Siemens EQ.300 TI351209RW User manual

Fully automatic espresso machine Machine à expresso automatique Volautomatische espressomachine

Ekspres do kawy

Plně automatický kávovar Автоматическая кофемашина

Kaffeevollautomat

TI351...

en	Instruction manual .......................................................................	5
fr	Mode d’emploi ...........................................................................	27
nl	Gebruiksaanwijzing ....................................................................	51
pl	Instrukcja obsługi .......................................................................	75
cs	Návod k použití ..........................................................................	99
ru	ǪȋǻǽȃȆǻ ȊȉȆȗȂȉǽǻȈȃȚ ............................................................	121
de	Gebrauchsanleitung .................................................................	145

!

"

,

,,

,,,

#

,

,,

,,,

FO FN

,9

9

9,

$

,

,,

,,,

%

,

,,

,,,

,9

9

9,

&

'

Table of contents

enInstruction manual

8 Intended use. . . . . . . . . . . . . . . . . 6

( Important safety information . . . 6

7 Environmental protection . . . . . . 8

Saving energy. . . . . . . . . . . . . . . . . . . 8 Environmentally-friendly disposal . . . . 8

* Getting to know your appliance . . 9

Included in delivery. . . . . . . . . . . . . . . 9 Assembly and components . . . . . . . . 9 Controls . . . . . . . . . . . . . . . . . . . . . . 10

_ Accessories . . . . . . . . . . . . . . . . 11

K Before using for the first time . 11

Installing and connecting the

appliance . . . . . . . . . . . . . . . . . . . . . 11 Commissioning the appliance . . . . . 11

1 Operating the appliance . . . . . . 13

Preparing coffee using freshly

ground beans . . . . . . . . . . . . . . . . . . 13 Preparing drinks with milk . . . . . . . . 13 Adjusting beverage settings . . . . . . . 14 Water filter . . . . . . . . . . . . . . . . . . . . 16 Frost protection. . . . . . . . . . . . . . . . . 16

1 Settings. . . . . . . . . . . . . . . . . . . . 17

Automatic switch-off . . . . . . . . . . . . . 17 Switching the audible signal on/off. . 17 Setting the water hardness . . . . . . . . 17 Factory reset. . . . . . . . . . . . . . . . . . . 18

D Daily care and cleaning. . . . . . . 19

Cleaning agent . . . . . . . . . . . . . . . . . 19 Cleaning the appliance . . . . . . . . . . . 19

Cleaning the drip tray and coffee grounds container. . . . . . . . . . . . . . . 20

Cleaning the milk system . . . . . . . . . 20 Cleaning the brewing unit . . . . . . . . . 20

en

. Service programme. . . . . . . . . . 21

Starting Calc’nClean . . . . . . . . . . . . . 22

3 Trouble shooting . . . . . . . . . . . . 23

4 Customer service . . . . . . . . . . . 26

Technical data . . . . . . . . . . . . . . . . . . 26 E number and FD number. . . . . . . . . 26 Guarantee . . . . . . . . . . . . . . . . . . . . . 26

5

en Intended use

8 Intended use

Intended useCheck the appliance for damage after unpacking it. Do not connect the appliance if it has been damaged in transport.

This appliance is intended for domestic use only.

Only use the appliance indoors at room temperature and up to 2000 m above sea level.

(Important safety information

Important safety informationPlease read carefully, follow

and retain the operating instructions. When passing on the appliance, enclose these instructions.

This appliance can be used by children aged from 8 years and above and by persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and if they understand the hazards involved. Keep children under 8 years of age away from the appliance and connecting cable and do not allow them to use the appliance. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children unless they are older than 8 years and supervised.

6

:Warning

Danger of electric shock!

■The appliance may only be connected to a power supply with alternating current via a correctly installed socket with earthing. Ensure that the protective conductor system of the domestic electricity supply has been correctly installed.

Risk of electricConnectsh ck! and operate the

■

appliance only in accordance with the specifications on the rating plate. If the power cord of this appliance is damaged, it must be replaced by customer service.

Risk of electricDosh ck!not use if the power

■

cable or appliance is damaged. If a fault occurs, pull the mains plug or switch off the mains voltage immediately.

Risk of electricToshock!prevent hazards, the

■

appliance may be repaired by our customer service only.

Risk of electricNevershock! immerse the

■

appliance or mains cord in water.

Risk of electricThes ock! plug and socket

■

connection of the appliance must not come into contact with liquids.

Risk of electricPleaseshock! note the special

■

information on cleaning in the instructions.

Important safety information en

:Warning

Hazard due to magnetism!

The appliance contains permanent magnets which may affect electronic implants, e.g. heart pacemakers or insulin pumps. Persons with electronic implants should keep a minimum distance of 10 cm from the appliance and the water tank when removed.

:Warning

Risk of suffocation!

Do not let children play with packaging material. Store small parts safely as they can be easily swallowed.

:Warning Risk of burns!

■The milk system becomes very hot. After use, allow it to cool down first before touching it.

Risk of burns!After use, surfaces may still

■

be hot for a certain period.

Risk of burns!Freshly prepared beverages

■

are very hot.Leave to cool a little if necessary.

:Warning

Risk of injury!

■ Improper use of this appliance may result in injury.

