Loading...
Operating instructions
Washer-dryer
To avoid the risk of accidents or damage to the machine, it is essential to read these instructions before it is installed and used for the first time.
en-GB |
M.-Nr. 11 887 130 |
Contents |
|
|
Caring for the environment .............................................................................. |
5 |
|
Warning and Safety instructions ..................................................................... |
6 |
|
Operating the washer-dryer ............................................................................. |
14 |
|
Control panel....................................................................................................... |
14 |
|
How the control field works................................................................................. |
15 |
|
Applications......................................................................................................... |
15 |
|
Before using for the first time .......................................................................... |
16 |
|
Miele@home ........................................................................................................ |
17 |
|
Setting up Miele@home ...................................................................................... |
18 |
|
Running the first wash programme ..................................................................... |
18 |
|
Environmentally friendly washing and drying................................................. |
20 |
|
WASHING ........................................................................................................... |
21 |
|
1. |
Prepare the laundry ......................................................................................... |
21 |
2. |
Loading the washer-dryer ............................................................................... |
22 |
3. |
Selecting a programme ................................................................................... |
23 |
4. |
Adding detergent............................................................................................. |
25 |
5. |
Starting the programme .................................................................................. |
29 |
6. |
End of the programme/unloading laundry....................................................... |
29 |
Spin speeds......................................................................................................... |
30 |
|
Programme chart................................................................................................. |
32 |
|
Programme sequence ......................................................................................... |
34 |
|
Detergent............................................................................................................. |
36 |
|
|
Water softeners .............................................................................................. |
36 |
|
Fabric conditioners, liquid starch, starch ....................................................... |
36 |
DRYING .............................................................................................................. |
40 |
|
1. |
Prepare the laundry ......................................................................................... |
40 |
2. |
Loading the washer-dryer ............................................................................... |
41 |
3. |
Selecting a programme ................................................................................... |
41 |
4. |
Select programme settings ............................................................................. |
42 |
5. |
Starting the programme .................................................................................. |
43 |
6. |
End of the programme/unloading laundry....................................................... |
43 |
Programme chart................................................................................................. |
44 |
|
|
Thermospin .................................................................................................... |
46 |
WASHING AND DRYING ................................................................................... |
47 |
|
1. |
Prepare the laundry ......................................................................................... |
47 |
2. |
Loading the washer-dryer ............................................................................... |
47 |
3. |
Selecting a programme ................................................................................... |
47 |
4. |
Selecting programme settings ........................................................................ |
47 |
2
Contents |
|
5. Add detergent.................................................................................................. |
48 |
6. Programme start/finish .................................................................................... |
48 |
After each washing or drying programme ........................................................... |
48 |
Rinse out fluff programme................................................................................ |
49 |
Changing the programme sequence .............................................................. |
50 |
Changing a programme (safety lock) .................................................................. |
50 |
Cancelling a programme ..................................................................................... |
50 |
Adding laundry - AddLoad .................................................................................. |
51 |
Delay start/SmartStart ...................................................................................... |
52 |
Delay start ........................................................................................................... |
52 |
Cleaning and care ............................................................................................. |
54 |
Cleaning the casing and control panel................................................................ |
54 |
Cleaning the detergent dispenser drawer ........................................................... |
54 |
Cleaning the drum............................................................................................... |
56 |
Cleaning the water intake filter............................................................................ |
56 |
Problem solving guide ...................................................................................... |
57 |
A programme does not start ............................................................................... |
57 |
Programme cancellation and fault indicator light................................................ |
58 |
Fault indicator light lights up at the end of a programme.................................... |
59 |
General problems with the washer-dryer ............................................................ |
60 |
An unsatisfactory wash result ............................................................................. |
63 |
Unsatisfactory drying results............................................................................... |
64 |
The door will not open......................................................................................... |
65 |
Opening the door in the event of a blocked drain outlet and/or power cut ........ |
66 |
Service................................................................................................................ |
68 |
Contact in the event of a fault ............................................................................. |
