How it Works
Livarno
Loading...
Z30591A-BS
User Manual
11 pgs591.09 Kb0
User Manual [de, en, it, es]
35 pgs766.42 Kb0

Livarno Z30591A-BS User Manual

Download
Page 1
TableTop MisTer
Assembly, operating and safety instructions
Z30591A-BS
6
Page 2
GB / IE Assembly, operating and safety instructions Page 3
Page 3
Table of Contents
Introduction
Safety notes .................................................................................................................................. Page 5
Before Initial Use ......................................................................................................................Page 6
Assembly and Initial Use
Maintenance, Cleaning and Care
Disposal ............................................................................................................................................ Page 8
3 GB/IE
Page 4
Introduction
Tabletop mister
Q
Introduction
Familiarise yourself with the product be-
fore using it for the first time. In addition
please refer carefully to the operating and assembly instructions and to the safety advice set out below. Use the product only as described and for the indicated purpose. Keep these instruc­tions in a safe place. If you pass the product on to anyone else, please ensure that you also pass on all the documentation.
Q
Normal use
The tabletop mister is intended to provide atmospheric lighting and humidify the air in indoor environments. With the help of ultrasonic waves it creates a fine mist which looks like smoke. The LEDs of the tabletop mister automatically change their colour. Any use other than that previously described or any change to the product is not permitted and may lead to injuries and / or damage to the product. The manufacturer does not assume any liability for damage arising from improper use. The product is solely intended for private and not for commercial use.
Q
Description of Parts
1
Glass sphere
2
Mains lead
3
Connection plug
4
Glass sphere stand
5
Marking line
6
Holder (for mist generator)
7
Retainer (for attachment)
8
Mist generator
9
Water level sensor
10
Attachment
11
Max. mark
12
Rubber seal
13
Mains adapter
14
Adapter plug
15
LEDs
16
Ceramic disc
17
Mist generator holder
Q
Technical Data
Tabletop mister:
Max. filling volume: approx. 1600 ml Temperature of the liquid to be filled in: 5 – 50 °C
Mist generator:
Operating voltage: 24 V ~ Power: 22 W Protection class:
Mains adapter:
Model: BLA24-1000 Input voltage: 230 - 240 V ∼, 50 Hz Output voltage: 24 V ∼, 1000 mA Protection class:
Q
Included in delivery
Note: When opening the packaging, please make
sure not to accidentally throw away assembly ma­terials. Please check immediately on unpacking that the delivery is complete and that the product and all parts are in perfect condition. Do not under any circumstances assemble the product if the delivery is incomplete.
1 glass sphere 1 glass sphere stand 1 mist generator with holder and mains lead 1 stand (for mist generator) 1 plastic attachment 1 mains adapter 1 assembly and operating instructions
4 GB/IE
Page 5
Safety notes
WARNING!
and instructions. Failure to comply with the safety information and instructions may result in, fire and / or severe injuries.
Keep all the safety advice and instruc­tions in a safe place for future reference!
J
CHILDREN! Never allow children
supervised with the packaging material. There is a danger of suffocation from the packaging material. Children frequently underestimate the dangers. Children should be kept away from the product at all times. This is not a toy.
J Children or persons who lack the knowledge
or experience to use the device or whose phys­ical, sensory or intellectual capacities are limit­ed must never be allowed to use the device without supervision or instruction by a person responsible for their safety. Children must never be allowed to play with the device.
J This device is not a toy and should not be
played by children. Children are not able to understand the dangers that can occur when handling this device.
J Do not use the device / product if it is damaged. J Check all accessories and materials regularly
for rust, wear and / or other damage. Do not use the product if it is rusty, worn or otherwise damaged.
J Place the product onto a flat and level surface.
Otherwise the product may topple over. This could result in injuries and/or damage to the product.
J Please use the device only together with the
accessories supplied.
J The device must only be used indoors. J Use the mist generator
the mains adapter supplied BLA24-1000). Otherwise the appliance may be damaged.
Please read all safety information
WARNING!
DANGER TO LIFE AND ACCIDENT HAZARD FOR TODDLERS AND
SMALL
to play un-
8
only together with
13
(model:
Safety notes
m CAUTION! The tabletop mister generates a
fine spray of water. Please ensure that the loca­tion where the lamp is positioned is able to re­sist moisture. Otherwise damage to property may result.
Avoid the danger of death from
electric shock!
J Please ensure before use that the mains voltage
available is the same as the operating voltage required for the mains adapter supplied
J Before connecting the device to the mains you
should always check the mist generator and the mains adapter
13
for any damage.
