JLG 4017PS Service Manual

An Oshkosh Corporation Company

Service Manual

Models

3706PS, 3707PS,

4014PS, 4017PS

Agrovector

33.7, 37.6, 37.7

33.7, 37.6, 37.7,

3706PS, 3707PS & 4014PS

S/N 1160006593 & After

4017PS

S/N 1160006867 & After including

1160006594, 1160006604,
1160006748, 1160006752,

1160006755, 1160006756

31200800

Revised

October 3, 2014

EFFECTIVITY PAGE

March 6, 2013 - A - Original Issue Of Manual

March 11, 2013 - B - Revised page 9-5.

November 13, 2013 - C - Revised page 2-12, 5-2 thru 5-7, 7-9, 7-10, 7-11,8-17, 9-5 thru 9-10 thru 9-21, 9-48, 9-49,
9-79 thru 9-104.

October 3, 2014 - D - Revised Front Cover, pages 2-2 thru 2-12, 2-14, 2-16, 2-19, 3-3, 3-39, 5-3 thru 5-5, 5-14, 8-2,

8-6, 8-7, 8-10,8-19, 8-22, 8-23, 9-6, 9-9, 9-10, 9-19, 9-38, 9-42, 9-44, 9-45 and 9-49.

31200800 3706PS, 3707PS, 4014PS, 4017PS, 33.7, 37.6, 37.7

i

EFFECTIVITY PAGE

ii

3706PS, 3707PS, 4014PS, 4017PS, 33.7, 37.6, 37.7 31200800

SECTION CONTENTS

Section Subject Page

Section 1

Safety Practices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1

1.1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2

1.2 Disclaimer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2

1.3 Operation & Safety Manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2

1.4 Do Not Operate Tags . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2

1.5 Safety Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2

1.6 Safety Alert System and Signal Words . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2

1.7 Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-3

1.8 Safety Decals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-4

Section 2

General Information and Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-1

2.1 Replacement Parts and Warranty Information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-2

2.2 Thread Locking Compound . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-2

2.3 Torque Charts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-3

2.4 Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-14

2.5 Fluids, Lubricants and Capacities . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-18

2.6 Service and Maintenance Schedules. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-21

2.7 Lubrication Schedule . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-25

Section 3

Boom . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-1

3.1 Boom System Component Terminology - 3706PS, 3707PS, 33.7, 36.6 & 37.7. . . . . . . 3-3

3.2 Boom System - Two Section . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-4

3.3 Boom Assembly Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-4

3.4 Boom System Component Terminology - 4014PS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-10

3.5 Boom System - Three Section . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-11

3.6 Boom Assembly Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-11

3.7 Boom Chain Removal/Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-17

3.8 Extend/Retract, Tilt and Auxiliary Circuit Hose Removal/Installation . . . . . . . . . . . . . . . 3-19

3.9 Extend/Retract Cylinder Removal/Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-20

3.10 Boom Sections Adjustment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-21

3.11 Boom System Component Terminology - 4017PS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-22

3.12 Boom System - Four Section Boom. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-23

3.13 Boom Assembly Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-23

3.14 Boom Chain Removal/Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-31

3.15 Boom Sections Adjustment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-32

3.16 Boom Extend and Retract Chains - 4014PS & 4017PS . . . . . . . . . . . . . . . . . . . . . . . . 3-33

3.17 Boom Wear Pads . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-38

3.18 Quick Coupler . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-39

3.19 Forks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-40

3.20 Boom Prop (If Equipped) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-40

3.21 Emergency Boom Lowering Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-41

3.22 Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-43

3706PS, 3707PS, 4014PS, 4017PS, 33.7, 37.6, 37.7

i

Section Subject Page

Section 4

Cab and Covers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-1

4.1 Operator Cab and Covers Component Terminology . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-2

4.2 Operator Cab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-3

4.3 Cab Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-3

4.4 Cab Removal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-9

4.5 Cab Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-11

Section 5

Axles, Drive Shafts, Wheels and Tires . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-1

5.1 Axle, Drive Shaft and Wheel Component Terminology . . . . . . . . . . . . . . . . . . . . . . . . . 5-2

5.2 Axle Serial Number . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-3

5.3 Axle Specifications and Maintenance Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-3

5.4 Axle Replacement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-3

5.5 Mechanical Park Brake . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-5

5.6 Hydraulic Park Brake . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-6

5.7 Brake Inspection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-8

5.8 Steering Angle Adjustment. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-8

5.9 Axle Assembly and Drive Shaft Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-9

5.10 Drive Shafts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-12

5.11 Wheels and Tires . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-13

5.12 Towing a Disabled Machine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-14

Section 6

Transmission . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6-1

6.1 Transmission Assembly Component Terminology . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-2

6.2 Transmission Serial Number . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-3

6.3 Specifications and Maintenance Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-3

6.4 Transmission Replacement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-3

6.5 Torque Convertor Diaphragm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-5

6.6 Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-5

Section 7

Engine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-1

7.1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-2

7.2 Engine Serial Number . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-2

7.3 Specifications and Maintenance Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-2

7.4 Engine Cooling System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-4

7.5 Engine Electrical System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-7

7.6 Fuel System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7-7

7.7 Engine Exhaust System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-9

7.8 Air Cleaner Assembly. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-12

7.9 Engine Replacement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-13

7.10 Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7-15

ii

3706PS, 3707PS, 4014PS, 4017PS, 33.7, 37.6, 37.7

Section Subject Page

Section 8

Hydraulic System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-1

8.1 Hydraulic Component Terminology . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-2

8.2 Safety Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-3

8.3 Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-3

8.4 Hydraulic Pressure Diagnosis . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-3

8.5 Hydraulic Circuits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8-4

8.6 Hydraulic Schematics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-6

8.7 Hydraulic Reservoir . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-11

8.8 Engine Implement Pump . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-13

8.9 Auxiliary Pump (Platform Equipped Models Only) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-14

8.10 Control Valves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-14

8.11 Hydraulic Cylinders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-20

8.12 Boom Ride Control (3706PS, 3707PS, 33.7, 37.6 & 37.7 - If Equipped). . . . . . . . . . . . 8-24

Section 9

Electrical System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-1

9.1 Electrical Component Terminology . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-3

9.2 Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-4

9.3 Safety Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-4

9.4 Keypad and Display Screen. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-4

9.5 Software Level 2 Accessibility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-5

9.6 Operator Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9-11

9.7 Fuses and Relays . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-13

9.8 Electrical System Schematics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-16

9.9 Circuit Breakdowns . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-28

9.10 Engine Start Circuit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9-30

9.11 Window Wiper/Washer Windshield Wiper Motor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-32

9.12 Solenoids, Sensors and Senders. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-34

9.13 Dash Switches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9-39

9.14 Platform Interlock Checks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-41

9.15 Platform Load System Check . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-41

9.16 Load Stability Indicator (LSI) (CE & AUS) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-42

9.17 Hand Held Analyzer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-47

9.18 Fault Codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-50

3706PS, 3707PS, 4014PS, 4017PS, 33.7, 37.6, 37.7

iii

Section Subject Page

iv

3706PS, 3707PS, 4014PS, 4017PS, 33.7, 37.6, 37.7

Section 1

Safety Practices

Contents

PARAGR APH TITLE PAGE

1.1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2

1.2 Disclaimer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2

1.3 Operation & Safety Manual. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2

1.4 Do Not Operate Tags. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2

1.5 Safety Information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2

1.6 Safety Alert System and Signal Words . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2

1.7 Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-3

1.7.1 Personal Hazards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-3

1.7.2 Equipment Hazards. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-3

1.7.3 General Hazards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-3

1.7.4 Operational Hazards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-4

1.8 Safety Decals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-4

3706PS, 3707PS, 4014PS, 4017PS, 33.7, 37.6, 37.7

1-1

Safety Practices

1.1 INTRODUCTION

This service manual provides general directions for
accomplishing service and repair procedures. Following
the procedures in this manual will help assure safety and
equipment reliability.

Read, understand and follow the information in this
manual, and obey all locally approved safety practices,
procedures, rules, codes, regulations and laws.

