OKI MB760, MB770, MB770F, MB770FX, MPS5502MB User Manual

MB760, MB770, MB770f, MB770fx, MPS5502mb,

MPS5502mbf, MPS5502mbfx

Safety, Warranty and Regulatory Information . . . . . . . . . . . . . . . 2 Informations de sécurité, de garantie, et de réglementation . . . 14 Información sobre seguridad, garantía, y regulaciones . . . . . . . 27 Informações sobre segurança, garantia e normativas . . . . . . . . 42

Country/Region • Pays/Région • País/región • País/região

United States and Canada, Etats-Unis et Canada, Estados Unidos y Canadá

English

Safety Information . . . . . . . . . . . . . . . . . . . . . . .2 Warranty Information . . . . . . . . . . . . . . . . . . . . .4 Service and Support . . . . . . . . . . . . . . . . . . . . . .5 Regulatory Information . . . . . . . . . . . . . . . . . . . .7 Material Safety Data Sheet (MSDS) . . . . . . . . . . .9

Français

Informations sur la sécurité. . . . . . . . . . . . . . . 14 Information sur la garantie . . . . . . . . . . . . . . . . 17 Service et soutien . . . . . . . . . . . . . . . . . . . . . . 19 Informations réglementaires . . . . . . . . . . . . . . . 20 Fiche technique santé-sécurité (MSDS) . . . . . . . . 22

Español

Información de Seguridad . . . . . . . . . . . . . . . . . 27 Información sobre la garantía . . . . . . . . . . . . . . 30 Servicio y Apoyo . . . . . . . . . . . . . . . . . . . . . . . 32 Información reglamentaria . . . . . . . . . . . . . . . . 35 Hojas de Información sobre Seguridad de los Materiales (MSDS) . . . . . . . . . . . . . . . . . . . . . 37

Mexico, México

Español

Información de Seguridad . . . . . . . . . . . . . . . . . 27 Información sobre la garantía . . . . . . . . . . . . . . 33 Servicio y Apoyo . . . . . . . . . . . . . . . . . . . . . . . 32 Información reglamentaria . . . . . . . . . . . . . . . . 35 Hojas de Información sobre Seguridad

de los Materiales (MSDS) . . . . . . . . . . . . . . . 37

English

Safety Information . . . . . . . . . . . . . . . . . . . . . . .2 Regulatory Information . . . . . . . . . . . . . . . . . . . .7 Material Safety Data Sheet (MSDS) . . . . . . . . . . .9

America Latina (otro),

Latin America (other)

Español

Información de Seguridad . . . . . . . . . . . . . . . . . 27 Información sobre la garantía . . . . . . . . . . . . . . 34 Servicio y Apoyo . . . . . . . . . . . . . . . . . . . . . . . 32 Información reglamentaria . . . . . . . . . . . . . . . . 35 Hojas de Información sobre Seguridad

de los Materiales (MSDS) . . . . . . . . . . . . . . . . 37

English

Safety Information. . . . . . . . . . . . . . . . . . . . . . . 2 Regulatory Information. . . . . . . . . . . . . . . . . . . . 7 Material Safety Data Sheet (MSDS) . . . . . . . . . . 9

Brasil, Brazil

Português

Informações de segurança . . . . . . . . . . . . . . . . 42 Informações sobre a garantia . . . . . . . . . . . . . . 45 Informações normativas . . . . . . . . . . . . . . . . . . 46 Ficha de Informação de Segurança

do Produto . . . . . . . . . . . . . . . . . . . . . . . . . . 48

English

Safety Information. . . . . . . . . . . . . . . . . . . . . . . 2 Regulatory Information. . . . . . . . . . . . . . . . . . . . 7 Material Safety Data Sheet (MSDS) . . . . . . . . . . . 9

1

Safety, Warranty and Regulatory Information

Safety Information,

120-Volt Models

Your OKI product has been carefully designed to give you years of safe, reliable performance. As with all electrical equipment, there are a few basic precautions you should take to avoid hurting yourself or damaging the product.

•Carefully read the provided setup and operating instructions.

•Save all provided documentation for future reference.

•Read and follow all warning and instruction labels on the product itself.

•Unplug the product before you clean it. Use only a damp cloth; do not use liquid or aerosol cleaners.

•Place your product on a firm, solid surface. If you put it on something unsteady, it may fall and be damaged. If you place it on a soft surface, such as a rug, sofa, or cushion, the vents may be blocked, causing the product to overheat.

•Protect your product from overheating. Make sure no obstructions block the openings of the product. Do not put the product on or near a heat source (such as a radiator or heat register). Keep the product out of direct sunlight.

•Always use this product in a well ventilated area. Allow enough room around the product for adequate ventilation and easy access to the paper trays. If you put the product in any kind of enclosure, make sure the enclosure is well ventilated.

•Do not use your product near water. Do not spill liquid of any kind into it.

•Be certain that your power source matches the rating listed on the back of the product. If you are not sure, check with your dealer or with your local power company.

•Do not connect this product to an uninterruptible power supply (UPS). For further information please contact Oki Data at 1-800-OKI-DATA.

•Your product has a grounded, three-prong plug as a safety feature. This plug only fits into a grounded outlet. If the plug does not fit, the outlet may be an older, non-grounded type. Contact an electrician to have the outlet replaced. Do not use an adapter to defeat the grounding.

•Install the product near an easily accessed power outlet.

•Avoid damaging the power cord. Do not put anything on it or place it where it will be walked on. If the cord becomes damaged or frayed, replace it immediately.

•If you are using an extension cord or power strip with the product, make sure that the total of the amperes required by all the equipment on the extension is less than the extension’s rating. The total ratings of all equipment plugged into the outlet should not exceed 15 amperes.

•Important! A telephone cable using 26 AWG wire or larger must be used with this equipment.

•Do not poke anything into the ventilation slots of the product. You could get an electrical shock or cause hazardous electrical arcing, which could cause a fire.

•Aside from the routine maintenance described in the documentation, do not try to service the product yourself. Removing the cover may expose you to shocks or other hazards.

•Do not make any adjustments other than those outlined in the documentation. You may cause damage that will require extensive repair work. The provided documentation explains how to get your product serviced by qualified Oki Data technicians.

If anything happens that indicates that your product is not working properly or has been damaged, unplug it immediately and follow the procedures in the provided documentation for having your product serviced.

Here are some of the things to look for.

•The power cord or plug is frayed or damaged.

•Liquid has been spilled into the product, or the product has been exposed to water.

•The product has been dropped, or the cabinet is damaged.

•The product does not function normally when you are following the operating instructions.

