KS1A(03123A)ENG_UMG 12/29/03 6:51 PM Page 1
COLOUR
TELEVISION
CS14C8/14F3/14F10/14H4/14Y5
CS15K2/15K5/15K8/15K9/15M16
CS17A11/17N11
CS2038/2039/2073/2085
20F1/20F3/20F10/20H4/20S1/20V5
CS2139/2173/2185/21D8/21D9
21F3/21F5/21F10/21H4/21K2/21K3/21K5/21K9
21M16/21M20/21S4/21V5/21V10
Owner’s Instructions
Before operating the unit, please read this manual thoroughly,
and retain it for future reference.
REMOTE CONTROL
ON-SCREEN MENUS
ENJOY GAME (depending on the model)
TELETEXT FUNCTION (depending on the model)
KS1A(03123A)ENG_UMG 12/29/03 6:51 PM Page 2
ENG
Do not expose the television to extreme temperature conditions or to extreme humidity conditions.
Do not expose the television to direct sunlight and other sources of heat.
Do not expose the television to any liquids.
Never put objects of any kind into the television, and do not place a water-containing vessel on the television.
During a storm conditions (especially when there is lightning) unplug the television from the mains socket and aerial.
Do not step on or twist the power cord.
Do not overload wall outlets or extension cords as this can result in a risk of fire or electric shock.
Please use a soft and dry cloth (not containing volatile matter) when you clean the TV.
If the television is broken, do not try to repair it yourself. Contact qualified service personnel.
If the remote control is not used for a long period of time, remove the batteries and store it in a cool, dry place.
Do not drop the remote control.
This device is not for use in industrial environments.
|
|
|
|
|
|
|
The lightning flash and arrow head |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
CAUTION |
|
! |
|
within the triangle is a warning sign |
|
|
|
|
RISK OF ELECTRIC SHOCK |
|
|
|
alerting you of “dangerous voltage” |
|
|
|
|
|
|
|
inside the product. |
|
|
|
|
|
DO NOT OPEN |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The exclamation point within the |
! |
|
|
|
|
|
|
|
||
|
|
CAUTION: TO PREVENT ELECTRICAL |
SHOCK, DO |
|
||||
|
|
|
triangle is a warning sign alerting |
|||||
|
|
NOT REMOVE REAR COVER, NO USER |
SERVICEABLE |
|
||||
|
|
|
you of important instructions |
|||||
|
|
PARTS INSIDE. REFER SERVICING TO QUALIFIED |
|
|||||
|
|
|
accompanying the product. |
|||||
|
|
SERVICE PERSONNEL. |
|
|
||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
WARNING: TO PREVENT DAMAGE WHICH MAY |
The main voltage is indicated on the rear |
||||||
|
RESULT IN FIRE OR SHOCK HAZARD. DO NOT EXPOSE THIS |
|||||||
|
APPLIANCE TO RAIN OR MOISTURE. |
|
|
of the TV set and the frequency is 50 or |
||||
|
|
|
|
|
|
|
60Hz. |
|
2
KS1A(03123A)ENG_UMG 12/29/03 6:51 PM Page 3
ENG
|
Contents |
|
PREPARING YOUR TELEVISION |
|
|
■ |
Safety Instructions ......................................................................................... |
2 |
■ |
Caution .......................................................................................................... |
2 |
■ |
Front Panel Controls (depending on the model)............................................ |
4 |
■ |
Using the Buttons on the Front Panel............................................................ |
4 |
■ |
Connection Panels ........................................................................................ |
5 |
■ |
Infrared Remote Control (All Functions Except Teletext) .............................. |
6 |
■ |
Infrared Remote Control (Teletext Functions) ............................................... |
7 |
■ |
Inserting the Batteries in the Remote Control................................................ |
8 |
■ |
Connecting the Aerial or Cable Television Network ...................................... |
8 |
■ |
Switching Your Television On and Off........................................................... |
9 |
■ |
Placing Your Television in Standby mode ..................................................... |
9 |
■ |
Plug & Play Feature (depending on the model)............................................. |
10 |
■ |
Choosing Your Language.............................................................................. |
11 |
SETTING UP THE CHANNELS |
|
|
■ |