J A damaged device represents the danger of
death from electric shock.
J Please consult a specialist electrician if you dis-
cover any damage or problems with the device, or for the performance of repairs to the device.
J Never open any of the electrical equipment or
insert any objects into it. Such interventions rep­resent the danger of death from electric shock.
J Never touch the mains adapter
or wet hands.
J Ensure that the connection plug
13
er
never come into contact with water or
other liquids.
J Do not use the mains leads to carry or hang up
the mist generator mains adapter
8
or in order to remove the
13
from the socket. Keep the mains leads away from heat, oil, sharp edges or moving parts of the device. Damaged or entangled connection leads increase the risk of electric shock.
J Do not use the water level sensor
to carry the mist generator the glass sphere level sensor
1
. Please ensure that the water
9
is not scratched or hit by hard
8
or pull it out of
objects. Otherwise the water level sensor may be damaged.
J Dispose of the mist generator
2
lead
is damaged! The mains lead of the
mist generator
8
cannot be replaced.
8
J It is extremely important to comply with your
national guidelines for electrical connections
13
8
13
with damp
3
and adapt-
9
in order
if the mains
.
9
5 GB/IE
Page 6
Safety notes / Before Initial Use / Assembly and Initial Use
before you connect the device. If you are not sure, please contact a specialist electrician.
J Position the device in such a way that the con-
nection plug adapter plug
3
the mains adapter 13 and the
14
cannot be flooded with water. All electrical connections and installations must be located in areas which are protected against flooding.
J Make sure that the adapter
13
is protected from
water splashes.
J Only carry out work on the device when the
adapter
13
has been disconnected from the
mains current.
J Please ensure that the rubber seal
12
is correctly
and tightly fitted in place before you fill the glass
1
sphere
with water.
m CAUTION! DANGER OF FLOODING!
Under no circumstances should you pull on the mains lead with water. Otherwise the rubber seal
2
if the glass sphere 1 is filled
12
may
slip out and the water leak out of the glass
1
sphere
.
m CAUTION! An uneven surface may result in
the tabletop mister falling over when it is filled with water. Injuries and / or damage to the product may be the result.
m CAUTION! DANGER OF INJURY! You
should never attempt to change the location of the tabletop mister if it is filled with water. Oth­erwise the result may be injuries or damage to property.
m CAUTION! DANGER OF INJURY! You
should never attempt to change the location of the tabletop mister if the mains adapter
13
is connected to a socket and the device is switched on. Otherwise the result may be inju­ries or damage to property.
m CAUTION! DANGER OF INJURY! Do not
put your hand close to the ceramic disc the mist generator
8
is switched on. Ultrasonic
16
if
vibrations may give rise to pains. Keep a distance of at least 10 cm away from the mist generator
8
.
J CAUTION! LED RADIATION! Avoid dam-
age to your eyes! Do not look into the LED beam. Never use optical equipment such as magnifying glasses or similar items in order to
look into the LED beams. Protect yourself and your environment by taking appropriate pre­cautionary measures.
J Never point the LED beams at reflecting surfac-
es, individuals or animals. The consequences might otherwise be blindness or irritation of the eyes. Even weak LED beams may result in eye damage.
J The LEDs have a very long life and cannot be
replaced.
J Disconnect the device from the mains before
you clean it or fill it with water.
J Fill the glass sphere
1
up to the Max. mark 11
only.
Q
Before Initial Use
j Please select an appropriate location to set up
the tabletop mister.
j Please ensure that the surfaces solid, flat and
level.
m CAUTION! An uneven surface may result in
the tabletop mister falling over when it is filled with water. Injuries and / or damage to the product may be the result.
m CAUTION! The tabletop mister generates a
fine spray of water. Please ensure that the lamp is positioned in a location which is able to resist moisture. Otherwise the result may be damage to property.
Q
Assembly and Initial Use
Q
Assembly
j Place the glass sphere 1 on the glass sphere
4
stand
j Guide the connection plug
lead sphere seal remain hanging outside the glass sphere
near a socket (230 – 240 V ~, 50 Hz).
3
and the mains
2
through the small hole in the glass
1
. Then close the hole with the rubber
12
and allow the mist generator 8 to
1
.
If necessary, pull gently on the mains lead. Note: You can moisten the rubber seal
12
so
that it slides more easily into the hole.
