Samsung CS-21A750, CS-29B850, CS-21Z58M5, CS-21B850F6, CS-21A750J6 Manual

COLOUR TELEVISION

CS21Z43/21Z45/21Z47/2 Z50/2 Z57

/21Z58/2 AE0/21AF0/2 AJ0

Owner’s Instructions

Before operating, please read this manual thoroughly, and retain it for future reference.

Register your product at

www.samsung.com/global/register

Control Panel (depending on the model)

The actual configuration of your TV may be different, depending on your model.

Front (or Side) Panel

1On-screen menu display

2Volume adjustment

3Channel selection

4Remote control sensor

5Standby indicator

6Power on/off

You can use the 3 buttons to switch the TV on when it is in standby mode depending on the model.

The 2 and 3 buttons also have the same function as the ◄/►/▲/▼ buttons on the remote control.

If the remote control no longer works or you have misplaced it, you can use the controls on the panel of the television.

Connection Panel (depending on the model)

The actual configuration of your TV may be different, depending on your model.

Rear Panel

or

cable television

network

or

cable television

network

Whenever you connect an audio or video system to your television, ensure that all elements are switched off.

Please be sure to match the color coded input terminals and cable jacks.

Connecting to an Aerial or Cable Television Network

Connect the aerial or network input cable to the 1 (75 Ω coaxial socket).

To view television channels correctly, a signal must be received by the set from one of the sources: an outdoor aerial, cable television network, or satellite network.

If you are using an indoor aerial, you may need to adjust it when tuning your television until you obtain a picture that is both sharp and clear.

Connecting to the RCA Output

The RCA2 connectors are used for equipment, such as a recording VCR or audio system.

continued...

English -

Connecting to the RCA Input

The RCA3 and RCA4 connectors are used for equipment, such as a VCR, DVD, decoder, satellite receiver, video game device, or video disc player. (When using the mono equipment, connect to the AUDIO-L input connector.)

The RCA5 connectors are used for equipment such as a

DVD with component output.

Front (or Side) Panel

Audio input

Video input

Headphone jack

Audio input

Video input

Please be sure to match the colour coded input terminals and cable jacks.

Connecting to the RCA Input

The 1 (AUDIO-L/R) and 2 (VIDEO) connectors are used for equipment, such as a camcorder, video disc player, or video game device.

Connecting Headphones

The 3 (headphone) jack is used for watching a television programme without disturbing the other people in the room. Prolonged use of headphones at a high volume may damage your hearing.

When both the front (or side) AV and rear connectors are connected to external equipment, the front (or side) AV receives priority.

AA68-03974A-02

Remote Control (depending on the model)

Operation of remote control may be affected by bright artificial light near to the TV.

1POWER

Used to switch the TV on and off.

2Numeric buttons

Used to select channels directly.

3-/--

Used to select a channel numbered ten or over. Press this button, then “--” symbol is displayed. Enter the two-digit channel number.

4

/

Used to increase or decrease the volume.

5MENU

Used to display the on-screen menu or return to the previous menu.

6▲/▼/◄/►

Used to control the cursor in the menu.

7S.MENU

Used to display the sound menu.

8TURBO

Used to select the turbo sound option.

9DUAL I-II

Used to select the sound mode.

0SOURCE

Used to display all of the available video sources.

!INFO

Used to view the channel information and setting status you selected.

@PRE-CH

Used to switch repeatedly between the last two channels displayed.

#P /

Used to display the next or previous stored channel.

Installing Batteries

$ EXIT

Used to exit from any display or return to normal viewing.

%MUTE

Used to switch the sound off temporarily. To turn the sound back on, press the MUTE, , or button.

^ENTER

While using the on-screen menus, press the ENTER button to activate (or change) a particular item.

&S.MODE

Used to select the sound effect.

*P.MODE

Used to select the picture effect.

( TV

Used to return to the TV mode when it is in external input mode.

) EZ.VIEW

Used to display Channel Grouping, Channel Minimizer, Channel Schedule, Music Mode, Half Mute menu.

Remove the cover. Install two AAA size

batteries, then replace the cover. When the remote control does not operate normally, check that the

“+” and “-” ends of the batteries are

inserted correctly or the batteries are drained.

Do not mix battery types, i.e. alkaline and manganese.

Switching the Television On and Off

The mains lead is attached to the rear of the television.

1Plug the mains lead into an appropriate socket.

The main voltage is indicated on the rear of the television and the frequency is 50 or 60Hz.

2Press the “I” button (On/Off) on the front (or side) of the television.

3Press the POWER button on the remote control to switch the television on. The programme that you were watching last is re-selected automatically. If you have not yet stored any channels, no clear picture appears. Refer to “Channel - Auto Store” on page 3 or “Channel - Manual Store” on page 4.

