Samsung CS-29V5MQ, CS-29D8W, CS-29K3N, CS-29D8WT, CS-29D8S User Manual [en, ms]

COLOUR

TELEVISION

Owner’s Instructions

Before operating the unit, please read this manual thoroughly,

and retain it for future reference.

REMOTE CONTROL

ON-SCREEN MENUS

TELETEXT FUNCTION (depending on the model)

Safety Instructions

ENG

The following illustrations represent the precautions to be taken when using and moving your television.

10%	35°	75%
H	5°	H

Do NOT expose the television to extreme temperature conditions (below 5°C and above 35°C) or to extreme humidity conditions (less than 10% and more than 75%).

If the television is broken, do not try to repair it yourself. Contact qualified service personnel.

Do NOT expose the television to direct sunlight.

During a storm conditions (especially when there is lightning) unplug the television from the mains socket and aerial.

Do NOT expose the television to any liquids.

If the remote control is not used for a long period of time, remove the batteries and store it in a cool, dry place.

THIS DEVICE IS NOT FOR USE IN INDUSTRIAL ENVIRONMENTS

Caution

CAUTION

RISK OF ELECTRIC SHOCK	!
DO NOT OPEN

CAUTION: TO PREVENT ELECTRICAL SHOCK, DO NOT REMOVE REAR COVER, NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

WARNING: TO PREVENT DAMAGE WHICH MAY RESULT IN FIRE OR SHOCK HAZARD. DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

The main voltage is indicated on the rear of the TV set and the frequency is 50 or 60Hz.

The lightning flash and arrow head within the triangle is a warning sign alerting you of “dangerous voltage” inside the product.

The exclamation point within the		!
triangle is a warning sign alerting
you of important instructions
accompanying the product.
Mode	System
CZ	PAL-B/G, D/K, I, SECAM-B/G,D/K, I,
	NTSC4.43
CW	PAL-B/G, D/K, I, SECAM-B/G,D/K, I, L/L’,
	NTSC4.43
CS	PAL-B/G, D/K, I, SECAM-B/G,D/K, I,
	NTSC4.43/3.58

2

	Contents
PREPARING YOUR TELEVISION		ENG
■	Safety Instructions .........................................................................................	2
■	Caution ..........................................................................................................	2
■	Front Control Panel .......................................................................................	4
■	Connection Panels ........................................................................................	5
■	Infrared Remote Control (All Functions Except Teletext) ..............................	6
■	Infrared Remote Control (Teletext Functions) ...............................................	7
■	Inserting the Batteries in the Remote Control................................................	8
■	Connecting the Aerial (or Cable Television Network)....................................	8
■	Switching Your Television On and Off...........................................................	9
■	Placing Your Television in Standby mode .....................................................	9
■	Plug & Play Feature.......................................................................................	10
■	Viewing the Demonstration............................................................................	11
■	Choosing Your Language..............................................................................	12
SETTING UP THE CHANNELS
■	Storing the Channels Automatically...............................................................	13
■	Storing the Channels Manually......................................................................	14
■	Giving Channels Names................................................................................	16
■	Skipping Unwanted Channels .......................................................................	17
■	Fine tuning Channel Reception .....................................................................	18
■	Sorting the Stored Channels .........................................................................	19
USING THE TELEVISION
■	Changing the Picture Standard .....................................................................	20
■	Adjusting the Picture Settings........................................................................	21
■	Selecting the Picture Format .........................................................................	21
■	Activation/Deactivation the Digital Noise Reduction Feature ........................	22
■	Changing the Sound Standard ......................................................................	23
■	Adjusting the Sound Settings ........................................................................	24
■	Extra Sound Settings.....................................................................................	25
■	Selecting the Sound Mode ............................................................................	26
■	Selecting the Turbo Sound ............................................................................	27
■	Adjusting the Volume.....................................................................................	27
■	Switching the Sound Off Temporarily ............................................................	27
■	Setting the Sleep Timer .................................................................................	28
■	Setting and Displaying the Current Time.......................................................	28
■	Switching the Television On and Off Automatically .......................................	29
■	Setting the Blue Screen Mode.......................................................................	30
■	Activating the Childlock .................................................................................	30

USING THE TELETEXT FUNCTION (depending on the model)

■	Teletext Decoder ...........................................................................................		31
■	Displaying Teletext Information .....................................................................		31
■	Selecting a Specific Teletext Page ................................................................		32
■	Using FLOF to Select a Teletext Page ..........................................................		33
■	Storing Teletext Pages ..................................................................................		33
INFORMATION ON CONNECTIONS AND RECOMMENDATIONS FOR USE
■	Connecting to the AV-1 or 2 Input/Outputs....................................................		34
■	Connecting to the Rear S-VIDEO Input (Option)...........................................		35
■	Connecting to the Rear DVD Input (Option) ..................................................		35
■	Connecting to the RCA Input.........................................................................		36
■	Connecting Headphones ...............................................................................		37
■	Viewing Picture From External Sources	........................................................	37
■	Automatic Degaussing to Remove Colour Patches.......................................		38
■	Trouble Shooting: Before Contacting Service Personnel ..............................		38
Symbols

Press

Important

Note

3

Front Control Panel (depending on the model)

ENG

Buttons and markings are subject to change.