Additional Safety Informaton for Telecommunications Equipment

When using your telephone equipment, basic safety precautions should always be followed to reduce the risk of fire, electric shock and injury to persons, including the following:

•Do not use this product near water—for example, near a bathtub, washbowl, kitchen sink or laundry tub—in a wet basement, or near a swimming pool.

•Avoid using a telephone (other than a cordless type) during an electrical storm. There may be a remote risk of electric shock from lightning.

•Do not use the telephone to report a gas leak in the vicinity of the leak.

•Use only the power cord and batteries indicated in this manual. Do not dispose of batteries in a fire. They may explode. Check with local codes for possible special disposal instructions.

SAVE THESE INSTRUCTIONS.

2 - English

Safety Information,

220/240-Volt Models

This product has been carefully designed to give years of safe, reliable performance. As with all electrical equipment, however, there are a few basic precautions that should be taken to avoid injury or damage:

Ensure this and all other documentation is both read carefully and retained for future reference.

Ensure all warning and instruction labels on the product are read, understood and followed in order to prevent any risk of injury.

This product may be heavy. Please check the weight of the product and take all necessary precautions to prevent the risk of personal injury.

The product must be placed on a flat solid surface strong enough to support its weight to prevent any risk of injury.

Ensure that there is adequate ventilation all around the product to prevent overheating and any risk of fire.

Keep the product away from direct heat sources such as radiators and out of direct sunlight to prevent any risk of overheating.

The power supply required for this product is 220-240 VAC, 50/60 Hz. Refer to your product's rating label on the machine for full power rating details. Ensure that you have a suitable power supply before connecting the product. If in doubt contact your dealer or check with your local power provider.

Ensure both the product and mains power switches are in the OFF position before connecting the AC power cable.

Do not connect or disconnect the power plug with a wet hand as this may cause electric shock.

Always hold the power plug to connect/disconnect the power cable to/from the mains socket. Unplugging by pulling on the cable can cause fraying and may lead to fire or electric

shock.

This product has an earthed plug as a safety feature and will only connect to an earthed socket. Do not attempt to defeat the earthing or there is a risk of fire or shock.

If using an extension cable or power strip ensure that the total current rating (amperes) of all connected equipment is less than the maximum rating of the extension cable, power strip or wall outlet. If the product is already supplied with a fitted power strip then no additional power strip or extension cable should be used to connect to the mains wall outlet. Otherwise, fire or shock may occur.

Ensure the power cable is routed so as not to be damaged or cause a trip hazard. If the cable becomes frayed or damaged replace it immediately to prevent any risk of shock.

Do not twist, constrict or knot the power cable as this can cause overheating which may lead to fire or electric shock.

Ensure the power socket to which the product is connected is easily accessible at all times and not obstructed.

Use only the power cable supplied. Using a power cable not intended for this product may lead to fire or electric shock.

To avoid risk of fire and electric shock, do not use the power cable supplied with this product for any other electrical equipment.

If you do not connect the power cord or any other cables only as directed in the User's Guide, this may result in a fire.

It is recommended that the machine is switched off prior to opening covers; otherwise there is a risk of electric shock.

When the product cover is open, do not touch the fuser unit or print head as you may receive burns. Allow it to cool before touching.

If the product casing gets extremely hot or smoke, unusual smells or abnormal noises are emitted from the product, there is a risk of fire. Unplug the mains connector and contact your dealer.

If the product has been knocked over or damaged, there is a risk of electric shock, fire and/or injury. Unplug the mains connector and contact your dealer.

If any liquid (for example water) is allowed to enter the product, there is a risk of fire. Unplug the mains connector and contact your dealer.

Do not place containers containing liquid on the product as electric shock, fire and/or injuries may occur.

If any foreign objects (for example clips) are allowed to enter the product, there is a risk of electric shock, fire and/ or injury. Unplug the mains connector before removing the

object.

Do not introduce foreign objects into the ventilation holes or operate this product with any covers open or doors removed as electric shock, fire and/or injuries may occur.

Do not use an extremely flammable spray near the product as the product contains high temperature parts that may cause a fire.

Switch the product off before cleaning to prevent any risk of injury. Clean using a damp cloth. Do not use liquid or aerosol cleaners.

Ensure loose clothing and hair is kept clear of moving parts when the product is in operation to prevent possible risk of injury.

Do not carry out any operations on the product that are not specified in the User's Guide. This may result in electric shock, fire and/or injury.

Do not touch the battery if one is fitted to the product. There is a risk of explosion if the battery is replaced by an incorrect type. The product battery should not require replacement during the life of the product.

Do not throw toner cartridges or image drum cartridges into a fire as you may receive burns from a dust explosion.

After installing additional memory, hard disk drive, or any other internally fitted option, any covers removed or doors opened must be closed or replaced and secured to prevent risk of fire.

The acoustic noise of this product is less than 70 dB (A) as measured in accordance with EN ISO 7779.

The operating condition range for your product is: 15.6 to 32.2°C and 20 to 80% RH. Operation of the product outside this range could result in damage to the product.

If a scanner, finisher etc. is fitted, exercise care when moving these items so as to avoid risk of entrapment or personal injury.

If the product is installed on a cabinet or high capacity feeder, ensure wheel locks are applied once placed in final position for use, to prevent risk of movement or injury.

3 - English

TIPPING SAFETY

To avoid safety risks, you must adhere to one of the following recommended configurations.

When using the Caster Unit or the Large Capacity Feeder, you must also use the Anti-tip Feet for stability.

For Additional Trays, Spacers, or LCF you must also use the supplied Joint Options to join them together to ensure safe operation.

Fix the tray with the joint-option and tighten the screws with the screw-knob.

Tighten them on both sides.

4 - English

Limited Warranty, US and

Canada

U.S. and Canada only

Oki Data Americas, Inc. (Oki Data) warrants this MB760/ MB770/MB770f/MB770fx/MPS5502mb/MPS5502mbf/ MPS5502mbfx (hereinafter "the Product") to be free from defects in material and workmanship and will remedy any such defect according to, the terms of this Limited Warranty.

Oki Data will repair or at its option, replace, with the same or its functional equivalent, at no charge, any defective component(s) of the Product for one (1) year from the date of purchase except for the printhead (LED imaging array), which is warranted for a period of five (5) years from the date of purchase.

This Limited Warranty only extends to the original purchaser of the warranted item. This Limited Warranty is not transferable. This Limited Warranty does not extend to consumable items or supplies, such as toner cartridges, image drums, ribbon cartridges, fuses, etc.

On-Site Repair

Note: On-Site Repair is available in the United States and Canada only. On-Site Repair does not include the replacement or repair of Product consumables or supplies.

