Samsung CS-29T11MA, CS-29M21MA, CS-29Q2PA, CS-25M21MA, CS-21T4MA User Manual

COLOUR

TELEVISION

Owner’s Instructions

Before operating the unit, please read this manual thoroughly,

and retain it for future reference.

REMOTE CONTROL

ON-SCREEN MENUS

PICTURE IN PICTURE FUNCTION

GAME FUNCTION

ENG

Safety Instructions

ENG

The following illustrations represent the precautions to be taken when using and moving your television.

10%	35°	75%
H	5°	H

Do NOT expose the television to extreme temperature conditions or to extreme humidity conditions.

Do NOT expose the television to direct sunlight.

Do NOT expose the television to any liquids.

If the television is broken, do not try to repair it yourself. Contact qualified service personnel.

During a storm conditions (especially when there is lightning) unplug the television from the mains socket and aerial.

If the remote control is not used for a long period of time, remove the batteries and store it in a cool, dry place.

THIS DEVICE IS NOT FOR USE IN INDUSTRIAL ENVIRONMENTS

Please use a soft and dry cloth (not containing volatile matter) when you clean the TV.

Caution

								The lightning flash and arrow head
			CAUTION		!			within the triangle is a warning sign
			RISK OF ELECTRIC SHOCK					alerting you of “dangerous voltage”
								inside the product.
			DO NOT OPEN
								The exclamation point within the		!
		CAUTION: TO PREVENT ELECTRICAL			SHOCK, DO
								triangle is a warning sign alerting
		NOT REMOVE REAR COVER, NO USER			SERVICEABLE			you of important instructions
		PARTS INSIDE. REFER SERVICING TO QUALIFIED
								accompanying the product.
		SERVICE PERSONNEL.
	WARNING: TO PREVENT DAMAGE WHICH MAY
								Mode	System
	RESULT IN FIRE OR SHOCK HAZARD. DO NOT EXPOSE THIS
								CZ	PAL-B/G, D/K, I, SECAM-B/G,D/K, I,
	APPLIANCE TO RAIN OR MOISTURE.
									NTSC4.43
	The main voltage is indicated on the rear
								CW	PAL-B/G, D/K, I, SECAM-B/G,D/K, I, L/L’,
		of the TV set and the frequency is 50 or							NTSC4.43
		60Hz.						CS	PAL-B/G, D/K, I, SECAM-B/G,D/K, I,
									NTSC4.43/3.58

2

Contents

ENG

FOREWORD
■	Safety Instructions .........................................................................................	2
■	Caution ..........................................................................................................	2
CONNECTING AND PREPARING YOUR TELEVISION
■ Control Panels (depending on the model) .....................................................		5
■ Connection Panels (depending on the model) ..............................................		6
■	Infrared Remote Control (depending on model) ...........................................	8
■ Inserting the Batteries in the Remote Control................................................		10
■ Connecting to an Aerial or Cable Television Network ...................................		10
■ Switching Your Television On and Off...........................................................		11
■ Placing Your Television in Standby Mode .....................................................		11
■ Becoming Familiar with the Remote Control .................................................		12
■ Plug & Play Feature (depending on the model).............................................		13
■	Viewing the Demonstration............................................................................	14
■	Choosing Your Language..............................................................................	14
SETTING THE CHANNELS
■	Storing Channels Automatically.....................................................................	15
■	Turbo Store ...................................................................................................	16
■	Storing Channels Manually............................................................................	16
■	Skipping Unwanted Channels .......................................................................	18
■ Sorting the Stored Channels .........................................................................		19
USING YOUR TELEVISION
■ Changing the Picture Standard .....................................................................		20
■	Channel Scan ...............................................................................................	20
■ Adjusting the Picture Settings........................................................................		21
■ Selecting the Picture Size..............................................................................		22
■	Extra Picture Settings ....................................................................................	23
■ Using the Tilt Control Feature (depending on the model)..............................		24
■ Setting the Blue Screen.................................................................................		24
■ Changing the Sound Standard ......................................................................		25
■ Adjusting the Sound Settings ........................................................................		25
■	Enjoying the Woofer Sound (depending on the model.) .............................	26
■ Extra Sound Settings (depending on the model)...........................................		27
■	Selecting the Melody .....................................................................................	28
■ Selecting the Sound Mode (depending on the model) ..................................		29
■ Setting and Displaying the Current Time.......................................................		30
■ Setting the Sleep Timer .................................................................................		31
■ Switching the Television On and Off Automatically .......................................		32
■ Setting the Preferred Volume Level...............................................................		33
■	Setting the Reminder ....................................................................................	34
■ Using the LNA (Low Noise Amplifier) feature (depending on the model) ......		36
■ Settings for Pic 'n' Choose ........................................................................		36
■ Activating the Child Lock ...............................................................................		37
■ Viewing an External Signal Source (depending on the model) .....................		38
■ Viewing the Picture In Picture (PIP) (depending on the model) ....................		39
■	Enjoying Games ............................................................................................	42