These instructions cannot cover all details or variations in
the equipment, procedures, or processes described, nor
provide directions for meeting every possible contingency
during operation, maintenance, or testing. When additional
information is desired consult the local JLG dealer.

Many factors contribute to unsafe conditions: carelessness,
fatigue, overload, inattentiveness, unfamiliarity, even
drugs and alcohol, among others. For optimal safety,
encourage everyone to think, and to act, safely.

Appropriate service methods and proper repair
procedures are essential for the safety of the individual
doing the work, for the safety of the operator, and for the
safe, reliable operation of the machine. All references to
the right side, left side, front and rear are given from the
operator seat looking in a forward direction.

Supplementary information is available from the
manufacturer in the form of Service Bulletins, Service
Campaigns, Service Training Schools, the service
website, other literature, and through updates to the
manual itself.

1.4 DO NOT OPERATE TAGS

Place Do Not Operate Tags on the ignition key switch and
the steering wheel before attempting to perform any
service or maintenance. Remove key and disconnect
battery leads.

1.5 SAFETY INFORMATION

To avoid possible death or injury, carefully read,
understand and comply with all safety messages.

In the event of an accident, know where to obtain medical
assistance and how to use a first aid kit and fire
extinguisher/fire suppression system. Keep emergency
telephone numbers (fire department, ambulance, rescue
squad/paramedics, police department, etc.) nearby. If
working alone, check with another person routinely to
help assure personal safety.

1.6 SAFETY ALERT SYSTEM AND SIGNAL WORDS

DANGER

DANGER indicates an imminently hazardous situation

which, if not avoided, will result in death or serious injury.

1.2 DISCLAIMER

All information in this manual is based on the latest
product information available at the time of publication.
The manufacturer reserves the right to make changes
and improvements to its products, and to discontinue the
manufacture of any product, at its discretion at any time
without public notice or obligation.

1.3 OPERATION & SAFETY MANUAL

The mechanic must not operate the machine until the
Operation & Safety Manual has been read and
understood, training has been accomplished and
operation of the machine has been completed under the
supervision of an experienced and qualified operator.

An Operation & Safety Manual is supplied with each
machine and must be kept in the manual holder located
in the cab. In the event that the Operation & Safety
Manual is missing, consult the local JLG dealer before
proceeding.

1-2

WARNING

WARNING indicates a potentially hazardous situation

which, if not avoided, could result in death or serious
injury.

CAUTION

CAUTION indicates a potentially hazardous situation

which, if not avoided, may result in minor or moderate
injury.

3706PS, 3707PS, 4014PS, 4017PS, 33.7, 37.6, 37.7

Safety Practices

1.7 SAFETY INSTRUCTIONS

Following are general safety statements to consider before
performing maintenance procedures on the telehandler.
Additional statements related to specific tasks and
procedures are located throughout this manual and are
listed prior to any work instructions to provide safety
information before the potential of a hazard occurs.

For all safety messages, carefully read, understand and
follow the instructions before

1.7.1 Personal Hazards

PERSONAL SAFETY GEAR: Wear all the protective
clothing and personal safety gear necessary to perform
the job safely. This might include heavy gloves, safety
glasses or goggles, filter mask or respirator, safety shoes
or a hard hat.

LIFTING: NEVER lift a heavy object without the help of at
least one assistant or a suitable sling and hoist.

1.7.2 Equipment Hazards

LIFTING OF EQUIPMENT: Before using any lifting
equipment (chains, slings, brackets, hooks, etc.), verify
that it is of the proper capacity, in good working order, and
is properly attached.

NEVER stand or otherwise become positioned under a
suspended load or under raised equipment. The load or
equipment could fall or tip.

DO NOT use a hoist, jack or jack stands only to support
equipment. Always support equipment with the proper
capacity blocks or stands properly rated for the load.

HAND TOOLS: Always use the proper tool for the job;
keep tools clean and in good working order, and use
special service tools only as recommended.

proceeding.

1.7.3 General Hazards

SOLVENTS: Only use approved solvents that are known
to be safe for use.

HOUSEKEEPING: Keep the work area and operator cab
clean, and remove all hazards (debris, oil, tools, etc.).

FIRST AID: Immediately clean, dress and report all injuries
(cuts, abrasions, burns, etc.), no matter how minor the
injury may seem. Know the location of a First Aid Kit, and
know how to use it.

CLEANLINESS: Wear eye protection, and clean all
components with a high pressure or steam cleaner before
attempting service.

When removing hydraulic components, plug hose ends
and connections to prevent excess leakage and
contamination. Place a suitable catch basin beneath the
machine to capture fluid run off.

It is good practice to avoid pressure-washing electrical/
electronic components. In the event pressure-washing
the machine is needed, ensure the machine is shut down
before pressure-washing. Should pressure-washing be
utilized to wash areas containing electrical/electronic
components, JLG recommends a maximum pressure of
52 bar (750 psi) at a minimum distance of 30,5 cm (12 in)
away from these components. If electrical/electronic
components are sprayed, spraying must not be direct and
for brief time periods to avoid heavy saturation,

Check and obey all Federal, State and/or Local
regulations regarding waste storage, disposal and
recycling.

3706PS, 3707PS, 4014PS, 4017PS, 33.7, 37.6, 37.7

1-3

Safety Practices

1.7.4 Operational Hazards

ENGINE: Stop the engine before performing any service
unless specifically instructed otherwise.

VENTILATION: Avoid prolonged engine operation in
enclosed areas without adequate ventilation.

SOFT SURFACES AND SLOPES: NEVER work on a
machine that is parked on a soft surface or slope. The
machine must be on a hard level surface, with the wheels
blocked before performing any service.

FLUID TEMPERATURE: NEVER work on a machine
when the engine, cooling or hydraulic systems are hot.
Hot components and fluids can cause severe burns.
Allow systems to cool before proceeding.

FLUID PRESSURE: Before loosening any hydraulic or
diesel fuel component, hose or tube, turn the engine
OFF. Wear heavy, protective gloves and eye protection.
NEVER check for leaks using any part of your body; use
a piece of cardboard or wood instead. If injured, seek
medical attention immediately. Diesel fluid leaking under
pressure can explode. Hydraulic fluid and diesel fuel
leaking under pressure can penetrate the skin, cause
infection, gangrene and other serious personal injury.

Refer to the engine manufacturers manual for specific
details concerning the fuel system.

Relieve all pressure before disconnecting any
component, part, line or hose. Slowly loosen parts and
allow release of residual pressure before removing any
part or component. Before starting the engine or applying
pressure, use components, parts, hoses and pipes that
are in good condition, connected properly and are
tightened to the proper torque. Capture fluid in an
appropriate container and dispose of in accordance with
prevailing environmental regulations.

COOLANT SYSTEM CAP: The cooling system is under
pressure, and escaping coolant can cause severe burns
and eye injury. To prevent personal injury, NEVER
remove the coolant system cap while the cooling system
is hot. Wear safety glasses. Turn the coolant system cap
to the first stop and allow pressure to escape before
removing the cap completely. Failure to follow the safety
practices could result in death or serious injury.

Properly disconnect battery(s) prior to service the fuel or
hydraulic systems.

FLUID FLAMABILTITY: DO NOT service the fuel or
hydraulic systems near an open flame, sparks or smoking
materials.

NEVER drain or store fluids in an open container. Engine
fuel and hydraulic fluid are flammable and can cause a
fire and/or explosion.

DO NOT mix gasoline or alcohol with diesel fuel. The
mixture can cause an explosion.

PRESSURE TESTING: When conducting any test, only
use test equipment that is correctly calibrated and in good
condition. Use the correct equipment in the proper
manner, and make changes or repairs as indicated by the
test procedure to achieve the desired result.

LEAVING MACHINE: Lower the forks or attachment to
the ground before leaving the machine.

TIRES: Always keep tires inflated to the proper pressure
to help prevent tipover. DO NOT over inflate tires.

NEVER use mismatched tire types, sizes or ply ratings.
Always use matched sets according to machine
specifications.

MAJOR COMPONENTS: Never alter, remove, or
substitute any items such as counterweights, tires,
batteries or other items that may reduce or affect the
overall weight or stability of the machine.