Risk of injury!Do not reach into the

■

grinding unit.

7

en Environmental protection

:Warning Fire hazard!

■The appliance will become hot.

Fire hazard!Never operate the appliance

■

in a cupboard.

7Environmental protection

Environmental protectionSaving energy

■If the appliance is not being used, switch it off.

■Set the interval for automatic switch-off to the smallest value.

■If possible, do not interrupt coffee or milk froth dispensing. Stopping a process prematurely results in higher energy consumption and the drip tray fills up more quickly.

■Descale the appliance regularly to avoid a build-up of limescale. Limescale residue results in higher energy consumption.

Environmentally-friendly disposal

Dispose of packaging in an environmentally-friendly manner.

This appliance is labelled in accordance with European Directive 2012/19/EU concerning used electrical and electronic appliances (waste electrical and electronic equipment - WEEE). The guideline determines the framework for the return and recycling of used appliances as applicable throughout the EU.

Please ask your dealer about current disposal routes.

8

*Getting to know your appliance

Getting to knowyour applianceThis section provides an overview of the scope of delivery, the assembly and the components of your appliance. It also introduces you to the different controls.

Note: Depending on the appliance model, individual details and colours may differ.

How to use these instructions:

The cover pages of the operating instructions can be folded out towards the front. The illustrations are identified using numbers that are referred to in the operating instructions.

Example: ~ Fig. !

Included in delivery

~ Fig. !

# Fully automatic coffee machine + Water hardness testing strip 3 Instruction manual

; Milk frother

Getting to know your appliance en

Assembly and components

~ Fig. "

( On / off button (stand-by mode) 0 Control panel

8 Handle of milk frother

@Outlet system for coffee, height adjustable

HMilk frother (holder, frother, cover), height adjustable

PDrip tray (coffee grounds container, drip grate, drip plate, float)

X Door of brewing chamber ` Rating plate

H Brewing unit )" Aroma lid

)* Bean container

)2 Rotary selector for setting grinding level

): Cover for water tank )B Water tank

9

en Getting to know your appliance

Controls

Button	Meaning
k	Switch the appliance on and off
	The appliance rinses automatically when it is switched on and off.
	The appliance is not rinsed if:
	■ it is still warm when switched on, or
	■ coffee was not dispensed before the appliance was switched off.
	The appliance is ready for use when the LEDs of the buttons for selecting drinks light
	up in the control panel. The appliance has automatic switch-off. ~ "Selecting
	automatic switch-off" on page 17
espresso	Dispensing Espresso
caffe crema	Dispensing Caffe crema
cappuccino	Dispensing cappuccino
latte macchiato	Dispensing latte macchiato
milk	Frothing up milk
%	Coffee strength
	Adjusting the coffee strength ~ "Adjusting beverage settings" on page 14
calc’nClean	Start the service programme
	Flashes when the service programme needs to be performed.~ "Calc’nClean
	service programme" on page 22
--------

Symbol

Lights up when the water tank needs to be topped up with water or the water tank is not

'inserted.

Flashes when the water filter needs to be replaced.

(Lights up when trays need to be emptied. Flashes when door of brewing chamber is open.

is continu-				Ready to use, selection possible
ously lit
is pulsing				Dispensing underway
is flashing				Waiting for operation, e.g. with calc’nClean
off				Not available
--------

10

_ Accessories

AccessoriesThe following accessories are available from retailers or from customer service:

Accessory	Order number
	Retail	Customer ser-
		vice
Cleaning tablets	TZ80001N	00311807
Descaling tablets	TZ80002N	00576693
Water filter	TZ70003	00575491
Care set	TZ80004	00576330

--------

The contact data for customer service in all countries can be found at the back of these instructions.

Accessories en

K Before using for the first time

Beforeusing for the first timeIn this section, you will learn how to commission your appliance.

Note: Only use the appliance in frost-free areas. If the appliance was transported or stored at temperatures below 0 °C, you must wait for at least 3 hours before using it.

Installing and connecting the appliance

1.Remove any protective plastic film.

2.Place the appliance on a level, water-resistant surface which can bear the weight.

3.Using the mains plug, connect the appliance to an earthed socket that has been correctly installed.

Note: After plugging in, always wait (approx. 5 seconds).

Commissioning the appliance

Attaching milk frother

~ Fig. #

1.Remove milk frother parts from the bag.

2.Assemble milk frother.

3.Attach the milk frother on the front of the appliance.

Filling the bean container

This appliance can be used to make coffee drinks from coffee beans.

1.Open the lid )" of the bean container )*.

2.Pour in coffee beans.

3.Close the lid again.

11

en Before using for the first time

Notes

■Coffee beans that have been glazed or caramelised or that contain other sugary additives block the brewing unit. Only use pure bean mixes that are suitable for use in fully automatic espresso or coffee machines.

■The coffee beans are freshly ground for each brewing process.

■Keep the coffee beans sealed and stored in a cool place to maintain optimum quality.

■Coffee beans can be stored in the bean container for a number of days without losing their aroma.

Filling the water tank

Important: Fill the water tank with fresh, cold, still water on a daily basis. Prior to operation, check whether the water tank has been sufficiently filled.

1.Carefully remove the cover of the water tank.

2.Use the handle to remove the water tank and then rinse out.

3.Fill the water tank with water up to the "max" marking.