3

ENG

Contents (continued)

ADDITIONAL INFORMATION ON CONNECTIONS
■ Connecting to the AV-1 or 2 Input/Outputs....................................................	43
■ Connecting to the S-VIDEO Input (depending on the model)........................	43
■ Connecting to the DVD Input (depending on the model)...............................	44
■ Connecting to the RCA Input (depending on the model)...............................	44
■ Connecting to the Audio Output (depending on the model) ..........................	44
■ Connecting Headphones (depending on the model) .....................................	45
■ Viewing Pictures From External Sources (depending on the model) ............	45
RECOMMENDATIONS FOR USE
■ Automatic Degaussing to Remove Colour Patches.......................................	46
■ Troubleshooting: Before Contacting Service Personnel................................	46

Symbols
Press	Important	Note

4

Control Panels (depending on the model)

	ENG
	Buttons and markings are subject to change.
	TV/VIDEO SELECTION
	MENU DISPLAY
	VOLUME ADJUSTMENT
	CHANNEL SELECTION
	STAND-BY/TIMER INDICATOR
	*STAND-BY INDICATOR
	REMOTE CONROL SENSOR
	POWER
Using the Front Panel Controls

If the remote control no longer works or you have lost it, you can use controls on the panel of the TV to:

Switch on the TV when it is in Standby mode and select channels ( CH or CH ).

Access the menu ( MENU ).

Adjust the volume ( - VOL + ).

Switch among Video input modes ( TV/VIDEO ).

How to use the CH / buttons to switch among Video input modes (the model without TV/VIDEO button):

...199 0 1 2 1 2 ...

... 2 1 1 2 0 199 ...

...199 0 1 2 ...

The control-symbols on the TV front panel are the same as the ones used on the remote control.

5

Connection Panels (depending on the model)

ENG

This figure shows the Standard Connector-jack panel.

The actual configuration on your TV may be different, depending on

the model.

Side of TV

Front of TV

ŒCONNECTING EXTERNAL A/V DEVICES (INPUT)

The RCA (VIDEO + AUDIO-L and R) connectors are used for equipment such as camcorders, video disc players and some video game devices.

When both the side (or front) and rear connectors are connected to external equipment, the side (or front) AV has the priority.

When using the mono equipment such as camcorders, video disc players and some video game devices, connect to the “AUDIO-L” input connector.

´CONNECTING EXTERNAL S-VIDEO DEVICES (INPUT) (Option)

- Video and audio inputs for external devices with an S-Video output, such as a camcorder or VCR.

ˇCONNECTING HEADPHONES (Option)

-You can connect a set of headphones to your television if you wish to watch a television programme without disturbing the other people in the room.

-Prolonged use of headphones at a high volume may damage your hearing.

Whenever you connect an audio or video system to your television, ensure that all elements are switched off.

Refer to the documentation supplied with your equipment for detailed connection instructions and associated safety precautions.

6

Connection Panels (depending on the model) (continued)

ENG

Rear of TV

ŒMONITOR OUT (VIDEO / L-AUDIO-R)

Outputs for external devices.

´AV 1 (VCR) -VIDEO/L-AUDIO-R AV 2 (VCR) -VIDEO/L-AUDIO-R

Inputs or outputs for external devices, such as VCR,DVD, video game device or video disc players.

ˇCOMPONENT (DVD)

Video (Y/PB/PR) and audio (L/R) inputs for Component.

¨VHF/UHF (75Ω)

75Ω Coaxial connector for Aerial/ Cable Network.

ˆ / (SCART)

Inputs or outputs for external devices, such as VCR, DVD, video game device or video disc players.