68 |
Warranty .............................................................................................................. |
68 |
Optional accessories........................................................................................... |
68 |
EPREL database ................................................................................................. |
68 |
Garment care label symbols............................................................................. |
69 |
Installation.......................................................................................................... |
70 |
Front view ............................................................................................................ |
70 |
Rear view............................................................................................................. |
71 |
Installation surface .............................................................................................. |
72 |
Carrying the washer-dryer to its installation site ................................................. |
72 |
Removing the transit bars ................................................................................... |
72 |
Refitting the transit bars ...................................................................................... |
74 |
3
Contents |
|
Installing under a worktop................................................................................... |
74 |
Aligning the washer-dryer ................................................................................... |
75 |
The water protection system .............................................................................. |
76 |
Water intake ........................................................................................................ |
77 |
Water drainage .................................................................................................... |
78 |
Electrical connection .......................................................................................... |
79 |
Technical data.................................................................................................... |
80 |
Conformity declaration ........................................................................................ |
81 |
Consumption data............................................................................................. |
82 |
Programmable functions .................................................................................. |
83 |
Choosing and selecting a programmable function ............................................. |
83 |
Editing and saving a programmable function...................................................... |
84 |
Exiting the programming level............................................................................. |
84 |
Keypad tone................................................................................................... |
85 |
PIN code........................................................................................................ |
85 |
Control field switch-off behaviour ................................................................ |
85 |
Memory ........................................................................................................ |
86 |
Gentle action ................................................................................................ |
86 |
Temperature reduction ................................................................................. |
86 |
Maximum rinse level..................................................................................... |
87 |
Suds cooling ................................................................................................. |
87 |
Display brightness........................................................................................ |
87 |
Cottons drying levels.................................................................................... |
87 |
Minimum iron drying levels............................................................................ |
88 |
Extended cool down..................................................................................... |
88 |
Laundry ring prevention................................................................................ |
88 |
Remote control............................................................................................. |
89 |
SmartGrid..................................................................................................... |
89 |
RemoteUpdate ............................................................................................. |
89 |
Switching off WiFi................................................................................................ |
91 |
Copyrights and licences for the communication module.................................... |
91 |
Detergents and care products ......................................................................... |
92 |
Detergent............................................................................................................. |
92 |
Specialist detergents .................................................................................... |
93 |
Fabric care .................................................................................................... |
94 |
Additives ....................................................................................................... |
94 |
Machine care....................................................................................................... |
94 |
4
Caring for the environment
Disposal of the packing mater-
ial
The packaging is designed to protect the appliance from damage during transportation. The packaging materials used are selected from materials which are environmentally friendly for disposal and should be recycled.
Recycling the packaging reduces the use of raw materials in the manufacturing process and also reduces the amount of waste in landfill sites.
Disposing of your old appli-
ance
Electrical and electronic appliances often contain valuable materials. They also contain specific materials, compounds and components, which were essential for their correct function and safety. These could be hazardous to human health and to the environment if disposed of with your domestic waste or if handled incorrectly. Please do not, therefore, dispose of your old appliance with your household waste.
Please dispose of it at your local community waste collection / recycling centre for electrical and electronic appliances, or contact your dealer or Miele for advice. You are also responsible for deleting any personal data that may be stored on the appliance being disposed of. Please ensure that your old appliance poses no risk to children while being stored prior to disposal.
5
Warning and Safety instructions
It is essential to read these instructions.
This washer-dryer complies with all current local and national safety requirements. However, inappropriate use can lead to personal injury and damage to property.
Read the operating instructions carefully before using the washerdryer. They contain important information on safety, installation, use and maintenance. This prevents both personal injury and damage to the washer-dryer.
In accordance with standard IEC 60335-1, Miele expressly and strongly advises that you read and follow the instructions in the chapter on installing the washer-dryer as well as the safety instructions and warnings.
Miele cannot be held liable for damage caused by non-compliance with these instructions.