4.Put the water tank back in the holder again, keeping it straight, and fit the cover of the water tank.

General information

The factory settings of the fully automatic coffee machine are programmed for optimal performance.

■The appliance switches off automatically after a specific time.

■Whenever a button is pressed, a signal sounds. It can be switched off.~ "Settings" on page 17

■When the appliance is used for the first time, after running a service programme or has not been operated for a long period, the first beverage will not have the full aroma and should not be consumed.

■After commissioning the appliance, you will only achieve a suitably thick and stable "crema" after the first few cups have been dispensed.

■If the appliance is in use for a long period of time, water droplets will form on the ventilation slots. This is normal.

■Escaping steam is not a fault but due to the design of the machine.

Before using your new appliance, you should check and select the water hardness.~ "Settings" on page 17

12

1 Operating the

appliance

Operating the applianceIn this section, you will learn how to make beverages with coffee and milk. It contains information about settings, water filters and adjustment of the grinding level, in addition to frost protection.

Note: Freshly prepared beverages may be very hot.

Preparing coffee using freshly ground beans

You can choose between Espresso and Caffe crema. ~ "Preparing drinks with

milk" on page 13

The appliance is switched on. The water tank and bean container have been filled.

1.Place a cup under the outlet system.

2.Touch %repeatedly to select the required coffee strength.

3.Touch the espresso or caffe crema button.

The coffee is brewed and then dispensed into the cup.

Note: To stop dispensing the drink before the end, touch espresso or caffe crema again.

Operating the appliance en

Preparing drinks with milk

This appliance has a milk frother. You can make drinks of coffee with milk or froth up milk.

Tip: You can also use plant-based alternatives to milk, e.g. soya milk.

Notes

■The quality of the milk froth depends on the type of milk or the plant-based alternative used.

■Dried milk residues are difficult to remove so always perform cleaning.~ "Daily care and cleaning" on page 19

:Warning

Risk of burns!

The milk frother gets very hot. Hold only by the handle. After use, let it cool down first before touching it.

Coffee drinks with milk

You can choose between cappuccino and latte macchiato. When doing so, please check the position of the coffee dispenser and milk frother.

Cappuccino

Latte Macchiato

The appliance is switched on. The water tank and bean container have been filled.

13

en Operating the appliance

The milk frother is installed.

1.Fill a large cup or a large glass with approx. 100 ml milk for cappuccino and approx. 150 ml milk for latte macchiato.

2.Place a cup or a glass under the outlet system.

3.Push the coffee dispenser and milk frother right down.

4.Touch %repeatedly to select the required coffee strength.

5.Touch the cappuccino or latte macchiato button.

The milk is first frothed up in the cup or glass. The coffee is then brewed and dispensed into the cup or glass.

Note: To stop current dispensing of the drink before the end, touch cappuccino or latte macchiato again.

Frothing up milk

The appliance is switched on. The water tank has been filled.

The milk frother is installed.

1.Fill a large cup or a large glass with approx. 100 ml milk.

2.Place a cup or a glass under the outlet system.

3.Push the coffee dispenser and milk frother right down.

4.Touch the milk button. The milk is frothed up.

Note: To stop the process before the end, touch milkagain.

Adjusting beverage settings

Adjusting beverage settingsCoffee strength

Before making a drink, you can adjust the coffee strength:

To do so, touch %to select the strength you require.

mild

regular

strong

Note: The coffee strength selected is then active for all drinks made with coffee.

Filling level

You can adjust the filling level of your drinks.

Press and hold espresso or caffe crema for 3 seconds.

Dispensing takes place, with the button selected flashing.

Once the required filling level is reached in the cup, touch the button selected to stop. The new filling level is only apparent after the next drink is dispensed.

Note: The filling level can be selected either for Espresso (25 - 60 ml) or Caffe crema (80 - 200 ml).A minimum quantity is always brewed: Espresso approx. 25 ml and Caffe crema approx. 80 ml.

14

Frothing time

You can adjust the frothing time of your drinks.

Press and hold cappuccino, latte macchiato or milk for 3 seconds.

The milk is frothed up, and the button selected flashes.

Once the required frothing time is reached, touch the button selected to stop.

Note: Setting the frothing time has no impact on the amount of coffee.

Setting the grinding level

This appliance features an adjustable grinder. This enables the grinding level of the coffee to be individually changed.

:Warning

Risk of injury!

Do not reach into the grinding unit.

Caution!

The appliance may be damaged! Only adjust the grinding level when the grinder is running!

When the grinder is in operation, use the rotary selector )2 to set the grinding level.

■Finer grinding level: turn anticlockwise. (Fig. a)

■Coarser grinding level: turn clockwise. (Fig. b)

Operating the appliance en

Notes

■The new setting will not become apparent until after the second cup of coffee.

■Set a finer grinding level with dark-roasted coffee beans and a coarser grinding level with lighter coffee beans.

15

en Operating the appliance

Water filter

Water filter~ Fig. '

A water filter lessens limescale deposits and reduces impurities in the water. The appliance also does not need to be descaled so often. Water filters are available from retailers or from customer service.

If a water filter is inserted, the appliance will show when this needs to be changed. The )symbol is flashing.

Inserting or replacing a water filter

A new water filter must be rinsed before it can be used.

