CLX-9201/9251/9301 series CLX-9201ND/NA,
CLX-9251ND/NA, CLX-9301NA
(Ver 3.29)
SERVICEMANUAL
A3 Color Copier |
|
Contents |
1. Precautions
2. Product Specifications and Description
3. Disassembly and Reassembly
4. Troubleshooting
5. System Diagram
6. Reference Information
Refer to the service manual in the GSPN (see the rear cover) for more information.
Contents
Contents
1. Precautions ........................................................................................................................................ |
|
|
1 − 1 |
|
1.1. |
Safety warning .......................................................................................................................... |
|
1 − 1 |
|
1.2. |
Caution for safety ...................................................................................................................... |
|
1 − 2 |
|
|
1.2.1. |
Toxic material............................................................................................................... |
1 − 2 |
|
|
1.2.2. |
Electric shock and fire safety precautions ........................................................................... |
1 − 2 |
|
|
1.2.3. |
Handling precautions ..................................................................................................... |
1 − 4 |
|
|
1.2.4. |
Assembly and Disassembly precautions............................................................................. |
1 − 4 |
|
|
1.2.5. |
Disregarding this warning may cause bodily injury .............................................................. |
1 − 5 |
|
1.3. |
ESD precautions........................................................................................................................ |
|
1 − 6 |
|
2. Product Specifications and Description.................................................................................................... |
2 − 1 |
|||
2.1. |
Product Overview...................................................................................................................... |
|
2 − 1 |
|
2.2. |
Specifications............................................................................................................................ |
|
2 − 2 |
|
|
2.2.1. |
General Specification ..................................................................................................... |
2 − 2 |
|
|
2.2.2. |
Print Specifications........................................................................................................ |
2 − 3 |
|
|
2.2.3. |
Controller and Software specification ................................................................................ |
2 − 6 |
|
|
2.2.4. |
Scan specification........................................................................................................ |
2 − 10 |
|
|
2.2.5. |
Copy specification ....................................................................................................... |
2 − 12 |
|
|
2.2.6. |
Fax specification ......................................................................................................... |
2 − 14 |
|
|
2.2.7. |
Paper Handling specification.......................................................................................... |
2 − 18 |
|
|
2.2.8. |
Supplies..................................................................................................................... |
|
2 − 21 |
|
2.2.9. |
Maintenance Parts ....................................................................................................... |
2 − 21 |
|
|
2.2.10. |
Option....................................................................................................................... |
|
2 − 22 |
2.3. |
Machine External View............................................................................................................. |
2 − 24 |
||
2.4. |
Feeding System....................................................................................................................... |
|
2 − 28 |
|
|
2.4.1. |
Feeding System Overview............................................................................................. |
2 − 28 |
|
|
2.4.2. |
Main Components and functions .................................................................................... |
2 − 29 |
|
|
2.4.3. |
Cassette (Tray 1,2,3,4).................................................................................................. |
2 − 33 |
|
|
2.4.4. |
Pick-Up Unit .............................................................................................................. |
2 − 34 |
|
|
2.4.5. |
Registration Unit......................................................................................................... |
2 − 35 |
|
|
2.4.6. |
MPF(Multi-Purpose Feeder) Unit ................................................................................... |
2 − 36 |
|
2.5. |
Image Creation........................................................................................................................ |
|
2 − 37 |
|
|
2.5.1. |
Printing process overview ............................................................................................. |
2 − 37 |
|
|
2.5.2. |
Imaging Unit .............................................................................................................. |
2 − 38 |
|
|
|
2.5.2.1. |
Imaging Unit Overview.................................................................................. |
2 − 38 |
|
|
2.5.2.2. |
Drum drive .................................................................................................. |
2 − 39 |
|
|
2.5.2.3. |
Developer Unit ............................................................................................. |
2 − 40 |
|
2.5.3. |
ITB (Intermediate Transfer Belt) Unit.............................................................................. |
2 − 42 |
|
|
|
2.5.3.1. |
ITB Unit overview ........................................................................................ |
2 − 42 |
i |
Copyright© 1995-2016 SAMSUNG. All rights reserved. |
|
|
|
|
Contents |
|
|
2.5.3.2. |
Transfer belt drive ......................................................................................... |
2 − 43 |
|
|
2.5.3.3. |
Transfer belt cleaning..................................................................................... |
2 − 44 |
2.6. |
Fuser unit............................................................................................................................... |
|
2 − 45 |
|
|
2.6.1. |
Fuser unit overview ..................................................................................................... |
2 − 45 |
|
|
2.6.2. |
Fuser Unit drive .......................................................................................................... |
2 − 46 |
|
|
2.6.3. |
Fuser unit temperature control........................................................................................ |
2 − 47 |
|
2.7. |
Laser scanning unit (LSU)......................................................................................................... |
2 − 48 |
||
|
2.7.1. |
LSU overview............................................................................................................. |
2 − 48 |
|
|
2.7.2. |
Laser Scanning Optical path .......................................................................................... |
2 − 49 |
|
|
2.7.3. |
Laser synchronizing detectors ........................................................................................ |
2 − 50 |
|
|
2.7.4. |
Automatic line position adjustment ................................................................................. |
2 − 51 |
|
|
2.7.5. |
Shutter Mechanism...................................................................................................... |
2 − 54 |
|
2.8. |
Drive System .......................................................................................................................... |
|
2 − 55 |
|
|
2.8.1. |
Drive Motors.............................................................................................................. |
2 − 55 |
|
|
2.8.2. |
Main Drive Unit (OPC, DEVE, ITB, T1 DIS/ENG) ........................................................... |
2 − 57 |
|
|
2.8.3. |
Pick Up Drive............................................................................................................. |
2 − 58 |
|
|
2.8.4. |
Regi/ MP Drive........................................................................................................... |
2 − 59 |
|
|
2.8.5. |
Feed Drive ................................................................................................................. |
2 − 60 |
|
|
2.8.6. |
Fuser/Exit Drive.......................................................................................................... |
2 − 61 |
|
|
2.8.7. |
Waste Toner Container Drive......................................................................................... |
2 − 62 |
|
|
2.8.8. |
Toner Supply Drive...................................................................................................... |
2 − 62 |
|
2.9. |
Scanner System....................................................................................................................... |
|
2 − 63 |
|
|
2.9.1. |
Scanner System Overview............................................................................................. |
2 − 63 |
|
|
2.9.2. |
Scanning System Components ....................................................................................... |
2 − 63 |
|
2.10. |
Duplex Automatic Document Feeder(DADF)................................................................................ |
2 − 66 |
||
|
2.10.1. |
DADF overview.......................................................................................................... |
2 − 66 |
|
|
2.10.2. |
Electrical parts location ................................................................................................ |
2 − 67 |
|
|
2.10.3. |
DADF Drive System.................................................................................................... |
2 − 68 |
|
|
|
2.10.3.1. DADF Original Drive Assembly ...................................................................... |
2 − 69 |
|
|
|
2.10.3.2. DADF Registration (Regi) Drive Assembly........................................................ |
2 − 70 |
|
|
|
2.10.3.3. DADF Feed Drive Assembly........................................................................... |
2 − 70 |
|
|
|
2.10.3.4. DADF Exit Drive Assembly............................................................................ |
2 − 71 |
|
|
|
2.10.3.5. |
Original Return Drive .................................................................................... |
2 − 71 |
2.11. |
Hardware Configuration............................................................................................................ |
2 − 72 |
||
|
2.11.1. |
Main Controller .......................................................................................................... |
2 − 75 |
|
|
2.11.2. |
Operation Panel (OPE) controller ................................................................................... |
2 − 79 |
|
|
2.11.3. |
ADF PBA |
.................................................................................................................. |
2 − 82 |
|
2.11.4. |
SMPS (Switching Mode Power Supply) board .................................................................. |
2 − 83 |
|
|
2.11.5. |
Fuser Drive Board (FDB).............................................................................................. |
2 − 85 |
|
|
2.11.6. |
HVPS board ............................................................................................................... |
2 − 86 |
Copyright© 1995-2016 SAMSUNG. All rights reserved. |
ii |
Contents
|
2.11.7. |
Eraser PBA ................................................................................................................ |
2 − 89 |
|
2.11.8. |
Fuser PBA ................................................................................................................. |
2 − 89 |
|
2.11.9. |
Waste Sensor PBA ....................................................................................................... |
2 − 90 |
|
2.11.10. CRUM PBA............................................................................................................... |
2 − 90 |
|
|
2.11.11. Deve CRUM Joint PBA ............................................................................................... |
2 − 90 |
|
|
2.11.12. Toner CRUM Joint PBA .............................................................................................. |
2 − 91 |
|
|
2.11.13. ITB Encoder PBA ....................................................................................................... |
2 − 91 |
|
|
2.11.14. Scan Joint PBA........................................................................................................... |
2 − 92 |
|
|
2.11.15. Charge Coupled Device Module(CCDM) PBA.................................................................. |
2 − 93 |
|
|
2.11.16. White-LED(WLED) CTL PBA...................................................................................... |
2 − 94 |
|
|
2.11.17. White-LED(WLED) AL FRONT PBA ............................................................................ |
2 − 94 |
|
2.12. |
