Loading...TP-Link T1600G-18TS, T1600G-52TS, T1600G-52PS, T1700G-28TQ, T1700X-16TS Installation Guide
...
Business Networking Solution
Installation Guide
Jetstream Smart Switch
About this Installation Guide
This Installation Guide describes the hardware characteristics, installation methods and the points that should be attended to during the installation. This Installation Guide is structured as follows:
Chapter 1 Introduction
This chapter describes the external components of the switch.
Chapter 2 Installation
This chapter illustrates how to install the switch.
Chapter 3 Connection
This chapter illustrates how to do the physical connection of the switch.
Chapter 4 Configuration
This chapter illustrates how to configure the switch.
Appendix A Troubleshooting Appendix B Hardware Specifications
Audience
This Installation Guide is for:
Network Engineer |
Network Administrator |
Conventions
•Some models featured in this guide may be unavailable in your country or region. For local sales information, visit https://www.tp-link.com.
•The figures in Chapter 2, Chapter 3 and Chapter 4 are for demonstration purposes only. Your switch may differ in appearance from that depicted.
•PoE budget calculations are based on laboratory testing. Actual PoE power budget is not guaranteed and will vary as a result of client limitations and environmental factors.
•This guide uses the specific formats to highlight special messages. The following table lists the notice icons that are used throughout this guide.
Remind to be careful. A caution indicates a potential which may result in device damage.
Remind to take notice. The note contains the helpful information for a better use of the product.
Related Document
The User Guide and CLI Reference Guide of the product are provided on Download Center. To obtain the latest product information, visit the official website: https://www.tp-link.com.
Contents
Chapter 1 Introduction———————————— 01
1.1 |
Product Overview............................................................ |
01 |
1.2 |
Appearance....................................................................... |
01 |
Chapter 2 Installation— ——————————— 08
2.1 |
Package Contents........................................................... |
08 |
2.2 |
Safety Precautions.......................................................... |
08 |
2.3 |
Installation Tools.............................................................. |
10 |
2.4 |
Product Installation......................................................... |
10 |
Chapter 3 Connection— ——————————— 12
3.1 |
Ethernet Port..................................................................... |
12 |
3.2 |
SFP/SFP+ Slot................................................................... |
12 |
3.3 |
Verify Installation............................................................. |
12 |
3.4 |
Power On............................................................................. |
13 |
3.5 |
Initialization........................................................................ |
13 |
Chapter 4 Configuration— —————————— 14
4.1 |
Configuration Overview................................................ |
14 |
4.2 |
Standalone Mode............................................................ |
14 |
4.3 |
Controller Mode............................................................... |
15 |
Appendix A Troubleshooting— ———————— 18
Appendix B Specifications— ————————— 19
JetStream Smart Switch
Chapter 1 Introduction
1.1Product Overview
Designed for workgroups and departments, TP-Link JetStream Smart Switch provides wire-speed performance and abundant L2 management features. It provides a variety of service features and multiple powerful functions with high security.
The EIA-standardized framework and smart configuration capacity can provide flexible solutions for a variable scale of networks. QoS and IGMP snooping/filtering optimize voice and video application. Link aggregation increases aggregated bandwidth, optimizing the transport of business critical data. SNMP, RMON, WEB and CLI Login bring abundant management policies. TP-Link JetStream Smart Switch integrates multiple functions with excellent performance, and is friendly to manage, which can fully meet the need of the users demanding higher networking performance.
T1600G-52PS (TL-SG2452P)/TL-SG2210MP/TL-SG2428P/TL-SL2428P is also a Power Sourcing Equipment (PSE*). Some of the RJ45 ports on the switch support Power over Ethernet (PoE*) function, which can automatically detect and supply power to those powered devices (PDs*) complying with IEEE 802.3af and IEEE 802.3at.
*PSE: a device (switch or hub for instance) that provides power through an Ethernet cable.
*PoE: a technology describes a system to transmit electrical power, along with data, to remote devices over standard twisted-pair cable in an Ethernet.