BATTERY: DO NOT charge a frozen battery.Charging a
frozen battery may cause it to explode. Allow the battery
to thaw before jump starting or connecting a battery
charger.

1.8 SAFETY DECALS

Check that all safety decals are present and readable on
the machine. Refer to the Operation & Safety Manual
supplied with machine for information.

1-4

3706PS, 3707PS, 4014PS, 4017PS, 33.7, 37.6, 37.7

Section 2

General Information and Specifications

Contents

PARAGR APH TITLE PAGE

2.1 Replacement Parts and Warranty Information . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-2

2.2 Thread Locking Compound . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-2

2.3 Torque Charts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-3

2.3.1 SAE Fastener Torque Chart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-3

2.3.2 Metric Fastener Torque Chart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-9

2.3.3 Hydraulic Hose Torque Chart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-13

2.4 Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-14

2.4.1 Travel Speeds . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-14

2.4.2 Hydraulic Cylinder Performance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-14

2.4.3 Platform Hydraulic Performance Specifications . . . . . . . . . . . . . . . . . . . . 2-14

2.4.4 Electrical System. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-15

2.4.5 Engine Fan Speed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-15

2.4.6 Engine Performance Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-15

2.4.7 Transmission Performance Specifications . . . . . . . . . . . . . . . . . . . . . . . . 2-15

2.4.8 Tires . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-16

2.5 Fluids, Lubricants and Capacities . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-18

2.5.1 3706PS, 3707PS, 4014PS & 4017PS. . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-18

2.5.2 33.7, 37.6 & 37.7. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-19

2.6 Service and Maintenance Schedules . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-21

2.6.1 10 & 1st 50 Hour . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-21

2.6.2 50 & 1st 250 Hour . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-22

2.6.3 250 & 500 Hour . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-23

2.6.4 1000, 1500 & 3000 Hour . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-24

2.7 Lubrication Schedule . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-25

2.7.1 50 Hour Lubrication Schedule . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-25

2.7.2 500 Hour Lubrication Schedule . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-26

3706PS, 3707PS, 4014PS, 4017PS, 33.7, 37.6, 37.7

2-1

General Information and Specifications

MZ6510

1

2.1 REPLACEMENT PARTS AND WARRANTY INFORMATION

Before ordering parts or initiating service inquiries, make
note of the machine serial number. The machine serial
number plate (1) is located on the frame behind the right
front tire.

Note: The replacement of any part on this machine with
any other than factory authorized replacement parts can
adversely affect the performance, durability, or safety of
the machine, and will void the warranty. JLG disclaims
liability for any claims or damages, whether regarding
property damage, personal injury or death arising out of
the use of unauthorized replacement parts.

2.2 THREAD LOCKING COMPOUND

TM

242

TM

243

TM

271

TM

262

121.

®

ND Industries Description

Vibra-TITETM121

Vibra-TITETM122

Vibra-TITETM140

Vibra-TITETM131

Medium Strength (Blue)

Medium Strength (Blue)

High Strength (Red)

Medium - High Strength (Red)

JLG P/N

0100011

1001095650

0100019

0100071

Loctite

Loctite® 243TM can be substituted in place of Loctite®

TM

. Vibra-TITETM 122 can be substituted in place of

242
Vibra-TITE

TM

A warranty registration form must be filled out by the local
JLG dealer.

Registration activates the warranty period and helps to
assure that warranty claims are promptly processed to
guarantee full warranty service.

2-2

3706PS, 3707PS, 4014PS, 4017PS, 33.7, 37.6, 37.7

General Information and Specifications

2.3 TORQUE CHARTS

2.3.1 SAE Fastener Torque Chart

Values for Zinc Yellow Chromate Fasteners (Ref 4150707)

SAE GRADE 5 BOLTS & GRADE 2 NUTS

T o r q u e

Size TPI Bolt Dia

In Sq In LB I N - L B [N.m] I N - L B [N.m] I N - L B [N.m] I N - L B [N.m]

4 40 0.1120 0.00604 380 8 0.9 6 0.7

48 0.1120 0.00661 420 9 1.0 7 0.8

6 32 0.1380 0.00909 580 16 1.8 12 1.4

40 0.1380 0.01015 610 18 2.0 13 1.5

8 32 0.1640 0.01400 900 30 3.4 22 2.5

36 0.1640 0.01474 940 31 3.5 23 2.6

10 24 0.1900 0.01750 1120 43 4.8 32 3.5

32 0.1900 0.02000 1285 49 5.5 36 4

1/4 20 0.2500 0.0318 2020 96 10.8 75 9 105 12

28 0.2500 0.0364 2320 120 13.5 86 10 135 15

In Sq In LB F T - LB [N.m] FT-LB [N.m] F T - LB [N.m] F T -L B [N.m]

5/16 18 0.3125 0.0524 3340 17 23 13 18 19 26 16 22

24 0.3125 0.0580 3700 19 26 14 19 21 29 17 23

3/8 16 0.3750 0.0775 4940 30 41 23 31 35 48 28 38

24 0.3750 0.0878 5600 35 47 25 34 40 54 32 43

7/16 14 0.4375 0.1063 6800 50 68 35 47 55 75 45 61

20 0.4375 0.1187 7550 55 75 40 54 60 82 50 68

1/2 13 0.5000 0.1419 9050 75 102 55 75 85 116 68 92

20 0.5000 0.1599 10700 90 122 65 88 100 136 80 108

9/16 12 0.5625 0.1820 11600 110 149 80 108 120 163 98 133

18 0.5625 0.2030 12950 120 163 90 122 135 184 109 148

5/8 11 0.6250 0.2260 14400 150 203 110 149 165 224 135 183

18 0.6250 0.2560 16300 170 230 130 176 190 258 153 207

3/4 10 0.7500 0.3340 21300 260 353 200 271 285 388 240 325

16 0.7500 0.3730 23800 300 407 220 298 330 449 268 363

7/8 9 0.8750 0.4620 29400 430 583 320 434 475 646 386 523

14 0.8750 0.5090 32400 470 637 350 475 520 707 425 576

1 8 1.0000 0.6060 38600 640 868 480 651 675 918 579 785

12 1.0000 0.6630 42200 700 949 530 719 735 1000 633 858

1 1/8 7 1.1250 0.7630 42300 800 1085 600 813 840 1142 714 968

12 1.1250 0.8560 47500 880 1193 660 895 925 1258 802 1087

1 1/4 7 1.2500 0.9690 53800 1120 1518 840 1139 1175 1598 1009 1368

12 1.2500 1.0730 59600 1240 1681 920 1247 1300 1768 1118 1516

1 3/8 6 1.3750 1.1550 64100 1460 1979 1100 1491 1525 2074 1322 1792

12 1.3750 1.3150 73000 1680 2278 1260 1708 1750 2380 1506 2042

1 1/2 6 1.5000 1.4050 78000 1940 2630 1460 1979 2025 2754 1755 2379

12 1.5000 1.5800 87700 2200 2983 1640 2224 2300 3128 1974 2676

Tensile

Stress Area

Clamp

Load

T o r q u e

(Dry)

T o r q u e

Lubricated

(Loctite® 242

TM

or Vibra-TITE

111 or 140)

or 271TM

TM

T o r q u e

(Loctite® 262

Vibra-TITE

TM

TM

131)

or

NOTES: 1. THESE TORQUE VALUES DO NOT APPLY TO CADMIUM PLATED FASTENERS 5000059K

2. ALL TORQUE VALUES ARE STATIC TORQUE MEASURED PER STANDARD AUDIT METHODS TOLERANCE = ±10%

3. * ASSEMBLY USES HARDENED WASHER

3706PS, 3707PS, 4014PS, 4017PS, 33.7, 37.6, 37.7

2-3

General Information and Specifications

2.3.1 SAE Fastener Torque Chart (Continued)

Values for Zinc Yellow Chromate Fasteners (Ref 4150707)

SAE GRADE 8 (HEX HD) BOLTS & GRADE 8 NUTS*

Vibra-TITE

T o r q u e

TM

or 271TM or

TM

111 or 140)