Keep these operating instructions in a safe place and pass them on to any future owner.
Correct application
This washer-dryer is intended for use in domestic households and similar working and residential environments.
This washer-dryer is intended for use in domestic households for the following applications only:
-washing textiles which have a care label stating that they are washable.
-drying textiles which have been washed in water and have a care label stating that they are suitable for tumble drying.
6
Warning and Safety instructions
Any other usage is not permitted. Miele cannot be held liable for
damage resulting from improper use or incorrect operation of the
machine.
This washer-dryer is not intended for outdoor use.
This washer-dryer can only be used by people with reduced physical, sensory or mental capabilities, or lack of experience or knowledge, if they are supervised whilst using it or have been shown how to use it in a safe way and understand and recognise the consequences of incorrect operation.
Safety with children
Children under eight years of age must be kept away from the washer-dryer unless they are constantly supervised.
Children eight years and older may only use the washer-dryer unsupervised if they have been shown how to use it safely and recognise and understand the consequences of incorrect operation.
Children must not be allowed to clean or maintain the washerdryer unsupervised.
Please supervise children in the vicinity of the washer-dryer and do not let them play with it.
Technical safety
Before setting up the washing-dryer, check it for any externally visible damage.
Do not install or use a damaged washer-dryer.
Before connecting the washer-dryer, ensure that the connection data on the data plate (fuse rating, voltage and frequency) match the mains electricity supply. If in any doubt, consult a qualified electrician.
7
Warning and Safety instructions
The electrical safety of this washer-dryer can only be guaranteed when correctly earthed.
It is essential that this standard safety requirement is met. If in any doubt, please have the household wiring system tested by a qualified electrician.
Miele cannot be held liable for the consequences of an inadequate earthing system (e.g. electric shock).
Do not connect the machine to the mains electricity supply by an extension lead, multi-socket adapter or similar. These can overheat and are a fire hazard.
Unauthorised repairs could result in unforeseen dangers for the user, for which the manufacturer cannot accept liability. Repairs should only be undertaken by a Miele authorised service technician, otherwise any subsequent damage will not be covered by the guarantee.
Please observe the instructions in “Installation” and the “Technical data”.
The electrical socket must be easily accessible after installation so that the washer-dryer can be disconnected from the electricity supply if necessary.
The washer-dryer must be isolated from the electricity supply when cleaning and maintaining the machine and in the event of a fault.
The Miele “Water protection system” protects from water damage provided the following conditions are met:
-The machine is correctly plumbed in and connected to the electricity supply.
-If a fault or damage has been identified, the washer-dryer must be examined by a competent person before further use, and repaired if necessary.
8
Warning and Safety instructions
The water inlet pressure must be at least 100 kPa and must not exceed 1000 kPa.
Faulty components must only be replaced by genuine Miele original spare parts. Only when these parts are fitted can Miele guarantee the safety standards of the machine.
If the electrical connection cable is faulty it must only be replaced by a Miele authorised service technician to protect the user from danger.
This washer-dryer must not be used in a non-stationary location (e.g. on a ship).
Do not make any alterations to the washer-dryer, unless authorised to do so by Miele.
Reliable and safe operation of this washer-dryer can only be assured if it has been connected to the mains electricity supply.
The manufacturer’s warranty will be invalidated if the washer-dryer is not repaired by a service technician authorised by Miele.
9
Warning and Safety instructions
Correct use
Do not install the washer-dryer in a room where there is a risk of frost. Frozen hoses may burst or split. The reliability of the electronic control unit may be impaired at temperatures below freezing point.
Before using the machine for the first time, check that the transit bars at the rear of the washer-dryer have been removed (see “Installation - Removing the transit bars”). During spinning, a transit bar which is still in place may result in damage to both the washer-dryer and adjacent furniture or appliances.
Turn off the stopcock if the washer-dryer is to be left for any length of time (e.g. holiday), especially if there is no floor drain (gully) in the immediate vicinity.