*PD: a device powered by a PSE and thus consumes energy. Examples include powering network cameras, wireless LAN access points, IP telephones, network hubs, embedded computers etc.
1.2Appearance
■■ Front Panel
The front panel of T1600G-18TS (TL-SG2216) is shown as the following figure.
Figure 1-1 Front Panel of T1600G-18TS (TL-SG2216)
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||||||||||||||
LEDs |
Reset 10/100/1000 Mbps RJ45 Port SFP Slot |
||||||||||||||||||||||||||
The front panel of T1600G-52TS (TL-SG2452) is shown as the following figure.
Figure 1-2 Front Panel of T1600G-52TS (TL-SG2452)
T1600G-52TS
Smart Switch
PWR |
Reset |
SYS |
|
Reset LEDs 10/100/1000 Mbps RJ45 Port SFP Slot
01 
Introduction
JetStream Smart Switch
The front panel of T1600G-52PS (TL-SG2452P) is shown as the following figure.
Figure 1-3 Front Panel of T1600G-52PS (TL-SG2452P)
|
PWR |
1 |
2 |
3 |
4 |
5 |
6 |
7 |
8 |
9 |
10 |
11 |
12 |
13 |
14 |
15 |
16 |
17 |
18 |
19 |
20 |
21 |
22 |
23 |
24 |
25 |
26 |
27 |
28 |
29 |
30 |
31 |
32 |
33 |
34 |
35 |
36 |
37 |
38 |
39 |
40 |
41 |
42 |
43 |
44 |
45 |
46 |
47 |
48 |
49 |
50 |
51 |
52 |
|
PoE Max |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
T1600G-52PS |
SYS |
FAN |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Speed |
PoE |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Smart PoE Switch |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Reset |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Reset LED Mode Switch |
LEDs |
|
|
|
10/100/1000 |
|
Mbps RJ45 Port |
SFP |
|
Slot |
||||
|
|
|||||||||||||
Button |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The front panel of T1700G-28TQ is shown as the following figure.
Figure 1-4 Front Panel of T1700G-28TQ
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||||||||||||||||||||||||||||
LEDs |
|
|
Unit ID LED Reset |
10/100/1000 Mbps RJ45 Port |
SFP+ Slot |
||||||||||||||||||||||||||||||||||||
The front panel of T1700X-16TS is shown as the following figure.
Figure 1-5 Front Panel of T1700X-16TS
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||||||||
|
LEDs Indication |
LEDs Reset |
100 M/1000 |
M/10 Gbps 1 G/10 Gbps |
SFP+ Slot |
|||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
RJ45 Port |
||||||
The front panel of TL-SG2218 is shown as the following figure.
Figure 1-6 Front Panel of TL-SG2218
TL-SG2218
16-Port Gigabit Smart Switch with 2 SFP Slots
|
|
|
|
|
LEDs |
Reset 10/100/1000 Mbps RJ45 Port SFP Slot |
|||
The front panel of TL-SG2210MP is shown as the following figure.
Figure 1-7 Front Panel of TL-SG2210MP
TL-SG2210MP
8-Port Gigabit Smart PoE+ Switch with 2 SFP Slots
LEDs LED Mode |
Reset |
10/100/1000 Mbps |
SFP Slot |
Switch Button |
|
RJ45 Port and PoE Port |
|
Introduction 
02
JetStream Smart Switch
The front panel of TL-SG2428P is shown as the following figure.
Figure 1-8 Front Panel of TL-SG2428P
TL-SG2428P |
|
|
24-Port Gigabit Smart PoE+ Switch with 4 SFP Slots |
|
|
LEDs LED Mode Reset |
10/100/1000 Mbps |
SFP Slot |
Switch Button |
RJ45 Port |
|
The front panel of TL-SL2428P is shown as the following figure.