Storing the Channels Automatically............................................................... |
12 |
■ |
Selecting a Channel Numbered Ten or Over ................................................ |
12 |
■ |
Storing the Channels Manually...................................................................... |
13 |
■ |
Skipping Unwanted Channels ....................................................................... |
14 |
■ |
Fine tuning Channel Reception ..................................................................... |
15 |
■ |
Sorting the Stored Channels ......................................................................... |
16 |
USING THE TELEVISION |
|
|
■ |
Changing the Picture Standard ..................................................................... |
17 |
■ |
Selecting the Picture Format (depending on the model) ............................... |
17 |
■ |
Adjusting the Picture Settings ....................................................................... |
18 |
■ |
Changing the Sound Standard (depending on the model) ............................ |
19 |
■ |
Adjusting the Sound Settings (depending on the model) .............................. |
20 |
■ |
Adjusting the Volume (depending on the model)........................................... |
20 |
■ |
Extra Sound Settings (depending on the model)........................................... |
21 |
|
(Auto Volume/Melody/Pseudo Stereo/Turbo Sound) |
|
■ |
Selecting the Sound Mode (depending on the model) .................................. |
22 |
■ |
Switching the Sound Off Temporarily ............................................................ |
23 |
■ Setting the Sleep Timer ................................................................................. |
23 |
|
■ |
Setting and Displaying the Current Time (depending on the model)............. |
24 |
■ |
Switching the Television On and Off Automatically (depending on the model) ... |
25 |
■ Activating the Child Lock ............................................................................... |
26 |
|
■ |
Setting the Blue Screen Mode....................................................................... |
27 |
■ |
Enjoying Games (depending on the model) .................................................. |
28 |
USING THE TELETEXT FUNCTION (depending on the model)
■ |
Teletext Decoder |
........................................................................................... |
|
29 |
■ |
Displaying Teletext .....................................................................Information |
|
29 |
|
■ |
Selecting a Specific ................................................................Teletext Page |
|
30 |
|
■ |
Using FLOF to Select ..........................................................a Teletext Page |
|
31 |
|
■ |
Storing Teletext Pages .................................................................................. |
|
31 |
|
INFORMATION ON CONNECTIONS AND RECOMMENDATIONS FOR USE |
|
|||
■ |
Viewing Pictures ......................................................From External Sources |
32 |
||
■ |
Connecting to the ...............................................Audio/Video Input/Outputs |
33 |
||
■ |
Automatic Degaussing .........................................to Remove Color Patches |
34 |
||
■ |
Troubleshooting: ................................Before Contacting Service Personnel |
34 |
||
Symbols |
|
|
|
|
|
Press |
Important |
Note |
|
3
KS1A(03123A)ENG_UMG 12/29/03 6:51 PM Page 4
Buttons and markings are subject to change.
ENG
1 |
2 |
3 |
4 |
5 |
|
|
|
6
1 |
|
|
4 |
5 |
|
2 |
3 |
6 |
|||
|
|
||||
|
|
|
1 |
2 |
3 |
5 |
|
6 |
||
|
|
|
|
|
|
|
4 |
! |
MENU DISPLAY |
$ |
REMOTE CONTROL SENSOR |
@ |
VOLUME ADJUSTMENT |
% |
STAND-BY INDICATOR |
# |
CHANNEL SELECTION |
^ |
POWER |
If your remote control no longer works or you have lost it, you can use the controls on the front panel of the television to:
Switch on the television when it is in Standby mode and select channels ( CH )
Access the main menu ( MENU )
Adjust the volume ( - VOL + )
Buttons on the front panel have the same function as corresponding buttons on the remote control.
