Samsung CS-29Z58HE, CS-29Z58HN, CS-29Z57HE, CS-29Z50HN Manual

COLORTELEVISION

CS29Z40/29Z45/29Z50

WS32Z40

Owner’s Instructions

Before operating, please read this manual thoroughly, and retain it for future reference.

Register your product at www.samsung.com/global/register. Record your Model and Serial number here for future reference. ▪ Model __________ ▪ Serial No. __________

Control Panel (depending on the model)

Themodel.product colour and shape may vary depending on the

Front (or Side) Panel

1 2

3

4

5

6

1 Remote control sensor

2 Standby indicator

3 Power on/off

4 On-screen menu display

5 Volume adjustment

6Channel selection

You can use the 6 buttons to switch the TV on when it is in standby mode depending on the model.

The 5 and 6 buttons also have the same function as the

◄/►/▲/▼ buttons on the remote control.

If the remote control no longer works or you have misplaced it, you can use the controls on the panel of the television.

Connection Panel (depending on the model)

Themodel.product colour and shape may vary depending on the

Rear Panel

5

1 2

2	3	1	or
		4

cable television network

Whenever you connect an audio or video system to your television, ensure that all elements are switched off.

Please be sure to match the colour coded input terminals and cable jacks.

Connecting to an Aerial or Cable Television Network

Connect the aerial or network input cable to the 1 (75 Ω coaxial socket).

To view television channels correctly, a signal must be received by the set from one of the sources: an outdoor aerial, cable television network, or satellite network.

If you are using an indoor aerial, you may need to adjust it when tuning your television until you obtain a picture that is both sharp and clear.

Connecting to the RCA Output

The RCA2 connectors are used for equipment, such as a recording VCR or audio system.

Connecting to the RCA Input

The RCA3 connectors are used for equipment, such as a VCR, DVD, decoder, satellite receiver, video game device, or video disc player. (When using the mono equipment, connect to the AUDIO-L input connector.)

The RCA4 connectors are used for equipment such as a DVD with component output.

English - 1

Connecting to the HDMI Input

The HDMI5 connector is used for equipment with HDMI output, such as a Set-Top Box, DVD player, AV receiver or digital TV.

No additional Audio connection is needed for an HDMI to HDMI connection.

Side Panel

1 S-Video input

2 Video input

3 Audio input

Connecting to the S-VIDEO Input

The 1 (S-VIDEO IN) and 3 (AUDIO-L/R) connectors are used for equipment with an S-Video output, such as a camcorder or VCR.

Connecting to the RCA Input

The 3 (AUDIO-L/R) and 2 (VIDEO) connectors are used for equipment, such as a camcorder, video disc player, or video game device.

AA68-03903A-01

Remote Control (depending on the model)

Operation of remote control may be affected by bright artificial light near to the TV.

This is a special remote control for the visually impaired, and has Braille points on the POWER, Channel and Volume buttons.

1 POWER	3 -/--
Used to switch the TV on	Used to select a channel
and off.	numbered ten or over.
2 Numeric buttons	Press this button, then
Used to select channels	“--” symbol is displayed.
directly.	Enter the two-digit
	channel number.

4CH MGR

Used to display channel lists on the screen.

5TV

Used to return to the TV mode when it is in external input mode.

6

/

Used to increase or decrease the volume.

7MENU

Used to display the on-screen menu or return to the previous menu.

8▲/▼/◄/►

Used to control the cursor in the menu.

9INFO

Used to view the channel information and setting status you selected.

0S.MODE

Used to select the sound effect.

!P.MODE

Used to select the picture effect.

@DUAL I-II

Used to select the sound mode.

#TURBO

Used to select the turbo sound option.

$SOURCE

Used to display all of the available video sources.

Installing Batteries

%PRE-CH

Used to switch repeatedly between the last two channels displayed.

^SLEEP

Used to select a preset time interval for automatic turn off.

&SRS

Used to select the SRS TruSurround XT mode.

*P / P

Used to display the next or previous stored channel.

(EXIT

Used to exit from any display or return to normal viewing.

) MUTE

Used to switch the sound off temporarily. To turn the sound back on, press the MUTE, , or button.

aENTER

While using the on-screen menus, press the ENTER button to activate (or change) a particular item.

bSTILL

Used to freeze the current picture.

cP.SIZE

Used to change the screen size.

Remove the cover. Install two AAA size batteries, then replace the cover.

When the remote control does not operate

normally, check that the “+” and “–” ends of the batteries are inserted correctly or the

batteries are drained.

Do not mix battery types, i.e. alkaline and manganese.

Switching the Television On and Off

The mains lead is attached to the rear of the television

1Plug the mains lead into an appropriate socket.

The main voltage is indicated on the rear of the television and the frequency is 50 or 60Hz.

2Press the “” button (On/Off) on the front of the television.

3 Press the POWER button on the remote control to switch the television on. The programme that you were watching last is re-selected automatically. If you have not yet stored any channels, no clear picture appears. Refer to “Channel -Auto Store” on page 3 or “Channel - Manual Store” on page 4.

