XL-HF201P
Sharp XL-HF201P, XL-HF301P, XL-HF201BK, XL-HF301T, XL-HF201P(BK) Operation Manual
...
ENGLISH
MODEL
XL-HF201P(BK) / XL-HF301P(T
)
HI FI COMPONENT SYSTEM
OPERATION MANUAL
XL-HF201P(BK) Hi Fi Component System consisting of XL-HF201P(BK) (main unit) and CP-HF200 (speaker system).
XL-HF301P(T) Hi Fi Component System consisting of XL-HF301P(T) (main unit) and CP-HF301 (speaker system).
Accessories
Please confi rm that the following accessories are included.
Special Note
Supply of this product does not convey a license nor imply any right to distribute content created with this product in
revenue-generating broadcast systems (terrestrial, satellite, cable and/or other distribution channels), revenue generating
streaming applications (via Internet, intranets and/or other networks), other revenue-generating content distribution
systems (pay-audio or audio-on-demand applications and the like) or on revenue-generating physical media (compact
discs, digital versatile discs, semiconductor chips, hard drives, memory cards and the like). An independent license for
such use is required. For details, please visit http://mp3licensing.com
MPEG Layer-3 audio coding technology licensed from Fraunhofer IIS and Thomson.
Printed in Malaysia
12D R KI
1
“Made for iPod,” “Made for iPhone,” and “Made for iPad” mean that an electronic
accessory has been designed to connect specifi cally to iPod, iPhone, or iPad,
respectively, and has been certifi ed by the developer to meet Apple performance
standards. Apple is not responsible for the operation of this device or its
compliance with safety and regulatory standards. Please note that the use of this
accessory with iPod, iPhone, or iPad may affect wireless performance.
TINSZB282AWZZ
iPhone, iPod, iPod classic, iPod nano, and
iPod touch are trademarks of Apple Inc.,
registered in the U.S. and other countries. iPad is
a trademark of Apple Inc.
XL-HF201 XL-HF301
CD/USB
Adaptors for
iPhone x 3
GCOVAA238AWSA
GCOVAA239AWSA
GCOVAA294AWSA
Remote control
x 1
RRMCGA264AWSA
AM loop antenna
x 1
QANTL0005AWZZ
FM antenna x 1
FANT1535A
Speaker wires x 2
QCNWHA035AWPZ
(for XL-HF301P(T))
QCNWHA041AWPZ
(for XL-HF201P(BK))
Stand for iPad x 1
GITAUA014AW01
The illustrations printed in this operation manual are for the model XL-HF201P(BK).
XL-HF201P_HF301P_US_cover.indd 1XL-HF201P_HF301P_US_cover.indd 1 3/7/2012 11:09:00 AM3/7/2012 11:09:00 AM
E-1
SPECIAL NOTES
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK). NO USERSERVICEABLE PARTS INSIDE. REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL.
Explanation of Graphical Symbols:
The lightning fl ash with arrowhead symbol,
within an equilateral triangle, is intended to
alert the user to the presence of uninsulated
“dangerous voltage” within the product’s
enclosure that may be of suffi cient
magnitude to constitute a risk of electric
shock to persons.
The exclamation point within an equilateral
triangle is intended to alert the user to
the presence of important operating and
maintenance (servicing) instructions in the
literature accompanying the appliance.
WARNING : TO REDUCE THE RISK OF FIRE OR ELECTRIC
SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR
MOISTURE.
This product is classifi ed as a CLASS 1 LASER PRODUCT
Caution - Use of any controls, adjustments or procedures
other than those specifi ed herein may result in hazardous
radiation exposure.
Note to CATV system installer:
This reminder is provided to call the CATV system installer’s
attention to Article 820-40 of the National Electrical Code that
provides guidelines for proper grounding and, in particular,
specifi es that the cable ground shall be connected to the
grounding system of the building, as close to the point of cable
entry as practical.
NOTE
This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part 15
of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause
harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be
determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or
more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and
receiver.
Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV
technician for help.
WARNING
FCC Regulations state that any unauthorized changes or
modifi cations to this equipment not expressly approved by
the manufacturer could void the user’s authority to operate
this equipment.
FOR YOUR RECORDS
For your assistance in reporting this unit in case of loss or theft,
please record below the model number and serial number which
are located on the rear of the unit. Please retain this information.
Model number ..............................................
Serial number ..............................................
Date of purchase ..............................................
Place of purchase ..............................................
