Loading...
B E O S O U N D 4 0 0 0
2
CAUTION: To reduce the risk of electric shock, do not remove cover (or back).
No User-serviceable parts inside. Refer servicing to qualified service personnel.
WARNING: To prevent fire or electric shock, do not expose this appliance to rain or moisture.
This symbol indicates that a dangerous voltage constitut- 
ing a risk of electric shock is present within this unit.
This symbol indicates that there are important operating 
and maintenance instructions in the literature accompanying this unit.
For the US-market only!
NOTE: This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
–Reorient or relocate the receiving antenna.
–Increase the separation between the equipment and receiver.
–Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
–Consult the dealer or an experienced radio/ TV technician for help.
For the Canadian market only:
This class B digital apparatus meets all requirements of the Canadian InterferenceCausing Equipment Regulations.
B E O S O U N D 4 0 0 0 |
3 |
|
This Setting-up guide explains how to assemble your BeoSound 4000 and make it ready for use. It describes how to set up the system with a pair of matching Beolab 2500 speakers or, as an alternative, with a pair of active Bang & Olufsen loudspeakers.
The BeoSound 4000 may also be used in a Bang & Olufsen A/V system. Please contact your Bang & Olufsen dealer.
We recommend that you follow the instructions in this guide carefully.
Please refer to the BeoSound 4000 User's guide (also enclosed) for detailed operating instructions.
Contents
4Before you start…
5Placement
6Connections
9Assembling
10Ready for use…
12Maintenance
NOTE: Do not connect the BeoSound 4000 to the mains before you have finished the setting-up procedure!
4 |
B E F O R E Y O U S T A R T … |
|
Make sure that the following parts are available before you start setting up the BeoSound 4000:
•one set of glass doors (left and right).
•one cable cover, for concealing and holding the cables on the rear of the BeoSound 4000.
•one lead for connection to the mains.
•a pair of active Bang & Olufsen speakers with connectors.
When you set up your system, we suggest you use the following sequence:
1Place the BeoSound 4000 where you want to use it.
2Set up your speakers and any auxiliary equipment.
3Connect all cables to their sockets on the rear panel of the BeoSound 4000 (only, remember not to connect the system to the mains yet!).
4Arrange the cables in the cable cover grooves, and attach the cover to the rear of the BeoSound 4000.
5Attach the glass doors.
6Connect the system to the mains.
Complete the setting-up procedure as described in the section Ready for use… and make your presettings of sound levels, favourite radio stations, etc. as described in the BeoSound 4000 User's guide.
P L A C E M E N T |
5 |
|
Your BeoSound 4000 is designed for a variety of placements. Its compactness facilitates placement next to your favourite listening position, which is also optimal for close-up operation of the system. It can be placed on a special stand, on a shelf or a table – or hanging off the wall (using the optional wall bracket). Please contact your Bang & Olufsen dealer for further information about optional accessories.
The BeoSound 4000 is designed for use in dry environments only. Avoid placing the system in direct sunlight, near radiators or other sources of heat. Place the BeoSound 4000 so that ventilation will not be impeded – and, in case you set up your system with alternative active speakers, remember to leave enough space at the sides of the BeoSound 4000 for the glass doors to open and close.
The BeoSound 4000 is placed on the optional stand (with an alternative pair of active loudspeakers). The stand accommodates compact discs and tape cassettes.
The slim cabinet allow placement in confined places. However, don’t forget to leave enough space above and to the sides of the BeoSound 4000 to provide sufficient ventilation.
Loading...