SeaTalk/NMEA interface
The NMEA outputs of the S3 IPS course computer are restricted in use:
NMEA 1 - provides IPS commands only.
NMEA 2 - provides HDM (heading) data only.
Your system is packed with a SeaTalk/NMEA interface to provide an
additional NMEA output supporting a wider range of general NMEA data.
To obtain general NMEA data you must connect the SeaTalk/NMEA interface to the SeaTalk output of your course computer.
Note: For details of the NMEA data supported, refer to the separate handbook provided with the interface unit.
Document number: 82217-1
Date: April 2007
Raymarine plc |
Raymarine Inc. |
Anchorage Park, |
21 Manchester Street, |
Portsmouth, |
Merrimack, |
Hampshire PO3 5TD |
New Hampshire 03054-4801 |
United Kingdom |
USA |
Tel: +44 (0) 23 9269 3611 |
Tel: +1 603.881.5200 |
Fax: +44 (0) 23 9269 4642 |
Fax: +1 603.864.4576 |
|
www.raymarine.com |
|
|
S3 (G) Course Computer
IPS |
commands |
IPS DPU |
HDM data |
|
NMEA 0183 |
SeaTalk/NMEA |
Chartplotter/ |
Interface |
Radar Marpa |
|
General NMEA data
D10361-1