If the television is initially powered on, several basic customer settings proceed automatically.

Refer to “Setup - Plug & Play” on page 3.

4To switch the television off, press the “” button (On/Off) on the front of the television.

Placing the Television in Standby Mode

The television can be placed in standby mode, in order to reduce power consumption and wear of the cathode ray tube. Standby mode can be useful when you wish to interrupt viewing temporarily (during a meal, for example).

1Press the POWER button on the remote control while viewing.

The television is in standby mode.

2To switch the television back on, simply press it again.

You can also switch on by pressing the TV (),

P / P , or numeric button.

Do not leave the television in standby mode for long periods of time (when you are away on holiday, for example). Turn the television off by pressing the “” button (On/Off) on the front (or side) of the television. It is best to unplug the set from the mains and aerial.

English - 2

Viewing the Menus

1Press the MENU button.

The main menu is displayed on the screen. Its left side has five icons: Input, Picture, Sound, Channel, and Setup.

2Press the ▲ or ▼ button to select one of the icons. Press the ENTER button to access the icon’s sub-menu.

3Press the ▲ or ▼ button to move to items in the menu. Press the ENTER button to enter items in the menu.

4Press the ▲/▼/◄/► button to change the selected items. Press the MENU button to return to the previous menu.

5Press the EXIT button to exit from the menu.

Setup - Plug & Play

When the television is initially powered on, several basic customer settings proceed automatically and subsequently. The following settings are available.

1 If the television is in standby		Plug & Play
mode, press the POWER	Start Plug & Play
button on the remote control.		OK
The message Start Plug &	Enter	Return
Play. is displayed.		Language
To start Plug & Play, press the		English
ENTER button.
The Language menu is		Français
displayed.		Türkçe
The Language menu will	Move	Enter	Skip
automatically appear after
several seconds, even if the ENTER button is not
pressed.
2 Select the appropriated		Plug & Play
language by pressing the	Check antenna input.
▲ or ▼ button. Press the		OK
ENTER button.	Enter	Skip
The Check antenna input. is
displayed.

If any language is not selected, the language menu will disappear about 30 seconds later.

continued...

3Make sure that the antenna is connected to the television

(refer to page 1).

Press the ENTER button. The Area menu is displayed.

4Press the ▲ or ▼ button to select your country.

Press the ENTER button.

5To search the channels, press the ENTER button.

To stop the search, press the ENTER button.

When the channel searching has finished, the Clock Set menu is displayed.

6Press the ◄ or ► button to move to the hour or minute. Set the hour or minute by pressing the ▲ or ▼ button.

7When you have finished, press the MENU button. The Enjoy your watching is displayed, and then the channel which has been stored will be activated.

Area

Asia/W.Europ

CIS/E.Europe

China

HONG KONG/UK

Australia

NZL/Indonesia

South Africa

America

	Move		Enter		Skip
	P 1 C --		Search		87 MHz
			Stop		10%
	Enter		Skip
	TV			Clock Set
		Hour	Minute		am/pm
--			--		am
	Move		Adjust		Skip

Plug & Play

Enjoy your watching.

OK

Re-setting the Plug & Play

Method:

MENU  ▲/▼ (Setup)  ENTER  ▲/▼ (Plug & Play)  ENTER

TV					Setup
	Plug & Play				►
	Language :		English
	Time		: On		►
	Blue Screen				►
	Melody		: On		►
		Enter			Return
Move

Input - (depending on the model)

Source List / Edit Name

Source List

You can switch between viewing signal from connected equipment, such as a VCR, DVD, set-top box, and the TV source (broadcast or cable).

TV	Source List

	TV		: ----
	AV1
	AV2		: ----
	AV3/S-Video		: ----
	Component1		: ----
	Component2		: ----
	HDMI	Enter	: ----
Move			Return

You can change the required external source simply by pressing the SOURCE button on the remote control. It might take a short period of time for pictures to be switched. To return to the TV mode, press the TV button on the remote control.

Edit Name

You can give a name to the external source.

TV	Edit Name

	AV1		----
			VCR
	AV2		DVD
			Cable STB
	AV3		HD STB
			Sat. STB
	S-Video		AV Receiver
	Component1		: ----
	Component2
	HDMI	Enter	: ----
Move			Return

Channel - Auto Store

You can scan for the frequency ranges available to you (and availability depends on your country). Automatically allocated programme numbers may not correspond to actual or desired programme numbers. However you can sort numbers manually and clear any channels you do not wish to watch.

Channels are sorted and stored
	TV			Auto Store
in the order which reflects their		Area	: Asia/W.Europe ►
position in the frequency range		Search			►
(with lowest first and highest last).
The programme originally selected
is then displayed.
To stop the search before it	Move		Enter		Return
has finished, press the ENTER			Search
button.	P 1 C --				87 MHz
When finished, the Sort menu			Stop		10%
is displayed. To sort the stored	Enter		Return

channels into the desired numerical order, refer to “Channel - Sort” on page 4.

To exit without sorting, press the EXIT button.

English - 3