IMPORTANT SAFETY INSTRUCTIONS
Electricity is used to perform many useful functions, but
it can also cause personal injuries and property damage
if improperly handled. This product has been engineered
and manufactured with the highest priority on safety.
However, improper use can result in electric shock and/or
fi re. In order to prevent potential danger, please observe
the following instructions when installing, operating and
cleaning the product. To ensure your safety and prolong
the service life of this product, please read the following
precautions carefully before use.
1) Read these instructions.
2) Keep these instructions.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use this apparatus near water.
6) Clean only with dry cloth.
7) Do not block any ventilation openings. Install in
accordance with the manufacturer’s instructions.
8) Do not install near any heat sources such as radiators,
heat registers, stoves, or other apparatus (including
amplifi ers) that produce heat.
9) Do not defeat the safety purpose of the polarized or
grounding-type plug. A polarized plug has two blades
with one wider than the other. A grounding type plug
has two blades and a third grounding prong. The wide
blade or the third prong are provided for your safety. If
the provided plug does not fi t into your outlet, consult
an electrician for replacement of the obsolete outlet.
10) Protect the power cord from being walked on or
pinched particularly at plugs, convenience receptacles,
and the point where they exit from the apparatus.
XL-HF201P_HF301P_US.indd 1XL-HF201P_HF301P_US.indd 1 3/7/2012 10:35:19 AM3/7/2012 10:35:19 AM
E-2
IMPORTANT SAFETY INSTRUCTIONS (continued)
11) Only use attachments/accessories specifi ed by the
manufacturer.
12) Use only with the cart, stand, tripod,
bracket, or table specifi ed by the
manufacturer, or sold with the apparatus.
When a cart is used, use caution when
moving the cart/apparatus combination
to avoid injury from tip-over.
13) Unplug this apparatus during lightning storms or when
unused for long periods of time.
14) Refer all servicing to qualifi ed service personnel.
Servicing is required when the apparatus has been
damaged in any way, such as power-supply cord or
plug is damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus has
been exposed to rain or moisture, does not operate
normally, or has been dropped.
Additional Safety Information
15) Power Sources - This product should be operated
only from the type of power source indicated on the
marking label. If you are not sure of the type of power
supply to your home, consult your product dealer or
local power company. For product intended to operate
from battery power, or other sources, refer to the
operating instructions.
16) Overloading - Do not overload wall outlets, extension
cords, or integral convenience receptacles as this can
result in a risk of fi re or electric shock.
17) Object and Liquid Entry - Never push objects of
any kind into this product through openings as they
may touch dangerous voltage points or short-out
parts that could result in a fi re or electric shock.
To prevent fi re or shock hazard, do not expose this
appliance to dripping or splashing. No objects fi lled
with liquids, such as vases, shall be placed on the
apparatus.
18) Damage Requiring Service - Unplug this product from
the wall outlet and refer servicing to qualifi ed service
personnel under the following conditions:
When the AC cord or plug is damaged,a)
If liquid has been spilled, or objects have fallen b)
into the product,
If the product has been exposed to rain or water,c)
If the product does not operate normally by d)
following the operating instructions. Adjust only
those controls that are covered by the operating
instructions as an improper adjustment of other
controls may result in damage and will often
require extensive work by a qualifi ed technician to
restore the product to its normal operation,
If the product has been dropped or damaged in e)
any way, and
When the product exhibits a distinct change in f)
performance - this indicates a need for service.
19) Replacement Parts - When replacement parts are
required, be sure the service technician has used
replacement parts specifi ed by the manufacturer or
have the same characteristics as the original part.
Unauthorized substitutions may result in fi re, electric
shock, or other hazards.
20) Safety Check - Upon completion of any service or
repairs to this product, ask the service technician to
perform safety checks to determine that the product is
in proper operating condition.
21) Wall or ceiling mounting - When mounting the product
on a wall or ceiling, be sure to install the product
according to the method recommended by the
manufacturer.
22) Power Lines - An outside antenna system should not
be located in the vicinity of overhead power lines or
other electric light or power circuits, or where it can
fall into such power lines or circuits. When installing
an outside antenna system, extreme care should
be taken to keep from touching such power lines or
circuits as contact with them might be fatal.
23) Outdoor Antenna Grounding - If an outside antenna
or cable system is connected to the product, be sure
the antenna or cable system is grounded so as to
provide some protection against voltage surges and
built-up static charges. Article810 of the National
Electrical Code, ANSI/NFPA 70, provides information
with regards to proper grounding of the mast and
supporting structure, grounding of the cord-in wire to
an antenna discharge unit, connection to grounding
electrodes, and requirements for the grounding
electrode.