Flooding danger. If hooking the drain hose into a wash basin, check that the water can drain off quickly enough to prevent the sink from overflowing. Make sure the drain hose is secure, so that the force of the water flowing out of the hose does not dislodge it.
Take care to ensure that foreign objects (e.g. nails, pins, coins, paper clips) do not find their way into the machine with the laundry. These may damage components of the machine (e.g. suds container, drum), which in turn can result in damage to the laundry.
Do not leave any detergent dispensing aids, e.g. plastic dispenser balls, in the laundry when tumble drying. These dispensers can melt during the drying programme and cause damage to the washerdryer and the laundry.
Risk of burning or scalding due to hot temperatures. The metal cap located on the inside of the door glass will be hot after drying. Open the door wide after drying. Do not touch the metal cap.
10
Warning and Safety instructions
Fabric conditioner and similar products must be used according to the instructions on the manufacturer's packaging.
If the correct amount of detergent is dispensed, the washer-dryer should not need to be descaled. If, however, there is large build-up of limescale and you need to descale it, you must use a special noncorrosive descaling agent. A suitable descaling agent is available to order from Miele (see “Optional accessories”). Instructions on the packaging must be strictly observed.
To prevent the risk of fire, the following textiles must not be dried: - Items which have not been washed.
-Items, such as workwear, which have not been thoroughly washed and which are still soiled with grease, oil or other deposits (such as cooking oil, cosmetics, lotions etc). If items have not been thoroughly washed there is a danger that these might ignite when heated, even after they have been removed from the washer-dryer at the end of the programme.
-Items (e.g. mops and floor cloths) which have been treated with inflammable cleaning agents or which contain residues of acetone, alcohol, benzene, petrol, stain remover, turpentine, wax and wax remover or other chemicals.
-Items which have been splashed with hair lacquer, hair spray, nail varnish remover or similar substances.
When washing heavily soiled items ensure that you use sufficient detergent and select a high temperature. If in doubt, wash the items several times.
11
Warning and Safety instructions
To prevent the risk of fire, the following textiles must not be
tumble dried:
-Items which have been cleaned using chemicals (e.g. professional dry-cleaning agents).
-Items which contain a large proportion of rubber, foam rubber or rubber-like materials. For example, products made from latex foam rubber, shower caps, waterproof textiles, rubberised articles and items of clothing and pillows with foam rubber filling.
-Damaged items which contain padding or fillings (e.g. pillows, jackets). When damaged, the filling can get out with the risk of it igniting.
Only use dyes specified by the manufacturer as being suitable for use in a domestic washing machine. These must only be used in domestic quantities. Always observe the manufacturer's instructions carefully.
Colour run and dye removers contain sulphur compounds which can cause corrosion. Do not use these products in this washer-dryer.
In many programmes, the heating phase is followed by a cooling down phase to ensure that the items are not too hot to handle when you remove them (this also avoids the danger of the laundry self-ig- niting). The programme is not finished until the cooling down phase has been completed. As soon as the programme has finished, remove all laundry from the drum.
Warning: do not switch the washer-dryer off before the drying programme has finished. If this is done, the laundry must be removed immediately and hung up or spread out to cool it down.
This washer-dryer must not be connected to a controllable socket, e.g. a timer or electrical device with peak-load negotiation. There is a risk of the laundry igniting itself if a drying programme is cancelled before the cooling phase has finished.
12
Warning and Safety instructions
Textiles which have been pre-treated in solvent based cleaning agents must be thoroughly rinsed in clean water before being washed in the machine.
Do not use solvent based cleaning agents, e.g. those containing benzine, in this washer-dryer, as this may result in damage to component parts and create toxic fumes. Such agents also pose a fire and explosion hazard.
If detergent comes into contact with the eyes, rinse them thoroughly with lukewarm water immediately. If swallowed, seek medical assistance immediately and retain the packaging or label for reference. Those with skin problems or sensitive skin should avoid their skin coming into contact with detergent.