4
KS1A(03123A)ENG_UMG 12/29/03 6:51 PM Page 5
The actual configuration on your TV may be different, depending on |
ENG |
your model. |
|
Front (or Side) of TV
RCA AUDIO/VIDEO INPUT
CONNECTORS
Connecting earphones ( ) /headphones ( )
You can connect a set of earphones/headphones to your television if you wish to watch a television programme without disturbing the other people in the room.
Prolonged use of earphones/headphones at a high volume may damage your hearing.
Rear of TV
|
OUTPUT |
|
OUTPUT |
VIDEO |
AUDIO |
VIDEO |
AUDIO |
|
INPUT |
|
INPUT |
C |
B |
C |
C |
|
B |
VIDEO AUDIO |
|
(MONO) |
|
VIDEO L-AUDIO-R |
|
MONITOR |
|
MONITOR |
-OUT |
|
-OUT |
INPUT |
|
INPUT |
A)SCART AUDIO/VIDEO INPUT/OUTPUT CONNECTOR
B)75Ω COAXIAL CONNECTOR FOR AERIAL/CABLE NETWORK
C)RCA AUDIO/VIDEO INPUT/OUTPUT CONNECTORS
5
KS1A(03123A)ENG_UMG 12/29/03 6:52 PM Page 6
ENG |
Buttons and markings are subject to change. |
|
POWER
DIRECT CHANNEL SELECTION
ONE/TWO-DIGIT CHANNEL
SELECTION
VOLUME INCREASE
TEMPORARY SOUND SWITCH-
OFF
VOLUME DECREASE |
TUNER/CABLE NETWORK
SELECTION
MENU DISPLAY
MOVE TO THE REQUIRED
MENU OPTION/
ADJUST AN OPTION VALUE
RESPECTIVELY
SOUND MODE SELECTION (OPTION)
GAME DISPLAY (OPTION)
TURBO SOUND ON/OFF (OPTION)
SOUND MENU DISPLAY (OPTION)
SWITCH REPEATEDLY
BETWEEN THE LAST TWO
CHANNELS DISPLAYED
NEXT CHANNEL
EXTERNAL INPUT SELECTION
PREVIOUS CHANNEL
ON-SCREEN DISPLAY
EXIT FROM ANY DISPLAY
CHANGE CONFIRMATION/
PICTURE SIZE
AUTOMATIC SWITCH-OFF
PICTURE STANDARD
SOUND STANDARD (OPTION)
Operation of remote control may be affected by bright artificial light near to the TV set.
6
KS1A(03123A)ENG_UMG 12/29/03 6:52 PM Page 7
|
Buttons and markings are subject to change. |
|
ENG |
TELETEXT HOLD
TELETEXT NEXT PAGE
LIST/FLOF MODE SELECTION
TELETEXT PREVIOUS PAGE
TELETEXT REVEAL
PROGRAMME SELECTION BY
NAME
TELETEXT SUB-PAGE |
PICTURE SIZE |
TELETEXT DISPLAY/MIX TELETEXT STORE
FASTEXT TOPIC SELECTION
7
KS1A(03123A)ENG_UMG 12/29/03 6:52 PM Page 8
ENG
You must insert or replace the batteries in the remote control when you :
Purchase the television.
Find that the remote control is no longer operating correctly.
1Remove the cover of the remote control by pressing the symbol () and pulling the cover in the direction of the arrow.
2 Insert batteries, taking care to respect the polarities:
+ on the battery with + on the remote control- on the battery with - on the remote control
3 Replace the cover by pushing it in the direction of the arrow.
To view television channels correctly, a signal must be received by the set from one of the following sources:
An outdoor aerial
A cable television network
A satellite network
Plug the aerial or cable network input cable to the 75Ω coaxial socket on the rear of the television.
75Ω |
|
|
or |
|
Cable |
|
Television |
Rear of TV |
Network |
|
8
KS1A(03123A)ENG_UMG 12/29/03 6:52 PM Page 9
ENG
The mains lead is attached to the rear of the television.
1 Plug the mains lead into an appropriate socket.
The main voltage is indicated on the rear of the TV set and the frequency is 50 or 60Hz.