24) Protective Attachment Plug - The product is equipped
with an attachment plug having overload protection.
This is a safety feature. See Instruction Manual
for replacement or resetting of protective device.
If replacement of the plug is required, be sure the
service technician has used a replacement plug
specifi ed by the manufacturer that has the same
overload protection as the original plug.
25) Stand - Do not place the product on an unstable
cart, stand, tripod or table. Placing the product on an
unstable base can cause the product to fall, resulting
in serious personal injuries as well as damage to the
product. Use only a cart, stand, tripod, bracket or
table recommended by the manufacturer or sold with
the product. When mounting the product on a wall,
be sure to follow the manufacturer’s instructions. Use
only the mounting hardware recommended by the
manufacturer.
Example of antenna grounding asper
National Electrical Code, ANSI/NFPA 70
ANTENNA CORD IN WIRE
GROUND
CLAMP
ANTENNA DISCHARGE UNIT
(NEC SECTION 810-20)
GROUNDING CONDUCTORS
(NEC SECTION 810-21)
GROUND CLAMPS
POWER SERVICE GROUNDING
ELECTRODE SYSTEM
(NEC ART250, PARTH)
ELECTRIC
SERVICE
EQUIPMENT
NEC - NATIONAL ELECTRICAL CODE
S2898A
XL-HF201P_HF301P_US.indd 2XL-HF201P_HF301P_US.indd 2 3/7/2012 10:35:20 AM3/7/2012 10:35:20 AM
E-3
For U.S. customer only
CONSUMER LIMITED WARRANTY
SHARP ELECTRONICS CORPORATION warrants to the first consumer purchaser that this Sharp brand product (the
"Product"), when ship in its original container, will be free from defective workmanship and materials, and agrees that it will,
at its option, either repair the defect or replace the defective Product or part thereof with a new or remanufactured equivalent
at no charge to the purchaser for parts or labor for the period(s) set forth below.
This warranty does not apply to any appearance items of the Product nor to the additional excluded item(s) set forth below
nor to any Product the exterior of which has been damaged or defaced, which has been subjected to improper voltage or
other misuse, abnormal service or handling, or which has been altered or modified in design or construction.
In order to enforce the rights under this limited warranty, the purchaser should follow the steps set forth below and provide
proof of purchase to the servicer.
The limited warranty described herein is in addition to whatever implied warranties may be granted to purchasers by law.
ALL IMPLIED WARRANTIES INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR USE ARE
LIMITED TO THE PERIOD(S) FROM THE DATE OF PURCHASE SET FORTH BELOW. Some states do not allow
limitations on how long an implied warranty lasts, so the above limitation may not apply to you.
Neither the sales personnel of the seller nor any other person is authorized to make any warranties other than those
described herein, or to extend the duration of any warranties beyond the time period described herein on behalf of Sharp.
The warranties described herein shall be the sole and exclusive warranties granted by Sharp and shall be the sole and
exclusive remedy available to the purchaser. Correction of defects, in the manner and for the period of time described
herein, shall constitute complete fulfillment of all liabilities and responsibilities of Sharp to the purchaser with respect to the
Product, and shall constitute full satisfaction of all claims, whether based on contract, negligence, strict liability or otherwise.
In no event shall Sharp be liable, or in any way responsible, for any damages or defects in the Product which were caused
by repairs or attempted repairs performed by anyone other than an authorized servicer. Nor shall Sharp be liable or in any
way responsible for any incidental or consequential economic or property damage. Some states do not allow the exclusion
of incidental or consequential damages, so the above exclusion may not apply to you.
THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS. YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY
FROM STATE TO STATE.
Model Specific Section
Your Product Model Number & Description:
Warranty Period for this Product:
Additional Item(s) Excluded from Warranty Coverage
(if any):
Where to Obtain Service:
What to do to Obtain Service:
XL-HF201P(BK) / XL-HF301P(T) HI FI COMPONENT SYSTEM
(Be sure to have this information available when you need
service for your Product.)
One (1) year parts and labor from the date of purchase.
Non-functional accessories, supplies, and consumable
items.
At a Sharp Authorized Servicer located in the United States.
To find a location of the nearest Sharp Authorized Servicer,
call Sharp toll free at 1-800-BE-SHARP.
Ship prepaid or carry in your Product to a Sharp Authorized
Servicer. Be sure to have Proof of Purchase available. If
you ship the Product, be sure it is insured and packaged
securely.