The maximum load for this washer-dryer is 8.0 kg (dry weight) for washing and 5.0 kg (dry weight) for tumble drying. See the “Programme chart” for the maximum recommended loads for individual programmes.
Accessories
Accessory parts may only be fitted when expressly approved by Miele. If other parts are used, guarantee, performance and product liability claims will be invalidated.
Miele will guarantee to supply functional spare parts for a minimum of 10 years and up to 15 years following the discontinuation of your washer-dryer.
If you order a plinth for this washer-dryer (available from Miele as an optional accessory), make sure it is the correct one.
Miele cannot be held liable for damage caused by non-compliance
with these Warning and Safety instructions.
13
Operating the washer-dryer
Control panel
2 |
3 |
4 |
6 |
8 |
10 |
|
1 |
|
5 |
7 |
9 |
11 |
12 |
a Control field
The control field consists of a time display and various sensor controls. The individual sensor controls are explained in the following sections.
b Temperature sensor controls for selecting the temperature
c Spin speed sensor controls for selecting the spin speed
d Extra options sensor controls
You can supplement programmes with extra options.
When a programme is selected, the sensor controls for the possible extra options light up.
e Washing/drying sensor controls
You can use the Washing and Drying sensor controls to select whether you want to wash, dry or wash and dry.
f Indicator lights
lights up if there are faults affecting the water inlet and drainage
lights up if excess detergent was used
displays various information in combination with a number on the time display (see “Problem solving guide”)
The Add laundry function cannot be selected.
g Drying level sensor controls
Select the drying level of a drying programme using the , and
sensor controls.
h Time display
After the programme has started, the programme running time will appear on the display in hours and minutes. When delay start is being used, the programme running time will appear after the delay start period has elapsed.
14
Operating the washer-dryer
i Start/Add laundry sensor control How the control field works
–The programme can be started as soon as the sensor control is flashing on and off. Touching the
Start/Add laundry sensor control starts the selected programme. The sensor control lights up constantly.
–Once the programme has been started, the Start/Add laundry sensor control allows you to add laundry.
j Optical interface
This is used by the Customer Service Department as a transmission point.
k Delay start sensor control with arrow buttons and
With the delay start function, you can delay the start of the programme.
Please see “Delay start/SmartStart” for more information.
l Programme selector
for selecting programmes and for switching off the appliance. The washer-dryer is switched on by selecting a programme. You can switch the washer-dryer off by turning the programme selector to the position.
The sensor controls react to fingertip contact. If a sensor control is illuminated, it can be selected.
If a sensor control is brightly lit, this means it is currently selected
If a sensor control is dimly lit, this means it can be selected
Applications
You can use this washer-dryer to:
-Wash separately
Maximum load (depending on programme) 8.0 kg
-Dry separately
Maximum load (depending on programme) 5.0 kg
or
-Wash and dry in a continuous sequence
Maximum load (depending on programme) 5.0 kg
15
Before using for the first time
Damage resulting from incorrect installation and connection. Installing and connecting the washer-dryer incorrectly will cause serious property damage.
Please observe the instructions in “Installation”.
This washer-dryer has undergone a complete functional test at the factory and there will be some residual water in the drum from this process.
Remove the drain hose elbow
from the drum
An elbow piece for the drain hose is stored in the drum.
Removing the protective foil
and stickers
Remove:
-Any protective film from the door
-Any stickers from the front and the lid
Please do not remove any labels (e.g. the data plate) which are visible when you open the door.
Reach under the door grip and pull the door open.
Remove the elbow piece.
Shut the door with a gentle swing.
16
Before using for the first time
Miele@home
Your washer-dryer is equipped with an integrated WiFi module.
To use this feature, you will need:
-A WiFi network
-The Miele app
-A Miele user account. The user account can be created via the Miele app
The Miele app will guide you as you connect your washer-dryer to your home WiFi network.