K=0.18

Size TPI Bolt Dia

In Sq In LB I N - L B [N.m] I N - LB [N.m] I N - L B [N.m]

4 40 0.1120 0.00604

48 0.1120 0.00661

6 32 0.1380 0.00909

40 0.1380 0.01015

8 32 0.1640 0.01400

36 0.1640 0.01474 1320 43 5

10 24 0.1900 0.01750 1580 60 7

32 0.1900 0.02000 1800 68 8

1/4 20 0.2500 0.0318 2860 143 16 129 15

28 0.2500 0.0364 3280 164 19 148 17

In Sq In LB FT-LB [N.m] FT-LB [N.m] FT-LB [N.m]

5/16 18 0.3125 0.0524 4720 25 35 20 25 20 25

24 0.3125 0.0580 5220 25 35 25 35 20 25

3/8 16 0.3750 0.0775 7000 45 60 40 55 35 50

24 0.3750 0.0878 7900 50 70 45 60 35 50

7/16 14 0.4375 0.1063 9550 70 95 65 90 50 70

20 0.4375 0.1187 10700 80 110 70 95 60 80

1/2 13 0.5000 0.1419 12750 105 145 95 130 80 110

20 0.5000 0.1599 14400 120 165 110 150 90 120

9/16 12 0.5625 0.1820 16400 155 210 140 190 115 155

18 0.5625 0.2030 18250 170 230 155 210 130 175

5/8 11 0.6250 0.2260 20350 210 285 190 260 160 220

18 0.6250 0.2560 23000 240 325 215 290 180 245

3/4 10 0.7500 0.3340 30100 375 510 340 460 280 380

16 0.7500 0.3730 33600 420 570 380 515 315 430

7/8 9 0.8750 0.4620 41600 605 825 545 740 455 620

14 0.8750 0.5090 45800 670 910 600 815 500 680

1 8 1.0000 0.6060 51500 860 1170 770 1045 645 875

12 1.0000 0.6630 59700 995 1355 895 1215 745 1015

1 1/8 7 1.1250 0.7630 68700 1290 1755 1160 1580 965 1310

12 1.1250 0.8560 77000 1445 1965 1300 1770 1085 1475

1 1/4 7 1.2500 0.9690 87200 1815 2470 1635 2225 1365 1855

12 1.2500 1.0730 96600 2015 2740 1810 2460 1510 2055

1 3/8 6 1.3750 1.1550 104000 2385 3245 2145 2915 1785 2430

12 1.3750 1.3150 118100 2705 3680 2435 3310 2030 2760

1 1/2 6 1.5000 1.4050 126500 3165 4305 2845 3870 2370 3225

12 1.5000 1.5800 142200 3555 4835 3200 4350 2665 3625

Tensile Stress

Area

Clamp Load

Torque

( D r y o r L o c t i t e ® 2 6 3 )

K=0.20

(Loctite® 242

Torque

(Loctite® 262

Vibra-TITE

TM

K=0.15

TM

or

131)

NOTES: 1. THESE TORQUE VALUES DO NOT APPLY TO CADMIUM PLATED FASTENERS 5000059K

2. ALL TORQUE VALUES ARE STATIC TORQUE MEASURED PER STANDARD AUDIT METHODS TOLERANCE = ±10%

3. * ASSEMBLY USES HARDENED WASHER

2-4

3706PS, 3707PS, 4014PS, 4017PS, 33.7, 37.6, 37.7

General Information and Specifications

2.3.1 SAE Fastener Torque Chart (Continued)

Values for Magni Coating Fasteners (Ref 4150701)

SAE GRADE 5 BOLTS & GRADE 2 NUTS

Vibra-TITE

T o r q u e

TM

or 271TM or

TM

111 or 140)

K=0.16

Size TPI Bolt Dia

In Sq In LB I N - L B [N.m] IN - L B [N.m] I N - L B [N.m]

4 40 0.1120 0.00604 380 7 0.8

48 0.1120 0.00661 420 8 0.9

6 32 0.1380 0.00909 580 14 1.5

40 0.1380 0.01015 610 14 1.6

8 32 0.1640 0.01400 900 25 2.8

36 0.1640 0.01474 940 26 2.9

10 24 0.1900 0.01750 1120 36 4.1

32 0.1900 0.02000 1285 42 4.7

1/4 20 0.2500 0.0318 2020 86 9.7 80 9

28 0.2500 0.0364 2320 99 11.1 95 11

In Sq In LB FT-LB [N.m] FT-LB [N.m] FT-LB [N.m]

5/16 18 0.3125 0.0524 3340 15 20 14 19 15 20

24 0.3125 0.0580 3700 15 20 15 21 15 20

3/8 16 0.3750 0.0775 4940 25 35 25 34 25 34

24 0.3750 0.0878 5600 30 40 28 38 25 34

7/16 14 0.4375 0.1063 6800 40 55 40 54 35 48

20 0.4375 0.1187 7550 45 60 44 60 40 54

1/2 13 0.5000 0.1419 9050 65 90 60 82 55 75

20 0.5000 0.1599 10700 75 100 71 97 65 88

9/16 12 0.5625 0.1820 11600 90 120 87 118 80 109

18 0.5625 0.2030 12950 105 145 97 132 90 122

5/8 11 0.6250 0.2260 14400 130 175 120 163 115 156

18 0.6250 0.2560 16300 145 195 136 185 125 170

3/4 10 0.7500 0.3340 21300 225 305 213 290 200 272

16 0.7500 0.3730 23800 255 345 238 324 225 306

7/8 9 0.8750 0.4620 29400 365 495 343 466 320 435

14 0.8750 0.5090 32400 400 545 378 514 355 483

1 8 1.0000 0.6060 38600 545 740 515 700 480 653

12 1.0000 0.6630 42200 600 815 563 765 530 721

1 1/8 7 1.1250 0.7630 42300 675 920 635 863 595 809

12 1.1250 0.8560 47500 755 1025 713 969 670 911

1 1/4 7 1.2500 0.9690 53800 955 1300 897 1219 840 1142

12 1.2500 1.0730 59600 1055 1435 993 1351 930 1265

1 3/8 6 1.3750 1.1550 64100 1250 1700 1175 1598 1100 1496

12 1.3750 1.3150 73000 1420 1930 1338 1820 1255 1707

1 1/2 6 1.5000 1.4050 78000 1660 2260 1560 2122 1465 1992

12 1.5000 1.5800 87700 1865 2535 1754 2385 1645 2237

Tensile Stress

Area

Clamp Load

Torque

(Dry)

K=0.17

(Loctite® 242

Torque

(Loctite® 262

Vibra-TITE

TM

K=0.15

TM

or

131)

NOTES: 1. THESE TORQUE VALUES DO NOT APPLY TO CADMIUM PLATED FASTENERS 5000059K

2. ALL TORQUE VALUES ARE STATIC TORQUE MEASURED PER STANDARD AUDIT METHODS TOLERANCE = ±10%

3. * ASSEMBLY USES HARDENED WASHER

3706PS, 3707PS, 4014PS, 4017PS, 33.7, 37.6, 37.7

2-5

General Information and Specifications

2.3.1 SAE Fastener Torque Chart (Continued)

Values for Magni Coating Fasteners (Ref 4150701)

SAE GRADE 8 (HEX HD) BOLTS & GRADE 8 NUTS*

Vibra-TITE

T o r q u e

TM

or 271TM or

TM

111 or 140)

K=0.16

Size TPI Bolt Dia

In Sq In LB I N - L B [N.m] IN - L B [N.m] I N - L B [N.m]

4 40 0.1120 0.00604

48 0.1120 0.00661

6 32 0.1380 0.00909

40 0.1380 0.01015

8 32 0.1640 0.01400

36 0.1640 0.01474 1320 37 4

10 24 0.1900 0.01750 1580 51 6

32 0.1900 0.02000 1800 58 7

1/4 20 0.2500 0.0318 2860 122 14 114 13

28 0.2500 0.0364 3280 139 16 131 15

In Sq In LB FT-LB [N.m] FT-LB [N.m] FT-LB [N.m]