DCF Unit ............................................................................................................................... |
|
2 − 95 |
2.13. |
Finisher |
|
2 − 101 |
2.14. |
Wireless .............................................................................................................LAN Option |
2 − 104 |
|
3. Disassembly and ................................................................................................................Reassembly |
3 − 1 |
||
3.1. |
Precautions ..................................................................................................when replacing parts |
3 − 1 |
|
|
3.1.1. ................................................................. |
Precautions when assembling and disassembling |
3 − 1 |
|
3.1.2. ....................................................................................... |
Precautions when handling PBA |
3 − 1 |
|
3.1.3. ................................................................................................ |
Releasing Plastic Latches |
3 − 2 |
3.2. |
Maintenance ............................................................................................................................. |
|
3 − 3 |
|
3.2.1. ................................................................................... |
Machine Cleaning for maintenance |
3 − 3 |
|
............................................................... |
Cleaning the ACR/CTD sensor window |
3 − 3 |
|
................................................................................ |
Cleaning the LSU window |
3 − 4 |
|
................................................................................ |
Cleaning the transfer roller |
3 − 5 |
|
..................................................................................... |
Cleaning the scan glass |
3 − 5 |
|
3.2.2. ........................................................................................ |
Replacing the maintenance part |
3 − 6 |
|
..................................................................................................... |
Drum Unit |
3 − 6 |
|
............................................................................................... |
Developer Unit |
3 − 7 |
|
................................................................................................... |
ITB Cleaner |
3 − 9 |
|
........................................................................................................ |
ITB Unit |
3 − 9 |
|
.................................................................................................... |
Fuser unit |
3 − 11 |
|
............................................................................................... |
Transfer roller |
3 − 11 |
|
..................................................................... |
Pick-Up_Reverse_Forward roller |
3 − 12 |
|
................................................................. |
MP Pick up_Reverse_Forward roller |
3 − 13 |
|
.............................................................................. |
DADF Pick-up roller Assy |
3 − 14 |
|
........................................................................................ |
DADF friction pad |
3 − 14 |
3.3. |
Replacing .....................................................................................................the main SVC part |
3 − 15 |
|
|
3.3.1. .................................................................................................................. |
Left Cover |
3 − 15 |
|
3.3.2. ................................................................................................................. |
Rear Cover |
3 − 15 |
|
3.3.3. ............................................................................................................... |
HVPS board |
3 − 16 |
iii |
Copyright© 1995-2016 SAMSUNG. All rights reserved. |
|
|
|
Contents |
3.3.4. |
Temperature Sensor ..................................................................................................... |
3 − 16 |
|
3.3.5. |
LSU.......................................................................................................................... |
|
3 − 17 |
3.3.6. |
OPE Unit................................................................................................................... |
|
3 − 18 |
3.3.7. |
Main board................................................................................................................. |
3 − 21 |
|
3.3.8. |
SMPS Fan.................................................................................................................. |
3 − 22 |
|
3.3.9. |
SMPS board ............................................................................................................... |
3 − 23 |
|
3.3.10. |
FDB board ................................................................................................................. |
3 − 23 |
|
3.3.11. |
Fuser-Duct Fan ........................................................................................................... |
3 − 24 |
|
3.3.12. |
Main board shield........................................................................................................ |
3 − 24 |
|
3.3.13. |
Main Drive unit........................................................................................................... |
3 − 25 |
|
3.3.14. |
Fuser/Exit Drive unit.................................................................................................... |
3 − 25 |
|
3.3.15. |
Pick-up Drive unit ....................................................................................................... |
3 − 26 |
|
3.3.16. |
Feed Drive unit ........................................................................................................... |
3 − 26 |
|
3.3.17. |
Regi_MP Drive unit..................................................................................................... |
3 − 27 |
|
3.3.18. |
Toner Supply Drive unit................................................................................................ |
3 − 27 |
|
3.3.19. |
Waste toner container Drive unit..................................................................................... |
3 − 28 |
|
3.3.20. |
Auto Size sensor ......................................................................................................... |
3 − 28 |
|
3.3.21. |
Exit Unit.................................................................................................................... |
|
3 − 29 |
3.3.22. |
Side Unit ................................................................................................................... |
|
3 − 30 |
|
3.3.22.1. |
Fuser out sensor............................................................................................ |
3 − 31 |
|
3.3.22.2. Duplex sensor and Curl sensor......................................................................... |
3 − 32 |
|
|
3.3.22.3. |
MP unit....................................................................................................... |
3 − 33 |
3.3.23. |
Fuser unit................................................................................................................... |
|
3 − 37 |
3.3.24. |
Pick-up Unit and sensor................................................................................................ |
3 − 40 |
|
3.3.25. |
Feed sensor ................................................................................................................ |
3 − 40 |
|
3.3.26. |
Feed Unit................................................................................................................... |
|
3 − 41 |
3.3.27. |
Registration Unit......................................................................................................... |
3 − 42 |
|
3.3.28. |
DADF Unit ................................................................................................................ |
3 − 43 |
|
|
3.3.28.1. |
DADF Cover................................................................................................ |
3 − 44 |
|
3.3.28.2. |
DADF Open Cover........................................................................................ |
3 − 46 |
|
3.3.28.3. |
DADF Stacker.............................................................................................. |
3 − 46 |
|
3.3.28.4. |
DADF main board......................................................................................... |
3 − 46 |
|
3.3.28.5. |
DADF motor_solenoid_clutch ......................................................................... |
3 − 47 |
|
3.3.28.6. |
DADF Regi_Cover_Detect sensor .................................................................... |
3 − 49 |
|
3.3.28.7. DADF Exit Idle sensor................................................................................... |
3 − 49 |
|
|
3.3.28.8. |
DADF Exit sensor......................................................................................... |
3 − 50 |
|
3.3.28.9. |
DADF Length_Width sensor ........................................................................... |
3 − 50 |
3.3.29. |
Scanner Unit............................................................................................................... |
3 − 51 |
|
|
3.3.29.1. |
Scanner joint board........................................................................................ |
3 − 51 |
|
3.3.29.2. |
Scan glass.................................................................................................... |
3 − 52 |
Copyright© 1995-2016 SAMSUNG. All rights reserved. |
iv |
Contents
|
|
3.3.29.3. |
APS sensor .................................................................................................. |
3 − 53 |
|
|
3.3.29.4. |
FR module................................................................................................... |
3 − 54 |
|
|
3.3.29.5. |
Scanner Assy................................................................................................ |
3 − 55 |
|
3.3.30. |
Side Cover Open Switch............................................................................................... |
3 − 56 |
|
|
3.3.31. |
Front Cover Open Switch.............................................................................................. |
3 − 56 |
|
|
3.3.32. |
Replacing the HDD...................................................................................................... |
3 − 57 |
|
|
3.3.33. |
DCF (Double Cassette Feeder)....................................................................................... |
3 − 58 |
|
|
|
3.3.33.1. |
DCF main board ........................................................................................... |
3 − 58 |
|
|
3.3.33.2. |
DCF Feed Motor........................................................................................... |
3 − 59 |
|
|
3.3.33.3. |
DCF Pick Up Motor....................................................................................... |
3 − 59 |
|
3.3.34. |
Finisher ..................................................................................................................... |
|
3 − 60 |
|
|
3.3.34.1. |
Finisher Main Motor...................................................................................... |
3 − 60 |
|
|
3.3.34.2. |
Finisher Board.............................................................................................. |
3 − 63 |
4. Troubleshooting.................................................................................................................................. |
|
4 − 1 |
||
4.1. |
Control panel ............................................................................................................................ |
|
4 − 1 |
|
|
4.1.1. |
Introducing the display screen and useful buttons ................................................................ |
4 − 2 |
|
4.2. Understanding the status LED ...................................................................................................... |
4 − 4 |
|||
4.3. |
Updating Firmware |
.................................................................................................................... |
4 − 5 |
|
|
4.3.1. |
Updating from the Printer Control Panel ............................................................................ |
4 − 5 |
|
|
4.3.2. |
Updating from the Network ............................................................................................ |
4 − 7 |
|
4.4. Service Mode (Tech Mode)........................................................................................................ |
4 − 10 |
|||
|
4.4.1. |
Entering/Exiting Service Mode ...................................................................................... |
4 − 10 |
|
|
4.4.2. |
Service Mode Menu Tree ............................................................................................. |
4 − 11 |
|
|
4.4.3. |
Information ................................................................................................................ |
4 − 15 |
|
|
|
4.4.3.1. |
General ....................................................................................................... |
4 − 15 |
|
|
4.4.3.2. |
Supply Status ............................................................................................... |
4 − 15 |
|
|
4.4.3.3. |
Software Version........................................................................................... |
4 − 16 |
|
|
4.4.3.4. |
