Operation & Installation Guide
HM-HFS-SBE
ENGLISH
Model 2054SB
Model 2084SB
Model 2118SB
BIOMETRIC
FINGERPRINT
FIRESAFES
with Key Lock
Read These Instructions Very Carefully!
Customer Service 1-800-223-8566 (USA & Canada)
Index
Overview of Your Safe ......................................... |
Page 1 |
Programming Preparation ................................. |
Page 2 |
Step 1. Installing Batteries |
|
Step 2. Opening Safe with Override Key |
|
Fingerprint Programming .................................. |
Page 3 |
Step 3. Programming a Fingerprint |
|
Programming Tips .................................................. |
Page 4 |
Opening Fingerprint Safe .................................. |
Page 5 |
Open Safe with Fingerprint Access |
|
Open Safe with Override Key |
|
Programming Additional Fingerprints ....... |
Page 6 |
Deleting & Adding Fingerprints ..................... |
Page 6 |
Additional Features: Shelves............................. |
Page 7 |
Additional Features: Bolt-Down Kit ............. |
Page 8 |
Customer Support .................................................. |
Page 10 |
Use, Care and Maintenance ............................. |
Page 12 |
For Your Protection
•Do not remove the serial number tag from the safe.
•Always store keys away from (AND NEVER INSIDE) safe.
•Record all safe identification #’s on I.D. Form (last page).
•Save this manual and NEVER keep it inside the safe.
Overview of Your Safe
Congratulations!
Your new Honeywell Firesafe will provide years of safe and secure storage for valuables and important documents. Your safe has been built with the highest manufacturing standards to ensure maximum user satisfaction under a variety of conditions. We have also created this comprehensive and easy-to-use set of operation and installation instructions to give you complete understanding and confidence in the use of your safe.
Package Contents
All Models
1 – Honeywell Fingerprint Firesafe
1 – Operation & Installation Guide
1 – Emergency Override Key
2 – Companion Entry Keys
4 – AA Batteries
Models 2054SB (only)
1 – Bolt-Down Kit Including:
1 – Mounting Template
4 – Break-off Bolts
4 – Washers
Models 2054SB (only)
1 – Removable Shelf
Models 2084SB & 2118SB
1 – Adjustable Shelf
4 – Shelf Support Clips
Important: DO NOT RETURN SAFE TO STORE
If you have difficulty programming the safe or any other questions pertaining to proper use, DO NOT RETURN your safe to the store. Please Contact Customer Service at 1-800-223-8566 (USA & Canada) for assistance.
Home and Office Security Safes |
1 |
|
|
Programming Preparation
Step 1. Installing Batteries
BATTERY
The biometric fingerprint sensing function is powered by COMPARTMENT 4 “AA” batteries which must be installed before you can
begin scanning and programming fingerprints. For your convenience, we have provided you with 4 “AA” batteries. For best results and depending on use, we recommend replacing the batteries at least once a year.
1.Locate battery compartment to the lower right of the Fingerprint Scan Pad.
2.To open the compartment, press firmly in on the battery cover and slide it to the right for removal.
3.Install 4 new “AA” batteries in the battery compartment. Make sure they are installed in the correct direction as marked on the inside of the battery compartment.
4.Once the batteries are installed properly, replace the cover by sliding it back on from the left.
Important: BATTERY REMOVAL
If the batteries are removed or fail, the fingerprint memory will NOT be erased.
Step 2. Open Safe with Override Key (square top)
You will need access to the inside of the safe door to begin fingerprint programming. You must use the Emergency Override Key (square top) to open the door for the first time.
1. Insert the Emergency Override Key (square top) in the
lock, turn to the left (counterclockwise) and pull the door open.
Important: TURN OVERRIDE KEY TO LEFT ONLY
When using the Emergency Override Key, you must ONLY TURN IT TO THE LEFT. Turning it to the right may cause key to become stuck in the cylinder and may cause damage to the lock.
2
Fingerprint Programming
Step 3. Programming a Fingerprint
Your new Fingerprint Firesafe features enough memory to program up to 10 different fingerprints for active authorized access.
1.Locate the memory button marked on the inside of the door.
2.Using a pen or other blunt tip, quickly push and release the memory button.
3.It will “beep” and the scan pad will light up.
.
4.Immediately after you hear the “beep”, SLOWLY and firmly scan your finger on the pad in a downward motion.
5.It will “beep” again and you must repeat the scan process using the same finger and motion.
6.After another “beep”, you must repeat the scanning process for a third and final time.
7.When you have successfully completed the 3 scans, you will then hear a very short “chime“
confirming your fingerprint is now programmed.
If you do not hear the short “chime”, then you should repeat steps 2-6. If you experience any difficulties while attempting to program your safe, please read the “Programming Tips” section on the following page.
MEMORY
BUTTON
SCAN PAD
REPEAT 3
TIMES
Important: SECURITY LOCKOUT PERIOD
For added security, the safe will automatically “Lockout” entry if five attempts to scan fingerprint are unsuccessful.
During this “Lockout” period (approximately 5 minutes), entry MUST BE MADE using the emergency override key.
Home and Office Security Safes |
3 |
|
|