5/16 18 0.3125 0.0524 4720 20 25 20 25 20 25

24 0.3125 0.0580 5220 25 35 20 25 20 25

3/8 16 0.3750 0.0775 7000 35 50 35 50 35 50

24 0.3750 0.0878 7900 40 55 40 55 35 50

7/16 14 0.4375 0.1063 9550 60 80 55 75 50 70

20 0.4375 0.1187 10700 65 90 60 80 60 80

1/2 13 0.5000 0.1419 12750 90 120 85 115 80 110

20 0.5000 0.1599 14400 100 135 95 130 90 120

9/16 12 0.5625 0.1820 16400 130 175 125 170 115 155

18 0.5625 0.2030 18250 145 195 135 185 130 175

5/8 11 0.6250 0.2260 20350 180 245 170 230 160 220

18 0.6250 0.2560 23000 205 280 190 260 180 245

3/4 10 0.7500 0.3340 30100 320 435 300 410 280 380

16 0.7500 0.3730 33600 355 485 335 455 315 430

7/8 9 0.8750 0.4620 41600 515 700 485 660 455 620

14 0.8750 0.5090 45800 570 775 535 730 500 680

1 8 1.0000 0.6060 51500 730 995 685 930 645 875

12 1.0000 0.6630 59700 845 1150 795 1080 745 1015

1 1/8 7 1.1250 0.7630 68700 1095 1490 1030 1400 965 1310

12 1.1250 0.8560 77000 1225 1665 1155 1570 1085 1475

1 1/4 7 1.2500 0.9690 87200 1545 2100 1455 1980 1365 1855

12 1.2500 1.0730 96600 1710 2325 1610 2190 1510 2055

1 3/8 6 1.3750 1.1550 104000 2025 2755 1905 2590 1785 2430

12 1.3750 1.3150 118100 2300 3130 2165 2945 2030 2760

1 1/2 6 1.5000 1.4050 126500 2690 3660 2530 3440 2370 3225

12 1.5000 1.5800 142200 3020 4105 2845 3870 2665 3625

Tensile Stress

Area

Clamp Load

Torque

( D r y o r L o c t i t e ® 2 6 3 )

K=0.17

(Loctite® 242

Torque

(Loctite® 262

Vibra-TITE

TM

K=0.15

TM

or

131)

NOTES: 1. THESE TORQUE VALUES DO NOT APPLY TO CADMIUM PLATED FASTENERS 5000059K

2. ALL TORQUE VALUES ARE STATIC TORQUE MEASURED PER STANDARD AUDIT METHODS TOLERANCE = ±10%

3. * ASSEMBLY USES HARDENED WASHER

2-6

3706PS, 3707PS, 4014PS, 4017PS, 33.7, 37.6, 37.7

General Information and Specifications

2.3.1 SAE Fastener Torque Chart (Continued)

Values for Magni Coating Fasteners (Ref 4150701)

SOCKET HEAD CAP SCREWS

T o r q u e

Size TPI Bolt Dia

In Sq In LB I N - L B [N.m] IN - L B [N.m] I N - L B [N.m]

4 40 0.1120 0.00604

48 0.1120 0.00661

6 32 0.1380 0.00909

40 0.1380 0.01015

8 32 0.1640 0.01400

36 0.1640 0.01474

10 24 0.1900 0.01750

32 0.1900 0.02000

1/4 20 0.2500 0.0318 2860 122 14 114 13

28 0.2500 0.0364 3280 139 16 131 15

In Sq In LB FT-LB [N.m] FT-LB [N.m] FT-LB [N.m]

5/16 18 0.3125 0.0524 4720 20 25 20 25 20 25

24 0.3125 0.0580 5220 25 35 20 25 20 25

3/8 16 0.3750 0.0775 7000 35 50 35 50 35 50

24 0.3750 0.0878 7900 40 55 40 55 35 50

7/16 14 0.4375 0.1063 9550 60 80 55 75 50 70

20 0.4375 0.1187 10700 65 90 60 80 60 80

1/2 13 0.5000 0.1419 12750 90 120 85 115 80 110

20 0.5000 0.1599 14400 100 135 95 130 90 120

9/16 12 0.5625 0.1820 16400 130 175 125 170 115 155

18 0.5625 0.2030 18250 145 195 135 185 130 175

5/8 11 0.6250 0.2260 20350 180 245 170 230 160 220

18 0.6250 0.2560 23000 205 280 190 260 180 245

3/4 10 0.7500 0.3340 30100 320 435 300 415 280 380

16 0.7500 0.3730 33600 355 485 335 455 315 430

7/8 9 0.8750 0.4620 41600 515 700 485 660 455 620

14 0.8750 0.5090 45800 570 775 535 730 500 680

1 8 1.0000 0.6060 51500 730 995 685 930 645 875

12 1.0000 0.6630 59700 845 1150 795 1080 745 1015

1 1/8 7 1.1250 0.7630 68700 1095 1490 1030 1400 965 1310

12 1.1250 0.8560 77000 1225 1665 1155 1570 1085 1475

1 1/4 7 1.2500 0.9690 87200 1545 2100 1455 1980 1365 1855

12 1.2500 1.0730 96600 1710 2325 1610 2190 1510 2055

1 3/8 6 1.3750 1.1550 104000 2025 2755 1905 2590 1785 2430

12 1.3750 1.3150 118100 2300 3130 2165 2945 2030 2760

1 1/2 6 1.5000 1.4050 126500 2690 3660 2530 3440 2370 3225

12 1.5000 1.5800 142200 3020 4105 2845 3870 2665 3625

Tensile Stress

Area

Clamp Load

See Note 4

Torque

(Dry) K=0.17

(Loctite® 242

Vibra-TITE

Precoat® 85 K=0.16

TM

or 271TM or

TM

111 or 140) or

Torque

(Loctite® 262

Vibra-TITE

TM

K=0.15

TM

or

131)

NOTES: 1. THESE TORQUE VALUES DO NOT APPLY TO CADMIUM PLATED FASTENERS 5000059K

2. ALL TORQUE VALUES ARE STATIC TORQUE MEASURED PER STANDARD AUDIT METHODS TOLERANCE = ±10%

3. * ASSEMBLY USES HARDENED WASHER

4. CLAMP LOAD LISTED FOR SHCS IS SAME AS GRADE 8 OR CLASS 10.9 AND DOES NOT REPRESENT FULL STRENGTH CAPABILITY OF SHCS.
IF HIGHER LOAD IS REQUIRED, ADDITIONAL TESTING IS REQUIRED.

3706PS, 3707PS, 4014PS, 4017PS, 33.7, 37.6, 37.7

2-7

General Information and Specifications

2.3.1 SAE Fastener Torque Chart (Continued)

Values for Zinc Yellow Chromate Fasteners (Ref 4150707)*

SOCKET HEAD CAP SCREWS

T o r q u e

Size TPI Bolt Dia

In Sq In LB I N - L B [N.m] IN - L B [N.m] I N - L B [N.m]

4 40 0.1120 0.00604

48 0.1120 0.00661

6 32 0.1380 0.00909

40 0.1380 0.01015

8 32 0.1640 0.01400

36 0.1640 0.01474

10 24 0.1900 0.01750

32 0.1900 0.02000

1/4 20 0.2500 0.0318 2860 122 14 114 13

28 0.2500 0.0364 3280 139 16 131 15

In Sq In LB FT-LB [N.m] FT-LB [N.m] FT-LB [N.m]