Once your washer-dryer is connected to your WiFi network, you can use the app to carry out the following activities, for example:
-Controlling your washer-dryer remotely
-Calling up information on the operating status of your washer-dryer
-Calling up information on the programme sequence of your washerdryer
Connecting your washer-dryer to your WiFi network will increase energy consumption, even when the washer-dryer is switched off.
Make sure there is sufficient signal strength for your WiFi network at the washer-dryer installation site.
Availability of the WiFi connection
The WiFi connection shares a frequency range with other appliances (including microwave ovens and remote control toys). This can give rise to sporadic or even complete connection failures. Therefore, the availability of featured functions cannot be guaranteed.
Miele@home availability
The ability to use the Miele app depends on the availability of the Miele@home service in your country.
The Miele@home service is not available in every country.
For information about availability, please visit www.miele.com.
Miele App
The Miele App is available to download free of charge from the Apple App Store® or from the Google Play Store™.
17
Before using for the first time
Setting up Miele@home
There are 2 ways of connecting:
1.Via the Miele app (default)
2.Via WPS
Logging in via the Miele app
Turn the programme selector to the
MobileStart programme.
appears on the time display. The timeout then starts to count down from 10 minutes on the time display.
The Miele app will guide you through the remaining steps.
When you have successfully connected,
will appear on the time display.
Logging in via WPS
Turn the programme selector to the
MobileStart programme.
Touch the sensor control until appears on the time display and a short keypad tone sounds.
The timeout then starts to count down from 2 minutes on the time display.
When you have successfully connected,
will appear on the time display.
Tip: If the connection has not been set up when the timeout has finished counting down, repeat the process.
Running the first wash pro-
gramme
Damage resulting from failure to remove the transit bars.
Failure to remove the transit bars can result in damage to the washer-dryer and to adjacent cabinetry or appliances.
Remove the transit bars as described in “Installation”.
Before first use, the Cottons programme must be run without laundry and without detergent.
Open the stopcock.
Turn the programme selector to Cottons.
The washer-dryer is switched on and the temperature 40 °C lights up in the control field.
Touch the Start/Add laundry sensor control.
The wash programme will start.
After 10 minutes, the indicators dim, except for the Start/Add laundry sensor control.
18
Before using for the first time
Opening the door at the end of
the programme
The door remains locked during the anti-crease phase. The control field lights up for the first 10 minutes. The control field then goes out and the
Start/Add laundry sensor control flashes.
Turn the programme selector to the
position.
appears on the time display and the
indicator light goes out.
The door will unlock.
Tip: After the anti-crease phase, the washer-dryer switches off. The door is unlocked automatically. The control field will be completely dark.
Reach under the recessed grip and pull the door open.
Tip: Leave the door slightly open to allow the drum to dry.
Initial commissioning is now complete.
19
Environmentally friendly washing and drying
Energy and water consumption
-Use the maximum load size for the current wash programme. The energy and water consumption will then be the lowest in relation to the size of the load.
-Programmes that are more efficient with regard to energy and water consumption generally have a longer programme running time. By extending the programme running time, the wash temperature that is actually reached can be reduced while still providing the same wash results.
For example, the ECO 40-60 programme has a longer programme running time than the Cottons 40 °C or 60 °C programme. The ECO 40-60 programme is more efficient in terms of energy and water consumption.
-Use the Express programme for small, lightly soiled loads.
-Modern detergents make it possible to wash at lower temperatures (e.g. 20 °C). Using lower temperature settings will save energy.
-To maintain the hygiene of the washer-dryer, carry out a hot wash (above 60 °C) at regular intervals. The
indicator light lights up in the control field and appears on the time display of the washer-dryer to remind you.
Detergent
-Do not exceed the amounts of detergent recommended by the manufacturer on the packaging.
-Adjust the dosage to the degree of soiling of the laundry.
-Reduce the amount of detergent with smaller loads (approx. 1/3 less than the amount recommended can be used when washing a half load).
