MFC-J6945DW / MFC-J6947DW
Quick Setup Guide
Read the Product Safety Guide first, then read this Quick Setup Guide for the correct installation procedure.
The latest manuals are available at the Brother Solutions Center: |
D012AC001-00 |
|
UK |
||
support.brother.com/manuals |
||
Version 0 |
||
|
1 |
Unpack the machine and check the components |
|
The components included in the box may differ depending on your country. |
||
|
||
|
Remove the protective tape or film covering the machine. |
|
Inbox Ink Cartridges* |
Quick Setup Guide |
||
|
• |
Black |
Product Safety Guide |
|
|
• |
Yellow |
|
|
|
• |
Cyan |
|
|
|
• |
Magenta |
|
|
|
*Inbox ink cartridges contain the |
|
||
|
following yield of replacement |
|
||
Watch our FAQ videos for help |
LC3237 cartridges: |
|
||
- Black: approx. 75% yield |
Brother Installation Disc |
|||
with setting up your Brother |
||||
- Others: approx. 65% yield |
||||
machine. |
|
|||
uu Reference Guide: Supply |
|
|||
support.brother.com/videos |
|
Specifications |
|
|
2 |
Load plain A4 paper |
For more information about paper handling and sizes, see the Reference Guide. |
Power Cord
Maintenance Sheet
Do not exceed this mark (bbb).
NOTE
•The Reference Guide for these models is available on the enclosed installation disc.
•Most of the illustrations in this Quick Setup Guide show the MFC-J6945DW.
•Save all packing materials and the box in case you must ship your machine.
•You must purchase the correct interface cable for the interface you want to use.
USB cable
Use a USB 2.0 cable (Type A/B) that is no more than 5 metres long.
Ethernet (Network) cable
Use a straight-through Category 5 (or greater) twisted-pair cable for 10BASE-T or 100BASE-TX Fast Ethernet Network.
Secure Network Access
Your machine’s default password is initpass. We recommend you change it to protect your machine from unauthorised access.
|
|
Adjust the paper guides. |
|
Pull the paper tray completely out of |
|
|
Slowly push the paper tray |
the machine as shown by the arrow. |
Fan the paper well. |
Load the paper in the tray. |
completely into the machine. |
Pull out the paper support until it locks into place.
3 Connectcord the power
(Example for UK)
NOTE
You can adjust the control panel angle to read the touchscreen more easily.
4 |
Select your country |
5 Install the inbox ink cartridges |
or language |
||
|
(Initial setup only) |
|
After turning the machine on, you may need to set your country or language (depending on your machine).
If required, follow the touchscreen instructions.
Open the ink cartridge cover.
Quickly shake just the black ink cartridge horizontally 15 times as shown, before inserting it into the machine.
Follow the touchscreen instructions to unpack and install the ink cartridges. Close the ink cartridge cover. The machine will prepare the ink tube system for printing.
NOTE
The first time you install a set of ink cartridges the machine will use an amount of ink to fill the ink delivery tubes for high quality printouts. This process will only happen once.
6 Set the date and time
Follow the touchscreen instructions to set the date and time.
7 Machine settings
Follow the touchscreen instructions to configure the machine’s settings:
•View operation tips
•Set Brother LCD Message defaults
•Check print quality
•Configure the tray or paper size settings
•Print the installation sheet
8 |
Select your language |
(if needed and only for |
|
|
certain models) |
1.Press 
[Settings] > [All Settings] > [Initial Setup] > [Local Language].
2.Press your language.
3.Press 
.
9 |
Connect the telephone line cord |
If you are not using your machine as a fax, go to 10 . |
For more information on using the fax feature, see the Online User’s Guide.
(Example for UK)
Lift the scanner cover. |
Connect the telephone line cord. |
Close the scanner cover. |
|
Use the socket marked LINE and guide |
|
|
the cord out the back of the machine. |
|
Loading...