Available format for Component Inputs : 480i

When using the mono equipment such as camcorders, video disc players and some video game device, connect to the “AUDIO-L” input connector.

7

		Infrared Remote Control (depending on model)
		Buttons and markings are subject to change.
ENG

TELEVISION STAND-BY

DIRECT CHANNEL SELECTION

ONE/TWO/THREE-DIGIT

CHANNEL SELECTION

VOLUME INCREASE

TEMPORARY SOUND SWITCH-OFF

VOLUME DECREASE

TUNER/CABLE NETWORK

SELECTION

MENU DISPLAY

MOVE TO THE REQUIRED MENU

OPTION/

ADJUST AN OPTION VALUE

RESPECTIVELY

SOUND EFFECT SELECTION

GAME KEY

TURBO SOUND

CHANNEL SCAN KEY

SWITCH REPEATEDLY BETWEEN THE LAST TWO CHANNELS DISPLAYED

NEXT CHANNEL

EXTERNAL INPUT SELECTION

PREVIOUS CHANNEL

INFORMATION DISPLAY

EXIT FROM ANY DISPLAY

CHANGE CONFIRMATION

PICTURE SIZE

AUTOMATIC SWITCH OFF

PICTURE MODEL SLECTION

SOUND MODE SELECTION

The performance of the remote control may be affected by bright light.

8

Infrared Remote Control (depending on the model)

Buttons and markings are subject to change.

ENG

TELEVISION STAND-BY

PICTURE SIZE

SOUND MODE SELECTION

DIRECT CHANNEL SELECTION

ONE/TWO /THREE-DIGIT

CHANNEL SELECTION

VOLUME INCREASE

TEMPORARY SOUND SWITCH-OFF

VOLUME DECREASE

TUNER/CABLE NETWORK

SELECTION

MENU DISPLAY

MOVE TO THE REQUIRED MENU

OPTION/

ADJUST AN OPTION VALUE

RESPECTIVELY

SOUND MENU DISPLAY

TURBO SOUND

FOR PIP FUNCTION

GAME KEY

AUTOMATIC SWITCH-OFF

SWITCH REPEATEDLY

BETWEEN THE LAST TWO

CHANNELS DISPLAYED

NEXT CHANNEL

EXTERNAL INPUT SELECTION

PREVIOUS CHANNEL

INFORMATION DISPLAY

EXIT FROM ANY DISPLAY

CHANGE CONFIRMATION

SOUND EFFECT SELECTION

PICTURE EFFECT SELECTION

CHANNEL SCAN KEY

PIP FUNCTIONS (OPTION); - PIP ON/OFF

- STILL

-INTERCHANGE THE MAIN AND SUB PICTURE (SWAP)

-SOURCE SELECTION (TV/VIDEO)

-SIZE SELECTION (SIZE)

-LOCATION SELECTION (POSITION)

- CHANNEL SELECTION (P / )

The performance of the remote control may be affected by bright light.

9

Inserting the Batteries in the Remote Control

ENG

You must insert or replace the batteries in the remote control when you:

Purchase the television

Find that the remote control is no longer operating correctly

1Remove the cover on the rear of the remote control by pressing the symbol () downwards and then pulling firmly to remove it.

2Insert two R03, UM4, “AAA” 1.5V or equivalent batteries taking care to respect the polarities:

- on the battery against - on the remote control+ on the battery against + on the remote control

3 Replace the cover by aligning it with the base of the remote control and pressing it back into place.

Connecting to an Aerial or Cable Television Network

Rear of the TV

or

Cable Television

Network

	P 4				Mono

10

To view television channels correctly, a signal must be received by the set from one of the following sources:

An outdoor aerial

A cable television network

A satellite network

1 In the first three cases, connect the aerial or network input cable to the 75Ω coaxial socket on the rear of the television.

2If you are using an indoor aerial, you may need to turn it when tuning your television until you obtain a picture that is both sharp and clear.

For further details, refer to:

“Storing Channels Automatically” on page 15.

“Storing Channels Manually” on page 16.

Signal Strength( ) display (Option)

The “ ”(Signal Strength) symbol is displayed by

pressing the “INFO ()” button. This symbol displays signal strength for your watching TV channel. The more signal bar is the better TV gets sensitivity on current channel.

Switching Your Television On and Off

The mains lead is attached to the rear of your television.

1Plug the mains lead into an appropriate socket.

