4-265-633- (1)
Digital Still Camera / Instruction Manual |
GB |
|
|
Cámara fotografía digital / Manual de instrucciones |
ES |
DSC-TX100/TX100V
English
Owner’s Record
The model and serial numbers are located on the bottom. Record the serial number in the space provided below. Refer to these numbers whenever you call your Sony dealer regarding this product.
Model No. DSC-TX100/TX100V
Serial No. ______________________________
Model No. AC-UB10/UB10B
Serial No. ______________________________
WARNING
To reduce fire or shock hazard, do not expose the unit to rain or moisture.
IMPORTANT SAFETY INSTRUCTIONS -SAVE THESE INSTRUCTIONS DANGER
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, CAREFULLY FOLLOW THESE INSTRUCTIONS
If the shape of the plug does not fit the power outlet, use an attachment plug adaptor of the proper configuration for the power outlet.
CAUTION
[ Battery pack
If the battery pack is mishandled, the battery pack can burst, cause a fire or even chemical burns. Observe the following cautions.
•Do not disassemble.
•Do not crush and do not expose the battery pack to any shock or force such as hammering, dropping or stepping on it.
•Do not short circuit and do not allow metal objects to come into contact with the battery terminals.
•Do not expose to high temperature above 60°C (140°F) such as in direct sunlight or in a
GB car parked in the sun.
2 • Do not incinerate or dispose of in fire.
•Do not handle damaged or leaking lithium ion batteries.
•Be sure to charge the battery pack using a genuine Sony battery charger or a device that can charge the battery pack.
•Keep the battery pack out of the reach of small children.
•Keep the battery pack dry.
•Replace only with the same or equivalent type recommended by Sony.
•Dispose of used battery packs promptly as described in the instructions.
[ AC Adaptor
Connect the AC Adaptor to the nearest wall outlet (wall socket). |
GB |
|
|
||
If some trouble occurs while using the AC Adaptor, immediately shut off the power by |
|
|
disconnecting the plug from the wall outlet (wall socket). |
|
|
The power cord (mains lead), if supplied, is designed specifically for use with this camera |
|
|
only, and should not be used with other electrical equipment. |
|
|
For Customers in the U.S.A. and Canada
[ RECYCLING LITHIUM-ION BATTERIES
Lithium-Ion batteries are recyclable.
You can help preserve our environment by returning your used rechargeable batteries to the collection and recycling location nearest you.
For more information regarding recycling of rechargeable batteries, call toll free
1-800-822-8837, or visit http://www.rbrc.org/
Caution: Do not handle damaged or leaking Lithium-Ion batteries.
[ Battery pack
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
This Class B digital apparatus complies with Canadian ICES-003.
For Customers in the U.S.A.
UL is an internationally recognized safety organization.
The UL Mark on the product means it has been UL Listed.
If you have any questions about this product, you may call: |
|
Sony Customer Information Center |
|
1-800-222-SONY (7669). |
GB |
The number below is for the FCC related matters only. |
3 |
[ Regulatory Information
Declaration of Conformity
Trade Name: SONY
Model No.: DSC-TX100V
Responsible Party: Sony Electronics Inc.
Address: 16530 Via Esprillo,
San Diego, CA 92127 U.S.A.
Telephone No.: 858-942-2230
This device complies with Part15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
[ CAUTION
You are cautioned that any changes or modifications not expressly approved in this manual could void your authority to operate this equipment.
[ Note:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
–Reorient or relocate the receiving antenna.
–Increase the separation between the equipment and receiver.
–Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
–Consult the dealer or an experienced radio/TV technician for help.
The supplied interface cable must be used with the equipment in order to comply with the limits for a digital device pursuant to Subpart B of Part 15 of FCC Rules.
GB
4
For Customers in Europe
Hereby, Sony Corporation, declares that this DSC-TX100V Digital Still Camera is in compliance with the essential requirements and other relevant provisions of the Directive 1999/5/EC. For details, please access the following URL: GB http://www.compliance.sony.de/
[ Notice for the customers in the countries applying EU Directives
The manufacturer of this product is Sony Corporation, 1-7-1 Konan Minato-ku Tokyo, 108-0075 Japan. The Authorized Representative for EMC and product safety is Sony Deutschland GmbH, Hedelfinger Strasse 61, 70327 Stuttgart, Germany. For any service or guarantee matters please refer to the addresses given in separate service or guarantee documents.
This product has been tested and found compliant with the limits set out in the EMC regulation for using connection cables shorter than 3 meters (9.8 feet).
[ Attention
The electromagnetic fields at the specific frequencies may influence the picture and sound of this unit.
[ Notice
If static electricity or electromagnetism causes data transfer to discontinue midway (fail), restart the application or disconnect and connect the communication cable (USB, etc.) again.
[Disposal of Old Electrical & Electronic Equipment (Applicable in the European Union and other European countries with separate
collection systems)
This symbol on the product or on its packaging indicates that this product shall not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling
of this product. The recycling of materials will help to conserve natural resources. For more detailed information about recycling of this product,
please contact your local Civic Office, your household waste disposal service or the shop where you purchased the product.