If the television is initially powered on, several basic customer settings proceed automatically. Refer to “Setup - Plug & Play” on page 3.

4To switch the television off, press the “I” button (On/Off) on the front (or side) of the television.

Placing the Television in Standby Mode

The television can be placed in standby mode, in order to reduce power consumption and wear of the cathode ray tube. Standby mode can be useful when you wish to interrupt viewing temporarily (during a meal, for example).

1Press the POWER button on the remote control while viewing.

The television is in standby mode.

2To switch the television back on, simply press it again.

Do not leave the television in standby mode for long periods of time (when you are away on holiday, for example). Turn the television off by pressing the “I” button (On/Off) on the front (or side) of the television. It is best to unplug the set from the mains and aerial.

English -

Viewing the Menus

1Press the MENU button.

The main menu is displayed on the screen. Its left side has five icons: Input, Picture, Sound, Channel, and Setup.

2Press the ▲ or ▼ button to select one of the icons.

Press the ENTER button to access the icon’s sub-menu.

3Press the ▲ or ▼ button to move to items in the menu.

Press the ENTER button to enter items in the menu.

4Press the ▲/▼/◄/► button to change the selected items. Press the MENU button to return to the previous menu.

5Press the EXIT button to exit from the menu.

Setup - Plug & Play

When the television is initially powered on, several basic customer settings proceed automatically and subsequently. The following settings are available.

1If the television is in standby mode, press the POWER button on the remote control. The Start Plug & Play is displayed. To start Plug

& Play, press the ENTER button. The Language menu is displayed.

Plug & Play

Start Plug & Play.

OK

Enter

Exit

The Language menu will automatically appear after several seconds, even if the

ENTER button is not pressed.

2 Select the appropriated
language by pressing the		Plug & Play
		Language
▲ or ▼ button. Press the
		English
ENTER button. The Check
		Indonesia
antenna input. is displayed.		Melayu

If any language is not
selected, the language	Enter	Skip
Move

menu will disappear about 30 seconds later.

continued...

3Make sure that the antenna is connected to the television (refer to page 1). Press the ENTER button. The Area menu is displayed.

4Press the ▲ or ▼ button to select your area. Press the ENTER button.

5To search the channels, press the ENTER button. To stop the search, press the ENTER button.

When the channel searching has finished, the Clock Set menu is displayed.

6Press the ◄ or ► button to move to the hour or minute. Set the hour or minute by pressing the ▲ or ▼ button.

7When you have finished, press the MENU button.

The Enjoy your watching. is displayed, and then the channel which has been stored will be activated.

Re-setting the Plug & Play

Method:

MENU ▲/▼ (Setup) ENTER ▲/▼ (Plug & Play)

ENTER

Plug & Play

Check antenna input.

OK

Enter

Skip

Plug & Play

Area

South Africa

Asia/W.Europe

CIS/E.Europe

America

China

Hong Kong/UK

Australia

NZL/Indonesia

Move

Enter

Skip

Plug & Play

Auto Store

Start

Enter

Skip

Plug & Play

Auto Store

P 1 C--

02MHz

7 %

Stop

Enter

Skip

Plug & Play

Clock Set

1 2 : 0 0

am

Move

Enter

Adjust

Skip

Enjoy your watching.

OK

TV

Setup

Plug & Play



Language

: English



Time



Child Lock



Blue Screen

: On



Melody

: On



Music Mode

: Off



Move

Enter

Return

Input

Source List

Source List

You can switch between viewing signal from connected equipment, such as a VCR, DVD, settop box, and the TV source (broadcast or cable).

TV		Source List
TV
AV1
AV2
Component
Move	Enter	Return

You can change the required external source simply by pressing the SOURCE button on the remote control. It might take a short period of time for pictures to be switched. To return to the TV mode, press the TV button on the remote control.

Channel - Auto Store

You can scan for the frequency ranges available to you (and availability depends on your country). Automatically allocated programme numbers may not correspond to actual or desired programme numbers. However you can sort numbers manually and clear any channels you do not wish to watch.

Channels are sorted and stored in the order which reflects their position in the frequency range

(with lowest first and highest last). The programme originally selected is then displayed.

To stop the search before it has finished, press the

ENTER button.

When finished, the Sort menu is displayed. To sort the stored channels into the desired numerical order, refer to “Channel - Sort”. To exit without sorting, press the EXIT button.

	TV								Auto Store
				Area	:	BelgieAsia/W.Europe
				Search		CIS/E.Europe
						China
						Hong Kong/UK
						Australia
						NZL/Indonesia
						South Africa
						America
			Move			Enter					Return
					Search
	P 1 C--									02MHz
											7 %
					Stop
				Enter					Return

English -