The appliance is switched on. The water tank has been filled.

1.Simultaneously hold down % and calc’nClean for at least

3 seconds.

2.Touch espresso button, and "W. hardness" will be activated.

3.Touch %button and make the following selection:

with water filter

4.Immerse the water filter (opening facing up) in a container filled with water until no more air bubbles rise to the surface.

~ Fig. '

5.Then press the water filter firmly into the empty water tank.

6.Fill the water tank with water up to the "max" marking.

7.Place a container with a capacity of 1.0 litre under the outlet.

8.Touch espresso button to save the setting and activate rinsing.

9.Insert water tank.

10.Touch espresso button to save the setting and start rinsing. Water will now flow through the filter.

11.Touch calc’nClean button to exit the menu.

12.Then empty the container. The appliance is ready for use again.

Removing the water filter

If the water filter has been removed and no new one inserted, please select the appropriate water hardness. ~ "Setting

the water hardness" on page 17

Frost protection

To prevent frost damage during transportation and storage, the appliance must be completely emptied beforehand.

Info: The appliance must be ready for use and the water tank filled.

1.Place a large container under the outlet of the milk frother and push the frother down.

2.Press and hold milk button for at least 5 seconds.

The LED in the button flashes, and the appliance now heats up.

3.As soon as steam escapes from the milk frother, remove the water tank.

4.Allow the appliance to cool down. Wait until 'symbol and all LEDs are flashing.

5.Use k button to switch the appliance off.

6.Empty the water tank and the drip tray and thoroughly clean the appliance.

The appliance can now be transported or stored.

Note: The brewing unit is now secured and cannot be removed.

16

1 Settings

SettingsThis appliance has different factory settings. You can customise the settings on the appliance.

Note: If no button is pressed within 90 seconds, the appliance switches to "Choose beverage" without saving. The previous setting remains unchanged.

You can select the following settings:

Automatic switch-off

Selecting automatic switch-offThe appliance switches off

automatically at a specific time after the last button was pressed. This time can be selected, with settings from

15 minutes to 4 hours possible here.

1.Simultaneously hold down % and calc’nClean for at least

3 seconds.

2.Touch caffe crema button and "Automatic switch-off" will be activated.

3.Touch %button and select the required time.

The following settings are possible:

15 minutes

30 minutes (factory setting)

1 hour

2 hours

4 hours

4.Touch caffe crema button to save the setting.

5.Touch calc’nClean button to exit the menu.

Settings en

Switching the audible signal on/off

Whenever a button is pressed, an audible signal sounds.

This can be switched on or off.

1.Simultaneously hold down % and calc’nClean for at least

3 seconds.

2.Touch cappuccino button, and "Signal tone" menu will be activated.

3.Touch %button and switch signal tone on or off.

On (factory setting)

Off

4.Touch cappuccino button to save the setting.

5.Touch calc’nClean button to exit the menu.

Setting the water hardness

It is important to set the water hardness correctly so that the appliance indicates in good time when the descaling programme should be run. The preset water hardness is level 4.

You can check the water hardness using the enclosed test strip or by asking your local water supplier.

1.Briefly immerse the enclosed test strip in fresh tap water, leave it to drip and read off the result after 1 minute.

2.Simultaneously hold down % and calc’nClean for at least

3 seconds.

3.Touch espresso button, and "W. hardness" menu will be activated.

17

en Settings

4.Touch %button and select the water hardness.

The following settings are possible:

W. hardness 1

W. hardness 2

W. hardness 3

W. hardness 4 (factory setting)

Water filter (when used)

H2O-softener (if available)

5.Touch espresso button to save the setting.

6.Touch calc’nClean button to exit the menu.

The table shows the allocation of the levels to the different degrees of water hardness:

Setting	Degree of water hardness
	German (°dH)	French (°fH)
1	1-7	1-13
2	8-14	14-25
3	15-21	26-38
4	22-30	39-54

Subsequent changes to the water hardness can be made at any time.

Note: When using the water filter (see section "Accessories"), proceed as follows. ~ "Water filter" on page 16

Factory reset

If you set the appliance back to the factory settings, you will lose your own settings.

1.Simultaneously hold down % and calc’nClean for at least

3 seconds.

2.Touch latte macchiato button.

The factory settings are reactivated.

3.Touch calc’nClean button to exit the menu.

18

D Daily care and cleaning

Daily care and cleaningWith good care and cleaning, your appliance will remain fully functioning for a long time to come. In this section, you will learn how to correctly clean and care for your appliance.

:Warning

Risk of electric shock!

Before cleaning the appliance, pull out the mains plug. Never immerse the appliance in water. Do not use a steam cleaner.

Cleaning agent

Please observe the following information to ensure that the different surfaces are not damaged by using the wrong type of cleaning agent.

Do not use:

■Harsh or abrasive cleaning agents.

■Any cleaning agents containing alcohol or spirits.

■Hard scouring pads or sponges.

Notes

■New sponge cloths may contain salts. Salts can cause rust film on stainless steel. Wash new sponge cloths thoroughly before use.

■Always remove any limescale, residues of coffee or milk, cleaning or descaling solution immediately.This residue may cause corrosion.

Daily care and cleaning en

Caution!

Not all of the appliance's components can be cleaned in the dishwasher.