5/16 18 0.3125 0.0524 4720 20 25 20 25 20 25

24 0.3125 0.0580 5220 25 35 20 25 20 25

3/8 16 0.3750 0.0775 7000 35 50 35 50 35 50

24 0.3750 0.0878 7900 40 55 40 55 35 50

7/16 14 0.4375 0.1063 9550 60 80 55 75 50 70

20 0.4375 0.1187 10700 65 90 60 80 60 80

1/2 13 0.5000 0.1419 12750 90 120 85 115 80 110

20 0.5000 0.1599 14400 100 135 95 130 90 120

9/16 12 0.5625 0.1820 16400 130 175 125 170 115 155

18 0.5625 0.2030 18250 145 195 135 185 130 175

5/8 11 0.6250 0.2260 20350 180 245 170 230 160 220

18 0.6250 0.2560 23000 205 280 190 260 180 245

3/4 10 0.7500 0.3340 30100 320 435 300 415 280 380

16 0.7500 0.3730 33600 355 485 335 455 315 430

7/8 9 0.8750 0.4620 41600 515 700 485 660 455 620

14 0.8750 0.5090 45800 570 775 535 730 500 680

1 8 1.0000 0.6060 51500 730 995 685 930 645 875

12 1.0000 0.6630 59700 845 1150 795 1080 745 1015

1 1/8 7 1.1250 0.7630 68700 1095 1490 1030 1400 965 1310

12 1.1250 0.8560 77000 1225 1665 1155 1570 1085 1475

1 1/4 7 1.2500 0.9690 87200 1545 2100 1455 1980 1365 1855

12 1.2500 1.0730 96600 1710 2325 1610 2190 1510 2055

1 3/8 6 1.3750 1.1550 104000 2025 2755 1905 2590 1785 2430

12 1.3750 1.3150 118100 2300 3130 2165 2945 2030 2760

1 1/2 6 1.5000 1.4050 126500 2690 3660 2530 3440 2370 3225

12 1.5000 1.5800 142200 3020 4105 2845 3870 2665 3625

Tensile Stress

Area

Clamp Load

See Note 4

Torque

(Dry) K=0.17

(Loctite® 242
Vibra-TITE

Precoat® 85 K=0.16

TM

or 271TM or

TM

111 or 140) or

Torque

(Loctite® 262

Vibra-TITE

TM

K=0.15

TM

or

131)

NOTES: 1. THESE TORQUE VALUES DO NOT APPLY TO CADMIUM PLATED FASTENERS 5000059K

2. ALL TORQUE VALUES ARE STATIC TORQUE MEASURED PER STANDARD AUDIT METHODS TOLERANCE = ±10%

3. * ASSEMBLY USES HARDENED WASHER

4. CLAMP LOAD LISTED FOR SHCS IS SAME AS GRADE 8 OR CLASS 10.9 AND DOES NOT REPRESENT FULL STRENGTH CAPABILITY OF SHCS.
IF HIGHER LOAD IS REQUIRED, ADDITIONAL TESTING IS REQUIRED.

2-8

3706PS, 3707PS, 4014PS, 4017PS, 33.7, 37.6, 37.7

General Information and Specifications

2.3.2 Metric Fastener Torque Chart

Values for Zinc Yellow Chromate Fasteners (Ref 4150707)*

CLASS 8.8 METRIC (HEX/SOCKET HEAD) BOLTS CLASS 8 METRIC NUTS

T o r q u e

131)

TM

or

271

TM

Size Pitch

3 0.5 5.03 2.19 1.3 1.0 1.2 1.4

3.5 0.6 6.78 2.95 2.1 1.6 1.9 2.3

4 0.7 8.78 3.82 3.1 2.3 2.8 3.4

5 0.8 14.20 6.18 6.2 4.6 5.6 6.8

6 1 20.10 8.74 11 7.9 9.4 12

7 1 28.90 12.6 18 13 16 19

8 1.25 36.60 15.9 26 19 23 28

10 1.5 58.00 25.2 50 38 45 55

12 1.75 84.30 36.7 88 66 79 97

14 2 115 50.0 140 105 126 154

16 2 157 68.3 219 164 197 241

18 2.5 192 83.5 301 226 271 331

20 2.5 245 106.5 426 320 383 469

22 2.5 303 132.0 581 436 523 639

24 3 353 153.5 737 553 663 811

27 3 459 199.5 1080 810 970 1130

30 3.5 561 244.0 1460 1100 1320 1530

33 3.5 694 302.0 1990 1490 1790 2090

36 4 817 355.5 2560 1920 2300 2690

42 4.5 1120 487.0 4090 3070 3680 4290

Tensile Stress

Area

Sq mm KN [N.m] [N.m] [N.m]

Clamp Load

See Note 4

Torque

(Dry or Loctite® 263

TM

)

Torque (Lube)

(Loctite® 262

TM

271

or Vibra-TITE

T o r q u e

(Loctite® 242

TM

or Vibra-TITETM

111

or 141)

TM

or

NOTES: 1. THESE TORQUE VALUES DO NOT APPLY TO CADMIUM PLATED FASTENERS 5000059K

2. ALL TORQUE VALUES ARE STATIC TORQUE MEASURED PER STANDARD AUDIT METHODS TOLERANCE = ±10%

3. * ASSEMBLY USES HARDENED WASHER

4. CLAMP LOAD LISTED FOR SHCS IS SAME AS GRADE 8 OR CLASS 10.9 AND DOES NOT REPRESENT FULL STRENGTH CAPABILITY OF SHCS.
IF HIGHER LOAD IS REQUIRED, ADDITIONAL TESTING IS REQUIRED.

3706PS, 3707PS, 4014PS, 4017PS, 33.7, 37.6, 37.7

2-9

General Information and Specifications

2.3.2 Metric Fastener Torque Chart (Continued)

Values for Zinc Yellow Chromate Fasteners (Ref 4150707)*

CLASS 10.9 METRIC (HEX HEAD) BOLTS,

CLASS 10 METRIC NUTS CLASS 12.9 SOCKET HEAD CAP SCREWS M3 - M5*

T o r q u e

Size Pitch

3 0.5 5.03 3.13

3.5 0.6 6.78 4.22

4 0.7 8.78 5.47

5 0.8 14.20 8.85

6 1 20.10 12.5

7 1 28.90 18.0 25 23 19

8 1.25 36.60 22.8 37 33 27

10 1.5 58.00 36.1 70 65 55

12 1.75 84.30 52.5 125 115 95

14 2 115 71.6 200 180 150

16 2 157 97.8 315 280 235

18 2.5 192 119.5 430 385 325

20 2.5 245 152.5 610 550 460

22 2.5 303 189.0 830 750 625

24 3 353 222.0 1065 960 800

27 3 459 286.0 1545 1390 1160

30 3.5 561 349.5 2095 1885 1575

33 3.5 694 432.5 2855 2570 2140

36 4 817 509.0 3665 3300 2750

42 4.5 1120 698.0 5865 5275 4395

Tensile Stress

Area

Sq mm KN [N.m] [N.m] [N.m]

Clamp Load

See Note 4

Torque

(Dry or Loctite® 263

K=0.20

TM

)

(Lube or Loctite®

TM

or 271TM or

242

Vibra-TITE

TM

K=0.18

111 or 140)

T o r q u e

(Loctite® 262

Vibra-TITE

TM

K=0.15

TM

131)

or

NOTES: 1. THESE TORQUE VALUES DO NOT APPLY TO CADMIUM PLATED FASTENERS 5000059K

2. ALL TORQUE VALUES ARE STATIC TORQUE MEASURED PER STANDARD AUDIT METHODS TOLERANCE = ±10%

3. * ASSEMBLY USES HARDENED WASHER

4. CLAMP LOAD LISTED FOR SHCS IS SAME AS GRADE 8 OR CLASS 10.9 AND DOES NOT REPRESENT FULL STRENGTH CAPABILITY OF SHCS.
IF HIGHER LOAD IS REQUIRED, ADDITIONAL TESTING IS REQUIRED.