Service Hours............................................................................................... |
4 − 16 |
|
|
4.4.3.5. |
Fault Log..................................................................................................... |
4 − 16 |
|
|
4.4.3.6. |
Print Reports ................................................................................................ |
4 − 17 |
|
|
4.4.3.7. |
Export Reports.............................................................................................. |
4 − 18 |
|
4.4.4. |
Maintenance Counts..................................................................................................... |
4 − 19 |
|
|
|
4.4.4.1. |
Fault Count ................................................................................................. |
4 − 19 |
|
|
4.4.4.2. |
Jam Count ................................................................................................... |
4 − 19 |
|
|
4.4.4.3. |
Part Replacement Count ................................................................................. |
4 − 20 |
|
|
4.4.4.4. |
Finisher Handling Count................................................................................. |
4 − 21 |
|
4.4.5. |
Diagnostics ................................................................................................................ |
4 − 22 |
|
|
|
4.4.5.1. |
Engine Diagnostics........................................................................................ |
4 − 22 |
|
|
4.4.5.2. |
Fax Diagnostics ............................................................................................ |
4 − 28 |
|
|
4.4.5.3. |
Scanner Diagnostics....................................................................................... |
4 − 30 |
v |
Copyright© 1995-2016 SAMSUNG. All rights reserved. |
|
|
|
Contents |
|
4.4.5.4. |
Adjustment .................................................................................................. |
4 − 32 |
|
4.4.5.5. ACS (Auto Color Sensing) ............................................................................. |
4 − 38 |
|
|
4.4.5.6. |
Image Management ...................................................................................... |
4 − 39 |
4.4.6. |
Service Functions ........................................................................................................ |
4 − 44 |
|
|
4.4.6.1. |
Main Memory Clear ...................................................................................... |
4 − 44 |
|
4.4.6.2. |
Hard Disk Maintenance.................................................................................. |
4 − 44 |
|
4.4.6.3. Count Setting of Large Page ........................................................................... |
4 − 44 |
|
|
4.4.6.4. |
Toner Save .................................................................................................. |
4 − 44 |
|
4.4.6.5. |
Port ............................................................................................................ |
4 − 45 |
|
4.4.6.6. |
Debug Log................................................................................................... |
4 − 45 |
|
4.4.6.7. |
Capture Log ................................................................................................. |
4 − 45 |
|
4.4.6.8. |
System Recovery .......................................................................................... |
4 − 47 |
|
4.4.6.9. |
TR Control Mode ......................................................................................... |
4 − 50 |
|
4.4.6.10. |
User Data Management ................................................................................. |
4 − 51 |
4.4.7. |
SFE (Special Feature Enablement).................................................................................. |
4 − 52 |
|
4.5. Error Code and Troubleshooting ................................................................................................. |
4 − 53 |
||
4.5.1. |
Ax-xxxx type error code ............................................................................................... |
4 − 63 |
|
4.5.2. |
Cx-xxxx type error code ............................................................................................... |
4 − 89 |
|
4.5.3. |
H1-xxxx type (DCF) error code.................................................................................... |
4 − 119 |
|
4.5.4. |
H2-xxxx (Finisher) type error code ............................................................................... |
4 − 131 |
|
4.5.5. |
Mx-xxxx type error code............................................................................................. |
4 − 144 |
|
4.5.6. |
Sx-xxxx type error code.............................................................................................. |
4 − 164 |
|
4.5.7. |
U1-xxxx type (Fuser) error code................................................................................... |
4 − 184 |
|
4.5.8. |
U2-xxxx type (LSU) error code.................................................................................... |
4 − 196 |
|
4.5.9. |
U3-xxxx type error code ............................................................................................. |
4 − 199 |
|
4.6. Image quality problems and solutions ........................................................................................ |
4 − 204 |
||
4.6.1. |
Vertical Black Band ................................................................................................... |
4 − 207 |
|
4.6.2. |
Vertical White Band, Light Band .................................................................................. |
4 − 208 |
|
4.6.3. |
Horizontal periodic Black Band or Dot .......................................................................... |
4 − 210 |
|
4.6.4. |
Horizontal periodic Light/Dark Band or Dot ................................................................... |
4 − 211 |
|
4.6.5. |
Foggy Image ............................................................................................................ |
4 − 212 |
|
4.6.6. |
Light Image.............................................................................................................. |
4 − 213 |
|
4.6.7. |
Blurred Image........................................................................................................... |
4 − 214 |
|
4.6.8. |
Incorrect color registration ......................................................................................... |
4 − 215 |
|
4.6.9. |
Uneven pitch and jitter image ...................................................................................... |
4 − 216 |
|
4.6.10. |
Skewed image........................................................................................................... |
4 − 217 |
|
4.6.11. |
Blank copy............................................................................................................... |
4 − 218 |
|
4.6.12. |
Poor fusing performance............................................................................................. |
4 − 219 |
|
4.6.13. |
Stain on the paper back side......................................................................................... |
4 − 220 |
|
4.7. Adjusting the LSU skew error .................................................................................................. |
4 − 221 |
Copyright© 1995-2016 SAMSUNG. All rights reserved. |
vi |
Contents
|
4.8. Adjusting the DADF skew....................................................................................................... |
4 − 223 |
|
|
4.9. |
Troubleshooting Guide ........................................................................................................... |
4 − 224 |
5. |
System Diagram.................................................................................................................................. |
5 − 1 |
|
6. |
Reference Information.......................................................................................................................... |
6 − 1 |
|
|
6.1. |
Tools for Troubleshooting............................................................................................................ |
6 − 1 |
|
6.2. |
Glossary................................................................................................................................... |
6 − 3 |
|
6.3. Polaris Training Frequently Asked Questions .................................................................................. |
6 − 9 |
|
|
6.4. |
Document Revision List............................................................................................................ |
6 − 20 |
vii |
Copyright© 1995-2016 SAMSUNG. All rights reserved. |
1. Precautions
In order to prevent accidents and damages to the equipment please read the precautions listed below carefully before servicing the product and follow them closely.
1)Only to be serviced by a factory trained service technician.
High voltages and lasers inside this product are dangerous. This product should only be serviced by a factory trained service technician.
2)Use only Samsung replacement parts.
There are no user serviceable parts inside the product. Do not make any unauthorized changes or additions to the product as these could cause the product to malfunctions and create an electric shocks or fire hazards.
3)Laser Safety Statement
The printer is certified in the U.S. to conform to the requirements of DHHS 21 CFR, chapter 1 Subchapter J for Class I(1) laser products, and elsewhere is certified as a Class I laser product conforming to the requirements of IEC 60825-1. Class I laser products are not considered to be hazardous. The laser system and printer are designed so there is never any human access to laser radiation above a Class I level during normal operation, user maintenance or prescribed service condition.
•Wavelength: 800 nm
•Beam divergence
-Paraller: 11 degrees
-Perpendicular: 35 degrees
•Maximum power of energy output: 12 mW
WARNING
Never operate or service the product with the protective cover removed from Laser/Scanner assembly. The reflected beam, although invisible, can damage your eyes.
When using this product, these basic safety precautions should always be followed to reduce risk of fire, electric shock, and personal injury.
4) Lithium battery not replaceable by user
Copyright© 1995-2016 SAMSUNG. All rights reserved. |
1-1 |
1. Precautions
This product contains toxic materials that could cause illness if ingested.
1)Please keep imaging unit and toner cartridge away from children. The toner powder contained in the imaging unit and toner cartridge may be harmful, and if swallowed, you should contact a doctor.
Failure to follow the following instructions could cause electric shock or potentially cause a fire.
1)Use only the correct voltage, failure to do so could damage the product and potentially cause a fire or electric shock.
2)Use only the power cable supplied with the product. Use of an incorrectly specified cable could cause the cable to overheat and potentially cause a fire.
3)Do not overload the power socket, this could lead to overheating of the cables inside the wall and could lead to a fire.
4)Do not allow water or other liquids to spill into the product, this can cause electric shock. Do not allow paper clips, pins or other foreign objects to fall into the product, these could cause a short circuit leading to an electric shock or fire hazard.
5)Never touch the plugs on either end of the power cable with wet hands, this can cause electric shock. When servicing the product, remove the power plug from the wall socket.
6)Use caution when inserting or removing the power cord. When removing the power cord, grip it firmly and pull. The power cord must be inserted completely, otherwise a poor contact could cause overheating leading to a fire.
7)Take care of the power cable. Do not allow it to become twisted, bent sharply around corners or power cable may be damaged. Do not place objects on top of the power cable. If the power cable is damaged it could overheat and cause a fire. Exposed cables could cause an electric shock. Replace the damaged power cable immediately, do not reuse or repair the damaged cable. Some chemicals can attack the coating on the power cable, weakening the cover or exposing cables causing fire and shock risks.
1-2 |
Copyright© 1995-2016 SAMSUNG. All rights reserved. |
1. Precautions
8)Ensure that the power sockets and plugs are not cracked or broken in any way. Any such defects should be repaired immediately. Take care not to cut or damage the power cable or plugs when moving the machine.
9)Use caution during thunder or lightning storms. Samsung recommends that this machine be disconnected from the power source when such weather conditions are expected. Do not touch the machine or the power cord if it is still connected to the wall socket in these weather conditions.
10)Avoid damp or dusty areas, install the product in a clean well ventilated location. Do not position the machine near a humidifier or in front of an air conditioner. Moisture and dust built up inside the machine can lead to overheating and cause a fire or cause parts to rust.
11)Do not position the product in direct sunlight. This will cause the temperature inside the product to rise possibly leading to the product failing to work properly and in extreme conditions could lead to a fire.