~ Fig. % - '

Not dishwasher-safe:

Water tank

Cover for water tank

Aroma lid

Brewing unit

Drip tray

Dishwasher-safe:

Drip plate

Drip grate

Coffee grounds container

max. Float 60°C

Milk frother

Cover for milk frother

Cleaning the appliance

1.Wipe down the outside of the appliance with a soft, damp cloth.

2.Clean the control panel using a micro-fibre cloth.

3.Wipe down the coffee dispenser if required after dispensing each beverage.

Notes

■If the appliance is cold when switched on or if it is switched off after dispensing coffee, it rinses automatically.The system is therefore self-cleaning.

■If the appliance has not been used for a long period of time (e.g. while you are on holiday), clean the entire appliance thoroughly, including the milk frother, trays and brewing unit.

19

en Daily care and cleaning

Cleaning the drip tray and coffee grounds container

~ Fig. %

Note: The drip tray and coffee grounds container should be emptied and cleaned every day in order to prevent deposits.With frequent use also empty from time to time as soon as the float is clearly visible if or the relevant symbol lights up.

1.Open the door.

2.Pull the drip tray with the coffee grounds container forwards and out.

3.Remove the drip plate with grate.

4.Empty and clean the drip tray and coffee grounds container.

5.Wipe out the inside of the appliance (area of drip tray).

Cleaning the milk system

Cleaning the milk systemThe milk system must be cleaned after each use to remove residues.

:Warning

Risk of burns!

The milk frother gets very hot. Hold only by the handle. After use, let it cool down first before touching it.

1.Fill a glass half-full with water and place under the outlet system.

2.Push the milk frother right down.

3.Touch the milk button to clean the milk system.

4.Push the milk frother right up and allow it to cool down.

5.Dismantle the milk frother into its individual parts and clean thoroughly.

~ Fig. &

6.Dry the individual parts, reassemble and fit back onto the appliance.

Notes

■To stop the process before the end, touch milk again.

■All parts of the milk system should be cleaned in the dishwasher. Detergent residues in the milk system must be thoroughly removed following the rinsing process.

Cleaning the brewing unit

~ Fig. $, ~ Fig. %

In addition to automatic cleaning, the brewing unit should be removed regularly for cleaning.

Caution!

Clean the brewing unit without detergent or products containing vinegar or acid and do not place in the dishwasher.

Remove the brewing unit:

1.Switch off the appliance.

2.Open the door to the brewing chamber.

3.Remove the coffee grounds container.

4.Push the red lever up, grasp the brewing unit by the handle and pull forwards carefully.

5.Rinse the brewing unit thoroughly under warm, running water.

6.Clean the interior of the appliance thoroughly with a damp cloth, removing any coffee residues.

7.Allow the brewing unit and the interior of the appliance to dry.

Insert the brewing unit:

1.Hold the brewing unit only by the handle.

2.Push the red lever up, position the brewing unit underneath and slide back as far as it will go. The lever must snap into place.

3.Insert the coffee grounds container again and close the door.

Important: If the brewing unit has not been inserted, or the brewing unit or drip tray not inserted correctly, it will not be possible to close the door.

20

. Service programme

Service programmeThe calc’nClean button will light up every so often, with the exact frequency depending on the water hardness and usage of the appliance.

The appliance should be immediately cleaned and descaled using the programme.

Notes

■Important: If the appliance is not cleaned and descaled in good time, it may be damaged.

■Caution! For each of the service programmes, use Calc’nClean descaling and cleaning agents as described in the instructions and observe the (relevant) safety information.

■Do not drink the liquids.

■Never use citric acid, vinegar or any vinegar-based agents to descale the appliance.

■For cleaning and descaling, only use the tablets intended for such purposes.They have been specially developed for this appliance, and new stocks can be ordered through customer service. ~ "Accessories" on page 11

■Never insert descaling tablets or other products into the brewing unit.

■Never interrupt the service programme.

■Prior to starting a service programme, remove, clean and re-insert the brewing unit. Clean the milk frother.

■At the end of a service programme, wipe down the appliance using a soft, damp cloth to immediately remove any descaler residue. This residue may cause corrosion.

■New sponge cloths may contain salts. Salts can cause rust film on stainless steel, so cloths must always be washed out thoroughly before use.

Service programme en

■Using a water filter increases the intervals until a service programme needs to be performed.

■If the service programme is interrupted, e.g. by a power failure, 'and calc’nClean will light up.

Then proceed as follows:

1.Rinse out the water tank.

2.Pour in fresh, still water up to the "max" marking.

3.Touch the calc’nClean button.

The programme starts and rinses the appliance.Duration: approx.

2 minutes.

4.Empty, clean and re-insert the drip tray. Close the door.

The programme has finished. The appliance is ready for use again.

21

en Service programme

Starting Calc’nClean

Calc’nClean service programmeDuration: approx. 40 minutes

1.Press and hold the calc’nClean button for approx. 5 seconds.

(symbol lights up.

2.Open the door, remove the drip tray and coffee grounds container and empty.

3.Remove and clean the brewing unit.

4.Place a Siemens cleaning tablet in the brewing unit and re-insert the unit.

5.Re-insert the drip tray and coffee grounds container and close the door.

'symbol lights up.

6.Remove the water filter (if there is one).

