Sony DSCT2W, DSCT2L, DSCT2B, DSCT2P User Manual

0 (0)

Digital Still Camera
Instruction Manual	GB

DSC-T2

For details on advanced operations, please read “Cybershot Handbook” (PDF) and “Cyber-shot Step-up Guide” on the CD-ROM (supplied) using a computer.

Operating Instructions

Before operating the unit, please read this manual thoroughly, and retain it for future reference.

3-273-227-11(1)

Owner’s Record

The model and serial numbers are located on the bottom. Record the serial number in the space provided below. Refer to these numbers whenever you call upon your Sony dealer regarding this product.

Model No. DSC-T2

Serial No. ___________________________

WARNING

To reduce fire or shock hazard, do not expose the unit to rain or moisture.

For Customers in the U.S.A.

This symbol is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

This symbol is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

IMPORTANT

SAFEGUARDS

For your protection, please read these safety instructions completely before operating the appliance, and keep this manual for future reference.

Carefully observe all warnings, precautions and instructions on the appliance, or the one described in the operating instructions and adhere to them.

Use

[ Power Sources

This set should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of electrical power supplied to your home, consult your dealer or local power company. For those sets designed to operate from battery power, or other sources, refer to the operating instructions.

[ Polarization

This set may be equipped with a polarized ac power cord plug (a plug having one blade wider than the other).

This plug will fit into the power outlet only one way. This is a safety feature. If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact your electrician to have a suitable outlet installed. Do not defeat the safety purpose of the polarized plug by forcing it in.

[ Overloading

Do not overload wall outlets, extension cords or convenience receptacles beyond their capacity, since this can result in fire or electric shock.

[ Object and Liquid Entry

Never push objects of any kind into the set through openings as they may touch dangerous voltage points or short out parts that could result in a fire or electric shock. Never spill liquid of any kind on the set.

[ Attachments

Do not use attachments not recommended by the manufacturer, as they may cause hazards.

[ Cleaning

Unplug the set from the wall outlet before cleaning or polishing it. Do not use liquid cleaners or aerosol cleaners. Use a cloth lightly dampened with water for cleaning the exterior of the set.

Installation

[ Water and Moisture

Do not use power-line operated sets near water – for example, near a bathtub, washbowl, kitchen sink, or laundry tub, in a wet basement, or near a swimming pool, etc.

[ Power-Cord Protection

Route the power cord so that it is not likely to be walked on or pinched by items placed upon or against them, paying particular attention to the plugs, receptacles, and the point where the cord exits from the appliance.

[ Accessories

Do not place the set on an unstable cart, stand, tripod, bracket, or table. The set may fall, causing serious injury to a child or an adult, and serious damage to the set. Use only a cart, stand, tripod, bracket, or table recommended by the manufacturer.

[ Ventilation

The slots and openings in the cabinet are provided for necessary ventilation. To ensure reliable operation of the set, and to protect it from overheating, these slots and openings must never be blocked or covered.

–Never cover the slots and openings with a cloth or other materials.

–Never block the slots and openings by placing the set on a bed, sofa, rug, or other similar surface.

–Never place the set in a confined space, such as a bookcase, or built-in cabinet, unless proper ventilation is provided.

–Do not place the set near or over a radiator or heat register, or where it is exposed to direct sunlight.

[ Lightning

For added protection for this set during a lightning storm, or when it is left unattended and unused for

long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the set due to lightning and power-line surges.

Service

[ Damage Requiring Service

Unplug the set from the wall outlet and refer servicing to qualified service personnel under the following conditions:

–When the power cord or plug is damaged or frayed.

–If liquid has been spilled or objects have fallen into the set.

–If the set has been exposed to rain or water.

–If the set has been subject to excessive shock by being dropped, or the cabinet has been damaged.

–If the set does not operate normally when following the operating instructions. Adjust only those controls that are specified in the operating instructions. Improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the set to normal operation.

–When the set exhibits a distinct change in performance – this indicates a need for service.

[ Servicing

Do not attempt to service the set yourself as opening or removing covers may expose you to dangerous voltage or other hazards.

Refer all servicing to qualified service personnel.

[ Replacement parts

When replacement parts are required, be sure the service technician has used replacement parts specified by the manufacturer that have the same characteristics as the original parts. Unauthorized substitutions may result in fire, electric shock, or other hazards.

[ Safety Check

Upon completion of any service or repairs to the set, ask the service technician to perform routine safety checks (as specified by the manufacturer) to determine that the set is in safe operating condition.

Read this first

CAUTION

Replace the battery with the specified type only. Otherwise, fire or injury may result.

