diode. This monolithic IC voltage reference operates as a low-temperature-coefficient 2.5V zener with 0.2 Ohms dynamic impedance. A third terminal on the LM136A-2.5 allows the reference voltage and temperature coefficient to be trimmed easily.
The LM136A-2.5 is useful as a precision 2.5V low voltage reference for digital voltmeters, power supplies or op amp circuitry. The 2.5V makes it convenient to obtain a stable reference from 5V logic supplies. Further, since the LM136A-2.5 operates as a shunt regulator, it can be used as either a positive or negative voltage reference.
Industry Part Number |
NS Part Numbers |
LM136A |
LM136AH-2.5-SMD |
|
LM136AH-2.5/883 |
Prime Die |
LM136AH-2.5RQML |
LM136AH-2.5RQV |
|
LM136 |
|
Controlling Document |
|
SEE FEATURES SECTION |
|
Processing |
Subgrp Description |
Temp ( oC) |
||
MIL-STD-883, Method 5004 |
1 |
Static tests at |
+25 |
|
|
2 |
Static tests at |
+125 |
|
Quality Conformance Inspection |
3 |
Static tests at |
-55 |
|
4 |
Dynamic tests at |
+25 |
||
|
5 |
Dynamic tests at |
+125 |
|
MIL-STD-883, Method 5005 |
6 |
Dynamic tests at |
-55 |
|
7 |
Functional tests at |
+25 |
||
|
||||
|
8A |
Functional tests at |
+125 |
|
|
8B |
Functional tests at |
-55 |
|
|
9 |
Switching tests at |
+25 |
|
|
10 |
Switching tests at |
+125 |
|
|
11 |
Switching tests at |
-55 |
|
|
|
|
|
1
MNLM136A-2.5-X-RH REV 0E0 |
MICROCIRCUIT DATA SHEET |
Features
-Low temperature coefficient
-Wide operating current of 400uA to 10mA
-0.2 Ohms dynamic impedance
-+1% initial tolerance available
-Guaranteed temperature stability
-Easily trimmed for minimum temperature drift
-Fast turn-on
-Three lead transistor package
CONTROLLING DOCUMENTS:
LM136AH-2.5-SMD 5962-0050101QXA
LM136AH-2.5/883 8418003XA
LM136AH-2.5RQML 5962R0050101QXA
LM136AH-2.5RQV 5962R0050101VXA
2
MNLM136A-2.5-X-RH REV 0E0 MICROCIRCUIT DATA SHEET
(Absolute Maximum Ratings)
(Note 1) |
|
|
Reverse Current |
15mA |
|
|
|
|
Forward Current |
10mA |
|
|
|
|
Storage Temperature |
-60 |
C to +150 C |
|
||
Operating Ambient Temperature |
|
|
(Note 2) |
-55 |
C to +125 C |
|
||
Maximum Junction Temperture |
|
|
(Note 2) |
150 |
C |
|
||
Lead Temperature |
|
|
(Soldering, 10 seconds) |
300 |
C |
Thermal Resistance |
|
|
ThetaJA |
|
|
(Still Air Flow) |
354 |
C/W |
(500LF/Min Air Flow) |
77 |
C/W |
ThetaJC |
46 |
C/W |
Package Weight |
|
|
(Typical) |
TBD |
|
ESD Rating (Note 3)
1000V
Note 1: Absolute Maximum Ratings indicate limits beyond which damage to the device may occur. Operating Ratings indicate conditions for which the device is functional, but do not guaranteed specific performance limits. For guaranteed specifications and test conditions, see the Electrical Characteristics. The guaranteed specifications apply only for the test conditions listed. Some performance characteristics may degrade when the device is not operated under the listed test conditions.
Note 2: The maximum power dissipation must be derated at elevated temperatures and is dictated by Tjmax (maximum junction temperature), ThetaJA (package junction to ambient thermal resistance), and TA (ambient temperature). The maxium allowable power dissipation at any temperature is Pdmax = (Tjmax - TA) /ThetaJA or the number given in the Absolute Maximum Ratings, whichever is lower.
Note 3: Human body model, 1.5K Ohms in series with 100pF.
3