When drying with a tumble
dryer
To save energy when tumble drying, select the highest possible spin speed for the wash programme and for the thermo-spin.
20
WASHING
1. Prepare the laundry
Empty all pockets.
Damage due to foreign objects.
Nails, coins, paper clips, and so on can cause damage to textiles and components in the machine. Check the laundry before washing and remove any foreign objects.
Sort the laundry
Sort the laundry by colour and by care label. Most garments have a textile care label in the collar or side seam.
Tip: Dark textiles often contain excess dye and should be washed separately several times before being included in a mixed load. Always wash whites and colours separately.
Pre-treating stains
Badly soiled areas and stains should be cleaned as soon as possible, preferably whilst still fresh. Stains should be carefully dabbed off using a soft, colourfast cloth. Do not rub.
Damage due to solvent-based cleaning agents.
Cleaning agents containing benzine, stain remover, etc. can damage plastic parts.
When pre-treating textiles, make sure that plastic parts do not come into contact with the cleaning agent.
Risk of explosion due to solventbased cleaning agents.
If solvent-based cleaning agents are used, an explosive mixture can form. Never use solvent-based cleaning agents in the washer-dryer.
General tips
-Curtains: remove rollers and lead weights or place in a laundry bag.
-Sew in or remove any loose underwiring in bras.
-Close any zips, attach velcro fasteners, fasten hooks and eyes, etc. before washing.
-Fasten duvet covers and pillow cases to prevent small items from becoming rolled up inside them.
Do not wash items which are specified by the manufacturer as not washable on the care label ( symbol).
21
WASHING
2. Loading the washer-dryer
Open the door
Reach under the recessed grip and pull the door open.
Check the drum for pets or foreign objects before loading it with laundry.
Unfold the laundry and load loosely into the drum.
Mixing both large and small items gives better wash results and also helps to distribute the load evenly during spinning.
The most efficient use of energy and water consumption is achieved when a full load is washed. However, do not overload as this reduces cleaning efficiency and causes creasing.
Tip: Please note the maximum load size for different wash programmes.
Close the door
Make sure that no items are caught between the door and the sealing ring.
Shut the door with a gentle swing.
22
WASHING
3. Selecting a programme
Switching the washer-dryer on
Turn the programme selector to a programme.
The control field lights up.
Selecting a programme
Turn the programme selector to the required programme.
The estimated wash time is shown on the time display and the pre-set temperature and spin speed light up in the control field.
-Using the MobileStart programme selector position
Turn the programme selector to the
MobileStart position.
Tip: In order to use MobileStart , the washer-dryer must be logged on to the WiFi network and Remote control must be switched on.
Once the programme has started, the washer-dryer can be operated with the Miele app.
Selecting washing
Touch the Washing or Drying sensor control until just the Washing sensor control is brightly lit up.
The Drying sensor control must only light up dimly as otherwise the wash programme would be followed immediately by the relevant drying programme.
23
WASHING
Selecting a temperature and spin speed
The wash programme’s pre-set temperature and spin speed light up brightly. The choice of available temperatures and spin speeds for the wash programme light up dimly.
The temperatures reached in the wash programme might not be the same as the temperatures selected. Perfect wash results are achieved through a combination of energy use and wash duration.
Touch the sensor control for the temperature you want.
The sensor control lights up brightly.
Touch the sensor control for the spin speed you want.
The sensor control lights up brightly.
Selecting extra options
The sensor controls for the Short and
Gentle extra options light up dimly when they can be selected in addition to the programme.
Touch the sensor control for the extra option you want.
The sensor control lights up brightly.
Gentle
Drum rotation and wash duration are reduced. Lightly soiled fabrics are washed more gently.
Short
For textiles with light soiling with no visible stains.
The duration of the main wash is reduced.
Selecting the delay start function
You can use delay start to set the start time for a programme.
Select a delay start time if required.
Please see “Delay start/SmartStart” for more information.
24
WASHING
4. Adding detergent |
Adding fabric conditioner |
Detergent is depensed either via the detergent drawer or with Cap dos-
ing .