6 GB/IE
Page 7
Assembly and Initial ... / Maintenance, Cleaning and Care
j Make sure that the rubber seal 12 completely
covers the hole, otherwise the water could leak from the glass sphere
1
.
j Make sure that you have inserted the mist
generator
8
into mist generator holder 17
before you switch the tabletop mister on.
j Insert the attachment
into the retainer
j Place the mist generator
and put this in the glass sphere
j Please ensure that the mains lead
lie across the mist generator
10
with the pointed end
7
of the holder 6.
8
in the holder 6
8
1
.
2
does not
, as then no mist is generated. In this case pull a small amount of the mains lead Note: The position of the mist generator
2
through the rubber seal 12.
8
affects the quantity of mist generated. The best results are obtained if you position the mist generator
j Check whether the glass sphere
tioned correctly on the glass sphere stand (marking line
8
as shown in Illustration A.
5
facing downwards).
1
is posi-
4
j Adjust the angle of the opening of the glass
1
sphere
in order to prevent the water from
overflowing.
j Fill the glass sphere
1
with approx. 1600 ml of
water. Note: Fill the glass sphere
11
mark
only.
1
up to the Max.
Note: The best result is obtained if the water is just above the water level sensor Note: The mist generator
9
.
8
switches off au­tomatically if the water level falls below the water level sensor will light up on the water level sensor
9
. In addition, a red LED light bulb
9
when
the water level falls below the water level sen-
9
sor
.
Note: Do not use fragrance oil.
Q
Initial Use
j Connect the connection plug 3 to the adapter
14
plug
and insert the mains adapter 13 into
a socket (230 – 240 V ~, 50 Hz). Note: Please ensure that the mains adapter
13
is located outside of the mist that is generated.
j The mist generator
8
begins to generate a
fine spray of water which looks like smoke. The
15
LEDs
light up and automatically change
their colour.
j If the tabletop mister is only generating a little
or no mist, please add more water.
j If the tabletop mister is only generating water
spray or no mist will be produced, the water is probably dirty. It should then be replaced (see “Changing the Water”).
j Turn the tabletop mister off by removing the
mains adapter
Q
Maintenance, Cleaning and Care
WARNING!
13
from the socket.
DANGER OF DEATH FROM
ELECTRIC SHOCK! Always remove the mains adapter
13
from the socket before performing any
work on the product.
Q
Changing the Water
j Change the water at least once a week. This
prevents the formation of algae.
j Pour out the water and allow the tabletop mis-
ter to dry completely if you are not going to use it for a prolonged period.
j Dirty water impairs / prevents the correct func-
tioning of the mist generator
8
. If the device is only producing water spray or if the quantity of mist is less than usual, replace the water in the
14
1
.
13
from the socket.
3
and adapter
.
glass sphere
j Remove the mains adapter
Disconnect the connection plug plug
m CAUTION! It is essential to hold the glass
1
sphere drain / spill out of the glass sphere
j Remove the mist generator
from the glass sphere
over a wash basin. Water might
1
8
and the holder 6
1
. Pull the rubber seal 12
out of the small hole in the glass sphere.
j Pour the water out and clean the glass sphere j Reassemble the tabletop mister as described
under "Assembly and Initial Use".
.
1
.
7 GB/IE
Page 8
Maintenance, Cleaning and Care / Disposal
Q
Cleaning and Care
j Use a dry, lint-free cloth for external cleaning
and care.
j In the case of more extreme soiling, use a
damp cloth and a mild washing-up liquid. Then rinse off the glass sphere and dry it off.
j Clean the ceramic disc
cotton bud (see Illustration B).
j Under no circumstances should you use caustic
detergents. Otherwise the material of the prod­uct may be damaged.
Q
Disposal
The packaging is made entirely of recy-
clable materials, which you may dispose of at local recycling facilities.
Contact your local refuse disposal authority for more details of how to dispose of your worn-out product.
1
with clean water
16
with a moistened
To help protect the environment, please
dispose of the product properly when it has reached the end of its useful life and not in the household waste. Information on collection points and their opening hours can be obtained from your local authority.
EMC
Product description:
Tabletop mister Model No.: Z30591A-BS Version: 11 / 2010
8 GB/IE
Page 9
MAX.
10
MAX.
11
7
6
12
1
2 3
9
17
151216
45
13
14
8
9 GB/IE
Page 10
A
B
11
10 GB/IE
16
Page 11
IAN 56453
Milomex Ltd.
c / o Milomex Services Hilltop Cottage Barton Road Pulloxhill Bedfordshire MK45 5HP UK
© by ORFGEN Marketing
Last Information Update: 11 / 2010
Ident.-No.: Z30591A-BS112010-6
6
Loading...
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use