12)Do not insert any metal objects into the machine through the ventilator fan or other part of the casing, it could make contact with a high voltage conductor inside the machine and cause an electric shock.
13) |
When replacing the SMPS board, please wait 5 minutes after unplugging the power cord, then replace it. You |
can get a shock by the electric discharge.
Copyright© 1995-2016 SAMSUNG. All rights reserved. |
1-3 |
1. Precautions
The following instructions are for your own personal safety to avoid injury and so as not to damage the product.
1)Ensure the product is installed on a level surface, capable of supporting its weight. Failure to do so could cause the product to tip or fall.
2)The product contains many rollers, gears and fans. Take great care to ensure that you do not catch your fingers, hair or clothing in any of these rotating devices.
3)Do not place any small metal objects, containers of water, chemicals or other liquids close to the product which if spilled could get into the machine and cause damage or a shock or fire hazard.
4)Do not install the machine in areas with high dust or moisture levels, beside on open window or close to a humidifier or heater. Damage could be caused to the product in such areas.
5)Do not place candles, burning cigarettes, etc on the product, These could cause a fire.
6)Ensure that the machine is installed and used in proper area to meet the temperature and humidity specifications.
•If the machine is stored at below zero Celsius for a long time, do not use the machine instantly after movement. It can malfunction. Take care of the machine storage. If the machine is stored at below zero Celsius for a long time, keep the machine at room temperature and install it.
1)Replace parts carefully and always use Samsung parts. Take care to note the exact location of parts and also cable routing before dismantling any part of the machine. Ensure all parts and cables are replaced correctly. Please carry out the following procedures before dismantling the product or replacing any parts.
2)Ensure that power is disconnected before servicing or replacing any electrical parts.
3)Disconnect interface cables and power cables.
4)Only use approved spare parts. Ensure that part number, product name, any voltage, current or temperature rating are correct.
5)When removing or re-fitting any parts do not use excessive force, especially when fitting screws into plastic.
6)Take care not to drop any small parts into the machine.
7)Handling of the OPC Drum
•The OPC Drum can be irreparably damaged if it exposed to light. Take care not to expose the OPC Drum either to direct sunlight or to fluorescent or incandescent room lighting. Exposure for as little as 5 minutes can damage the surface of the photoconductive properties and will result in print quality degradation. Take extra care when servicing the product. Remove the OPC Drum and store it in a black bag or other lightproof container. Take care when working with the Covers (especially the top cover) open as light is admitted to the OPC area and can damage the OPC Drum.
•Take care not to scratch the green surface of OPC Drum Unit. If the green surface of the Drum Cartridge is scratched or touched the print quality will be compromised.
1-4 |
Copyright© 1995-2016 SAMSUNG. All rights reserved. |
1. Precautions
1)Be careful with the high temperature part.
The fuser unit works at a high temperature. Use caution when working on the printer. Wait for the fuser unit to cool down before disassembly.
2)Do not put fingers or hair into the rotating parts.
When operating a printer, do not put hand or hair into the rotating parts (Paper feeding entrance, motor, fan, etc.). If do, you can get harm.
3)When you move the printer, use safe lifting and handling techniques.
This printer is heavy. Use the lifting handles located on each side of the machine. Back injury could be caused if you do not lift carefully.
4)Ensure the printer is installed safely.
Ensure the printer is installed on a level surface, capable of supporting its weight. Failure to do so could cause the printer to tip or fall possibly causing personal injury or damaging the printer.
5)Do not install the printer on a sloping or unstable surface. After installation, double check that the printer is stable.
Copyright© 1995-2016 SAMSUNG. All rights reserved. |
1-5 |
1. Precautions
Certain semiconductor devices can be easily damaged by static electricity. Such components are commonly called “Electrostatically Sensitive (ES) Devices” or ESDs. Examples of typical ESDs are: integrated circuits, some field effect transistors, and semiconductor “chip” components. The techniques outlined below should be followed to help reduce the incidence of component damage caused by static electricity.
CAUTION
Be sure no power is applied to the chassis or circuit, and observe all other safety precautions.
1)Immediately before handling a semiconductor component or semiconductor-equipped assembly, drain off any electrostatic charge on your body by touching a known earth ground. Alternatively, employ a commercially available wrist strap device, which should be removed for your personal safety reasons prior to applying power to the unit under test.
2)After removing an electrical assembly equipped with ESDs, place the assembly on a conductive surface, such as aluminum or copper foil, or conductive foam, to prevent electrostatic charge buildup in the vicinity of the assembly.
3)Use only a grounded tip soldering iron to solder or desolder ESDs.
4)Use only an “anti-static” solder removal device. Some solder removal devices not classified as “anti-static” can generate electrical charges sufficient to damage ESDs.
5)Do not use Freon-propelled chemicals. When sprayed, these can generate electrical charges sufficient to damage ESDs.
6)Do not remove a replacement ESD from its protective packaging until immediately before installing it. Most replacement ESDs are packaged with all leads shorted together by conductive foam, aluminum foil, or a comparable conductive material.
7)Immediately before removing the protective shorting material from the leads of a replacement ESD, touch the protective material to the chassis or circuit assembly into which the device will be installed.