TO OBTAIN SUPPLY, ACCESSORY OR PRODUCT INFORMATION, CALL 1-800-BE-SHARP
SHARP ELECTRONICS CORPORATION
Sharp Plaza, Mahwah, New Jersey 07495-1163
Precautions
Please ensure that the equipment is positioned in a well ventilated area
and ensure that there is at least 4” (10 cm) of free space along the sides,
top and back of the equipment.
System connections
4” (10 cm)
4” (10 cm)
4” (10 cm)
4” (10 cm)
Use the unit on a fi rm, level surface free from vibration.
Place the speakers at least 12” (30 cm) away from any CRT TV to avoid
color variations across the TV screen. If the variations persist, move
the speakers further away from the TV. LCD TV is not prone to such
variation.
Keep the unit away from direct sunlight, strong magnetic fi elds, excessive
dust, humidity and electronic/electrical equipment (home computers,
facsimiles, etc.) which generate electrical noise.
Do not place anything on top of the unit.
Do not expose the unit to moisture, to temperatures higher than 140˚F
(60˚C) or to extremely low temperatures.
If your system does not work properly, disconnect the AC power cord
from the AC outlet. Plug the AC power cord back in, and then turn on
your system.
In case of an electrical storm, unplug the unit for safety.
Hold the AC power plug by the head when removing it from the AC outlet,
as pulling the cord can damage internal wires.
The AC power plug is used as a disconnect device and shall always
remain readily operable.
Do not remove the outer cover, as this may result in electric shock.
Refer internal service to your local SHARP service facility.
This unit should only be used within the range of 41˚F - 95˚F
(5˚C - 35˚C).
Warning:
The voltage used must be the same as that specifi ed on this unit. Using this
product with a higher voltage other than that which is specifi ed is dangerous
and may result in a fi re or other type of accident causing damage. SHARP will
not be held responsible for any damage resulting from use of this unit with a
voltage other than that which is specifi ed.
XL-HF201P_HF301P_US.indd 3XL-HF201P_HF301P_US.indd 3 3/7/2012 10:35:20 AM3/7/2012 10:35:20 AM
E-4
System connections (continued)
Speaker connection
For XL-HF201P(BK)
Connect the black wire to the minus (–) terminal,
and the red wire to the plus (+) terminal.
For XL-HF301P(T)
Connect the wire without insulation tube to the
minus (–) terminal, and the wire with red insulation
tube to the plus (+) terminal.
Use speakers with an impedance of 4 ohms or
more, as lower impedance speakers can damage the unit.
Do not mistake the right and the left channels. The right speaker is the
one on the right side when you face the unit.
Do not let the bare speaker wires touch each other.
Do not allow any objects to fall into or to be placed in the bass refl ex
ducts.
Do not stand or sit on the speakers. You may be injured.
Volume control
The sound level at a given volume setting depends on speaker effi ciency,
location and various other factors. It is advisable to avoid exposure to high
volume levels, which occurs while turning the unit on with the volume control
setting up high, or while continually listening at high volumes. Excessive sound
pressure from earphones and headphones can cause hearing loss.
Incorrect
Make sure to unplug the AC power cord before making any connections.
Subwoofer pre-out connection
You can connect a subwoofer with an amplifi er to the SUBWOOFER PRE
OUT jack.
Commercially available subwoofer
(amplifi er built in)
Audio cable
(commercially
available)
Audio signal
To audio
input jack
To SUBWOOFER
PRE OUT jack
Main unit
Notes:
No sound is heard from the subwoofer without a built-in amplifi er.
Subwoofer Pre-out (audio signal): 200mV / 10k ohms at 70 Hz.
Line input connection (TV, etc.)
Connect to the TV using an audio cable.
TV
To audio
output jack
Audio cable
(commercially
available)
Audio signal
To LINE input
jack
Main unit
To select Line In function:
On main unit: Press FUNCTION button repeatedly until Line In is
displayed.
On remote control: Press AUDIO/LINE (INPUT) button repeatedly until
Line In is displayed.
AC outlet
(AC 120 V ~ 60 Hz)
FM antenna
Right
speaker
Video cable (not supplied)
To video input jack
Left
speaker
Red
Black
Installing the AM loop antenna
< Assembling >
< Attaching
to the wall >
Wall
screws (not supplied)
AM loop
antenna
XL-HF201P_HF301P_US.indd 4XL-HF201P_HF301P_US.indd 4 3/7/2012 10:35:20 AM3/7/2012 10:35:20 AM
Loading...