Oki Data will, for a period of one (1) year from the date of original purchase, repair or replace (at Oki Data's option) on-site at the original purchaser's facility and without charge, any defective component(s) of the Product provided that the warranty service is performed by an Oki Data authorized service provider. The printheads (LED imaging arrays) have a 5-year parts only warranty from date of original purchase. Following the first year of warranty coverage, the printheads will be replaced by an authorized Oki Data service provider at Oki Data's then current labor rates.

To make request or claim for service under the one (1) year parts and labor coverage of this Limited Warranty, contact your Oki Data Authorized Dealer, authorized third-party service provider, or Oki Data. Oki Data reserves the right to use new and/or refurbished parts for the warranty repair.

As a condition of this Limited Warranty, requests for On-Site Repair must include the name and phone number of a fully competent and responsible adult with the authority to consent to the entry of the servicing technician to the premises where the Product is located, and who will remain with the servicing technician while the service work is performed. Any and all dangerous conditions must be removed from the site prior to and throughout the time a service technician is present. The service technician may refrain from entering the premises or continuing to provide services at any site, if in the servicing technician's reasonable judgement the site poses a risk of physical harm or danger. If warranty services cannot be performed or completed due to any of the foregoing reasons the On-Site service option is null and void and the Product must be returned to an authorized Oki Data service location for warranty repair service.

To make a request or claim for service under this Limited Warranty, contact your local Oki Data authorized service center, Oki Data at 1-800-654-3282 (1-800-OKI-DATA), or www.okiprintingsolutions.com.

Once the one (1) year on-site period is over, the original purchaser must return the Product, shipping prepaid, in the original shipping container or equivalent to Oki Data or an authorized Oki Data service center and assume the risk of loss or damage in transit.

A written receipt for the Product, showing the date of purchase, dealer's name, and both the model and serial numbers of this Product must accompany any request or claim for work to be performed under this Limited Warranty.

This Limited Warranty shall not apply to normal wear and tear and shall not apply if the Product has been damaged due to abuse, misuse, misapplication, accident, improper storage, or installation, an unsuitable physical operating environment, or as a result of service or modification by any other than an authorized Oki Data service center.

THERE ARE NO EXPRESS WARRANTIES OTHER THAN THOSE ON THE FACE HEREOF AND DESCRIBED ABOVE. NO WARRANTIES WHETHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, SHALL EXTEND BEYOND THE RESPECTIVE WARRANTY PERIODS DESCRIBED ABOVE.

Some states do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you.

IN NO EVENT SHALL OKI DATA OR ITS AFFILIATES BE LIABLE TO A PURCHASER OR ANY OTHER PERSON FOR SPECIAL, COLLATERAL, PUNITIVE, INCIDENTAL OR CONSEQUENTIAL DAMAGES INCLUDING LOST PROFITS, BUSINESS REVENUE, GOODWILL OR ANTICIPATED SAVINGS IN CONNECTION WITH OR ARISING OUT OF THE PURCHASE OR USE OF THE OKI DATA PRODUCT, WHETHER ARISING IN CONTRACT OR IN TORT, WHETHER OR NOT CUSTOMER SHALL HAVE INFORMED OKI DATA OF THE POSSIBILITY OR LIKELIHOOD OF ANY SUCH DAMAGES.

Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above exclusion may not apply to you.

ADDITIONAL WARRANTY DISCLAIMERS FOR ALL PURCHASERS EXCEPT CONSUMERS:

WHEN ANY OKI DATA PRODUCT SHALL BE PURCHASED BY ANY PERSON SUCH THAT THE OKI DATA PRODUCT IS NOT A "CONSUMER GOOD" (AS DEFINED IN THE UNIFORM COMMERCIAL CODE ADOPTED IN THE STATE OF PURCHASE OR IN OTHER APPLICABLE LAW), OKI DATA EXPRESSLY DISCLAIMS ALL IMPLIED WARRANTIES, INCLUDING WITHOUT LIMITATION THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.

Additional information on obtaining service under this Limited Warranty in the U.S. and Canada is available by contacting the Oki Data dealer from whom the Product was purchased, by contacting Oki Data directly at 1-800- 654-3282 (1-800-OKI-DATA), or by contacting one of the

5 - English

service locations listed below. Spanish Only: call 1-856-222-5276. Canada Only: call 1-905-238-4275.

United States	Canada
Oki Data Americas, Inc.	Oki Data Americas, Inc.
2000 Bishops Gate Blvd.	4140B Sladeview Crescent Unit
Mt. Laurel, NJ 08054	7 & 8
Phone: [phone]	Mississauga, Ontario
Fax: [phone]	Canada L5L 6A1
	Phone: [phone]
	Fax: [phone]

This Limited Warranty applies to this Product. However, the procedure for obtaining service may vary outside the continental United States. Contact your Oki Data dealer for such warranty service information.

This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.

Service and Support,

US and Canada

U.S. and Canada only

Oki Data is firmly committed to the satisfaction of our customers. If you have a problem that your customer documentation cannot solve, contact the listed sources for service or support.

Oki Data Authorized Service Providers

For the most comprehensive, up-to-date listing of Oki Data authorized Service Centers in the United States and Canada:

•In the U.S. go to www.okiprintingsolutions.com.

•In Canada and the U.S., call 1-800-654-3282 (1-800-OKI-DATA).

Oki Data Contact Locations

United States	Canada
Oki Data Americas, Inc.	Oki Data Americas, Inc.
2000 Bishops Gate Blvd.	4140B Sladeview Crescent Unit
Mt. Laurel, NJ 08054	7 & 8
Phone: [phone]	Mississauga, Ontario
Fax: [phone]	Canada L5L 6A1
	Phone: [phone]
	Fax: [phone]

Sales and Service Dealers

Consult the store location where you purchased your machine, or contact Oki Data for the location of the nearest Authorized Oki Data Service Dealer.

•Prices and minimum charges may vary.

•Proof of purchase is required for warranty work. Be sure to retain your purchase documents.

Automated Services for Your Convenience

Quick Referrals

To get quick referrals for a local Sales and Service Authorized Reseller, including products, parts and consumable supplies, contact us at any time:

•1-800-654-3282 (1-800-OKI-DATA)

•www.okiprintingsolutions.com

Your Own Personal Solutions Center

You can easily create your own Personal Solutions Center providing up-to-the-minute Oki information specifically for your product, including:

•Product news

•Manuals

•Drivers and utilities

•Material Safety Data Sheets

•Searchable knowledge base

•and much more!

Just take a few minutes setting it up once, then you can check your Personal Solutions Center for the latest information at any time.