Detergent drawer
Any detergent suitable for domestic washing machines can be used. Please observe the instructions for use and dosage on the detergent packaging.
Adding detergent
Pull out the detergent drawer and add detergents to the compartments.
Detergent for the main wash
Fabric conditioner, liquid starch
or capsules
Add fabric conditioner or liquid starch to the compartment. Do not exceed the maximum level mark.
This will be automatically dispensed in the final rinse cycle. At the end of the wash programme a small amount of water remains in the compartment.
If starching frequently, thoroughly clean the detergent drawer, especially the siphon, regularly.
25
WASHING
Tips on dispensing
Adjust the detergent dosage to the degree of soiling of the laundry and the load size. Reduce the amount of detergent with smaller load sizes (e.g. reduce the amount of detergent by ¹⁄ when washing a half load).
Too little detergent:
-Results in laundry not being cleaned properly and may cause it to become grey and hard to the touch over time
-Can lead to a build-up of mould in the washer-dryer
-Results in grease not being completely removed from the laundry
-Can lead to limescale deposits on the heater elements
Too much detergent:
-Causes poor wash, rinse and spin results
-Causes higher water consumption as an extra rinse cycle is automatically activated
-Is a greater burden on the environment
See “Washing” – “Detergent” for further information about detergents and how much to dispense.
Using detergent tablets or pods
Always put detergent tablets or pods directly in the drum with the laundry. They cannot be added via the detergent drawer.
26
WASHING
CapDosing
CapDosing can only be activated via the Miele app.
3 different types of capsule are available:
= Fabric care (e.g. fabric conditioner, proofing agent)
= Additives (e.g. detergent enhancer)
= Detergent (for the main wash only)
Each capsule contains the correct amount for one wash cycle.
Capsules are available from www.shop.miele.com, the Miele Customer Service Department or your Miele dealer.
Capsules pose a health risk. The ingredients of capsules can be hazardous to health if they are swallowed or come into contact with skin.
Keep capsules out of the reach of children.
Inserting a capsule
Open the detergent drawer.
Open the lid of the / compartment.
Press the capsule in firmly.
27
WASHING
Remove the empty capsule at the end of the programme.
For technical reasons, a small amount
of water will remain in the capsule.
Close the lid and press it firmly shut.
Close the detergent drawer.
The capsule is opened by the act of inserting it into the detergent drawer. The contents can run out of the capsule if you then remove it from the detergent drawer before it is used. Dispose of the capsule and do not re-use it.
The wash programme will dispense the contents of the capsule at the correct time.
When using CapDosing, water intake to the compartment takes place solely via the capsule.
When using capsules, do not add fabric conditioner to the compartment.
28
WASHING
5. Starting the programme
Touch the flashing Start/Add laundry sensor control.
The door will lock and the wash programme will start.
If a delay start period has been selected, this counts down on the time display. At the end of the delay start period or immediately after the programme has started, the programme running time appears on the time display.
Laundry can be added or removed at any time, provided that the symbol is not illuminated in the display (see “Changing the programme sequence – Adding laundry”).
Saving energy
After 10 minutes, the indicators dim. The Start/Add laundry sensor control flashes slowly.
To reactivate the indicators:
Touch the Start/Add laundry sensor control (this does not have any effect on a programme that is running).
6. End of the programme/un-
loading laundry
In the anti-crease phase, the drum continues to turn for up to 30 minutes after the end of the programme. The door is locked. The control field lights up for the first 10 minutes. The control field then goes out and the Start/Add laundry sensor control flashes.
Turn the programme selector to the
position.
appears on the time display and the
indicator light goes out.
The door will unlock.
Tip: The door unlocks automatically at the end of the anti-crease phase.
Pull open the door.
Remove the laundry.
Items left in the drum could discolour other items in the next wash or become discoloured themselves. Remove all items from the drum.
Check the door sealing ring for any foreign objects.
29
Loading...