8)Maintain continuous electrical contact between the ESD and the assembly into which it will be installed, until completely plugged or soldered into the circuit.
9)Minimize bodily motions when handling unpackaged replacement ESDs. Normal motions, such as the brushing together of clothing fabric and lifting one’s foot from a carpeted floor, can generate static electricity sufficient to damage an ESD.
1-6 |
Copyright© 1995-2016 SAMSUNG. All rights reserved. |
2. Product Specifications and Description
•Printing Speed (Mono/Color)
•CLX-9301 series
-Up to 30 ppm in A4 (30 ppm in Letter)
-Up to 15 ppm in A3 (15 ppm in 11x17)
•CLX-9251 series
-Up to 25ppm in A4 (25 ppm in Letter)
-Up to 13 ppm in A3 (13 ppm in 11x17)
•CLX-9201 series
-Up to 20 ppm in A4 (20 ppm in Letter)
-Up to 10 ppm in A3 (10 ppm in 11x17)
•Processor
•Dual Core 1GHz
•Memory
•1GB DDR3 SDRAM
Copyright© 1995-2016 SAMSUNG. All rights reserved. |
2-1 |
2. Product Specifications and Description
Product Specifications are subject to change without notice.
Item |
|
Specfication |
|
Configuration |
|
• ND model : Platen cover model. |
|
|
• NA model : DADF model. |
||
|
|
||
|
|
|
|
Temperature |
Operating |
10 to 32 °C (50 to 90 °F) |
|
|
|
||
Storage |
-20 to 40 °C (-4 to 104 °F) |
||
|
|||
|
|
|
|
Humidity |
Operating |
20 to 80% RH |
|
|
|
||
Storage |
10 to 90% RH |
||
|
|||
|
|
|
|
|
Printing Simplex / |
• CLX-9301 series : 50 /52 dB |
|
|
• CLX-9251 series : 49 /51 dB |
||
|
Duplex |
||
|
• CLX-9201 series : 48/ 50 dB |
||
|
|
||
Acoustic Noise |
|
|
|
|
• CLX-9301 series : 53 /55 dB |
||
Level (Sound |
Copying Simplex / |
||
• CLX-9251 series : 53 /55 dB |
|||
Power / Pressure) |
Duplex |
||
• CLX-9201 series : 53/ 55 dB |
|||
|
|
||
|
|
|
|
|
Standby (Fuser off) |
30 dB |
|
|
|
|
|
|
Sleep |
27 dB |
|
|
|
|
|
|
|
Europe : AC 220-240V(-10%~6%) / 4A |
|
|
|
|
|
Power Supply |
Input Voltage |
USA : AC 110~127V (-10%~6%) / 10A |
|
|
|
||
|
Korea : AC 220-240V(-10%~6%) / 4A |
||
|
|
||
|
|
|
|
|
Rated Frequency |
50 / 60 Hz |
|
|
|
|
|
|
Ready |
100 Watt |
|
|
|
|
|
Power |
AVG. (Normal |
800 Watt |
|
Operation) |
|||
Consumption |
|
||
|
|
||
Max/Peak |
< 1500 Watt max |
||
|
|||
|
|
|
|
|
Sleep/Power Off |
3 Watt / 0 Watt |
|
|
|
|
|
|
|
• 560 x 600 x 787.3 mm (22 x 23.6 x 31 inches) (includes Platen Cover) |
|
Dimension (W x D |
|
• 560 x 600 x 844.3 mm (22 x 23.6 x 33.2 inches) (includes DADF) |
|
Set (mm) |
• 560 x 600 x 1046.6 mm (22 x 23.6 x 41.2 inches) (includes Platen Cover, |
||
x H) |
|
Stand) |
|
|
|
||
|
|
• 560 x 600 x 1106.3 mm (22 x 23.6 x 43.6 inches) (includes DADF, DCF) |
|
|
|
|
|
|
|
• Basic machine (includes developer unit) : 67.6 Kg (149 lb) |
|
|
|
• Platen Cover : 2.4 Kg (5.3 lb) |
|
|
|
• DADF : 4.9 Kg (10.8 lb) |
|
Weight |
Set (Kg) |
• DCF : 19.5 Kg (43 lb) |
|
• Stand : 12 Kg (26.5 lb) |
|||
|
|
||
|
|
• Job Separator : 1.5 Kg (3.3 lb) |
|
|
|
• Inner Finisher : 8.5 Kg (18.7 lb) |
|
|
|
• Drum Unit and Toner Cartridges : 6.5 Kg (14.3 lb) |
|
|
|
|
2-2 |
Copyright© 1995-2016 SAMSUNG. All rights reserved. |
|
|
|
2. Product Specifications and Description |
|
|
|
|
Item |
|
Specfication |
|
Reliability & |
Recommended |
• |
CLX-9301 series : 7,500 sheets/month |
Service |
Printing Volume |
• |
CLX-9251 series : 5,000 sheets/month |
|
(AMPV) |
• |
CLX-9201 series : 3,500 sheets/month |
|
|
||
|
|
|
|
|
Max. Monthly |
100,000 sheets/month |
|
|
Print Volume |
|
|
|
|
|
|
Item |
Specification |
|
|
•CLX-9301 series
•B&W : Up to 30 ppm in A4 (30 ppm in Letter)
•Color : Up to 30 ppm in A4 (30 ppm in Letter)
•B&W : Up to 15 ppm in A3 (15 ppm in 11X17)
•Color : Up to 15 ppm in A3 (15 ppm in 11X17)
•CLX-9251 series
•B&W : Up to 25 ppm in A4 (25 ppm in Letter)
Engine Speed |
Simplex |
• Color : Up to 25 ppm in A4 (25 ppm in Letter) |
•B&W : Up to 13 ppm in A3 (13 ppm in 11X17)
•Color : Up to 13 ppm in A3 (13 ppm in 11X17)
•CLX-9201 series
•B&W : Up to 20 ppm in A4 (20 ppm in Letter)
•Color : Up to 20 ppm in A4 (20 ppm in Letter)
•B&W : Up to 10 ppm in A3 (10 ppm in 11X17)
•Color : Up to 10 ppm in A3 (10 ppm in 11X17)
Copyright© 1995-2016 SAMSUNG. All rights reserved. |
2-3 |
2. Product Specifications and Description
Item |
Specification |
|||
|
|
• |
CLX-9301 series |
|
|
|
|
• [Basic (Without 2nd EXIT)] |
|
|
|
|
- B&W : Up to 21 ipm in A4 (21 ipm in Letter) |
|
|
|
|
- Color : Up to 21 ipm in A3 (21 ipm in 11×17) |
|
|
|
|
- B&W : Up to 11 ipm in A4 (11 ipm in Letter) |
|
|
|
|
- Color : Up to 11 ipm in A3 (11 ipm in 11×17) |
|
|
|
|
• [With 2nd EXIT (Option)] |
|
|
|
|
- B&W : Up to 30 ipm in A4 (30 ipm in Letter) |
|
|
|
|
- Color : Up to 30 ipm in A3 (30 ipm in 11×17) |
|
|
|
|
- B&W : Up to 11 ipm in A4 (11 ipm in Letter) |
|
|
|
|
- Color : Up to 11 ipm in A3 (11 ipm in 11×17) |
|
|
|
• |
CLX-9251 series |
|
|
|
|
• [Basic (Without 2nd EXIT)] |
|
|
|
|
- B&W : Up to 17 ipm in A4 (17 ipm in Letter) |
|
|
|
|
- Color : Up to 17 ipm in A3 (17 ipm in 11×17) |
|
|
|
|
- B&W : Up to 9 ipm in A4 (9 ipm in Letter) |
|
|
Duplex |
|
- Color : Up to 9 ipm in A3 (9 ipm in 11×17) |
|
|
|
|
• [With 2nd EXIT (Option)] |
|
|
|
|
- B&W : Up to 25 ipm in A4 (25 ipm in Letter) |
|
|
|
|
- Color : Up to 25 ipm in A3 (25 ipm in 11×17) |
|
|
|
|
- B&W : Up to 9 ipm in A4 (9 ipm in Letter) |
|
|
|
|
- Color : Up to 9 ipm in A3 (9 ipm in 11×17) |
|
|
|
• |
CLX-9201 series |
|
|
|
|
• [Basic (Without 2nd EXIT)] |
|
|
|
|
- B&W : Up to 14 ipm in A4 (14 ipm in Letter) |
|
|
|
|
- Color : Up to 14 ipm in A3 (14 ipm in 11×17) |
|
|
|
|
- B&W : Up to 7 ipm in A4 (7 ipm in Letter) |
|
|
|
|
- Color : Up to 7 ipm in A3 (7 ipm in 11×17) |
|
|
|
|
• [With 2nd EXIT (Option)] |
|
|
|
|
- B&W : Up to 20 ipm in A4 (20 ipm in Letter) |
|
|
|
|
- Color : Up to 20 ipm in A3 (20 ipm in 11×17) |
|
|
|
|
- B&W : Up to 7 ipm in A4 (7 ipm in Letter) |
|
|
|
|
- Color : Up to 7 ipm in A3 (7 ipm in 11×17) |
|
|
|
|
||
|
|
• CLX-9301 series : Less than 9/11 sec (B&W/Color) |
||
|
From Ready |
• |
CLX-9251 series : Less than 9.5/11.5 sec (B&W/Color) |
|
FPOT (B&W and |
|
• CLX-9201 series : Less than 10/12.5 sec (B&W/Color) |
||
|
|
|
||
|
• |
CLX-9301 series : Less than 27/29 sec (B&W/Color) |
||
Color) |
|
|||
From Sleep |
• |
CLX-9251 series : Less than 28/30 sec (B&W/Color) |
||
|
||||
|
|
• CLX-9201 series : Less than 29/31 sec (B&W/Color) |
||
|
|
|
||
|
From Coldboot |