Figure 1-9 Front Panel of TL-SL2428P
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||||||||||||||||||||||||||||||
LEDs |
LED Mode |
|
Reset 10/100 |
Mbps RJ45 |
10/100/1000 |
Mbps SFP Slot |
|||||||||||||||||||||||||||||||||||||
|
|
|
|
Switch Button |
|
|
|
|
|
|
Port and PoE Port |
|
|
RJ45 Port |
|||||||||||||||||||||||||||||
LEDs
For T1600G-18TS (TL-SG2216)/T1600G-52TS (TG-SG2452)/T1700G-28TQ/T1700X-16TS/TL-
SG2218.
LED |
Indication |
|
PWR |
On: The switch is powered on. |
|
Off: The switch is powered off or power supply is abnormal. |
||
|
Flashing: Power supply is abnormal. |
|
SYS |
Flashing: The switch works properly. |
|
On or Off: The switch works improperly. |
||
|
||
|
On: A device is connected to the corresponding port but no activity. |
|
10/100M |
Flashing: Data is being transmitted or received. |
|
Link/Act |
Off: No device is connected to the corresponding port. |
|
|
Note: Link/Act for T1600G-18TS (TL-SG2216)/T1700G-28TQ/TL-SG2218. |
|
1000Mbps |
On: Running at 1000 Mbps. |
|
Off: Running at 10/100 Mbps or no device is linked to the corresponding port. |
||
|
Note: For T1600G-18TS (TL-SG2216)/1700G-28TQ/TL-SG2218. |
|
|
|
|
|
Green On: Running at 1000 Mbps, but no activity. |
|
1000M |
Green Flashing: Running at 1000 Mbps and is transmitting or receiving data. |
|
Yellow On: Running at 10/100 Mbps, but no activity. |
||
10/100/1000Mbps |
Yellow Flashing: Running at 10/100 Mbps and is transmitting or receiving data. |
|
|
Off: No device is linked to the corresponding port. |
|
|
Note: 10/100/1000Mbps for port 1–48 of T1600G-52TS (TL-SG2452). |
03 
Introduction
JetStream Smart Switch
LED |
Indication |
|
|
Green On: A 1000 Mbps device is connected to the corresponding port but no |
|
|
activity. |
|
|
Green Flashing: A 1000 Mbps device is linked to the corresponding port and data is |
|
|
being transmitted or received. |
|
100Base-FX |
Yellow On: A 10/100 Mbps device is connected to the corresponding port but no |
|
activity. |
||
1000Base-X |
Yellow Flashing: A 10/100 Mbps device is linked to the corresponding port and is |
|
|
transmitting or receiving data. |
|
|
Off: No device is linked to the corresponding port. |
|
|
Note: 100Base-FX/1000Base-X for port 49–52 of T1600G-52TS (TL-SG2452). |
|
|
Port 49–52 of T1600G-52TS (TL-SG2452) doesn't support 10 Mbps devices. |
|
|
Green On: Running at 10 Gbps, but no activity. |
|
|
Green Flashing: Running at 10 Gbps and is transmitting or receiving data. |
|
25–28 |
Yellow On: Running at 1000 Mbps, but no activity. |
|
Link/Act |
Yellow Flashing: Running at 1000 Mbps and is transmitting or receiving data. |
|
|
Off: No device is linked to the corresponding port. |
|
|
Note: 25–28 for T1700G-28TQ. Link/Act for port 13–16 of T1700X-16TS. |
|
|
Green On: Running at 10 Gbps, but no activity. |
|
|
Green Flashing: Running at 10 Gbps and is transmitting or receiving data. |
|
Link/Act |
Yellow On: Running at 100/1000 Mbps, but no activity. |
|
Yellow Flashing: Running at 100/1000 Mbps and is transmitting or receiving data. |
||
|
||
|
Off: No device is linked to the corresponding port. |
|
|
Note: Only for port 1–12 of T1700X-16TS. |
|
|
On: The switch works as master in the stack system, or does not join any stack |
|
Master |
system. |
|
Off: The switch works as stack member in the stack system. |
||
|
Note: Only for T1700G-28TQ. |
|
|
Green: All the fans work properly. |
|
Fan |
Yellow: Not all the fans work properly. |
|
Off: The switch is working abnormally. |
||
|
||
|
Note: Only for T1700X-16TS. |
T1600G-52PS (TL-SG2452P)/TL-SG2210MP/TL-SG2428P/TL-SL2428P has an LED mode switch button which is used to switch the LED status indication. When the Speed LED is on, the port LED is indicating the data transmission rate. When the PoE LED is on, the port LED is indicating the power supply status. By default the Speed LED is on. Pressing the mode switch button, the Speed LED will turn off and the PoE LED will light up. Then the PoE LED will turn off after being on for 60 seconds and the Speed LED will light up again.