2-10

3706PS, 3707PS, 4014PS, 4017PS, 33.7, 37.6, 37.7

2.3.2 Metric Fastener Torque Chart (Continued)

Values for Magni Coated Fasteners (Ref 4150701)*

CLASS 8.8 METRIC (HEX/SOCKET HEAD) BOLTS CLASS 8 METRIC NUTS

Size Pitch

30.55.03

3.5 0.6 6.78

40.78.78

5 0.8 14.20

6 1 20.10

7 1 28.90

8 1.25 36.60

10 1.5 58.00

12 1.75 84.30

14 2 115

16 2 157

18 2.5 192

20 2.5 245

22 2.5 303

24 3 353

27 3 459

30 3.5 561

33 3.5 694

36 4 817

42 4.5 1120

Tensile Stress

Area

Sq mm KN [N.m] [N.m] [N.m]

Clamp Load

See Note 4

2.19 1.1 1.1 1.0

2.95 1.8 1.7 1.5

3.82 2.6 2.4 2.3

6.18 5.3 4.9 4.6

8.74 9 8.4 7.9

12.6 15 14 13

15.9 22 20 19

25.2 43 40 38

36.7 75 70 66

50.0 119 110 105

68.3 186 175 165

83.5 256 240 225

106.5 362 340 320

132.0 494 465 435

153.5 627 590 555

199.5 916 860 810

244.0 1245 1170 1100

302.0 1694 1595 1495

355.5 2176 2050 1920

487.0 3477 3275 3070

(Dry or Loctite® 263

General Information and Specifications

Torque

K=0.17

(Lube or Loctite® 242

TM

)

Vibra-TITE

Torque

TM

271

TM

K=0.16

TM

or

111 or 140)

or

T o r q u e

(Loctite® 262

Vibra-TITE

K=0.15

TM

TM

131)

or

NOTES: 1. THESE TORQUE VALUES DO NOT APPLY TO CADMIUM PLATED FASTENERS 5000059K

2. ALL TORQUE VALUES ARE STATIC TORQUE MEASURED PER STANDARD AUDIT METHODS TOLERANCE = ±10%

3. * ASSEMBLY USES HARDENED WASHER

4. CLAMP LOAD LISTED FOR SHCS IS SAME AS GRADE 8 OR CLASS 10.9 AND DOES NOT REPRESENT FULL STRENGTH CAPABILITY OF SHCS.
IF HIGHER LOAD IS REQUIRED, ADDITIONAL TESTING IS REQUIRED.

3706PS, 3707PS, 4014PS, 4017PS, 33.7, 37.6, 37.7

2-11

General Information and Specifications

2.3.2 Metric Fastener Torque Chart (Continued)

Values for Magni Coated Fasteners (Ref 4150701)*

CLASS 10.9 METRIC (HEX HEAD) BOLTS CLASS 10 METRIC NUTS,

CLASS 12.9 SOCKET HEAD CAP SCREWS M6 AND ABOVE*

T o r q u e

Size Pitch

3 0.5 5.03 3.13

3.5 0.6 6.78 4.22

4 0.7 8.78 5.47

5 0.8 14.20 8.85

6 1 20.10 12.5 13 12 11

7 1 28.90 18.0 21 20 19

8 1.25 36.60 22.8 31 29 27

10 1.5 58.00 36.1 61 58 55

12 1.75 84.30 52.5 105 100 95

14 2 115 71.6 170 160 150

16 2 157 97.8 265 250 235

18 2.5 192 119.5 365 345 325

20 2.5 245 152.5 520 490 460

22 2.5 303 189.0 705 665 625

24 3 353 222.0 905 850 800

27 3 459 286.0 1315 1235 1160

30 3.5 561 349.5 1780 1680 1575

33 3.5 694 432.5 2425 2285 2140

36 4 817 509.0 3115 2930 2750

42 4.5 1120 698.0 4985 4690 4395

Tensile Stress

Area

Sq mm KN [N.m] [N.m] [N.m]

Clamp Load See

Note 4

Torque

(Dry or Loctite® 263

K=0.17

TM

)

(Lube or Loctite®

TM

or 271TM or

242

Vibra-TITE

TM

K=0.18

111 or 140)

T o r q u e

(Loctite® 262

Vibra-TITE

TM

K=0.15

TM

131)

or

NOTES: 1. THESE TORQUE VALUES DO NOT APPLY TO CADMIUM PLATED FASTENERS 5000059K

2. ALL TORQUE VALUES ARE STATIC TORQUE MEASURED PER STANDARD AUDIT METHODS TOLERANCE = ±10%

3. * ASSEMBLY USES HARDENED WASHER

4. CLAMP LOAD LISTED FOR SHCS IS SAME AS GRADE 8 OR CLASS 10.9 AND DOES NOT REPRESENT FULL STRENGTH CAPABILITY OF SHCS.
IF HIGHER LOAD IS REQUIRED, ADDITIONAL TESTING IS REQUIRED.

2-12

3706PS, 3707PS, 4014PS, 4017PS, 33.7, 37.6, 37.7

General Information and Specifications

2.3.3 Hydraulic Hose Torque Chart

O-Ring Face Seal & JIC Torque Chart

Size ORFS JIC Flats Method

4

6

8

10

12

16

20

24

18 Nm

(13 lb-ft)

31 Nm

(23 lb-ft)

54 Nm

(40 lb-ft)

81 Nm

(60 lb-ft)

100 Nm

(136 lb-ft)

156 Nm

(115 lb-ft)

230 Nm

(170 lb-ft)

271 Nm

(200 lb-ft)

18 Nm

(13 lb-ft)

31 Nm

(23 lb-ft)

54 Nm

(40 lb-ft)

81 Nm

(60 lb-ft)

115 Nm

(85 lb-ft)

156 Nm

(115 lb-ft)

230 Nm

(170 lb-ft)

271 Nm

(200 lb-ft)

38,1 to 44,5 mm

1.5 to 1.75 in.

25,4 to 38,1 mm

1 to 1.5 in.

38,1 to 44,5 mm

1.5 to 1.75 in.

38,1 to 44,5 mm

1.5 to 1.75 in.

25,4 to 38,1 mm

1 to 1.5 in.

19,0 to 25,4 mm

0.75 to 1.0 in.

19,0 to 25,4 mm

0.75 to 1.0 in.

19,0 to 25,4 mm

0.75 to 1.0 in.

Flats Method:

1. If equipped, lubricate o-ring with hydraulic oil. Hand
tighten the swivel nut until no lateral movement of
the swivel nut can be detected. Average hand torque
is 4 Nm (3 lb-ft).

2. Mark a dot on one of the swivel nut flats and another
dot in line on the hex of the adapter it’s connecting
to.

3. Use the double wrench method while tightening to
avoid hose twist.

4. After the connection has been properly tightened,
mark a straight line across the connecting parts, not
covering the dots indicating that the connection has
been properly tightened.

32 N/A

Note: By definition the “Flats Method“ will contain some
variance. Use the “Flats Method” only when accessibility
with a torque wrench is not possible.

Torque Wrench:

1. Identify the appropriate application and refer to the
above chart for the correct torque value.

2. If equipped, lubricate o-ring with hydraulic oil. Hand
tighten the swivel nut until no lateral movement of
the swivel nut can be detected. Average hand torque
is 4 Nm (3 lb-ft).

3. Use the double wrench method while tightening to
avoid hose twist.

4. Torque wrench must be held at the center of the grip.
Apply constant force until it clicks.

5. After the connection has been properly tightened,
mark a straight line across the connecting parts
indicating that the connection has been properly
tightened.

366 Nm

(270 lb-ft)

19,0 to 25,4 mm

0.75 to 1.0 in.

3706PS, 3707PS, 4014PS, 4017PS, 33.7, 37.6, 37.7

2-13

General Information and Specifications

2.4 SPECIFICATIONS

2.4.1 Travel Speeds

First Gear 7 kph (4 mph)

Second Gear 12 kph (7 mph)

Third Gear 21 kph (13 mph)

Fourth Gear 32 kph (20 mph)

Fifth Gear (if equipped) Up to 40 kph (25 mph)

Six Gear (if equipped) Up to 40 kph (25 mph)

2.4.2 Hydraulic Cylinder Performance

Note: Machine with no attachment or load, engine at full throttle, hydraulic oil above 54° C (130° F) minimum, engine
at operating temperature.

