Limited Warranty |
Operation & Installation Guide |
|
|
LIFETIME AFTER FIRE REPLACEMENT GUARANTEE
If your Honeywell Firesafe is ever damaged by a fire, SISCO® will replace it with a comparable model at no charge to the consumer. Freight on the replacement unit is not included in the guarantee and must be paid by the consumer.
For claims, submit your name and address, a photo of the damaged safe along with its Model Number, and a copy of the Fire Department report to SISCO Customer Service as proof of loss. Once the information is received, Customer Service will contact you with further instructions.
MHML8792E0807
ENGLISH
LIMITED WARRANTY
If your Honeywell safe fails to operate because of a manufacturing defect any time up to five (5) years from the date of original purchase, we will, at our discretion, repair or replace the unit at no charge to the original owner. A copy of your sales receipt is required as Proof of Purchase.
The consumer must first contact SISCO Customer Service (800-223-8566, USA and Canada; 310-638-1182 outside of USA and Canada, or via E-mail at customerservice@honeywellsafes.com) during the Term of the Limited Warranty for authorization on the repair or replacement of the safe. For the repair of the safe, SISCO Customer Service may provide approval for taking it to a local locksmith. For the replacement of the safe, the consumer must return it, prepaid, to SISCO
(2835 E. Ana St., Rancho Dominguez, CA 90221). SISCO will replace the safe with a comparable model, shipping prepaid.
WHAT IS NOT COVERED
SISCO’s responsibility and the consumer’s rights are limited to the repair or replacement of the defective safe, as stated above.
This Warranty does not apply if the product has been damaged by improper installation, neglect, accident, misuse, exposure to extremes of heat or humidity, terrorism, war, acts of God, or as a result of service or modification by other than an authorized service center. While your SISCO safe is warranted to be free of mechanical defect during the Term of Limited Warranty, the Warranty does not apply to the finish of the safe.
SISCO is not responsible for any costs associated with removing or installing this product.
SISCO is not responsible for damage or loss of the contents of the safe nor for the unauthorized removal of contents.
SISCO is not responsible for any damages incurred to the safe during shipment.
This Limited Warranty applies only to new SISCO safes, purchased by the original owner, and is not transferable to second owners or “factory seconds” safes purchased by the consumer.
No implied Warranty of salability or fitness exists other than those descriptions provided on the packaging, instructions and advertising. No other covenants or warranties, either implied or stated, written or oral, are hereby present. Some states do not allow limitations on how long an implied Warranty lasts, so the above limitations may not apply to you.
Honeywell Firesafes that include a Mounting Kit must be installed according to the Instructions provided. Any permanent installation of the safe which penetrates the insulation material of a fire insulated product voids the Warranty.
This Warranty gives you specific rights and you may also have other rights which vary from state to state.
Honeywell and/or Protector™ Fire Insulated Safes are tested by Underwriters’ Laboratory or Japan Industrial Standards to protect internal contents during a fire at varying degrees of temperature and varying lengths of time. For more information concerning the coverage for your particular safe, contact SISCO Customer Service at 800-223-8566 (USA and Canada).
The Honeywell trademark for Home/Office Safes is used with permission. Honeywell Safes are distributed exclusively by SISCO. Honeywell makes no representations or warranties with respect to this product or service. The Honeywell Trademark is used under license from Honeywell Intellectual
Properties Inc. by SISCO.
Model 2087 / 2087E
Model 2092 / 2092E
with Emergency Override Key
Read These Instructions Very Carefully!
Home and Office Security Safes
Index |
Safe Identification Record |
|
|
Overview of Your Safe ................................... |
Page 1 |
Opening Safe For The First Time................ |
Page 2 |
Emergency Override Key ............................. |
Page 3 |
Use, Care and Maintenance ......................... |
Page 4 |
Customer Support ........................................... |
Page 5 |
For Your Protection
•Do not remove the Serial Number tag from the safe.
•Store Emergency Override Keys away from (NEVER INSIDE) safe.
•Record all Safe Identification Numbers on Safe Identification Record (last page).
•Save this manual and NEVER keep it inside the safe.
Recovering Lost Combinations
The following information is needed to provide you with your combination:
•Name / Address / Telephone
•Safe Model Number / Serial Number
•Key Number (located on the key and on the Emergency Override Key lock)
•E-mail address if available
Model Number
Serial Number
Key Number
4-Number Combination
LEFT FOUR (4) turns and continue to:
RIGHT TWO (2) turns and continue to:
LEFT ONE (1) turn and continue to:
RIGHT to:
|
Home and Office Security Safes |
9 |
|
|
|
|
|
|
Loading...