Less than 100/100 sec (B&W/Color) |
||
|
|
|
||
|
Optical |
600 x 600 dpi |
||
|
|
|
||
Resolution |
|
• Normal : 2400*600 dpi Effective Output (600 x 600 x 2bit) |
||
Enhanced |
• |
Best : 9600*600 dpi Effective Output (600 x 600 x 4bit) |
||
|
||||
|
|
• High Quality : Real 1200*1200 dpi |
||
|
|
|
|
2-4 |
Copyright© 1995-2016 SAMSUNG. All rights reserved. |
|
|
|
2. Product Specifications and Description |
|
|
|
|
Item |
|
Specification |
|
Printer Languages |
|
PCL5Ce, PCL6Ce, PostScript Level3C, TIFF, PDF 1.4, JPEG |
|
|
|
|
|
Fonts |
|
PCL:93 scalable, 1 bitmap, OCR-A, OCR-B, PS:136 |
|
|
|
|
|
Downloadable Fonts |
|
Yes (PCL & PS3 S/W Font) |
|
|
|
|
|
|
|
Secure Printing |
Yes |
|
|
|
|
|
|
Delayed |
No |
|
|
(Shceduled) |
|
Print Job (with |
|
Printing |
|
|
|
|
|
|
Proof printing |
No |
|
HDD ) |
|
||
|
|
Spool |
Yes |
|
|
|
|
|
|
Stored Printing |
Yes |
|
|
|
|
|
|
Form overlays |
No |
|
|
|
|
USB Memory Direct Print |
Jpeg, Tiff, PDF, Samsung PRN, TXT |
||
|
|
|
|
Copyright© 1995-2016 SAMSUNG. All rights reserved. |
2-5 |
2. Product Specifications and Description
Item |
Specification |
||
Processor |
MPU |
Chorus4N Dual Core 1GHz |
|
|
|
||
Image Processor |
Embedded in Chorus4N |
||
|
|||
|
|
|
|
DRAM |
Std. |
1GB DDR3 SDRAM |
|
|
|
||
Max. |
1GB DDR3 SDRAM |
||
|
|||
|
|
|
|
Memory Expansion |
N.A. |
||
|
|
|
|
|
|
320GB HDD Standard |
|
|
|
NOTE |
|
|
|
|
HDD Partition Map |
|
|
|
|
- Mandatory, 157GB for users, EXT3 file system |
|
Storage |
|
|
|
|
|
|
|
HDD_DOC partition is available for the user data storage. |
|
|
|
|
|
|
|
|
|
|
|
|
|
[Windows] |
|
|
|
|
|
• Windows 2000/ XP(32/64bit)/ 2003(32/64bit)/ Vista(32/64bit)/ 2008/ Win7/ |
|
|
|
|
2008 R2(64 only) |
|
|
|
[Linux] |
|
|
|
|
|
• RedHat Enterprise Linux WS 4, 5 (32/64bit) |
|
|
|
|
• Fedora 5, 6, 7, 8, 9, 10, 11, 12, 13 (32/64bit) |
|
|
Supporting OS |
|
• SuSE Linux 10.1 (32bit) |
|
Printer driver |
|
• OpenSuSE 10.2 10.3, 11.0, 11.1, 11.2 (32/64bit) |
|
|
|
|
|
||
|
|
|
• Mandriva 2007, 2008, 2009, 2009.1, 2010 (32/64bit) |
|
|
|
|
• Ubuntu 6.06, 6.10, 7.04, 7.10, 8.04 8.10, 9.04, 9.10, 10.04 (32/64bit) |
|
|
|
|
• SuSE Linux Enterprise Desktop 10, 11 (32/64bit) |
|
|
|
|
• Debian 4.0, 5.0 (32/64bit) |
|
|
|
|
|
|
|
|
[Mac] |
|
|
|
|
|
• Mac OS X 10.5 ~ 10.7 |
|
|
|
|
|
|
|
Default Driver |
PCL6 (For Windows), PS (for Mac, Linux) |
|
|
|
|
|
|
|
2-6 |
Copyright© 1995-2016 SAMSUNG. All rights reserved. |
|
|
|
2. Product Specifications and Description |
|
|
|
|
||
Item |
Specification |
|||
|
|
• |
[Windows] |
|
|
|
|
• Watermark, Overlay, N-up printing, Poster printing |
|
|
|
|
• Duplex, Quality, Color mode (Color, Gray scale) |
|
|
Driver feature |
|
• Support Color spec., Device color, color management |
|
|
|
• |
[Mac/Linux] |
|
|
|
|
• N-up printing, Duplex, Quality |
|
|
|
|
• Color mode (Color, Gray scale) |
|
|
|
|
|
|
|
WHQL |
|
|
|
|
(Windows |
Windows 2000/ XP(include 64bit)/ 2003/ Vista/ 2008/ Win7/ 2008 R2(64 only) |
||
|
Hardware Quality |
|||
|
|
|
||
|
Labs) |
|
|
|
|
|
|
||
|
Language |
23 countries( Arabic/ Portuguese Brazilian/ Simplified Chinese / Traditional |
||
|
Chinese/ Czech/ Danish/ Dutch/ Greek/ English/ Finnish/ French/ German/ Hebrew/ |
|||
|
Localization |
Hungarian/ Italian/ Korea/ Norweigian/ Polish/ Portuguese / Russian/ Spanish / |
||
|
|
Swedish /Turkish) |
||
|
|
|
|
|
|
Status Monitor |
Yes (Windows Only) |
||
|
(Lite SM) |
|||
|
|
|
||
|
|
|
|
|
|
TWAIN |
Yes |
|
|
|
|
|
|
|
|
WIA |
No |
|
|
|
|
|
||
|
|
[Windows] |
||
|
|
• Windows 2000/ XP(32/64bit)/ 2003(32/64bit)/ Vista(32/64bit)/ |
||
|
|
|
2008(32/64bit)/ Win7/ 2008 R2(64 only) |
|
|
|
|
||
|
|
[Linux] |
||
|
|
• RedHat Enterprise Linux WS 4, 5 (32/64bit) |
||
Scan driver |
|
• Fedora 5, 6, 7, 8, 9, 10, 11, 12, 13 (32/64bit) - SuSE Linux 10.1 (32bit) |
||
|
Supporting OS |
• OpenSuSE 10.2 10.3, 11.0, 11.1, 11.2 (32/64bit) |
||
|
|
• Mandriva 2007, 2008, 2009, 2009.1, 2010 (32/64bit) |
||
|
|
• Ubuntu 6.06, 6.10, 7.04, 7.10, 8.04 8.10, 9.04, 9.10, 10.04 (32/64bit) |
||
|
|
• SuSE Linux Enterprise Desktop 10, 11 (32/64bit) |
||
|
|
• Debian 4.0, 5.0 (32/64bit) |
||
|
|
|
||
|
|
[Mac] |
||
|
|
• Mac OS X 10.5 ~ 10.6 |
||
|
|
|
||
|
Scan Manager |
Yes (Win, Mac) |
||
|
|
|
||
|
Scan Assistant |
Yes (Win, Mac) |
||
|
|
|
|
|
|
PC-FAX |
No |
|
|
|
|
|
||
|
Network-FAX |
Yes (Win, Mac) |
||
|
|
|
|
|
|
Samsung Easy |
Yes (Win, Mac) |
||
Application |
Printer Manager |
|||
|
|
|||
|
|
|
||
Network |
Set IP, SWAS 5.0 & SWS 2.0 SWAS Plug-In : Job Accounting, Storage management, |
|||
|
||||
|
Management |
Cloning, Remote Install |
||
|
|
|
|
|
|
HDD File |
No |
|
|
|
Management S/W |
|
||
|
|
|
||
|
|
|
|
|
|
AnyWeb Print |
Yes |
|
|
|
|
|
||
|
SmarThru |
Smarthru Office, SmarThru Workflow(Optional) |
||
|
|
|
|
Copyright© 1995-2016 SAMSUNG. All rights reserved. |
2-7 |
2. Product Specifications and Description
■ Interface
Item |
Specification |
||
Parallel (IEEE 1284) |
No |
||
|
|
|
|
USB |
Type A, Host |
High-Speed USB 2.0 Host (2-port) |
|
|
|
||
Type B, Device |
Hi-Speed USB 2.0 Peripheral (1-port) |
||
|
|||
|
|
|
|
Wired LAN |
Ethernet 10/100/1000 Base TX |
||
|
|
||
Wireless LAN |
No |
||
|
|
||
Foreign Device Interface |
Optional |
||
|
|
|
■ Network Interface
Item |
Specification |
||
|
|
• Microsoft Windows 2000/ XP(32/64bits)/ 2003(32/64bits)/ Vista(32/64bits)/ |
|
|
|
Win7 |
|
|
|
[Mac] |
|
|
|
• Mac OS X 10.5 ~ 10.6 |
|
|
|
[Linux] |
|
|
|
• RedHat 8 ~ 9 |
|
Network OS |
• Fedora Core 1~4 |
||
|
|
• Madrake 9.2 ~ 10.1 |
|
|
|
• SuSE 8.2 ~ 9.2 |
|
|
|
[Novell] |
|
|
|
• Netware 5.x, 6.x(TCP/IP Only) |
|
|
|
[Others] |
|
|
|
• Unix(HP-UX,Solaris,SunOS, SCO) |
|
|
|
|
|
|
TCP/IP |
TCP/IPv4, HTTP, SNMPv1/v2c/v3, LDAP, SMTP, SSL/TLS, IPSec, DNS,WINS, |
|
|
SLP, Bonjour, SSDP,DDNS, DHCP/BOOTP,IPv6 |
||
|
|
||
|
|
|
|
|
IPX/SPX |
No |
|
|
|
|
|
Network Protocols |
Ether Talk |
No |
|
|
|
|
|
|
NetBIOS over |
Yes |
|
|
TCP/IP |
||
|
|
||
|
|
|
|
|
Others |
HTTPS, LDAPS, IPSec, 802.1x |
|
|
|
|
|
|
Static IP |
Yes |
|
|
|
|
|
IP Addressing |
Auto IP |
Yes |
|
|
|
||
BOOTP |
Yes |
||
|
|||
|
|
|
|
|
DHCP |
Yes |
|
|
|
|
2-8 |
Copyright© 1995-2016 SAMSUNG. All rights reserved. |
2. Product Specifications and Description
■ Memory (HDD) Management
Item |
|
Specification |
|
|
Type |
No |
|
|
|
|
|
|
Stored Job Type |