STAND-BY/TIMER

MENU DISPLAY

CHANNEL SELECTION

INDICATOR

VOLUME ADJUSTMENT

REMOTE CONTROL SENSOR

POWER

TV/VIDEO

STAND-BY/TIMER

SELECTION

VOLUME ADJUSTMENT

INDICATOR

POWER

MENU DISPLAY

CHANNEL SELECTION REMOTE CONTROL SENSOR

TV/VIDEO		STAND-BY/TIMER
SELECTION	VOLUME ADJUSTMENT		INDICATOR	POWER
MENU DISPLAY		CHANNEL SELECTION	REMOTE CONTROL SENSOR

4

Connection Panels

This figure shows the Standard Connector-jack panel.		ENG
The actural configuration on your TV may be different,
depending on the model.
Side of TV	Front of TV

RCA AUDIO/VIDEO

INPUT CONNECTORS

HEADPHONE JACK (OPTION)

RCA AUDIO/VIDEO INPUT

CONNECTORS

HEADPHONE JACK (OPTION)

Rear of TV

VIDEO AUDIO

MONITOR

-OUT

(MONO)

VIDEO L-AUDIO-R

MONITOR

-OUT

	INPUT 2
	INPUT 1
INPUT
RCA AUDIO/VIDEO	RCA AUDIO/VIDEO
INPUT/OUTPUT CONNECTORS	INPUT/OUTPUT CONNECTORS
	S-VIDEO CONNECTOR
	(OPTION)
SCART AUDIO/VIDEO
INPUT/OUTPUT CONNECTORS
	DVD INPUT CONNECTORS
	(OPTION)
2	OPTION
1
RGB

5

Infrared Remote Control (All Functions Except Teletext)

ENG	Buttons and markings are subject to change.

POWER

DIRECT CHANNEL SELECTION

ONE/TWO-DIGIT CHANNEL SELECTION

SOUND MENU DISPLAY (OPTION)

TURBO SOUND ON/OFF (OPTION)

TEMPORARY SOUND SWITCHOFF

TUNER/CABLE NETWORK

SELECTION

EXTERNAL INPUT SELECTION

ON-SCREEN DISPLAY

SOUND MODE SELECTION (OPTION)

AUTOMATIC SWITCH-OFF SOUND STANDARD (OPTION)

PICTURE STANDARD

PICTURE SIZE

NEXT CHANNEL

VOLUME DECREASE	VOLUME INCREASE

PREVIOUS CHANNEL

MENU DISPLAY

Operation of remote control may be affected by bright artificial light near to the TV set.

6

Infrared Remote Control (Teletext Functions)

	Buttons and markings are subject to change.	ENG

TELETEXT DISPLAY/MIX

	LIST/FLOF MODE SELECTION
?	TELETEXT REVEAL
TELETEXT HOLD	TELETEXT STORE
	TELETEXT SUB-PAGE

FASTEXT TOPIC SELECTION

TELETEXT SIZE

TELETEXT NEXT PAGE

1

1

TELETEXT PREVIOUS PAGE

PROGRAMME SELECTION BY NAME

7

Inserting the Batteries in the Remote Control

ENG

		S
	S
E
R
P

You must insert or replace the batteries in the remote control when you :

Purchase the television.

Find that the remote control is no longer operating correctly.

1Remove the cover of the remote control by pressing the symbol ( PRESS ) and pulling the cover in the direction of the arrow.

2 Insert batteries, taking care to respect the polarities:

+ on the battery with + on the remote control- on the battery with - on the remote control

3 Replace the cover by pushing it in the direction of the arrow.

		S
	S
E
R
P

Connecting the Aerial (or Cable Television Network)

To view television channels correctly, a signal must be received by the set from one of the following sources:

An outdoor aerial

A cable television network

Plug the aerial or cable network input cable to the 75Ω coaxial socket on the rear of the television.

	Cable
	Television
Rear of TV	Network

8

Switching Your Television On and Off

ENG

The mains lead is attached to the rear of the television.

1 Plug the mains lead into an appropriate socket.

The main voltage is indicated on the rear of the TV set and the frequency is 50 or 60Hz.

2Press the POWER (ON/OFF) button on the front of the television.