FUNCTION

3706PS 3707PS 33.7 37.6 37.7 4014PS 4017PS

Boom Extend (Boom Level) 4-7 5-8 3-7 4-7 5-8 10-13 22-26

Boom Retract (Boom Level) 4-6 5-7 3-7 4-6 5-7 10-15 15-25

Boom Lift 5-7 6-10 6-10 5-7 6-10 14-18 15-20

Boom Lower 3-6 5-9 5-8 3-6 5-9 8-13 12-15

Quick Coupler Raise 2-4 2-5 2-4 2-4 2-5 2-5 2-5

Quick Coupler Lower 2-4 2-4 2-4 2-4 2-4 2-5 3-6

Level - Full Right to Left N/A N/A N/A N/A N/A 7-15 7-15

Level - Full Left to Right N/A N/A N/A N/A N/A 7-12 7-15

Outrigger - Both Down N/A N/A N/A N/A N/A 5-8 6-10

Outrigger - Both Up N/A N/A N/A N/A N/A 4-9 5-9

Outrigger - Single Down N/A N/A N/A N/A N/A 3-7 3-6

Outrigger - Single Up N/A N/A N/A N/A N/A 3-7 3-6

APPROXIMATE TIMES (seconds)

2.4.3 Platform Hydraulic Performance Specifications

FUNCTION

4014PS 4017PS

Platform Lift 31-60 39-60

Platform Lower 31-60 39-60

Platform Extend 19-35 27-43

Platform Retract 19-49 27-60

Platform Rotate 180° 14-40 14-40

2-14

APPROXIMATE TIMES (seconds)

3706PS, 3707PS, 4014PS, 4017PS, 33.7, 37.6, 37.7

General Information and Specifications

2.4.4 Electrical System

Battery

Type, Rating 12 V, Negative (-) Ground, Tapered Top Post, Maintenance Free

Quantity 1 - (2 - If Equipped)

Cranking Performance

Group/Series BCI Group 31

Alternator 14V, 120 Amps

Starter 12V, R2,7 KW

1 - 900 Cold Cranking Amps @ -18° C (0° F)
(2 - If Equipped), 750 Cold Cranking Amps @ -18° C (0° F) each

2.4.5 Engine Fan Speed

Fan Type Fan Speed - High Idle Fan Hydraulic Pressure Oil Temperature

Hydraulic 2225 - 2275 RPM 205 - 215 bar (2973 - 3118 psi) 45°- 55°C (113°-131°F)

Belt Driven 2525 - 2575 RPM N/A N/A

2.4.6 Engine Performance Specifications

Description TCD 3.6 L4 TCD 3.6 L4

Engine Make/Model Deutz TCD Deutz TCD

Displacement 3,6 liters (276 in³) 3,6 liters (276 in³)

Low Idle 945-955 rpm 945-955 rpm

High Idle 2295-2345 rpm 2295-2345 rpm

Horsepower

Peak Torque N/A N/A

Fuel Delivery Fuel Injection Fuel Injection

Air Cleaner

Dry Type, Replaceable Primary and Safety

74,4 kW (99,7 HP)

@ 2200 rpm

Dry Type, Replaceable Primary and Safety

Elements

90kW (121.0 HP) @

2200 rpm

Elements

2.4.7 Transmission Performance Specifications

Engine kW (Horsepower) Transmission Stall Speed

Deutz TCD 3.6 L4 74,4 (99.7) 4 Speed 1910 rpm 2030 rpm

Deutz TCD 3.6 L4 90,0 (121.0) 6 Speed 2030 rpm 2150 rpm

3706PS, 3707PS, 4014PS, 4017PS, 33.7, 37.6, 37.7

2-15

General Information and Specifications

2.4.8 Tires

Note: 3706PS, 3707PS, 4014PS, 33.7, 37.6 & 37.7 wheel lug nut torque is 340-380 Nm (251-280 lb-ft)

Note: 4017PS wheel lug nut torque is 440-480 Nm (324-354 lb-ft)

Note: Pressures for foam filled tires are for initial fill ONLY.

a. 3706PS, 3707PS, 33.7, 36.6 & 37.7

Size Tire Type Minimum Ply/

15.5/80-24 TR01 16 Ply

15.5/80-24 SGI 14 Ply

15.5-25 L-2 16 Ply

500/70R24

(3707PS, 33.7 & 37.7 only)

400/80-24 Power CL N/A

Star Rating

XMCL N/A

Fill Type Pressure

Pneumatic 4,25 Bar (62 psi)

Liquid Filled

Pneumatic 4,0 Bar (58 psi)

Liquid Filled

Pneumatic 4,0 Bar (58 psi)

Foam Filled

Liquid Filled

Pneumatic 3,0 Bar (44 psi)

Liquid Filled

Pneumatic 4,0 Bar (58 psi)

Liquid Filled

Approx 6,0 L

(200 oz)

Approx 6,0 L

(200 oz)

Approx 264 kg

(582 lb)

Approx 4,6 L

(155 oz)

Approx 6,5 L

(220 oz)

Approx 6,0 L

(200 oz)

440/80-24

(3707PS, 33.7 & 37.7 only)

2-16

Power CL N/A

Pneumatic 3,5 Bar (51 psi)

Liquid Filled

3706PS, 3707PS, 4014PS, 4017PS, 33.7, 37.6, 37.7

Approx 6,4 L

(215 oz)

b. 4014PS

General Information and Specifications

15.5/80-24 TR01 16 Ply

400/80-24 Power CL N/A

440-80-24 Power CL N/A

c. 4017PS

Size Tire Type Minimum Ply/

Star Rating

15.5-25 L-2 12 Ply

Size Tire Type Minimum Ply/

Star Rating

Fill Type Pressure

Pneumatic 4,25 Bar (62 psi)

Liquid Filled

Approx 6,0 L

(200 oz)

Pneumatic 4,0 Bar (58 psi)

Liquid Filled

Approx 4,6 L

(155 oz)

Pneumatic 4,5 Bar (65 psi)

Liquid Filled

Approx 6,0 L

(200 oz)

Pneumatic 4,0 Bar (58 psi)

Liquid Filled

Approx 6,4 L

(215 oz)

Fill Type Pressure

14-24 TG02 16 Ply

14-24 SGG-2A 16 Ply

Pneumatic 4,25 Bar (61 psi)

Foam Filled

Liquid Filled

Approx 264 kg

(582 lb)

Approx 4,6 L

(155 oz)

Pneumatic 5,25 Bar (76 psi)

Foam Filled

Liquid Filled

Approx 264 kg

(582 lb)

Approx 4,6 L

(155 oz)

3706PS, 3707PS, 4014PS, 4017PS, 33.7, 37.6, 37.7

2-17

General Information and Specifications

2.5 FLUIDS, LUBRICANTS AND CAPACITIES

2.5.1 3706PS, 3707PS, 4014PS & 4017PS

a. Fluids and Capacities

Engine Crankcase Oil

Capacity with Filter Change 8,0 liter (8.5 quart)

Type o f O il

-10°C to 40°C (14° to 104°F) SAE 15W-40

-15°C to 40°C (5° to 104°F) SAE 10W-40

-30°C to 30°C (-22° to 86°F) SAE 15W-40

Specification API CJ-4 Plus

Fuel Tank

Capacity 150 liter (39.6 gallon)

Type of Fuel

Standard #2 Diesel

Cold Weather Blend of #1 and #2 Diesel

Specification Ultra Low Sulfur (S <

Cooling System

System Capacity 25,0 liter (26.0 quart)

Type of Coolant

Standard 50/50 DF Coolant & Water

Cold Weather 40/60 DF Coolant & Water

Transmission System

Capacity with Filter Change 18,0 liter (19 qt)

Type of Oil Mobilfluid 424 Hydraulic Oil

Transfer Case

Capacity 2.75 liter (2.9 qt)

Type of Oil Mobilfluid 424 Hydraulic Oil

Hydraulic System

System Capacity

3706PS & 3707PS 135 liter (35.7 gallon)

15 mg/kg)

4014PS & 4017PS 145 liter (38.3 gallon)

Reservoir Capacity to Full Mark 90 liter (23.8 gallon)

Type of Oil Mobilfluid 424 Hydraulic Oil

Auxiliary Hydraulic Circuit Max Flow 80 lpm (21.1 gpm)

2-18

3706PS, 3707PS, 4014PS, 4017PS, 33.7, 37.6, 37.7