Do not expose the batteries to excessive heat such as sunshine, fire or the like.

For Customers in the U.S.A. and

Canada

[RECYCLING LITHIUM-ION BATTERIES

Lithium-Ion batteries are recyclable.

You can help preserve our environment by returning your used rechargeable batteries to the collection and recycling location nearest you.

For more information regarding recycling of rechargeable batteries, call toll free 1-800-822-8837, or visit http://www.rbrc.org/

Caution: Do not handle damaged or leaking Lithium-Ion batteries.

Battery charger

This power unit is intended to be correctly orientated in a vertical or floor mount position.

For Customers in the U.S.A.

If you have any questions about this product, you may call:

Sony Customer Information Center 1-800-222-SONY (7669)

The number below is for the FCC related matters only.

[ Regulatory Information

Declaration of Conformity

Trade Name: SONY

Model No.: DSC-T2

Responsible Party: Sony Electronics Inc.

Address: 16530 Via Esprillo,

San Diego, CA 92127U.S.A.

Telephone No.: 858-942-2230

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

[ CAUTION

You are cautioned that any changes or modifications not expressly approved in this manual could void your authority to operate this equipment.

[ Note:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

–Reorient or relocate the receiving antenna.

–Increase the separation between the equipment and receiver.

–Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

–Consult the dealer or an experienced radio/TV technician for help.

The supplied interface cable must be used with the equipment in order to comply with the limits for a digital device pursuant to Subpart B of Part 15 of FCC Rules.

[Disposal of Old Electrical & Electronic Equipment (Applicable in the European Union and other European countries with separate collection systems)

For the State of California, USA only

Perchlorate Material - special handling may apply, See

www.dtsc.ca.gov/hazardouswaste/perchlorate Perchlorate Material: Lithium battery contains perchlorate.

For Customers in Europe

This product has been tested and found compliant with the limits set out in the EMC Directive for using connection cables shorter than 3 meters (9.8 feet).

[ Attention

The electromagnetic fields at the specific frequencies may influence the picture and sound of this unit.

[ Notice

If static electricity or electromagnetism causes data transfer to discontinue midway (fail), restart the application or disconnect and connect the communication cable (USB, etc.) again.

[Notice for the customers in the countries applying EU Directives

The manufacturer of this product is Sony Corporation, 1-7-1 Konan Minato-ku Tokyo, 1080075 Japan. The Authorized Representative for EMC and product safety is Sony Deutschland GmbH, Hedelfinger Strasse 61, 70327 Stuttgart, Germany. For any service or guarantee matters please refer to the addresses given in separate service or guarantee documents.

This symbol on the product or on its packaging indicates that this product shall not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. The recycling of materials will help to conserve natural resources. For more detailed information about recycling of this product, please contact your local Civic Office, your household waste disposal service or the shop where you purchased the product.

Disposal of waste batteries (applicable in the European Union and other European countries with separate collection systems)

This symbol on the battery or on the packaging indicates that the battery provided with this product shall not be treated as household waste. By ensuring these batteries are disposed of correctly, you will help prevent potentially negative consequences for the environment and human health which could otherwise be caused by inappropriate waste handling of the battery. The recycling of the materials will help to conserve natural resources.

In case of products that for safety, performance or data integrity reasons require a permanent connection with an incorporated battery, this

battery should be replaced by qualified service staff only.

To ensure that the battery will be treated properly, hand over the product at end-of-life to the applicable collection point for the recycling of electrical and electronic equipment.

For all other batteries, please view the section on how to remove the battery from the product safely. Hand the battery over to the applicable collection point for the recycling of waste batteries.

For more detailed information about recycling of this product or battery, please contact your local Civic Office, your household waste disposal service or the shop where you purchased the product.

Notice for customers in the United Kingdom

A moulded plug complying with BS 1363 is fitted to this equipment for your safety and convenience.

Should the fuse in the plug supplied need to be replaced, a fuse of the same rating as the supplied one and approved by ASTA or BSI to BS 1362, (i.e., marked with an or mark) must be used.

If the plug supplied with this equipment has a detachable fuse cover, be sure to attach the fuse cover after you change the fuse. Never use the plug without the fuse cover. If you should lose the fuse cover, please contact your nearest Sony service station.