2Press the “ ” (ON/OFF) button on the front of the television. Result: The Standby indicator lights up on the front panel.
3Press the POWER () button on the remote control to switch the television on.
Result: The programme that you were watching last is reselected automatically.
4To switch your television off, press the “ ” (ON/OFF) button again on the front of the television.
Your television can be placed in Standby mode, in order to reduce:
Power consumption
Wear of the cathode ray tube
The Standby mode can be useful when you wish to interrupt viewing temporarily (during a meal, for example).
The television is placed automatically in Standby mode when you turn it on.
1Press the POWER () button on the remote control.
Result: The screen is turned off and the Standby indicator on the front of the television lights up.
2To switch the screen back on, simply press the POWER () button again on the remote control.
You can also switch on by pressing the P or button.
Do not leave your television in standby mode for long periods of time (when you are away on holiday, for example). In this case, you should switch it off completely.
9
KS1A(03123A)ENG_UMG 12/29/03 6:52 PM Page 10
ENG
Plug & Play
Language
Engllish
Indonesia
Malaysia
Adjust |
Select |
Ant. Input Check |
|
Auto Store |
Exit |
P 1 |
|
471 MHz |
48 % |
Exit
Time |
|
Clock |
- - : - - am |
Move |
Exit |
ENJOY YOUR WATCHING
|
|
Function |
Language : English |
||
Time |
√ |
|
Plug & Play |
√ |
|
Blue Screen |
: Off |
|
Child Lock |
√ |
|
|
|
|
When the television is initially powered on, three basic customer settings proceed automatically and subsequently: setting the language, channel and clock.
1If the television is in Standby mode, press the POWER () button on the remote control.
Result: The message Plug & Play is displayed. It flickers for a little while and then the Language menu is automatically displayed.
2Press the ▲ or ▼ button to select required language. Press the MENU () button to enter the language, and then the message
Ant. Input Check is displayed.
If any language is not selected on the Language menu, the Language menu will be displayed about 30 seconds later.
3Make sure that the antenna is connected to the TV. And then press the œ or √ button to store the channels (refer to Storing the Channels Automatically on page 12).
Result: The horizontal bar is displayed, and then channels are stored in an order which reflects their positions in the frequency range.
4When searching and storing is complete, the Time menu is displayed.
5Press the œ or √ button to move to the hour or minute. Set the hour or minute by pressing the ▲ or ▼ button (refer to Setting
and Displaying the Current Time on page 24).
6When you have finished, press the MENU () button.
Result: The message ENJOY YOUR WATCHING is displayed, and then the channel which has been stored will be activated.
7If you want to reset this feature...
1 Press the MENU () button.
2 Press the ▲ or ▼ button to select the Function, and then press the œ or √ button.
3Select the Plug & Play by pressing the ▲ or ▼ button, and then press the œ or √ button.
Result: The message Plug & Play is displayed.
Select |
Enter |
Exit |
10
KS1A(03123A)ENG_UMG 12/29/03 6:52 PM Page 11
When you start using your television for the first time, you must select the language which will be used for displaying menus and indications.
1Press the MENU () button.
2Press the ▲ or ▼ button to select the Function.
3Press the œ or √ button to select the Language.
4Select a particular language by pressing the œ or √ button repeatedly.
5When you have finished, press the EXIT () button or, press the MENU () button repeatedly to return to
normal viewing.
ENG
|
|
|
|
|
|
|
|
|
Picture |
|
|
|
Mode |
œ |
Custom |
√ |
|
|
Adjust |
|
√ |
|
|
|
Size |
|
: Normal |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Select |
Enter |
Exit |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Function |
|
|
|
Language : English |
|
|
||
|
Time |
|
√ |
|
|
|
Plug & Play |
√ |
|
|
|
|
Blue Screen |
: Off |
|
||
|
Child Lock |
√ |
|
|
|
|
|
|
|
|
|
Select |
Adjust |
Exit |
11