No |
|
Box Management |
|
|
|
Max. Number of |
No |
||
|
Boxes |
||
|
|
||
|
|
|
|
|
Box Size |
No |
|
|
|
|
|
|
Creation |
No |
|
|
|
|
|
|
Rename |
No |
|
|
|
|
|
|
Move & Copy |
No |
|
|
|
|
|
|
Delete |
No |
|
Document |
|
|
|
Search |
No |
||
Management |
|
|
|
Display detail |
No |
||
|
|||
|
information |
||
|
|
||
|
|
|
|
|
Select |
No |
|
|
|
|
|
|
Auto Delete Time |
No |
|
|
Setting |
||
|
|
||
|
|
|
|
|
Yes |
||
|
|
|
|
|
Client |
Yes |
|
|
|
|
|
Memory to |
i-Fax |
No |
|
|
|
|
|
|
Server |
Yes |
|
|
|
|
|
|
Multi Destination |
No |
|
|
|
|
|
|
Copies |
Yes |
|
|
|
|
|
|
Duplex Printing |
Yes |
|
|
|
|
|
Memory to Print |
Color Mode |
Yes |
|
|
|
||
Autofit |
Yes |
||
Setting |
|||
|
|
||
Paper Supply |
Yes |
||
|
|||
|
|
|
|
|
Binding Space |
1-50mm left, right, top, bottom (PC Print only) |
|
|
|
|
|
|
Erase Edge |
No |
|
|
|
|
|
Image Overwrite |
Immediate |
Yes |
|
|
|
||
On-Demand |
Yes |
||
|
|||
|
|
|
|
|
Supported Job |
Print / Copy / Scan / Fax |
|
|
Type |
||
Data Encrytion |
|
||
|
|
||
Cryptography |
AES |
||
|
|||
|
|
|
|
|
Key length |
256bit |
|
|
|
|
Copyright© 1995-2016 SAMSUNG. All rights reserved. |
2-9 |
2. Product Specifications and Description
Item |
|
Specification |
|
Scan method |
|
Color CCDM-MMT |
|
|
|
|
|
Compatibility |
|
TWAIN(N/W) |
|
|
|
|
|
Color Mode |
|
Mono / Gray / Color |
|
|
|
|
|
|
B/W (Lineart, |
ScanToEmail/SMB/FTP : 45ipm @ 300dpi (A4 LEF standard) |
|
|
Halftone) |
PC scan : 15 sec @300dpi (P4-3GHz, 1G, NW 100M, A4 LEF Standard) |
|
|
|
|
|
Scan Speed |
Gray |
ScanToEmail/SMB/FTP : 45ipm @ 300dpi (A4 LEF Standard) |
|
PC scan : 20 sec @300dpi (P4-3GHz, 1G, NW 100M, A4 LEF Standard) |
|||
|
|
||
|
|
|
|
|
Color |
ScanToEmail/SMB/FTP : 45ipm @ 300dpi (A4 LEF Standard) |
|
|
PC scan : 30 sec @300dpi (P4-3GHz, 1G, NW 100M, A4 LEF Standard) |
||
|
|
||
|
|
|
|
Resolution |
Optical |
600 x 600 ppi |
|
|
|
||
Enhanced |
4,800 x 4,800 ppi |
||
|
|||
|
|
|
|
Halftone |
|
256 levels |
|
|
|
|
|
|
Max. Document |
Max.297mm (11.7") |
|
|
Width |
||
|
|
||
|
|
|
|
Scan Size |
Effective Scan |
Max 291mm |
|
Width |
|||
|
|
||
|
|
|
|
|
Max. Document |
Max.432mm |
|
|
Length |
||
|
|
||
|
|
|
|
|
Color |
24 bits |
|
Scan Depth |
|
|
|
Mono |
• 1bit for Linearity & Halftone |
||
|
• 8Bits for Gray scale |
||
|
|
||
|
|
|
|
Multi-page Scan |
|
Platen & DADF |
|
|
|
|
|
|
HDD |
Yes (Shared Folder) |
|
|
|
|
|
|
USB |
Yes |
|
|
|
|
|
|
Yes |
||
|
|
|
|
|
Client |
Yes (N/W) |
|
|
|
|
|
Scan-to |
SMB |
Yes |
|
|
|
|
|
|
FTP |
Yes |
|
|
|
|
|
|
HTTP(S) |
No |
|
|
|
|
|
|
WebDAV |
No |
|
|
|
|
|
|
Multi Destination |
No |
|
|
|
|
|
|
Email, Fax, Server |
User Based Individual (Fax+Email+Server) : 500 |
|
|
|
||
|
Group : (Fax+Email) : 499 |
||
|
|
||
|
|
|
|
|
|
Searching |
|
|
|
|
|
Address Book |
|
Editing |
|
|
Basic Feature |
|
|
|
Deleting |
||
|
|
|
|
|
|
Grouping |
|
|
|
|
|
|
|
import, export |
|
|
|
|
2-10 |
Copyright© 1995-2016 SAMSUNG. All rights reserved. |
2. Product Specifications and Description
Item |
Specification |
||
|
Mixed Document |
Yes |
|
|
|
|
|
|
Scan Preset |
No |
|
|
|
|
|
|
Delayed Send |
No |
|
|
|
|
|
Scan Setting |
Job Done notice |
No |
|
|
|
||
Recent |
Yes |
||
|
|||
|
|
|
|
|
OCR |
No |
|
|
|
|
|
|
Job Build |
Yes |
|
|
|
|
|
|
Book Scan |
No |
|
|
|
|
Copyright© 1995-2016 SAMSUNG. All rights reserved. |
2-11 |
2. Product Specifications and Description
Item |
|
Specification |
|||
|
|
• |
CLX-9301 series |
||
|
|
|
• B&W Simplex: up to 30 cpm in A4 & Letter |
||
|
|
|
• Color Simplex: up to 30 cpm in A4 & Letter |
||
|
|
|
• B&W Duplex: up to 21 cpm in A4 & Letter |
||
|
|
|
• Color Duplex: up to 21 cpm in A4 & Letter |
||
|
|
• |
CLX-9251 series |
||
|
SDMC (Single |
|
• |
B&W Simplex: up to 25 cpm in A4 & Letter |
|
|
Document |
|
• |
Color Simplex: up to 25 cpm in A4 & Letter |
|
|
Multiple Copy) |
|
• |
B&W Duplex: up to 17 cpm in A4 & Letter |
|
|
|
|
• Color Duplex: up to 17 cpm in A4 & Letter |
||
|
|
• |
CLX-9201 series |
||
Copy Speed |
|
|
• |
B&W Simplex: up to 20 cpm in A4 & Letter |
|
(DADF) |
|
|
• |
Color Simplex: up to 20 cpm in A4 & Letter |
|
|
|
|
• B&W Duplex: up to 14 cpm in A4 & Letter |
||
|
|
|
• Color Duplex: up to 14 cpm in A4 & Letter |
||
|
|
|
|
||
|
|
• |
CLX-9301 series |
||
|
|
|
• |
Simplex-to-Duplex(1-2): up to 21 cpm in A4 & Letter |
|
|
|
|
• |
Duplex -to-Duplex(2-2): up to 16 cpm in A4 & Letter |
|
|
MDMC (Multiple |
• |
CLX-9251 series |
||
|
Document |
|
• |
Simplex-to-Duplex(1-2): up to 17 cpm in A4 & Letter |
|
|
Multiple Copy) |
|
• |
Duplex -to-Duplex(2-2): up to 16 cpm in A4 & Lette |
|
|
|
• |
CLX-9201 series |
||
|
|
|
• |
Simplex-to-Duplex(1-2): up to 14 cpm in A4 & Letter |
|
|
|
|
• |
Duplex -to-Duplex(2-2): up to 14 cpm in A4 & Letter |
|
|
|
|
|||
|
|
• CLX-9301 series : Less than 6/8 seconds (from platen, B&W/Color) |
|||
|
From Ready |
• |
CLX-9251 series : Less than 7/8 seconds (from platen, B&W/Color) |
||
FCOT (B&W and |
|
• CLX-9201 series : Less than 7.5/8.5 seconds (from platen, B&W/Color) |
|||
|
|
|
|
||
|
• |
CLX-9301 series : Less than 24/26 seconds (from platen, B&W/Color) |
|||
Color) |
|
||||
From Sleep |
• |
CLX-9251 series : Less than 25/27 seconds (from platen, B&W/Color) |
|||
|
|||||
|
|
• CLX-9201 series : Less than 26/28 seconds (from platen, B&W/Color) |
|||
|
|
|
|||
|
From Coldboot |
Less than 100/100 seconds (from platen, B&W/Color) |
|||
|
|
|
|||
Zoom Range |
|
25% ~ 400% in 1% increments (Platen/DADF) |
|||
|
|
|
|
||
Multi Copy |
|
1~9999 |
|
||
|
|
|
|
||
|
Text |
• |
Platen: Scan 600 x 600 dpi, Printing 600 x 600 x 2bit |
||
|
• DADF : Scan 600 x 600 dpi, Printing 600 x 600 x 2bit |
||||
|
|
||||
|
|
|
|
||
|
Text/Photo |
• |
Platen: Scan 600 x 600dpi, Printing 600 x 600 x 2bit |
||
|
• DADF : Scan 600 x 600dpi, Printing 600 x 600 x 2bit |
||||
|
|
||||
|
|
|
|
|
|
Original Type |
Magazine |
No |
|
|
|
|
|
|
|
||
|
Photo |
• |
Platen: Scan 600 x 600 dpi, Printing 600 x 600 x 4bit |
||
|
• DADF : Scan 600 x 600 dpi, Printing 600 x 600 x 4bit |
||||
|
|
||||
|
|
|
|
||
|
Copied Original |
• |
Platen: Scan 600 x 600 dpi, Printing 600 x 600 x 2bit |
||
|
• DADF : Scan 600 x 600 dpi, Printing 600 x 600 x 2bit |
||||
|
|
||||
|
|
|
|
|
2-12 |
Copyright© 1995-2016 SAMSUNG. All rights reserved. |
|
|
|
2. Product Specifications and Description |
