Quick Installation Guide
300Mbps Wireless N ADSL2+ Modem Router
TD-W8960N
7106505405 REV6.0.0
Connecting the Hardware
If you don’t need the phone service, just skip step 1 and directly connect the modem router to the phone jack with a phone cable, then follow steps 3 and 4 to complete the hardware connection.
Phone Jack
1 Connect the ADSL splitter to the phone jack.
ADSL Splitter
(Optional) phone tothe Connect
Modem Router
2 Connect the modem router to the ADSL splitter.
Power Adapter
3 Turn on the modem router.
4 Verify that the hardware connection is correct by checking these LEDs.
Power |
ADSL |
Wi-Fi |
On |
On |
On |
Notes:
1) The ADSL LED takes about 1 to 2 minutes to stabilize.
2)If the Wi-Fi LED is off, please press the WiFi button on the rear panel for 2 seconds, then check the LEDs again in a few seconds.