Get started today by visiting http://MY.OKIDATA.com.

Customer Support Representatives

1-800-654-3282 (1-800-OKI-DATA)

Customer Support Representatives are available 24 hours a day, 7 days a week. Please have the model number and serial number for your machine handy. Be sure that you are calling from a telephone close to your machine so you can describe your problem accurately and follow up on the suggestions of the Customer Support Representative right while you are on the phone. Our Customer Support Representatives are trained on all current OKI products. They can answer your questions regarding:

•Locations of sales and service dealers

•Installation of your machine

•Usage/normal maintenance of your machine

•Error message interpretation/solutions

•Parts and supplies identification

•Consumer relations

Note: Customer Support Representatives are not trained to provide assistance with the use of commercial software packages. Please consult your software user’s manual for times and availability of their support.

6 - English

Regulatory Information

ENERGY STAR®

As an ENERGY STAR Partner, Oki Data has determined that this product meets the ENERGY STAR guidelines for energy efficiency.

Federal Communications Commission (FCC)

Declaration of Conformity

Product Name	Model Name
MB760, 120V	N22400A
MB770, 120V	N22400A
MPS5502mb, 120V	N22400A
MB770f, 120V	N22401A
MB770fx, 120V	N22401A
MPS5502mbf, 120V	N22401A
MPS5502mbfx, 120V	N22401A
MB760, 230V	N22400B
MB770, 230V	N22400B
MPS5502mb, 230V	N22400B
MB770f, 230V	N22401B
MB770fx, 230V	N22401B
MPS5502mbf, 230V	N22401B
MPS5502mbfx, 230V	N22401B

1.Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

2.Responsible Party

Oki Data Americas, Inc. 2000 Bishops Gate Boulevard Mt. Laurel, NJ 08054-4620

1-800-654-3282 (1-800-OKI-DATA)

FCC Radio Frequency Interference Statement

WARNING: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a commercial environment. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at their own expense.

Note: It is the responsibility of the user to obtain the required shielded cable in order to ensure compliance of this equipment with FCC regulations.

Changes or modifications not expressly approved by Oki Data may void your authority to operate this device.

FCC Administrative Council for Terminal Attachment Requirements for End Users

This device has been granted a registration number by the Administrative Council for Terminal Attachment (ACTA), under Part 68 and ACTA rules and regulations for direct connection to the telephone lines. In order to comply with these FCC rules, the following instructions must be carefully read and applicable portions followed completely.

1.This equipment complies with Part 68 of FCC rules and the requirements adopted by the ACTA. On the back of the equipment is a label that contains, among other information, a product identifier in the format US:AAAEQ##TXXXX. If requested, this inf

2.The following USOC jacks may be used with this equipment: RJ11C.

3.A plug and jack used to connect this equipment to the premises wiring and telephone network must comply with the applicable FCC Part 68 rules and requirements adopted by the ACTA. A compliant telephone cord and modular plug is provided with this product. It is designed to be connected to a compatible modular jack that is also compliant. See installation instructions for details.

4.The REN is used to determine the quantity of devices which may be connected to the telephone line. Excessive RENs on the telephone line may result in the devices not ringing in response to an incoming call. In most, but not all areas, the sum of the RENs should not exceed five (5.0). To be certain of the number of devices that may be connected to the line, as determined by the total RENs, contact the local telephone company. For products approved after July 23, 2001, the REN for this product is part of the product identifier that has the format US:AAAEQ##TXXXX. The digits represented by ## are the REN without a decimal point (e.g., 03 is a REN of 0.3). For earlier products, the REN is separately shown on the label.

5.If the equipment, MB760/MB770/MB770f/MB770fx/ MPS5502mb/MPS5502mbf/MPS5502mbfx, causes harm to the telephone network, the telephone company will notify you in advance that temporary discontinuance of service may be required. But if advance notice isn’t practical, the telephone company will notify the customer as soon as possible. Also, you will be advised of your right to file a complaint with the FCC if you believe it is necessary.

6.The telephone company may make changes in its facilities, equipment, operations, or procedures that could affect the operation of the equipment. If this happens, the telephone company will provide advance notice in order for you to make the necessary modifications to maintain uninterrupted service.

7.If trouble is experienced with this equipment (MB760/ MB770/MB770f/MB770fx/MPS5502mb/MPS5502mbf/ MPS5502mbfx), please contact the following for repair and/or warranty information:

Oki Data Americas, Inc. 2000 Bishops Gate Blvd.

Mount Laurel, N.J. 08054-4620 Telephone:[phone] or (800)-OKIDATA (800-654-3282)

7 - English

If the equipment is causing harm to the telephone network, the telephone company may request that you disconnect the equipment until the problem is resolved.

8.This equipment contains no user serviceable parts. Please contact Oki Data for service.

9.This equipment cannot be used on public coin service provided by the telephone company. Connection to Party Line Service is subject to state tariffs. Contact your state Public Utility Commission, Public Service Commission, or Corporate Commission for information.

10.If your home has specially wired alarm equipment connected to the telephone line, ensure the installation of this MB760/MB770/MB770f/MB770fx/MPS5502mb/ MPS5502mbf/MPS5502mbfx does not disable your alarm equipment. If you have questions about what will disable alarm equipment, consult your telephone company or a qualified installer.

FCC Telephone Consumer Protection Act

The Telephone Consumer Protection Act of 1991 makes it unlawful for any person to use a computer or other electronic device, including FAX machines, to send any message unless such message clearly contains in a margin at the top or bottom of each transmitted page or on the first page of the transmission, the date and time it is sent and an identification of the business or other entity, or other individual sending the message, and the telephone number of the sending machine or such business, other entity, or individual. (The telehone number provided may not be a 900 number or any other number for which charges exceed local or long-distance transmission charges.)

To comply with this law, you must enter the following information in your fax unit:

•Date and time: see “Changing the Date and Time” under Setting Your Terminal in the User’s Guide for instructions on doing this.

Name and telephone number which identify the source of your fax transmission: see Your fax number/ your name under Setting Your Terminal in the User’s Guide for instructions on doing this.

California Requirement

Perchlorate Warning Applicable to Lithium Batteries Sold and/or Distributed in California

Perchlorate Material: special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate.

Industry Canada (IC) Requirements for End Users

This product meets the applicable Industry Canada technical specifications.

The Ringer Equivalence Number is an indication of the maximum number of devices allowed to be connected to a telephone interface. The termination on an interface may consist of any combination of devices subject only to the requirement that the sum of the RENs of all the devices does not exceed five.

Industry Canada (IC) Radio Interference Statements

This Oki Data apparatus complies with the Class A limits for radio interference as specified in the IC Radio Interference Regulations.