LED |
Indication |
PWR |
On: The switch is powered on. |
Off: The switch is powered off or power supply is abnormal. |
|
|
Flashing: Power supply is abnormal. |
Introduction 
04
JetStream Smart Switch
LED |
Indication |
|
SYS |
Flashing: The switch works properly. |
|
On or Off: The switch works improperly. |
||
|
||
FAN |
Green: All the fans work properly. |
|
Yellow: Not all the fans work properly. |
||
|
||
PoE Max |
On: The remaining PoE power is ≤ 7 W. |
|
Flashing: The remaining PoE power keeps ≤ 7 W after this LED is on for 2 minutes. |
||
|
Off: The remaining PoE power is > 7 W. |
|
|
Green On: Running at 100 Mbps, but no activity. |
|
10/100M or PoE |
Green Flashing: Running at 100 Mbps and is transmitting or receiving data. |
|
Yellow On: Running at 10 Mbps, but no activity. |
||
(When the Speed |
Yellow Flashing: Running at 10 Mbps and is transmitting or receiving data. |
|
LED is on) |
||
|
Off: No device is linked to the corresponding port. |
|
|
Note: Only for TL-SL2428P. |
|
|
Green On: Running at 1000 Mbps, but no activity. |
|
1000M |
Green Flashing: Running at 1000 Mbps and is transmitting or receiving data. |
|
Yellow On: Running at 10/100 Mbps, but no activity. |
||
Speed or PoE |
||
Yellow Flashing: Running at 10/100 Mbps and is transmitting or receiving data. |
||
(When the Speed |
||
LED is on) |
Off: No device is linked to the corresponding port. |
|
|
Note: 1000M for TL-SL2428P. Speed or PoE for TL-SG2210MP, port 1–24 of TL- |
|
|
SG2428P and port 1–48 of T1600G-52PS (TL-SG2452P) |
|
|
Green On: The port is supplying power normally. |
|
10/100M or PoE |
Green Flashing: The supply power exceeds the correponding port's maximum power. |
|
Yellow On: Overload or short circuit is detected. |
||
Speed or PoE |
Yellow Flashing: Power-on self-test failed. |
|
(When the PoE LED |
||
is on) |
Off: Not providing PoE power on the port. |
|
|
Note: 10/100M or PoE for TL-SL2428P. Speed or PoE for TL-SG2210MP, port 1–24 of |
|
|
TL-SG2428P and port 1–48 of T1600G-52PS (TL-SG2452P) |
|
|
Green On: A 1000 Mbps device is linked to the corresponding port, but no activity. |
|
|
Green Flashing: A 1000 Mbps device is linked to the corresponding port and data is |
|
|
being transmitted or received. |
|
100Base-FX |
Yellow On: A 10/100 Mbps device is linked to the corresponding port, but no activity. |
|
Yellow Flashing: A 10/100 Mbps device is linked to the corresponding port and is |
||
1000Base-X |
||
transmitting or receiving data. |
||
SFP1, SFP2 |
||
Off: No device is linked to the corresponding port. |
||
|
Note: 1000Base-X for port 25–28 of TL-SG2428P. 100Base-FX/1000Base-X for port |
|
|
49–52 of T1600G-52PS (TL-SG2452P). SFP1/SFP2 for TL-SG2210MP. |
|
|
100Base-FX and 1000Base-X ports don't support 10 Mbps device. |
LED Mode Switch Button
Press this button to switch the LED status indication between Speed and PoE.
Reset
With the switch powered on, press Reset button for 5 seconds to reset the switch to its factory default settings.
05 
Introduction
Loading...