Page 1
Table lamp
Operation and Safety Notes
Z30618A-BS
Z30618B-BS
6
Page 2
GB / IE Operation and Safety Notes Page 4
Page 3
Z30618A-BS
1 2
2
3
4
56
Z30618B-BS
2
3
4
5
3
Page 4
Table of Contents
Introduction
Intended Use ............................................................................................. Page 5
Description of parts ................................................................................... Page 5
Technical information ................................................................................ Page 5
Included items ........................................................................................... Page 5
Safety
Safety Information ..................................................................................... Page 6
Use
Replacing a bulb ....................................................................................... Page 7
Maintenance and Cleaning .................................................... Page 8
Disposal .................................................................................................. Page 8
4 GB/IE
Page 5
Introduction
Table Lamp
Q
Introduction
The instructions for use are
to be considered as part of
the product. They contain
important information concerning safety,
use and disposal. Before using the
product, please familiarise yourself with
all of the safety information and instructions for use. The product must only be
used as described and for the stated
fields of application. If you pass the
product on to third parties, please give
them all of the documentation as well.
Q
Intended Use
This lamp is intended for use indoors
only, in dry and enclosed rooms. Other
forms of use or changes to the product
are deemed to be contrary to the intended
use and may result in risks such as the
danger of death, injuries and damage.
The manufacturer does not accept any
liability for injury or damage resulting
from use of this product contrary to its
intended use. The product is not intended
to be used for commercial purposes.
Q
Description of parts
1
Ring of lampholder
2
Lamp shade
3
Bulb
4
Mains plug
5
ON / OFF switch
6
Lamp base
Q
Technical information
Lamp voltage: 230 V ~ 50 Hz
Bulb: Energy-saving bulb,
230 V ~, E27
Rated max. power: 9 Watts
Protection class:
Dimensions:
Z30618A: approx. 13.5 x
44.6 x 13.5 cm
(w x h x d)
Z30618B: approx. 18 x 36.5 x
18 cm (w x h x d)
Q
Included items
Check that all the items and accessories
are present and that the lamp is in perfect
condition immediately after unpacking.
1 Table Lamp
1 Bulb
1 Operating instructions
5 GB/IE
Page 6
Safety
Q
Safety
Safety Information
In the case of damage resulting from
non-compliance with these operating
instructions the guarantee claim becomes
invalid! No liability is accepted for
consequential damage! In the case of
material damage or personal injury
caused by incorrect handling or noncompliance with the safety instructions,
no liability is accepted!
J
TODDLERS AND CHILDREN!
Never leave children unsupervised
with the packaging material. The
packaging material represents a
danger of suffocation. Children frequently underestimate the dangers.
Please keep children away from the
device at all times.
J This device is not a toy and should
not be played by children. Children
are not able to understand the dangers that can occur when handling
this device.
J Children or other individuals who
do not know or have no experience
of handling this device, or whose
physical, sensory or mental abilities
WARNING!
DANGER OF DEATH
AND ACCIDENTS FOR
are restricted, must not use the device
without supervision or instruction by
an individual responsible for their
safety. Children must be supervised
in order to ensure that they do not
play with the device.
CAUTION! DANGER OF
BURNS! The lamp and bulb
become hot during operation. Allow
the lamp and bulb
before you touch them.
J Never look directly into the light!
J
J Before use, ensure that the mains
J Before connecting the device to the
J Do not use the device if you find
J Please consult a specialist electrician
Please observe that the
energy-saving bulb is
not dimmable.
Avoid the danger of
death from electric
shock!
voltage available is the same as
the required operating voltage for
the device (230 Volt ~).
mains you should always check the
device and the mains lead for any
damage. A damaged device represents the danger of death from
electric shock.
any damage.
if you discover any damage or
3
3
to cool down
6 GB/IE
Page 7
Safety / Use
problems with the device, or for the
performance of repairs to the device.
J Never open any of the electrical
equipment or insert any objects into
it. Such interventions represent the
danger of death from electric shock.
J It is essential that the device does
not come into contact with water or
other liquids.
J Never touch the mains plug
4
with damp or wet hands.
J Protect the mains lead against sharp
edges, mechanical stresses and hot
surfaces.
J Never use the device in the immedi-
ate vicinity of a bathtub, shower or
swimming pool.
J If the lamp is not to be used for an
extended period (e.g. during your
holidays), pull the mains plug
4
out of the mains socket.
J
This lamp is only intend-
ed for use indoors.
Q
Use
more on to the lamp base
j Screw the ring of lampholder
back on to the lamp base
j Insert the bulb
3
into the fitting
6
.
1
6
.
and tighten by turning it clockwise.
j Ensure that the bulb
3
is securely
and firmly seated.
j Set up the lamp on a horizontal,
even surface.
j Insert the mains plug
4
into the
socket.
j Press the ON / OFF switch
5
to
turn the table lamp on or off.
For model Z30618B
j Before using the lamp for the first
time, screw the supplied bulb
3
into the fitting of the lamp. Ensure
that the bulb
3
is securely and
firmly seated.
j Set up the lamp on a horizontal,
even surface.
j Insert the mains plug
4
into the
socket.
j Press the ON / OFF switch
5
to
turn the table lamp on or off.
For Model Z 30618 A only:
j Before using the lamp for the first
time, remove the ring of lampholder
1
by screwing it anticlockwise off
the lamp base
j Take off the lamp shade
6
.
2
, turn it
upside down and place it once
Q
Replacing a bulb
j Switch off the lamp using the
ON / OFF switch
j Pull the mains plug
5
.
4
out of the
mains socket and allow the lamp to
cool for at least 10 minutes.
7 GB/IE
Page 8
Use / Maintenance and Cleaning / Disposal
j Screw the old bulb 3 out of the
socket (see “Use”).
j Screw a bulb of the same type into
the fitting of the lamp. Ensure that the
bulb is securely and firmly seated.
Q
Maintenance and
Cleaning
CAUTION! DANGER OF ELEC-
TRIC SHOCK! For electrical safety
reasons do not clean the lamp with
water or other liquids and never
immerse it in water. Always use a
dry fluff-free cloth for cleaning the
device.
J Do not use any solvents, petrol or
similar. This would cause damage
to the light.
j Pull the mains plug
mains socket and allow the lamp to
cool for at least 10 minutes.
j Always use a dry fluff-free cloth for
cleaning the device.
4
out of the
Contact your local refuse disposal authority for more details of how to dispose
of your worn-out product.
Under no circumstances
should the device / article
and its bulbs be disposed of
with normal household rubbish.
The device / article and its bulbs should
be disposed of at an officially approved
disposal centre or at your local communal disposal facility.
Observe the applicable regulations. If
you are uncertain of what to do please
contact your local authority’s refuse
disposal department.
Product Information:
Table Lamp
Model no.: Z30618A-BS /
Z30618B-BS
Version: 01 / 2011
Q
Disposal
8 GB/IE
The packaging is made entirely
of recyclable materials, which
you may dispose of at local
recycling facilities.
EMC
Page 9
IAN 57020
Milomex Ltd.
c/o Milomex Services
Hilltop Cottage
Barton Road
Pulloxhill
Bedfordshire
MK45 5HP
UK
© by ORFGEN Marketing
Last Information Update: 11 / 2010
Ident.-No.: Z30618A/B-BS112010-6
6
Loading...