European Union Council of the European Communities Statements of Conformance for 220/240-Volt Models

Electromagnetic Conformance

This product complies with the requirements of the Council Directive 2004/108/EC on the approximation of the laws of the member states relating to electromagnetic compatibility.

Safety Conformance

This product is in conformity with Directive 2006/95/EC on the harmonization of the laws of Member States relating to electrical equipment designed for use within certain voltage limits.

8 - English

Material Safety Data Sheet

#58411601

Black Toner: P/N 45460508, 45460509, 45460510, 45460501

1. Identification of the substance/preparation and of the company/undertaking

For more information, contact OKI Data at: 2000 Bishops Gate Boulevard, Mount Laurel, NJ 08054-4620.

Emergency Information: call 1-800-654-3282; US and Canada only.

2. Hazards identification

Emergency Overview

The product contains no substances which, in the form utilized and at their given concentrations, are considered to be hazardous to health.

Color	Appearance		Physical	Odor
			State
Black	powder		Solid	Faint
Potential Health Effects
Principal Routes of		Inhalation
Exposure
Acute toxicity
Eyes		No known effect.
Skin		No known effect.
Inhalation		No known effect.
Ingestion		No known effect.
Chronic Effects
Chronic toxicity		No known effects under normal
		use conditions. Repeated or
		prolonged inhalation may cause
		irritation of the respiratory tract
		as can occur with the inhalation
		of any non-toxic dust. Minimum
		respiratory or eye irritation may
		occur as with exposure to large
		amounts of any non-toxic dust.
Main Symptoms		Overexposure may cause: mild
		respiratory irritation similar to
		nuisance dust.
Aggravated Medical		None under normal use
Conditions		conditions.
Environmental		See Section 12 for additional
hazard		Ecological Information.
Risk Phrase		None required.

3. Composition/information on ingredients

Chemical Name	CAS No.	Weight %
Polymer	292629-36-8	70-90
Wax	Trade Secret	5-15
Carbon Black	1333-86-4	1-5
Additive	Trade Secret	1-5

4. First aid measures

General advice	For external use only. When
	symptoms persist or in all cases
	of doubt seek medical advice.
	Show this material safety data
	sheet to the doctor in
	attendance.
Eye contact	Immediately flush with plenty of
	water. After initial flushing,
	remove any contact lenses and
	continue flushing for at least 15
	minutes.
Skin contact	Wash skin with soap and water.
Inhalation	Move to fresh air.
Ingestion	Rinse mouth with water and
	afterwards drink plenty of water
	or milk.
Notes to physician	Treat symptomatically.
Protection of First-	No special protective equipment
aiders	required.

5. Fire-fighting measures

Flammable Properties	Not flammable. Will not readily
	ignite.
Flash point	Not applicable.
Suitable Extinguishing	Use water spray or fog; do not
Media	use straight streams, foam.
Unsuitable	Do not use a solid water stream
Extinguishing Media	as it may scatter and spread fire.
Hazardous Combustion	Hazardous decomposition
Products	products due to incomplete
	combustion. Carbon oxides,
	Nitrogen oxides (NOx).

Explosion Data
Sensitivity to	Not impact sensitive.
Mechanical Impact
Sensitivity to Static	Fine dust dispersed in air, in
Discharge	sufficient concentrations, and in
	the presence of an ignition source
	is a potential dust explosion
	hazard.

Specific hazards arising from the chemical

Fine dust dispersed in air, in sufficient concentrations, and in the presence of an ignition source is a potential dust explosion hazard.

Protective Equipment and Precautions for Firefighters

In the event of fire and/or explosion do not breathe fumes. Wear fire/flame resistant/retardant clothing. Use self-contained pressuredemand breathing apparatus if needed to prevent exposure to smoke or airborne toxins.

9 - English

NFPA704
Consumer	Health	Flammability	Stability	Special
use	Hazard			Hazard
	0	1	0	None
Bulk	Health	Flammability	Stability	Special
Packaging	Hazard			Hazard
	0	3	0	None

6. Accidental release measures

Personal precautions	Avoid breathing dust.
Environmental	No special environmental
Precautions	precautions required.
Methods for	Prevent dust cloud.
Containment
Methods for cleaning	Prevent dust cloud. Sweep up or
up	vacuum up spillage and collect in
	suitable container for disposal.
	Use non-sparking tools and
	equipment.
Other information	See Section 12 for additional
	information.

7. Handling and storage

Advice on safe	Handle in accordance with good
handling	industrial hygiene and safety
	practice.
	Prevent dust cloud.
Technical measures/	Keep container tightly closed in a
Storage conditions	dry and well-ventilated place.
	Store at room temperature.
Hygiene measures	None under normal use
	conditions.
Industrial User	Do not eat, drink or smoke when
	using this product.
	Wash hands before eating,
	drinking, chewing gum, using
	tobacco, or using toilet.
	Wash hands before breaks and at
	the end of workday.
	Provide regular cleaning of
	equipment, work area and
	clothing.

8. Exposure controls/personal protection

Exposure Guidelines

Product Information
ACGIH TLV TWA	10 mg/m3 (inhalable particles)
ACGIH TLV TWA	3 mg/m3 (respirable particles)
OSHA PEL TWA	15 mg/m3 (total dust)
OSHA PEL TWA	5 mg/m3 (respirable dust)

Other information

The results obtained from Chronic Toner Inhalation Study demonstrated no lung changes in rats for the lowest (1mg/m3) exposure level (the level most relevant to potential human exposure). A very slight degree of fibrosis was noted in 25% of animals at the middle (4mg/m3) exposure level, while a slight degree of fibrosis was noted in all the animals at the highest (16mg/m3) exposure level. These findings are attributed to "lung overloading", a generic response to excessive amounts of any dust retained in the lungs for a prolonged period. This study was conducted using a special test toner to comply with an EPA testing protocol.

Biological standards

This product, as supplied, does not contain any hazardous materials with biological limits established by the region specific regulatory bodies.

Occupational Exposure Controls

Engineering Measures	None under normal use
	conditions.
Industrial use	Avoid dust formation.
	Ensure all equipment is
	electrically grounded before
	beginning transfer operations.
	Provide appropriate exhaust
	ventilation at places where dust
	is formed.
Personal Protective Equipment
Consumer use	These recommendations apply to
	the product as supplied.
Respiratory	No special protective equipment
protection	required.
Eye/Face Protection	No special protective equipment
	required.
Skin and body	No special protective equipment
protection	required.
Hand Protection	No special protective equipment
	required.
Industrial use	In case of insufficient ventilation:
	Wear	protective	eyewear
	(goggles).
	Effective dust mask.

