Honeywell 5113G, 5112DOJ, 5112G, 5112GDOJ, 5112 User Manual

ENGLISH

Operation & Installation Guide

Steel Security Safe

with Programmable Digital Lock

Models 5103S-5107S / 5103-5108 / 5112DOJ / 5112-5113 / 5103GS-5107GS / 5103G-5108G / 5112G-DOJ / 5112G-5113G

Read this manual carefully and never store it inside the safe!

Index

Welcome / Package Contents .........................................................................	Page 1
Override Access Key / Install Batteries...........................................................	Page 2
Locking Safe / Unlocking Safe.........................................................................	Page 3
Entering The Wrong Code / Secure Lockout Period /
If You Forget Your Passcode............................................................................	Page 4
Replacing Batteries / Care and Maintenance / Removable Shelf................	Page 5
Anchoring Your Safe.........................................................................................	Page 6
Consumer Assistance..............................................................................	Page 7
Ordering Additional Keys / Safe Identification Record..............................	Page 8
Notes.......................................................................................................	Page 9
Warranty Information...............................................................................	Back Cover

For Your Protection

•Do not remove the Serial Number tag from the safe.

•Never Store Override Access Keys inside safe.

•Record all Safe Identification Numbers on Safe Identification Record (page 8).

•Save this manual and NEVER keep it inside the safe.

WELCOME

Your Honeywell Steel Security Safe will provide years of safe and secure protection for your valuables, important documents and other personal items. All Honeywell safes are designed and built using the highest manufacturing standards to ensure maximum user satisfaction under a variety of conditions. With proper care, your Honeywell safe will provide “Peace of Mind” for many years to come.

Thank you and enjoy!

PACKAGE CONTENTS

The following list outlines the items and quantities of each included with your new safe. Please carefully check the list to confirm all items have been received. If any item is missing, please contact Consumer Assistance (See page 7 for contact information).

Operation Manual (1 ea.) Override Access Keys (2 ea.) “AA” Batteries (4 ea.) Mounting Hardware (1 set)

1

GHI 4

PRS 7

CLEAR

ABC 2

JKL 5

TUV 8

OPER 0

DEF 3

MNO 6

WXY 9

LOCK

Attention: DO NOT RETURN SAFE TO STORE

If you are missing parts or have difficulty operating your safe, please contact our Consumer Assistance Department by telephone. Store will not accept returned products without prior authorization. You must first contact our consumer assistance department. (See page 7 for contact information)

1

OVERRIDE ACCESS KEY

Your safe is equipped with an override access key which allows immediate access in case you forget your user codes or the batteries need to be installed or replaced. There are 2 versions of this safe, one in which the key turns to the left and another in which the key turns to the right.

1.Remove override key cover with small screwdriver (Figure 1).

2.Insert override key and turn left (or right for some versions) to unlock safe (Figure 2).

3.Pull door open using handle located at the bottom of the keypad (Figure 3).

4.Remove override access key and store it in a safe place away from the safe. Replace the cover over the key lock and proceed to “Install Batteries” (Figure 4).

1	ABC	DEF
	2	3
HI	JKL5	MNO
		6
S	TUV	WXY
	8	9
AR	OPER0	LOCK

Figure 1

ABC	DEF
2	3
JKL	MNO
5	6
TUV	WXY
8
OPER0

Figure 2

Figure 3

Figure 4

INSTALL BATTERIES

For your convenience, we have included 4 “AA” batteries that provide the power for the electronic locking system. These batteries must be installed before using your safe. The battery compartment is located inside the safe on the lock cover panel.

1.Remove battery compartment cover on inside door (Figure 1).

2.Insert 4 “AA” batteries (included). Ensure the batteries are installed in the correct direction, with regard to polarity (+ and -) (Figure 2).

3.Replace the battery cover (Figure 3).

4.Proceed to the “Locking Safe” section on next page.

- +

+ -

AA

AA

-	+
+	-

AA

AA

- +

Figure 1

Figure 2

Figure 3

2