The main voltage is indicated on the rear of the television and the frequency is 50 or 60Hz.

2Press the “ ” button (On/Off) on the front of the television.

Result: The Standby indicator on the front of the television lights up.

3Press the POWER () button on the remote control to switch the television on.

Result: The programme that you were watching last is reselected automatically.

If you have not yet stored any channels, No clear picture appears. Refer to “Storing Channels Automatically” on page 15 or “Storing Channels Manually” on page 16.

4To switch your television off, press the “ ” button (On/Off) again.

Placing Your Television in Standby Mode

Your television can be placed in Standby mode, in order to reduce:

Power consumption

Wear of the cathode ray tube

The Standby mode can be useful when you wish to interrupt viewing temporarily (during a meal, for example).

1Press the POWER () button on the remote control.

Result: The screen is turned off and the Standby indicator on the front of the television lights up in red.

2To switch the television back on, simply press the POWER () button again.

You can also switch on by pressing the P or button.

Do not leave your television in Standby mode for long periods of time (when you are away on holiday, for

example). Turn your television off by pressing the “ ” button (On/Off) on the front of the television. It is best to unplug the set from the mains and aerial.

ENG

11

Becoming Familiar with the Remote Control

ENG

The remote control is used mainly to:

Change channels and adjust the volume

Set up the television using the on-screen menu system

The following table presents the most frequently used buttons and their functions.

Button			Viewing Function	Menu Function
			Used to display the next	-
			stored channel.
			Used to display the previous	-
			stored channel.
	to		Used to display the corresponding channels.
-/--/---			Used to select a channel numbered ten or over.

Press this button, and the "--" "---" symbol is displayed.

Enter the two or three digit channel number.

PRE-CH	Press the PRE-CH button. The TV will switch to the last
	channel viewed.
	To quickly switch between two channels that are far apart,
	tune to one channel, then use the number button to select
	second channel. Then, use the PRE-CH button to quickly
	alternate between them.
	Used to increase the	-
	volume.
	Used to decrease the	-
	volume.
MUTE	Used to switch the sound off temporarily.
	To turn the sound back on, press this button again, or
	press the - or + button.
MENU	Used to display the	Used to return to the previous
	on-screen menu system.	menu or normal viewing.
	-	Used to:
		Display a submenu
		containing selections for
		the current menu option
		Increase/decrease a
		menu option value
	-	Used to confirm your choice.
EXIT	-	Used to exit from the menu
		system and return to normal
		viewing directly.
TV	Used to switch the
	television on when it is
	in Standby mode.
12

Plug & Play Feature (depending on the model)

When the television is initially powered on, three basic customer settings proceed automatically and subsequently: setting the language, channel and clock.

1If the television is in Standby mode, press the POWER () button on the remote control.

Result: The message Plug & Play is displayed. It flickers for a little while and then Language menu is automatically displayed.

2Select the appropriate language by pressing the ▼ or ▲ button. Press the ENTER () button to enter the language.

Result: The message Check antenna input. is displayed.

If any language is not selected on the Language menu, the Language menu will disappear about 30 seconds later.

3Make sure that the antenna is connected to the TV. Press the ENTER () button.

Result: The Auto Store menu is displayed with Area is selected.

4Press the ENTER () button again. Select your area by pressing the ▼ or ▲ button, and then Press the ENTER () button.

To search the channels, select Search by pressing the ▼ or ▲

button, and then press the ENTER () button.

Press the ENTER () button again to start search the channels. Press the MENU () button to stop the search.

Result: The Time menu is displayed with Clock is selected.

Refer to “Storing Channels Automatically” on page 15.

5Press the Wor X button to move to the hour or minute. Set the hour or minute by pressing the ▼ or ▲ button.

Refer to “Setting and Displaying the Current Time” on page 30.

6When you have finished, press the MENU () button.

Result: The message Enjoy your watching is displayed, and then the channel which has been stored will be activated.

7If you want to reset this feature...

1 Press the MENU () button.

2Press the ▼ or ▲ button to select Setup, and then press the ENTER () button.

Result: The Plug & Play is selected.

3Press the ENTER () button again.

Result: This feature starts with the message Plug & Play is displayed.