9. Physical and chemical properties

Appearance	Powder
Odor	Faint
Odor Threshold	Not applicable
Physical State	Solid
pH	Not applicable
Color	Black
Flash Point	Not applicable
Boiling Point/Range	Not applicable
Softening Point	49-60°C / 120-140°F
Autoignition	Not applicable
temperature
Flammability Limits in	Not applicable
Air

10 - English

Explosive properties	Fine dust dispersed in air, in
	sufficient concentrations, and in
	the presence of an ignition source
	is a potential dust explosion
	hazard.
Vapor pressure	Not applicable
Vapor density	Not applicable
Water Solubility	Negligible
Viscosity	Not applicable
Partition coefficient	Not applicable
Evaporation Rate	Not applicable
Melting point/range	Not determined
Freezing Point	Not applicable
Specific Gravity	Not applicable

10. Stability and reactivity

Reactivity	No dangerous reaction known
	under conditions of normal use.
Stability	Stable under normal conditions.
Incompatible products	None.
Conditions to Avoid	Prevent dust cloud. Fine dust
	dispersed in air, in sufficient
	concentrations, an ignition
	source is and in the presence of a
	potential dust explosion hazard.
Hazardous	None under normal use.
Decomposition
Products
Hazardous	Hazardous polymerization does
Polymerization	not occur.
Hazardous Reactions	None under normal processing.

11. Toxicological information

The toxicity data noted below is based on the test result of similar reprographic materials.

Acute toxicity

Product Information
Irritation	No skin irritation. No eye
	irritation.
LD50 Oral:	> 5g/kg (rat)
LD50 Dermal:	> 5g/kg (rabbit)
LC50 Inhalation:	> 5mg/L (rat, 4 hr)
Eyes	No known effect
Skin	No known effect
Inhalation	No known effect
Ingestion	No known effect
Chronic toxicity
Product Information

	Chronic Effects	No known effects under normal
		use conditions. Repeated or
		prolonged inhalation may cause
		irritation of the respiratory tract
		as can occur with the inhalation
		of any nontoxic dust. Minimum
		respiratory or eye irritation may
		occur as with exposure to large
		amounts of any non-toxic dust.
	Main symptoms	Overexposure may cause: mild
		respiratory irritation similar to
		nuisance dust.
	Aggravated Medical	None under normal use
	Condition	conditions.
	Carcinogenicity	See "Other Information" in this
		section.
	Chemical Name		IARC		NTP
	Carbon Black		2B
Other Toxic Effects
	Product Information
	Sensitization	No sensitization responses were
		observed.
	Mutagenic Effects	Not mutagenic in AMES Test.
	Target Organ Effects	None known.
	Aspiration Hazard	Not applicable.
	Other adverse effects	None known.

Other information

The IARC (International Agency for Research on Cancer) has listed carbon black as "possibly carcinogenic to humans".

The classification is based on studies evaluating pure, "free" carbon black. In contrast, toner is a formulation composed of specially prepared polymer and a small amount of carbon black (or other pigment).

In the process of making toner, the small amount of carbon black becomes encapsulated within a matrix. Regarding extensive testing of toner, including a chronic bioassay (test for potential carcinogenicity), exposure to toner did not produce evidence of cancer in exposed animals. The results were submitted to regulatory agencies and published extensively.

12. Ecological information

Ecotoxicity

The environmental impact of this product has not been fully investigated. However, this preparation is not expected to present significant adverse environmental effects.

11 - English

13. Disposal considerations

Waste Disposal	This material, as supplied, is not a
Methods	hazardous waste according to Federal
	regulations(40 CFR 261). This material
	could become a hazardous waste if it is
	mixed with or otherwise comes in
	contact with a hazardous waste, if
	chemical additions are made to this
	material, or if the material is processed
	or otherwise altered. Consult 40 CFR
	261 to determine whether the altered
	material is a hazardous waste. Consult
	the appropriate state, regional, or local
	regulations for additional
Contaminated	Dispose of in accordance with local
packaging	regulations.

14. Transport information

Note	This material is not subject to regulation
	as a hazardous material for shipping.

15. Regulatory information

International Inventories

TSCA	Complies
DSL/NDSL	Complies

U.S. Federal Regulations SARA 313

Section 313 of Title of the Superfund Amendments and Reauthorization Act of 1986(SARA). This product does not contain any chemicals which are subject to the reporting requirements of the Act and Title 40 of the Code of Federal Regulations, Part 372.

SARA 311/312 Hazard Categories

Acute Health Hazard	No
Chronic Health Hazard	No
Fire Hazard	No
Sudden Release of	No
Pressure Hazard
Reactive Hazard	No

Clean Water Act

This product is not regulated as a pollutant pursuant to the Clean Water Act(40 CFR 122.21 and 40 CFR 122.42).

Clean Air Act, Section 112 Hazardous Air Pollutants (HAPs) (see 40 CFR 61)

This product is not regulated as a hazardous air pollutant (HAPS) under Section 112 of the Clean Air Act Amendments of 1990.

CERCLA

This material, as supplied, does not contain any substances regulated as hazardous substances under the Comprehensive Environmental Response Compensation and Liability Act (CERCLA) (40CFR 302) or the Superfund Amendments and Reauthorization Act (SARA) (40 CFR 355). There may be specific reporting requirements at the local, regional, or state level pertaining to releases of this material.

TSCA

TSCA 12b does not apply to this product.

U.S. State Regulations California Proposition 65

Carbon black is regulated under California Proposition 65 only if in the form of "airborne, unbound particles of respirable size". Toner products do not contain carbon black in the form of "airborne, unbound particles of respirable size". Therefore, the requirements of Proposition 65 do not apply to this product.

Chemical Name	CAS-No	California Prop.65
Carbon Black	1333-86-4	Carcinogen

U.S. State Right-to-Know Regulations

Although this product contains substances included in some U.S.State Right-to-Know regulations, the particles are bound in a unique matrix and, therefore, the product does not pose any specific hazard.

Canada

This product has been classified in accordance with the hazard criteria of the Controlled Products Regulations (CPR) and the MSDS contains all the information required by the CPR.

WHMIS Hazard Class

Not subject to WHMIS classification.

16. Other information

Disclaimer

The information provided on this MSDS is correct to the best of our knowledge, information and belief at the date of its publication. The information given is designed only as a guide for safe handling, use, processing, storage, transportation, disposal and release and is not to be considered as a warranty or quality specification. The information relates only to the specific material designated and may not be valid for such material used in combination with any other material or in any process, unless specified in the text.