7.Pour 0.5 litres of lukewarm water into the empty water tank up to the mark and dissolve a Siemens descaling tablet in it.

8.Re-insert the water tank and place a large container (approx. 1 litre) under the outlet system.

9.calc’nClean flashes, touch calc’nClean.

The programme starts, cleans and descales the appliance. calc’nClean pulses. Duration approx. 20 minutes. (symbol lights up.

10.Empty the container, open the door, empty the drip tray and re-insert.

11.Close the door and place a container under the outlet system.

'symbol lights up.

12.Clean the water tank and replace the water filter (if removed).

~ Fig. '

13.Fill with fresh, still water up to the "max" mark. Place the container under the outlet system again.

14.calc’nClean flashes, touch calc’nClean.

The programme starts and then cleans and rinses the appliance. calc’nClean pulses.

(symbol lights up.

15.Empty, clean and re-insert the drip tray and coffee grounds container.

The programme has finished. The appliance is ready for use again.

22

3 Trouble shooting

Trouble shootingFaults often have simple explanations. Before calling the customer service,

Fault table

Trouble shooting en

please refer to the fault table and attempt to correct the fault yourself.

Please read through the safety information at the beginning of these instructions.

	Problem	Reason	Remedial action
	The appliance no longer	Fault in the appliance.	Pull out the mains plug, wait
	responds.		5 seconds, plug it back in.
	Coffee or milk froth quality var-	Build-up of limescale in the	Descale the appliance in accordance
	ies considerably.	appliance.	with the instructions.
	The individually selected	The grinding level is too fine.	Set a coarser grinding level.
	per-cup quantity is not reached.	Heavy build-up of limescale in	Descale the appliance as described in
	Coffee dispensing slows to a
		the appliance.	the instructions.
	trickle or stops completely
		Air in the water filter.	Immerse the water filter in water until
			no more air bubbles escape, then
			insert the filter again.
	The quality of the milk froth var-	The quality of the milk froth	Optimise the result by selecting your
	ies.	depends on the type of milk or	milk or plant-based alternative as
		the plant-based alternative	appropriate.
		used.
	No coffee dispensed, only	An empty bean container is not	Add coffee beans
	water.	detected by the appliance.	Note: The appliance will adjust to the
			coffee beans on the next dispensing
			process.
		The coffee shaft on the brewing	Clean the brewing unit. ~ "Cleaning
		unit is blocked.	the brewing unit" on page 20
		Beans are not falling into the	Gently tap the bean container.Possibly
		grinding unit (beans too oily).	change the type of coffee. When the
			bean container is empty, wipe it with a
			dry cloth.
	Coffee has no “crema”.	Unsuitable type of coffee.	Use a type of coffee with a higher pro-
			portion of robusta beans.
		The beans are no longer freshly	Use fresh beans.
		roasted.
		The grinding level is not suita-	Set a finer grinding level.
		ble for the coffee beans.
	The coffee is too "acidic".	Grinding level set too coarse.	Set a finer grinding level.
		Unsuitable type of coffee.	Use a darker roast.
	The coffee is too "bitter".	Coffee is ground too fine.	Set a coarser grinding level.
		Unsuitable type of coffee.	Change the type of coffee.

23

en Trouble shooting

The coffee tastes "burnt".	Coffee is ground too fine.	Set a coarser grinding level.
	Unsuitable type of coffee.	Change the type of coffee.
Milk/blended milk drinks too	Too little milk in glass or cup.	Use more milk or adjust frothing time.
hot.
Milk froth too thin, loud sucking
noise.
Milk/blended milk drinks too	Too much milk in glass or cup.	Use less milk or adjust frothing time.
cold.

No milk/milk froth dispensed.	The milk frother is soiled.
	The milk frother is not inserted
	in the milk.

Clean the milk frother in the dishwasher. ~ "Cleaning the milk

system" on page 20

Use more milk, check whether the milk frother is inserted in the milk. Slide the outlet system right down.

The water filter does not stay in position in the water tank.

The water filter is not mounted correctly.

Immerse the water filter into water until no more air bubbles escape; insert the filter again.

Firmly press the water filter straight down into the tank connection.

Several buttons flashing, a loud	Water tank missing or wrongly	Insert water tank correctly.
noise can be heard.	inserted.
Water dripped onto the inner	Drip tray removed too early.	Wait a few seconds after the last drink
floor of the appliance when the		was dispensed before removing the
drip tray was removed.		drip tray.
The brewing unit cannot be	The brewing unit is not in the	Switch the appliance on again.
removed.	removal position (e.g. frost pro-
	tection activated).
The appliance cannot be oper-	The appliance is in demo mode.	Hold kbutton for at least 5 seconds
ated, LEDs lit up or flashing.		to deactivate demo mode.
The grinder will not start.	The appliance is too hot.	Wait 1 hour so the appliance can cool
		down.
(LED flashes.	The door is not properly closed.	Press the door firmly closed.
	The appliance is too hot.	Wait 1 hour so the appliance can cool
		down.
(LED lit up despite empty	Emptying is not detected when	When the appliance is switched on,
drip tray - what to do?	the appliance is off.	remove and re-insert the drip tray.