Table of contents
IMPORTANT SAFEGUARDS ....................................................................	2
Read this first ............................................................................................	4
Notes on using the camera ......................................................................	8
Getting started .................................................................................	9
Checking the accessories supplied .........................................................	9
1 Preparing the battery pack ..................................................................	11
2 Inserting the battery pack ...................................................................	12
3 Turning the camera on/setting the clock .............................................	14
Shooting images easily .................................................................	16
Image size/Self-timer/Shooting mode/Flash/Macro/Display ...................	17
Viewing/deleting images ...............................................................	19
Selecting how to play back images .......................................................	20
Using the SCRAPBOOK .........................................................................	22
Learning the various functions – HOME/Menu ...........................	23
Using the HOME screen .........................................................................	23
HOME items ............................................................................................	24
Using the menu items .............................................................................	25
Menu items ..............................................................................................	26
Enjoying your computer ...............................................................	28
Connecting the camera to your computer .............................................	28
Viewing “Cyber-shot Handbook” ............................................................	29
Enjoying the supplied software ..............................................................	29
Indicators on the screen ...............................................................	31
Battery life and memory capacity ................................................	34
Battery life and number of images that you can record/view .................	34
Number of still images and recording time of movies ............................	35
Troubleshooting ............................................................................	36
Battery pack and power .........................................................................	36
Shooting still images/movies ..................................................................	37
Viewing images ......................................................................................	37
Precautions ....................................................................................	38
Specifications ................................................................................	39

Notes on using the camera

[Internal memory and “Memory Stick Duo” back up

Do not turn off the camera, remove the battery pack, or remove the “Memory Stick Duo” while the access lamp is lit. Otherwise, the internal memory data or “Memory Stick Duo” may be damaged. Be sure to make a backup copy to protect your data.

[ Notes on recording/playback

•Before you start recording, make a trial recording to make sure that the camera is working correctly.

•The camera is neither dust-proof, nor splashproof, nor water-proof. Read “Precautions” (page 38) before operating the camera.

•Avoid exposing the camera to water. If water enters inside the camera, a malfunction may occur. In some cases, the camera cannot be repaired.

•Do not aim the camera at the sun or other bright light. It may cause the malfunction of your camera.

•Do not use the camera near a location that generates strong radio waves or emits radiation. Otherwise, the camera may not properly record or play back images.

•Using the camera in sandy or dusty locations may cause malfunctions.

•If moisture condensation occurs, remove it before using the camera (page 38).

•Do not shake or strike the camera. It may cause a malfunction and you may not be able to record images. Furthermore, the recording media may become unusable or image data may be damaged.

•Clean the flash surface before use. The heat of flash emission may cause dirt on the flash surface to become discolored or to stick to the flash surface, resulting in insufficient light emission.

[ Notes on the LCD screen

•The LCD screen is manufactured using extremely high-precision technology so over 99.99% of the pixels are operational for effective use. However, some tiny black and/or bright dots (white, red, blue or green) may appear on the LCD screen. These dots are a normal result of the manufacturing process, and do not affect the recording.

•If water droplets or other liquids splash on the LCD screen and make it wet, immediately wipe off the screen with a soft cloth. Leaving liquids on the LCD screen surface can harm the quality and cause a malfunction.

[ On image data compatibility

•This camera conforms with DCF (Design rule for Camera File system) universal standard established by JEITA (Japan Electronics and Information Technology Industries Association).

•Sony does not guarantee that the camera will play back images recorded or edited with other equipment, or that other equipment will play back images recorded with the camera.

[ Warning on copyright

Television programs, films, videotapes, and other materials may be copyrighted. Unauthorized recording of such materials may be contrary to the provisions of the copyright laws.

[No compensation for damaged content or recording failure

Sony cannot compensate for failure to record or loss or damage of recorded content due to a malfunction of the camera or recording media, etc.

Getting started

Checking the accessories supplied

• Battery charger BC-CSD (1)

•Power cord (mains lead) (1)

(not supplied in the USA and Canada)

•Rechargeable battery pack NP-BD1 (1)/ Battery case (1)

•Paint pen (1)

•Adaptor plate (1)

You can place the camera on the Cyber-shot Station (not supplied) using the adaptor plate.

•USB adaptor for Multi connector (1)/ USB adaptor cap (1)

•USB cable (long) (1)/USB cable (short) (1)

•Wrist strap (1)

•CD-ROM (1)

–Cyber-shot application software

–“Cyber-shot Handbook”

–“Cyber-shot Step-up Guide”

•Instruction Manual (this manual) (1)

About the paint pen

•You can paint or put stamps on still images with the paint pen.

•Attach the paint pen to the wrist strap (shown right).

•Do not carry the camera by holding the paint pen. The camera may fall off.

About the wrist strap
Attach the strap and place your hand	Hook
through the loop to prevent the camera from
damage by being dropped.

On attaching the USB adaptor for Multi connector/USB adaptor cap

•Depending on when or where you use the camera, attach the USB adaptor for Multi connector to either the long or the short cable.