ENG

Plug & Play

Language

English

Hindi

Move	Enter
Check antenna input.
Enter	Exit
TV	Auto Store
Area	: ASIA W/EUROPE √
Search	√

Move

Enter

Return

Search

Start

Enter

Return

TV

Time

Clock

-- : -- am

Sleep Timer

: Off

On Timer

-- : -- am Off

Off Timer -- : -- am Off

On Timer Volume

: 10

Move

Enter

Return

Enjoy your watching

TV

Setup

Plug & Play

√

Language

: English

√

Time

Child Lock

√

Blue Screen

: Off

√

Melody

: On

√

Demonstration

√

Move

Enter

Return

13

Viewing the Demonstration
ENG
		To become familiar with the various menus provided by your
		television, you can view the in built demonstration.
		1	Press the MENU (		) button.
			Result:	The main menu is displayed.
		2	Press the ▼ or ▲ button to select Setup.
			Result:	The options available in the Setup group are
				displayed.
		3	Press the ENTER (		) button.
		4	Press the ▼ or ▲ button to select Demonstration.
TV	Setup	5	Press the ENTER (		) button.
Plug & Play		√	Result:	Each of the menu options is displayed in turn.
Language	: English
Time		√	When you wish to exit from the demonstration, press the
Child Lock		√
Blue screen	: Off	√	EXIT ( ) button on the remote control.
Melody	: On	√
Demonstration		√

Move

Enter

Return

Choosing Your Language

	TV						Setup
			Plug & Play						√
			Language				: English
			Time						√
			Child Lock						√
			Blue screen				: Off		√
			Melody				: On		√
			Demonstration						√
	Move					Enter			Return

When you start using your television for the first time, you must select the language which will be used for displaying menus and indications.

1Press the MENU () button.

Result: The main menu is displayed.

2Press the ▼ or ▲ button to select Setup.

Result: The options available in the Setup group are displayed.

3Press the ENTER () button.

4Press the ▼ or ▲ button to select Language.

5Select the appropriate language by pressing the ENTER () button repeatedly.

14

Storing Channels Automatically

You can scan for the frequency ranges available to you (and availability depends on your country). Automatically allocated programme numbers may not correspond to actual or desired programme numbers. However you can sort numbers manually and clear any channels you do not wish to watch.

1Press the MENU () button.

Result: The main menu is displayed.

2Press the ▼ or ▲ button to select Channel.

Result: The options available in the Channel group are displayed.

3Press the ENTER () button.

Result: The Auto Store is selected.

4Press the ENTER () button again.

Result: The options available in the Auto Store group are displayed with Area is selected.

5Press the ENTER () button again.

6Select your area by pressing the ▼ or ▲ button, then press the

ENTER () button.

The areas are displayed in the following order:

ASIA W/EUROPE - CIS E/EUROPE - CHINA - HONGKONG U/K - AUSTRALIA - NZ/INDONESIA - SOUTH AFRICA - AMERICA

7Press the ▼ or ▲ button to select Search, then press the ENTER () button.

8Press the ENTER () button to start the search.

Result: The horizontal bar is displayed, and then channels are stored in an order which reflects their positions in the frequency range. Finally, the search will end automatically.

To stop the search before it has finished, press the MENU () button.

9When searching and storing are complete, the Sort menu is displayed.

To sort the stored channels into the desired numerical order, go to Step 6 of the “Sorting the Stored Channels” procedure on page 19.

To exit from the channel store function without sorting the

channels, press the MENU () button repeatedly until the menus disappear.

10When the channels have been stored, you can:

Sort them in the order required (refer to page 19)

Clear a channel (refer to page 18)

Activate the Digital Noise Reduction feature (refer to page 23)

ENG

	TV					Channel
			Auto Store						√
			Turbo Store						√
			Manual Store						√
			Add/Delete						√
			Sort						√
			LNA			: Off			√
	Move				Enter			Return
	TV				Auto Store
			Area		:	ASIA W/EUROPE			√
			Search			CIS E/EUROPE			√
						CHINA
						HONGKONG U/K
						AUSTRALIA
						NZ/INDONESIA
						SOUTH AFRICA
						AMERICA
	Move				Enter			Return
	TV				Auto Store
			Area		: ASIA W/EUROPE				√
			Search						√

Move

Enter

Return

Search

Start

Enter

Return

Search

P1

102 MHZ

7%

Stop

Enter

Return

TV

Sort

From

: P 1

To

: P--

Store

: ?

Move

Adjust

Return

15