24

		Trouble shooting en
'LED lit up despite water	Water tank wrongly inserted.	Insert water tank correctly.
tank being full.	Carbonated water in the water	Fill the water tank with fresh tap water.
	tank.
	Float is stuck in the water tank.	Remove the water tank and clean thor-
		oughly.
	New water filter not rinsed	Rinse the water filter according to the
	according to the instructions.	instructions and then switch on.
	Air in the water filter.	Immerse the water filter (opening up)
		in water until no more air bubbles
		escape; insert the filter again.
		~ "Inserting or replacing a water
		filter" on page 16
	Water filter is old.	Insert a new water filter.
	Limescale deposits in the water	Thoroughly clean the water tank and
	tank can block up the system.	start calc'nClean. ~ "Calc’nClean
		service programme" on page 22
'LED flashes and all bever-	Water tank is missing or not	Insert water tank correctly.
age LEDs flashing.	inserted correctly.
	The pipe system in the appli-	Insert water tank correctly.
	ance is dry.	Fill the water tank with fresh tap water.
		Do not fill with carbonated water.
	Air in the water filter.	Immerse the water filter (opening up)
		in water until no more air bubbles
		escape; insert the filter again.
		~ "Inserting or replacing a water
		filter" on page 16
All LEDs flashing.	Incorrect voltage in building.	Only operate the appliance at
		220V-240V.
', (and calc’nClean LEDs	The ambient temperature is too	Operate the appliance at temperatures
flashing.	cold.	> 5 °C.
(and %LEDs flashing.	Brewing unit very heavily soiled	Clean brewing unit if possible and
	or brewing unit cannot be	switch appliance off and back on
	removed.	again.
%LEDs flashing.	Fault in the appliance.	Restart appliance.
calc’nClean and )light up.	The descaling process has	Continue the descaling process.
	been interrupted.	~ "Service programme" on page 21
Display "calc'nClean" keeps on	The water is too hard.	Insert water filter and activate accord-
appearing.		ing to the instructions. ~ "Water
		filter" on page 16

If you are unable to solve the problem, always call the hotline.

You will find the telephone numbers at the back of these instructions

--------

25

en Customer service

4 Customer service

Customer serviceTechnical data

Power connection (voltage – frequency)	220–240 V , 50/60 Hz
Power rating	1300 W
Maximum static pump pressure	15 bar
Maximum water tank capacity (without filter)	1.3 l
Maximum capacity of the coffee bean container	≈ 250 g
Length of the power cable	100 cm
Dimensions (H x W x D)	37.3 x 24.9 x 42.8 cm
Weight, empty	approx. 8–9 kg
Type of grinder	Ceramic/steel

E number and FD number

When calling us, please give the full product number (E no.) and the production number (FD no.) so that we can provide you with the correct advice. These numbers can be found on the rating plate `. (~ Fig. ")

To save time, you can make a note of the data for your appliance and the telephone number for customer service here, should this be required.

	E no.	FD
		Number
	Customer service O

The contact data for customer service in all countries can be found at the back of these instructions.

Guarantee

The guarantee conditions for this appliance are as defined by our representative in the country in which it is sold. Details regarding these conditions can be obtained from the dealer from whom the appliance was purchased. The bill of sale or receipt must be produced when making any claim under the terms of this guarantee.

Changes reserved.

26

Table des matières

frMode d’emploi

8 Utilisation conforme . . . . . . . . . 28

( Précautions de sécurité importantes . . . . . . . . . . . . . . . . 28

7 Protection de l'environnement . 30

Économie d'énergie . . . . . . . . . . . . . 30 Elimination écologique . . . . . . . . . . . 30

* Présentation de l'appareil . . . . . 31

Contenu de l’emballage . . . . . . . . . . 31 Configuration et éléments. . . . . . . . . 31 Eléments de commande. . . . . . . . . . 32

_ Accessoires . . . . . . . . . . . . . . . . 33

K Avant la première utilisation. . . 33

Installation et raccordement de l’appareil . . . . . . . . . . . . . . . . . . . . . . 33

Mise en service de l’appareil . . . . . . 33

1 Utilisation de l’appareil . . . . . . . 35

Préparer une boisson à base de café en grains fraîchement moulus . . . . . 35

Préparation de boissons lactées . . . 35 Ajustage des réglages des boissons. 36 Filtre à eau . . . . . . . . . . . . . . . . . . . . 38 Protection contre le gel. . . . . . . . . . . 38

1 Réglages. . . . . . . . . . . . . . . . . . . 39

Coupure automatique . . . . . . . . . . . 39 Activer/désactiver le signal sonore. . 39 Réglage de la dureté de l'eau . . . . . 39 Factory reset. . . . . . . . . . . . . . . . . . . 40

fr

D Entretien et nettoyage

quotidiens . . . . . . . . . . . . . . . . . 41

Nettoyants . . . . . . . . . . . . . . . . . . . . . 41 Nettoyage de l'appareil . . . . . . . . . . . 42

Nettoyer le bac d'égouttement et le

bac à marc de café. . . . . . . . . . . . . . 42 Nettoyage du système à lait . . . . . . . 42 Nettoyer l’unité de percolation. . . . . . 43

. Programme d’entretien . . . . . . . 44

Démarrer Calc’nClean . . . . . . . . . . . . 45

3 Anomalies, que faire ? . . . . . . . 46

4 Service après-vente . . . . . . . . . 50

Données techniques . . . . . . . . . . . . . 50 Numéro E et numéro FD . . . . . . . . . . 50 Garantie. . . . . . . . . . . . . . . . . . . . . . . 50

27

fr Utilisation conforme

8 Utilisation conforme

Utilisation conformeContrôler l'état de l'appareil après l'avoir déballé. Ne pas le raccorder s'il présente des avaries de transport.