GB
5
[ Disposal of waste batteries (applicable in the European Union and other European countries with separate collection systems)
This symbol on the battery or on the packaging indicates that the battery provided with this product shall not be treated as household waste.
On certain batteries this symbol might be used in combination with a chemical symbol. The chemical symbols for mercury (Hg) or lead (Pb) are added if the battery contains more than 0.0005% mercury or 0.004% lead. By ensuring these batteries are disposed of correctly, you will help prevent
potentially negative consequences for the environment and human health which could otherwise be caused by inappropriate waste handling of the battery. The recycling of the materials will help to conserve natural resources.
In case of products that for safety, performance or data integrity reasons require a permanent connection with an incorporated battery, this battery should be replaced by qualified service staff only. To ensure that the battery will be treated properly, hand over the product at end-of-life to the applicable collection point for the recycling of electrical and electronic equipment.
For all other batteries, please view the section on how to remove the battery from the product safely.
Hand the battery over to the applicable collection point for the recycling of waste batteries. For more detailed information about recycling of this product or battery, please contact your local Civic Office, your household waste disposal service or the shop where you purchased the product.
Notice for customers in the United Kingdom
A moulded plug complying with BS 1363 is fitted to this equipment for your safety and convenience.
Should the fuse in the plug supplied need to be replaced, a fuse of the same rating as the supplied one and approved by ASTA or BSI to BS 1362, (i.e., marked with an 
or 
mark) must be used.
If the plug supplied with this equipment has a detachable fuse cover, be sure to attach the fuse cover after you change the fuse. Never use the plug without the fuse cover. If you should lose the fuse cover, please contact your nearest Sony service station.
GB
6
Refer to “Cyber-shot User Guide” (HTML) on supplied CD-ROM
For details on advanced operations, please read “Cyber-shot User Guide” (HTML) on the CD-ROM (supplied) using a computer.
Insert the CD-ROM into the CD-ROM drive.
GB 
For Windows users:
1 Click [User Guide] t [Install].
2 Start “User Guide” from the shortcut on the desktop.
For Macintosh users:
1 Select the [User Guide] folder and copy [eng] folder stored in [User Guide] folder to your computer.
2 After copying is complete, double-click “index.html” in [eng] folder.
Checking the supplied items
•Camera (1)
•Rechargeable battery pack NP-BN1 (1)
•Multi-use terminal USB cable (1)
•AC Adaptor AC-UB10/UB10B (1)
•Power cord (mains lead) (not supplied in the USA and Canada) (1)
•Paint pen (1)
•Wrist strap (1)
•CD-ROM (1)
–Cyber-shot application software
–“Cyber-shot User Guide”
•Instruction Manual (this manual) (1)
GB
7
Identifying parts
E Lens
F Self-timer lamp/Smile Shutter lamp/AF illuminator
G Speaker
H 
(Playback) button I Screen/Touch panel
J ON/OFF (Power) button K Shutter button
L For shooting: W/T (Zoom) lever M Hook for wrist strap
N Tripod receptacle
• Use a tripod with a screw less than 5.5 mm (7/32 inches) long. Otherwise, you cannot firmly secure the camera, and damage to the camera may occur.
O Battery eject lever P Battery insertion slot
Q 
(TransferJet™) mark R Battery/memory card cover S Multi connector (Type3b) T Access lamp
U Memory card slot V HDMI connector W Connector cover
A Flash
B Lens cover
C Microphone
D GPS sensor (built-in, DSC-
GB |
TX100V only) |
|
8 |
||
|
Inserting the battery pack
Eject lever
GB 
1 Open the cover.
2Insert the battery pack.
•While pressing the battery eject lever, insert the battery pack as illustrated. Make sure that the battery eject lever locks after insertion.
Charging the battery pack
For customers in the USA,
Canada
Power cord |
Power/Charge lamp |
(Mains lead) |
|
|
Lit: Charging |
For customers in countries/regions |
Off: Charging finished |
other than the USA and Canada |
Flash: Charging error |
GB
9
1Connect the camera and the AC Adaptor (supplied), using the multi-use terminal USB cable (supplied).
2 Connect the AC Adaptor to the wall outlet (wall socket).
The Power/Charge lamp lights orange, and charging starts.
•Turn off the camera while charging the battery.
•You can charge the battery pack even when it is partially charged.
•When the Power/Charge lamp flashes and charging is not finished, remove and re-insert the battery pack.
Notes
•When the Power/Charge lamp on the camera does not lit even if the AC Adaptor is connected to the camera and the wall outlet (wall socket), it indicates that the charging stops temporarily on standby. The charging stops and enters the standby status automatically when the temperature is outside of the recommended operating temperature. When the temperature gets back within the appropriate range, the charging resumes. We recommend charging the battery pack in an ambient temperature of between 10°C to 30°C (50ºF to 86ºF).