Result: The Standby indicator lights up on the front panel.

3Press the POWER button on the remote control to switch the television on.

Result: The programme that you were watching last is reselected automatically.

4To switch your television off, press the POWER (ON/OFF) button again on the front of the television.

Placing Your Television in Standby mode

Your television can be placed in Standby mode, in order to reduce:

Power consumption

Wear of the cathode ray tube

The Standby mode can be useful when you wish to interrupt viewing temporarily (during a meal, for example).

The television is placed automatically in Standby mode when you turn it on.

1Press the POWER button on the remote control.

Result: The screen is turned off and the Standby indicator on the front of the television lights up.

2To switch the screen back on, simply press the POWER button again on the remote control.

Do not leave your television in standby mode for long periods of time (when you are away on holiday, for example). In this case, you should switch it off completely.

9

Plug & Play Feature

ENG

Plug & Play

Ant. Input : Check

				Select		Exit
					Auto store
			Area			: ASIA W/EUROPE
			Search			: -/+

		Select				Adjust	Exit
					Time
			Clock			: -- : -- am
			Timer			: Off

		Select				Enter	Exit
				Function
			Language			: English
			Time				√
			Plug & Play				√
			Blue screen				: Off
			Childlock				√
			Demonstration				√
		Select				Enter	Exit
				Function
			Language			: English
			Time				√
			Plug & Play				√
			Blue screen				: Off
			Childlock				√
			Demonstration				√
		Select				Enter	Exit

When the television is initially powered ON, three basic customer settings proceed automatically and subsequently: setting the language, channel and clock.

1If the television is in Standby mode (red light visible on the television front panel), press the POWER button on the remote control.

Result: The message “Plug & Play” is displayed. It flickers for a little while and then the “Language” menu is automatically displayed.

2Press the ▲ or ▼ button to select required language. Press the MENU button to enter the language, and then the message “Ant. Input : Check” is displayed.

If any language is not selected on the “Language” menu, the “Language” menu will be displayed about 30 seconds later.

3Make sure that the antenna is connected to the TV. And then press the + or – button.

Result: The “Auto store” menu is displayed.

4Select your country by pressing the + or – button. To search the channels, select the “Search” by pressing the ▲ or ▼ button, and then press the + or – button (refer to “Storing the Channels Automatically” on page 13). Press the MENU button to skip.

Result: The “Time” menu is displayed.

5Press the + or – button to move to the hour or minute. Set the hour or minute by pressing the ▲ or ▼ button (refer to “Setting and Displaying the Current Time” on page 28).

6When you have finished, press the MENU button.

Result: The message “ENJOY YOUR WATCHING” is displayed, and then the channel which has been stored will be activated.

7If you want to reset this feature...

1 Press the MENU button.

2 Press the ▲ or ▼ button to select the “Function”, and then press the + or – button.

3Select the “Plug & Play” by pressing the ▲ or ▼ button, and then press the + or – button.

Result: The message “Plug & Play” is displayed.

10

Viewing the Demonstration

To become familiar with the various menus provided by your television, you can view the inbuilt demonstration.

1Press the MENU button.

2Press the ▲ or ▼ button to select the “Function” and press the + or

– button.

3Press the ▲ or ▼ button to select the “Demonstration” and press the + or – button.

Result: Each of the menu options is displayed in turn.

4When you wish to stop the demonstration, press any button on the remote control.

ENG

				Picture
			Mode			œ Custom	√
			Adjust				√
			Digital NR				: Off
		Select				Enter	Exit
				Function
			Language			: English
			Time				√
			Plug & Play				√
			Blue screen				: Off
			Childlock				√
			Demonstration				√
		Select				Enter	Exit
				Function
			Language			: English
			Time				√
			Plug & Play				√
			Blue screen				: Off
			Childlock				√
			Demonstration				√
		Select				Enter	Exit

11

Choosing Your Language

ENG

				Picture
			Mode			œ Custom	√
			Adjust				√
			Digital NR				: Off
		Select				Enter	Exit
				Function
			Language			: English
			Time				√
			Plug & Play				√
			Blue screen				: Off
			Childlock				√
			Demonstration				√
		Select				Enter	Exit
				Function
			Language			: English
			Time				√
			Plug & Play				√
			Blue screen				: Off
			Childlock				√
			Demonstration				√
		Select				Adjust	Exit

When you start using your television for the first time, you must select the language which will be used for displaying menus and indications.

1Press the MENU button.

2Press the ▲ or ▼ button to select the “Function”.

3Press the + or – button to select the “Language”.

4Select a particular language by pressing the ▲ or ▼ button repeatedly.

5When you have finished, press the TV button, or press the MENU button repeatedly to return to normal viewing.

12