12 - English

17. Preparation Date of MSDS

Date: March 29, 2013

Prepared by:

OKI Data Americas, Inc. Engineering Services Department 2000 Bishops Gate Blvd.

Mt. Laurel, NJ 08054-4620 Tel: [phone]

Fax: [phone] http://www.okiprintingsolutions.com my.okidata.com

13 - English

Informations de sécurité, de garantie, et de réglementation

Informations sur la sécurité, Modèles de 120 volts

Votre produit OKI a été conçue avec soin pour vous fournir des années de rendement sûr et fiable. Comme pour tout matériel électrique, un certain nombre de précautions de base doivent être observées pour vous protéger de toute blessure ou éviter tout dommage à le produit.

•Lisez attentivement les directives d'installation et d'utilisation fournies.

•Conservez tous les documents pour fins de référence future.

•Lisez et observez les avertissements et directives des étiquettes apposés sur le produit.

•Débranchez le produit avant de la nettoyer. Utilisez uniquement un chiffon humide; n'utilisez pas de nettoyants liquides ou en aérosol.

•Placez le produit sur une surface stable et solide. Sur une surface instable, le produit peut tomber et être endommagée. Évitez toute surchauffe de le produit. Ne la placez pas sur une surface souple, comme une couverture, un divan ou un coussin. Les aérateurs pourraient être obstrués et provoquer une surchauffe de le produit.

•Protégez le produit contre la surchauffe. Vérifiez qu'aucun aérateur n'est obstrué. Ne placez pas le produit sur une source de chaleur (p. ex., radiateur ou grille de chauffage) ou à proximité de celle ci. Protégez le produit contre les rayons du soleil.

•Utilisez toujours le produit dans un endroit bien ventilé. Prévoyez assez d'espace autour de le produit pour assurer une ventilation adéquate et un accès facile aux bacs à papier. Si vous placez le produit dans une armoire d'une quelconque nature, assurez-vous qu'elle est bien ventilée.

•N'utilisez pas le produit à proximité d'un point d'eau. Évitez de renverser quelque liquide que ce soit sur le produit.

•Assurez-vous que la source d'alimentation correspond aux exigences indiquées à l'arrière de le produit. En cas de doute, communiquez avec votre détaillant ou fournisseur d'électricité.

•Ne branchez pas ce produit dans un système d'alimentation sans coupure. Pour plus d'information, contactez Oki Data au 1 800 OKI-DATA.

•Pour des raisons de sécurité, le produit possède une prise à trois broches de mise à la terre. Elle ne s'adapte qu'à une prise murale reliée à la terre. Si vous ne pouvez pas la brancher, votre prise de courant est sans doute un ancien modèle sans prise de terre. Communiquez avec un électricien pour la remplacer par une prise mise à la terre. N'utilisez pas d'adaptateur pour contourner la mise à la terre.

•Le produit doit être installée à proximité d'une prise de courant aisément accessible.

•Évitez d’endommager le cordon d’alimentation. Évitez de posez quoi que ce soit sur le cordon d'alimentation ou de

le placer dans une zone de passage. Si le câble est endommagé ou effiloché, remplacez-le immédiatement.

•Si vous utilisez une rallonge électrique ou une barre d'alimentation avec le produit, assurez-vous que l'ampérage nécessaire à l'ensemble de l'équipement relié est inférieur à l'ampérage maximum pris en charge par la rallonge. L'ampérage maximum de tout équipement branché sur une seule ligne électrique ne doit généralement pas dépasser 15 ampères.

•Importante! Un câble téléphonique comportant des fils de calibre 26 AWG ou plus gros doit être utilisé avec cet équipement.

•N'enfoncez aucun objet dans les fentes de ventilation situées sur les côtés de ll produit, au risque d’être électrocuté ou de provoquer un incendie.

•À l'exception de l'entretien de routine décrit dans la documentation, n'effectuez aucune réparation sur le produit. L'ouverture du capot peut vous exposer à des risques d'électrocution ou autres.

•N'effectuez aucun réglage autre que ceux indiqués dans la documentation. Vous pourriez provoquer des dommages à l'appareil nécessitant de lourdes réparations. La documentation fournie contient les informations requises pour faire réparer votre produit par des techniciens qualifiés Oki Data.

Si vous constatez le moindre signe indiquant le fonctionnement inadéquat de le produit ou que celle-ci a été endommagée, débranchez-la immédiatement et observez ensuite la procédure décrite dans la documentation fournie pour faire réparer le produit.

Vérifiez notamment les éléments suivants :

•Le câble d'alimentation est endommagé ou effiloché.

•Du liquide a été renversé dans le produit, ou le produit a été en contact avec de l'eau.

•Le produit est tombée ou son boîtier a été endommagé.

•Le produit ne fonctionne pas normalement après avoir suivi les directives d’utilisation.

Information additionnelle sur la sécurité pour l'équipement de télécommunications

Lors de l'utilisation de votre équipement téléphonique, prenez les précautions de sécurité nécessaires pour réduire les risques d'incendie, d'électrocution et de blessures, incluant les suivantes :

•N'utilisez pas ce produit près de l'eau, par exemple près d'une baignoire, d'un évier ou d'une cuve de lessive, dans un sous-sol humide ou près d'une piscine.

•Évitez d'utiliser un téléphone (autre qu'un modèle sans fil) durant un orage. Il y a un faible risque d'électrocution dû à la foudre.

•N'utilisez pas le téléphone pour signaler une fuite de gaz à proximité de la fuite.

•Utilisez seulement le fil d'alimentation et les piles indiqués dans ce manuel. Ne jetez pas les piles au feu car elles pourraient exploser. Vérifiez les règlements locaux pour savoir s'il y a des instructions spéciales pour l'élimination.

CONSERVEZ CES INSTRUCTIONS.

14 - Français

Informations sur la sécurité, Modèles de 220/240 volts

Ce produit a été conçu avec soin afin de vous garantir des performances sûres et fiables pendant de nombreuses années. Cependant, comme pour tout équipement électrique, vous devez prendre quelques précautions élémentaires afin d'éviter blessures et dommages :

Assurez-vous que ce document ainsi que toute autre documentation a été lu avec attention et est conservé pour servir ultérieurement de référence.

Assurez-vous que toutes les étiquettes d'avertissement et d'instructions sur le produit sont lues, comprises et suivies pour éviter tout risque de blessures.

Ce produit peut être lourd. Vérifiez son poids et prenez toutes les précautions nécessaires pour éviter tout risque de blessure.

Le produit doit être placé sur une surface plane et stable, assez solide pour supporter son poids et éviter tout risque de blessures.

Assurez-vous que la ventilation autour de du produit est suffisante pour éviter une surchauffe et tout risque d'incendie.