•Connect the AC Adaptor (supplied) to the nearest wall outlet (wall socket). If any malfunctions occur while using the AC Adaptor, disconnect the plug from the wall outlet (wall socket) immediately to disconnect the power source.
•When charging is finished, disconnect the AC Adaptor from the wall outlet (wall socket).
•Be sure to use only genuine Sony brand battery packs, multi-use terminal USB cable (supplied) and AC Adaptor (supplied).
GB
10
x Charging by connecting to a computer
The battery pack can be charged by connecting the camera to a computer using a multi-use terminal USB cable.
GB 
Note
•Note the following points when charging via a computer:
–If the camera is connected to a laptop computer that is not connected to a power source, the laptop battery level decreases. Do not charge for an extended period of time.
–Do not turn on/off or restart the computer, or wake the computer resume from sleep mode when a USB connection has been established between the computer and the camera. The camera may cause a malfunction. Before turning on/off, or restarting the computer or waking the computer from sleep mode, disconnect the camera and the computer.
–No guarantees are made for charging using a custom-built computer or a modified computer.
x Charging time
The charging time is approximately 210 min. using the AC Adaptor (supplied).
Note
•The above charging time applies when charging a fully depleted battery pack at a temperature of 25°C (77°F). Charging may take longer depending on conditions of use and circumstances.
GB
11
x Battery life and number of still images you can record and view
|
Battery life |
Number of images |
|
|
|
Shooting (still images) |
Approx. 110 min. |
Approx. 220 images |
|
|
|
Viewing (still images) |
Approx. 160 min. |
Approx. 3200 images |
|
|
|
Shooting (movies) |
Approx. 55 min. |
— |
|
|
|
Notes
•The above number of still images applies when the battery pack is fully charged. The number of still images may decrease depending on the conditions of use.
•The number of still images that can be recorded is for shooting under the following conditions:
–Using Sony “Memory Stick PRO Duo” (Mark2) media (sold separately)
–The battery pack is used at an ambient temperature of 25°C (77°F).
–[GPS setting]: [Off] (DSC-TX100V only)
•The number for “Shooting (still images)” is based on the CIPA standard, and is for shooting under the following conditions:
(CIPA: Camera & Imaging Products Association)
–[Panel Brightness] is set to [3].
–Shooting once every 30 seconds.
–The zoom is switched alternately between the W and T ends.
–The flash strobes once every two times.
–The power turns on and off once every ten times.
•The battery life for movies applies shooting under the following conditions:
–Movie quality: AVCHD HQ
–When continuous shooting ends because of set limits (page 22), touch 
(Movie button) again and continue shooting. Shooting functions such as the
zoom do not operate.
GB
12
x Supplying power
The camera can be supplied with power from the wall outlet (wall socket) by connecting to the AC Adaptor, using the multi-use terminal USB cable (supplied).
You can import images to a computer without worrying about wearing down the battery pack by connecting the camera to a computer using the multi-use terminal USB cable.
|
GB |
|
Notes |
|
|
|
|
|
•Power cannot be supplied when the battery pack is not inserted in the camera.
•Power supply from the wall outlet (wall socket) is available only when the camera is in playback mode or when a connection is made between the camera and a computer. If the camera is in shooting mode or while you are changing the settings of the camera, power is not supplied even if you make a USB connection using the multi-use terminal USB cable.
•If you connect the camera and a computer using the multi-use terminal USB cable when the camera is in playback mode, the display on the camera is changed from
the playback screen to the USB connection screen. Press 
(Playback) button to switch to the playback screen.
Inserting a memory card (sold separately)
Ensure the notched corner faces correctly.
1 Open the cover.
2Insert the memory card (sold separately).
•With the notched corner facing as illustrated, insert the memory card until it clicks into place.
GB
13
3Close the cover.
•Closing the cover with the battery inserted incorrectly may damage the camera.
x Memory cards that you can use
|
Memory card |
For still images |
For movies |
|
|
|
|
|
Memory Stick PRO Duo |
a |
a (Mark2 only) |
A |
|
|
|
Memory Stick PRO-HG Duo |
a |
a |
|
|
|
|
|
|
Memory Stick Duo |
a |
— |
|
|
|
|
|
SD memory card |
a |
a (Class 4 or faster) |
B |
|
|
|
SDHC memory card |
a |
a (Class 4 or faster) |
|
|
|
|
|
|
SDXC memory card |
a |
a (Class 4 or faster) |
|
|
|
|
•In this manual, products in A are collectively referred to as “Memory Stick Duo” media, and products in B are collectively referred to as SD card.
x To remove the memory card/battery pack
Memory card: Push the memory card in once.
Battery pack: Slide the battery eject lever. Be sure not to drop the battery pack.
Note
•Never remove the memory card/battery pack when the access lamp (page 8) is lit. This may cause damage to data in the memory card/internal memory.
GB
14
Loading...