|
|
|
|
||
Item |
|
Specification |
||
|
Map |
• |
Platen: Scan 600 x 600 dpi, Printing 600 x 600 x 2bit |
|
|
• DADF : Scan 600 x 600 dpi, Printing 600 x 600 x 2bit |
|||
|
|
|||
|
|
|
|
|
|
Light Original |
• |
Platen: Scan 600 x 600dpi, Printing 600 x 600 x 2bit |
|
|
• DADF : Scan 600 x 600dpi, Printing 600 x 600 x 2bit |
|||
|
|
|||
|
|
|
||
Original Type |
Factory Default |
Color Copy Text/Photo (Mixed) Mode |
||
|
|
|
|
|
|
Auto Color |
Yes |
|
|
|
|
|
|
|
|
Full Color |
Yes |
|
|
|
|
|
|
|
Color Setting |
Twin Color |
No |
|
|
|
|
|
|
|
|
Single Color |
No |
|
|
|
|
|
|
|
|
B&W |
Yes |
|
|
|
|
|
||
Max. Original Size |
Platen |
297 x 432 mm (11.7" x 17") |
||
|
|
|
||
DADF |
297 x 432 mm (11.7" x 17") |
|||
|
||||
|
|
|
||
|
Multi Copy |
1~9999 |
||
|
|
|
|
|
|
Automatic Paper |
Yes |
|
|
|
Selection |
|
||
|
|
|
||
|
|
|
|
|
|
Manual Paper |
Yes |
|
|
|
Selection |
|
||
|
|
|
||
|
|
|
||
|
Multi-page Copy |
Platen & DADF |
||
|
|
|
||
|
|
Using Platen |
||
|
|
• |
1→1Sided |
|
|
|
• 1→2Sided (Output : Book, Calendar) |
||
Basic Copy |
Duplex Copy |
Using DADF |
||
|
• |
1→1Sided |
||
|
|
|||
|
|
• 1→2Sided (Output: Book, Calendar) |
||
|
|
• 2→1Sided (Original: Book, Calendar) |
||
|
|
• 2→2Sided (Original: Book, Calendar, Output: Book, Calendar) |
||
|
|
|
||
|
Darkness Control |
11 Levels |
||
|
|
|
|
|
|
Collation Copy |
Yes |
|
|
|
|
|
||
|
|
* Zoom Range : 25% to 400% in Platen and DADF |
||
|
Reduce & Enlarge |
* Preset: [Original(100%)] [Auto Fit] … 25%, 50%, 150%, 200%, 400% |
||
|
|
[Custom:25-400%)] |
||
|
|
|
|
|
|
Proof Copy |
No |
|
|
|
|
|
||
|
N-Up |
2up ~ 32 up |
||
|
|
|
||
|
ID Card Copy |
Yes (Platen only) |
||
|
|
|
|
|
|
Poster Copy |
No |
|
|
|
|
|
|
|
|
Clone Copy |
No |
|
|
Other Features |
(Image Repeat) |
|
|
|
|
Booklet |
No |
|
|
|
|
|
|
|
|
Covers |
Yes |
|
|
|
|
|
|
|
|
Transparencies |
No |
|
|
|
|
|
||
|
Book Copy |
Yes (Platen only) |
||
|
|
|
|
|
|
Scan to Document |
No |
|
|
|
|
|
|
Copyright© 1995-2016 SAMSUNG. All rights reserved. |
2-13 |
2. Product Specifications and Description
Item |
|
Specification |
|
Margin Shift |
No |
|
|
|
|
Book Center Erase |
Yes |
|
|
|
|
Form Copy |
No |
|
|
|
|
Watermark Copy |
Yes |
|
|
|
|
Stamp |
Yes |
Image |
|
|
Job Program |
Yes |
|
|
|
|
|
Adjust |
Auto, Erase(4 levels), Enhance(2 levels) |
|
Background |
|
|
|
|
|
Job Build |
Yes |
|
|
|
|
Rotation Copy |
No |
|
|
|
|
Mirror |
No |
|
|
|
Item |
|
Specification |
Compatibility |
|
ITU-T G3, Super G3 |
|
|
|
Communication System |
PSTN/PABX |
|
|
|
|
Modem Speed |
|
33.6 Kbps |
|
|
|
TX Speed |
|
3 sec (Mono/Standard/ECM-MMR, ITU-T G3 No.1 Chart,A4) |
|
|
|
Compression |
|
MH/MR/MMR/JBIG/JPEG |
|
|
|
Color Fax |
|
Yes |
|
|
|
ECM |
|
Yes |
|
|
|
|
Std |
203*98 dpi |
|
|
|
|
Fine |
203*196 dpi |
|
|
|
Resolution (Mono) |
S.Fine Photo |
No |
|
|
|
|
S.Fine |
300*300 dpi |
|
|
|
|
Ultra Fine |
600*600 dpi |
|
|
|
|
Std |
1.5sec/LTR |
|
|
|
Scan speed |
Fine |
4sec/LTR |
|
|
|
|
S.Fine |
Depends on Document |
|
|
|
|
Handset |
No |
|
|
|
|
On hook Dial |
Yes |
|
|
|
|
Search |
Yes (Phone Book) |
|
|
|
|
Speed Dial |
500 locations |
|
|
|
Telephone |
Group Dial |
Max. 100 Groups (Max. locations per 1 Group : 100 locations) |
Features |
TAD I/F |
Yes |
|
|
|
|
Tone/Pulse |
Yes |
|
|
|
|
Pause |
Yes |
|
|
|
|
Auto Redial |
Yes |
|
|
|
|
Redial |
Yes |
|
|
|
2-14 |
Copyright© 1995-2016 SAMSUNG. All rights reserved. |
2. Product Specifications and Description
Item |
|
Specification |
|
|
Distinctive Ring |
No |
|
|
|
|
|
|
Caller ID |
Yes |
|
|
|
|
|
|
External Phone |
No |
|
|
Interface |
||
|
|
||
|
|
|
|
|
Mail Box |
No |
|
|
|
|
|
|
Voice Request |
No |
|
|
|
|
|
|
TTI |
Yes |
|
|
|
|
|
|
RTI |
Yes |
|
|
|
|
|
|
Polling |
No |
|
|
|
|
|
|
Earth/Recall |
No |
|
|
|
|
|
|
Auto Reduction |
Yes |
|
|
|
|
|
|
SMS |
No |
|
|
|
|
|
|
Multi-send |
Same as Group Dial Capacity. |
|
Functions |
|
|
|
Delayed Send |
Yes |
||
|
|
|
|
|
Memory RX |
Yes |
|
|
|
|
|
|
Secure Rx |
Yes |
|
|
|
|
|
|
Time Secured Fax |
Yes |
|
|
|
|
|
|
Relay |
|
|
|
Transmission |
No |
|
|
(ITU-T Mail Box) |
|
|
|
|
|
|
|
Priority |
No |
|
|
Transmission |
||
|
|
||
|
|
|
|
|
Batch |
No |
|
|
Transmission |
||
|
|
||
|
|
|
|
|
Searching |
Yes |
|
|
|
|
|
|
Storing |
Yes |
|
|
|
|
|
Address Book |
Editing |
Yes |
|
|
|
||
Deleting |
Yes |
||
Basic Feature |
|||
|
|
||
Grouping |
Yes |
||
|
|||
|
|
|
|
|
Chaining |
No |
|
|
|
|
|
|
import, export |
Yes |
|
|
|
|
|
|
Search condition |
No |
|
|
|
|
|
|
Favorites Button |
No |
|
Address Book |
|
|
|
Curent Sending |
|
||
Advanced |
, Receiving Tel |
Yes(Curent Sending ) |
|
|
number |
|
|
|
|
|
|
|
LDAP |
Yes |
|
|
|
|
Copyright© 1995-2016 SAMSUNG. All rights reserved. |
2-15 |
2. Product Specifications and Description
Item |
|
Specification |
|
|
|
Check the Success |
Yes |
|
|
or Fail & Error |
|
|
|
Re-Faxing from |
|
|
|
memory in case of |
Yes |
Sending fax |
|
failed Fax |
|
Management |
|
Re-Faxing in case |
Yes |
|
|
of failed page. |
|
|
|
|
|
|
|
|
|
|
|
Delete in memory |
|
|
|
after sending |
Yes |
|
|
completely |
|
|
|
|
|
|
|
Separator Sheet |
No |
|
|
|
|
|
|
Insert the stamp |
Yes(Option -On,Off) Rx Time ,ID, Page |
|
|
|
|
Fax Receiving |
|
NumberofPrinting |
No |
Feature/ Printing |
|
Copies |
|
the Rx Document |
|
|
|
|
Revers order |
No |
|
|
|
||
|
|
printing |
|
|
|
|
|
|
|
|
|
|
|
tray selection |
Yes |
|
|
|
|
|
|
Tx/Rx Journal |
Yes |
|
|
|
|
Report & List Print |
|
Confirmation |
2 type(Image TCR or w/o Image TCR) |
out |
|
Auto Dial List |
No |
|
|
|
|
|
|
System Data List |
No |
|
|
|
|
|
|
Ring Volume |
Yes (7 steps and mute) |
|
|
|
|
Sound Control |
|
Key Volume |
Yes (7 steps and mute) |
|
|
|
|
|
Speaker |
Yes (7 steps and mute) |
|
|
|
||
|
|
|
|
|
|
Alarm Volume |
Yes (7 steps and mute) |
|
|
|
|
Junk Fax barrier |
|
No |
|
|
|
|
|
Security Receive |
|
Yes |
|
|
|
|
|
Battery Backup |
|
Permanently stored on HDD |
|
|
|
|
|
Duplex |
|
Send |
Yes |
|
|
|
|
|
Receive |
Yes |
|
|
|
||
|
|
|
|
Receive Mode |
|
Fax, TEL, Ans/Fax |
|
|
|
|
|
Battery Backup |
|
HDD Store, 500 jobs |
|
|
|
|
|
Fax Forward to FAX |
|
No |
|
|
|
||
Fax Forward to e-mail |
Yes |
||
|
|
|
|
Broadcasting |
|
up to 505 locations |
|
|
|
|
|
Cover page |
|
No |
|
|
|
|
|
2-16 |
Copyright© 1995-2016 SAMSUNG. All rights reserved. |