•Attach the USB adaptor cap on the USB cable when carrying it in bags, etc.

•Be careful not to hang or give strong impact to the adaptor or the cable. It may become damaged.

USB adaptor cap

USB adaptor for Multi

connector

USB cable

1 Preparing the battery pack

For customers in the USA and Canada

For customers in countries/regions other than the USA and Canada

	Plug
	to the wall outlet
	to the wall
	outlet
	CHARGE lamp
CHARGE lamp	Power cord (mains lead)

1Insert the battery pack into the battery charger.

2Connect the battery charger to the wall outlet (wall socket).

The CHARGE lamp lights up, and charging starts.

When the CHARGE lamp turns off, charging is finished (Practical charge).

If you continue charging the battery pack for about one more hour (until it is fully charged), the charge will last slightly longer.

[ Charging time

Full charge time	Practical charge time
Approx. 220 min.	Approx. 160 min.

•The table above shows the time required to charge a fully depleted battery pack at a temperature of 25°C (77°F). Charging may take longer depending on conditions of use and circumstances.

•See page 34 for the number of images that can be recorded.

•Connect the battery charger to the nearest wall outlet (wall socket).

•Even if the CHARGE lamp is not lit, the battery charger is not disconnected from the AC power source (mains) as long as it is connected to the wall outlet (wall socket). If some trouble occurs while using the battery charger, immediately shut off the power by disconnecting the plug from the wall outlet (wall socket).

•When charging is finished, disconnect the power cord (mains lead) from the wall outlet (wall socket), and remove the battery pack from the battery charger.

•Designed for use with compatible Sony batteries.

Sony DSCT2W, DSCT2L, DSCT2B, DSCT2P User Manual

2 Inserting the battery pack

Battery/“Memory Stick Duo” cover

	Close
	Battery eject
Open	lever

Align the v mark of the battery slot with the v mark on the side of the battery pack. Press and hold the battery eject lever and insert the battery pack.

1Open the battery/“Memory Stick Duo” cover.

2Insert the battery pack.

3Close the battery/“Memory Stick Duo” cover.

[ To check the remaining battery charge

Press POWER button to turn on and check the remaining battery charge on the LCD screen.

Remaining
charge
indicator
Status	Sufficient	Battery	Battery half	Battery low,	Change the battery
	power	almost fully	full	recording/	with fully charged
	remaining	charged		playback	one, or charge the
				will stop	battery. (The warning
				soon.	indicator flashes.)

•If the NP-FD1 battery pack (not supplied) is used, the minute display ( 60 Min) is also shown after the battery remaining indicator.

•It takes about one minute until the correct remaining charge indicator appears.

•The remaining charge indicator may not be correct depending on conditions of use and circumstances.

•The Clock Set screen appears when you turn on the camera for the first time (page 14).

[ To remove the battery pack

Open the battery/“Memory Stick Duo” cover and remove the battery pack.

Slide the battery eject lever.

Be sure not to drop the battery pack.

•Never remove the battery pack when the access lamp is lit. This may cause damage to data in the “Memory Stick Duo”/internal memory.

•Use the NP-BD1 battery pack (supplied) only with this camera.

[ To insert a “Memory Stick Duo” (not supplied)

Open the battery/“Memory Stick Duo” cover to insert a “Memory Stick Duo”.

Insert the “Memory Stick Duo” with the terminal side facing the lens.

Access lamp

To remove the “Memory Stick Duo”, push the “Memory Stick Duo” in once.

•Never remove the “Memory Stick Duo” when the access lamp is lit. This may cause damage to data in the “Memory Stick Duo”/internal memory.

•Even if “Memory Stick Duo” is inserted in the camera, images will not be saved in “Memory Stick Duo” until the capacity of the internal memory is full. To save images in “Memory Stick Duo”, copy (export) the images in the internal memory to “Memory Stick Duo”.

3 Turning the camera on/setting the clock

POWER button

Lens

Lens cover

Touch panel

1Press the POWER button or slide the lens cover downward.

2Set the clock by touching the button on the touch panel.

1 Touch the desired date display format, then touch .

2 Touch each item, then set its numeric value by touching v/V. 3 Touch [OK].

On the touch panel buttons

Perform settings on this camera by lightly touching the buttons or icons on the screen with your finger.

• When the item you want to set is not on the screen, touch v/V to change the page.

• You can return to the previous screen by touching [BACK].

•Touching [?] displays the guide about the touched item. To hide this guide, touch [?] again.

•When the top right of the screen is touched while shooting, the icons will momentarily disappear. Taking your finger off the screen will make the icons reappear.

+ 30 hidden pages