Tenez le produit à l'écart des sources de chaleur, telles que les radiateurs, et à l'abri d'une lumière directe du soleil pour éviter tout risque de surchauffe.

L'alimentation électrique requise par ce produit est 220240 V c.a., 50/60 Hz. Reportez-vous à l'étiquette signalétique de votre machine pour connaître tous les détails. Vérifiez que votre source d'alimentation est appropriée avant de brancher le produit. En cas de doute, contactez votre revendeur ou demandez conseil à votre fournisseur local d'électricité

Assurez-vous que l'interrupteur du produit et celui du secteur sont sur OFF avant de brancher le câble d'alimentation.

Ne branchez ou ne débranchez pas la prise d'alimentation avec les mains mouillées car vous pourriez être électrocuté.

Tenez toujours la prise pour brancher/débrancher le câble d'alimentation de la prise secteur. Tirer sur le câble pour le débrancher peut casser les fils du câble et provoquer un incendie ou une électrocution.

Ce produit est équipé d'une prise de terre et ne doit être connecté qu'à une prise dotée d'une prise de terre. Ne passez pas outre cet élément de sécurité, il pourrait s'ensuivre un risque d'incendie ou d'électrocution.

Si vous utilisez une rallonge ou une barrette d'alimentation, assurez-vous que le courant total (ampères) de tous les équipements connectés est inférieur à la spécification maximum du câble de rallonge, de la barrette ou de la prise murale. Si le produit est déjà fourni avec une barrette d'alimentation intégrée, n'utilisez aucune autre barrette ou rallonge pour la connexion à la prise murale, faute de quoi un incendie ou une électrocution pourrait se produire.

Assurez-vous que le câble d'alimentation chemine sans risque d'être endommagé ou de faire trébucher quelqu'un. S'il est usé ou abîmé, remplacez-le immédiatement pour éviter tout risque d'électrocution.

Ne tordez pas, ne comprimez pas et ne faites pas de nœuds avec le câble d'alimentation car cela pourrait entraîner des surchauffes et provoquer un incendie ou une électrocution.

Vérifiez que la prise secteur à laquelle est branché le produit est toujours accessible facilement et qu'elle n'est pas obstruée.

Utilisez uniquement le câble d'alimentation fourni. L'utilisation d'un câble non approprié peut provoquer un incendie ou une électrocution.

Pour éviter tout risque d'incendie et d'électrocution, n'utilisez pas le câble fourni ici avec un autre équipement électrique.

Si vous ne connectez pas le cordon d'alimentation ou d'autres câbles en respectant la méthode donnée dans le Guide de l'utilisateur, vous pouvez provoquer un incendie.

Il est recommandé d'éteindre la machine avant d'en ouvrir des capots, faute de quoi il pourrait s'ensuivre un risque d'électrocution.

Quand le capot du produit est ouvert, ne touchez pas l'unité de fusion ou la tête d'impression, car vous pourriez vous brûler. Laissez-les refroidir avant de les toucher.

Si le boîtier du produit devient très chaud ou fume, s'il émet des odeurs inhabituelles ou des bruits anormaux, il y a risque d'incendie. Débranchez la prise secteur et contactez votre revendeur.

Si le produit a été renversé ou endommagé, il existe un risque d'électrocution, d'incendie et/ou de blessure. Débranchez la prise secteur et contactez votre revendeur.

Si du liquide (par exemple de l'eau) pénètre dans le produit, il y a risque d'incendie. Débranchez la prise secteur et contactez votre revendeur.

Ne placez pas de conteneurs de liquide sur l'imprimante car cela pourrait provoquer une électrocution, un incendie et/ ou des blessures.

Si des corps étrangers (par exemple des trombones) pénètrent dans l'imprimante, il y a risque d'électrocution, d'incendie et/ou de blessure. Débranchez la prise secteur avant de retirer l'objet.

N'introduisez pas de corps étrangers dans les orifices de ventilation et n'utilisez pas ce produit en laissant le capot arrière ouvert car il y a alors risque d'électrocution, d'incendie et/ou de blessures.

N'utilisez pas de spray inflammable près du produit car il contient des pièces à haute température pouvant provoquer un incendie.

Éteignez l'imprimante avant de la nettoyer pour éviter tout risque de blessure. Utilisez un chiffon humide. N'utilisez pas de nettoyant liquide ou en aérosol.

Assurez-vous que les pièces en mouvement de l'imprimante ne peuvent pas happer des vêtements lâches ou des cheveux lorsque le produit est en fonctionnement afin d'éviter tout risque possible de blessures.

N'effectuez pas d'opérations non spécifiées dans le Guide de l'utilisateur. Cela pourrait provoquer une électrocution, un incendie et/ou des blessures.

Ne touchez pas la batterie (si le produit en utilise une). Il existe un risque d'explosion si vous la remplacez par une batterie de type incorrect. Il n'est normalement pas nécessaire de remplacer la batterie du produit pendant la durée de vie du produit.

Ne jetez pas les cartouches de toner ou de tambour au feu car vous pourriez être brûlé par les explosions de poussières.

Après avoir installé de la mémoire supplémentaire, un disque dur ou une autre option interne, vous devez refermer ou remplacer les capots qui ont été retirés ou les portent qui ont été ouvertes et les sécuriser pour éviter tout risque d'incendie ou d'électrocution.

Le niveau acoustique de ce produit est inférieur à 70 dB (A) conformément à la norme EN ISO 7779.

Les plages de fonctionnement du produit sont les suivantes : 15.6 à 32.2°C et 20 à 80 % HR. L'utilisation du produit en dehors de ces plages pourrait endommager ce dernier.

Si vous montez des éléments tels que des scanners ou des finisseurs, faites attention lorsque vous les déplacez afin de ne pas vous coincer ou de vous blesser.

Si le produit est installé sur un meuble ou un chargeur haute capacité, assurez-vous que les blocages de roues sont enclenchés une fois le produit en position finale pour utilisation, afin d'éviter tout risque de mouvement du produit ou de blessures.

15 - Français

SÉCURITÉ ANTIBASCULEMENT

Afin d’éviter les risques de sécurité, vous devez observer une des configurations recommandées ci-dessous

Si vous utilisez le socle à roulettes ou l’alimentateur à grande capacité, vous devez aussi utiliser les stabilisateurs antibasculement.

Pour d’autres bacs, entretoises ou AGF, vous devez aussi utiliser les options de joint pour les connecter ensemble et assurer le fonctionnement sécuritaire.

Fixez le bac avec l’option de joint et serrez les vis à bouton.

Serrez-les des deux côtés.

16 - Français