Cet appareil est destiné exclusivement à une utilisation domestique et non professionnelle.

N’utilisez l’appareil que dans des pièces intérieures à température ambiante et jusqu’à 2 000 m au-dessus du niveau de la mer.

(Précautions de sécurité importantes

Précautions de sécurité importantesVeuillez lire attentivement la

notice d’utilisation, suivre les instructions qu’elle contient et conserver la notice. Si l’appareil change de propriétaire, remettez-lui cette notice.

L'appareil peut être utilisé par des enfants à partir de 8 ans et par des personnes ayant des capacités physiques, sensorielles ou mentales restreintes ou ayant un manque d'expérience et/ou de connaissances s'ils sont sous surveillance ou ont été informés de la manipulation sûre de l'appareil et ont compris les dangers qui en résultent. Il faut maintenir les enfants de moins de 8 ans à l’écart de l’appareil et du cordon de branchement et ne pas leur permettre d’utiliser l’appareil. Ne jamais permettre aux enfants de jouer avec l’appareil. Le nettoyage et l’entretien incombant à l’utilisateur ne doivent pas être effectués par des enfants sauf s’ils ont 8 ans ou plus et sont surveillés.

28

:Mise en garde Risque d’électrocution !

■L'appareil doit être branché uniquement sur un réseau à courant alternatif par l'intermédiaire d'une prise secteur installée de manière conforme et disposant d'une connexion à la terre. S'assurer que le système à conducteur de protection de l’installation électrique de la maison est conforme.

Risque d’électrocutionNe brancher! et faire

■

fonctionner l’appareil que conformément aux indications figurant sur la plaque signalétique. En cas d'endommagement du cordon d'alimentation secteur, celui-ci doit être remplacé par le service après-vente.

Risque d’électrocutionNe l’utiliser! que si le cordon

■

d’alimentation et l’appareil ne présentent aucun dégât. En cas de défaut, débrancher immédiatement la fiche secteur ou coupez la tension du réseau.

Risque d’électrPourcution ! éviter tous risques, les

■

réparations de l’appareil sont réservées à notre service après-vente.

Risque d’électrocutionNe plongez! jamais l’appareil

■

ou le cordon d’alimentation dans l’eau.

Risque d’électrocutionLe raccordement! de

■

l’appareil ne doit jamais entrer en contact avec des liquides.

Précautions de sécurité importantes fr

Risque d’électrocutionLes !instructions de nettoyage

■

spéciales figurant dans les notices sont à respecter.

:Mise en garde

Danger par magnétisme !

L'appareil contient des aimants permanents qui peuvent exercer une influence sur les implants électroniques tels que les stimulateurs cardiaques ou les pompes à insuline. Merci aux porteurs d'implants électroniques de respecter une distance d'au moins 10 cm entre eux et l'appareil et le réservoir d'eau retiré.

:Mise en garde

Risque d'étouffement !

Ne permettez jamais aux enfants de jouer avec les matériaux d’emballage. Rangez les petites pièces de manière sûre, elles pourraient être avalées.

:Mise en garde Risque de brûlures !

■Le système à lait devient très chaud. Après utilisation, laisser refroidir avant de le toucher.

Risque deLesbrûlure ! surfaces peuvent rester

■

chaudes pendant un certain temps après l’utilisation de l’appareil.

Risque deLesbrûlure ! boissons fraîchement

■

préparées sont très chaudes.Si nécessaire, les laisser un peu refroidir.

29

fr Protection de l'environnement

:Mise en garde Risque de blessure !

■L’utilisation inappropriée de l'appareil peut entraîner des blessures.

Risque deNeblessure ! pas glisser les doigts à

■

l’intérieur du broyeur.

:Mise en garde

Risque d’incendie !

■ L'appareil devient chaud.

Risque d’incendieNe! jamais utiliser l'appareil

■

dans une armoire.

7 Protection de l'environnement

Protection de l'environnemntÉconomie d'énergie

■Éteindre l'appareil quand celui-ci n'est pas utilisé.

■Régler l'intervalle d'arrêt automatique sur la plus petite valeur.

■Dans la mesure du possible, ne jamais interrompre la distribution de café ou de mousse de lait. Une interruption conduit à une hausse de la consommation énergétique et à un remplissage accéléré des bacs collecteurs.

■Détartrer régulièrement l’appareil pour prévenir les dépôts de tartre. Les dépôts de tartre conduisent à une hausse de la consommation énergétique.

Elimination écologique

Eliminez l'emballage en respectant l'environnement.

Cet appareil est marqué selon la directive européenne 2012/19/UE relative aux appareils électriques et électroniques usagés (waste electrical and electronic equipment - WEEE).

La directive définit le cadre pour une reprise et une récupération des appareils usagés applicables dans les pays de la CE.

S’informer auprès du revendeur sur la procédure actuelle de recyclage.

30