Kenwood KDC-U2163B, KDC-U463, KDC-U263A, KDC-U2363G, KDC-U2263R Manual

...

0 (0)

KDC-U463

KDC-U263B

KDC-U2363G KDC-U363 KDC-U263R

CD-RECEIVER

INSTRUCTION MANUAL

• “Made for iPod,” and “Made for iPhone” mean that an electronic accessory has been designed to connect specifically to iPod, or iPhone, respectively, and has been certified by the developer to meet Apple performance standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards. Please note that the use of this accessory with iPod or iPhone may affect wireless performance.

• iPhone, iPod, iPod classic, iPod nano, and iPod touch are trademarks of Apple Inc., registered in the U.S. and other countries.

• Lightning is a trademark of Apple Inc.

• Pandora, the Pandora logo, and the Pandora trade dress are trademarks or registered trademarks of Pandora Media, Inc., used with permission.

• Android is trademark of Google Inc.

KDC-U263A KDC-U2063

KDC-U2263R KDC-U2163B

CONTENTS BEFORE USE

BEFORE USE 2

BASICS 3

GETTING STARTED 4

RADIO 5

CD / USB / iPod / ANDROID 7

Pandora®

(for )

AUX 10

AUDIO SETTINGS 10

DISPLAY SETTINGS 11

MORE INFORMATION 12

TROUBLESHOOTING 13

INSTALLATION / CONNECTION 14

SPECIFICATIONS 18

How to read this manual

• Operations are explained mainly using buttons on the faceplate of

• [

• (

XX) indicates references are

available on the stated page.

] indicates the selected items.

Warning

Do not operate any function that takes your attention away from safe driving.

Caution

Volume setting:

• Adjust the volume so that you can hear sounds outside the car to prevent accidents.

• Lower the volume before playing digital sources to avoid damaging the speakers by the sudden increase of the output level.

General:

• Avoid using the external device if it might hinder safe driving.

• Make sure all important data has been backed up. We shall bear no responsibility for any loss of recorded data.

•

Never put or leave any metallic objects (such as coins or metal tools) inside the unit, to prevent a short circuit.

• If a disc error occurs due to condensation on the laser lens, eject the disc and wait for the moisture to evaporate.

• For

Remote control (RC-406):

• Do not leave the remote control in hot places such as on the dashboard.

• The Lithium battery is in danger of explosion if replaced incorrectly. Replace it only with the same or equivalent type.

• The battery pack or batteries shall not be exposed to excessive heat such as sunshine, fire or the like.

• Keep the battery out of reach of children and in its original packaging when not in used. Dispose of used batteries promptly. If swallowed, contact a physician immediately.

/ : USB rating is indicated on the main unit. To view, detach the faceplate.

Maintenance

Cleaning the unit: Wipe off dirt on the faceplate with a dry silicone or soft cloth. Cleaning the connector: Detach the faceplate and clean the connector

gently with a cotton swab, being careful not to damage the connector.

Handling discs:

• Do not touch the recording surface of the disc.

• Do not stick tape etc. on the disc, or use a disc with tape stuck on it.

• Do not use any accessories for the disc.

• Clean from the center of the disc and move outward.

• Clean the disc with a dry silicone or soft cloth. Do not use any solvents.

• When removing discs from this unit, pull them out horizontally.

• Remove burrs from the center hole and disc edge before inserting a disc.

( 3)

Connector (on the reverse side of the faceplate)

BASICS

Faceplate

Volume knob

(turn/press)

Detach button

Loading slot

Display window

Attach

Detach

How to reset

Remote control (RC-406)

(supplied for / / /

also be remotely controlled with an optionally purchased remote control.

Not used

/ / )

/ / can

Remote sensor (Do not expose to bright sunlight.)

Pull out the insulation sheet when using for the first time.

Your preset adjustments will also be erased.

To On the faceplate On the remote control

Turn on the power

Adjust the volume Turn the volume knob. Press

Select a source

Change the display information

Press

• Press and hold to turn off the power.

Press

• Press and hold to scroll the current display information.

repeatedly.

How to replace the battery

Press and hold SRC to turn off the power. ( Pressing SRC does not turn on the power. )

or .

Press ATT during playback to attenuate the sound.

• Press again to cancel.

Press SRC repeatedly.

( not available )

ENGLISH

GETTING STARTED

Select the display language and cancel the demonstration

When you turn on the power (or after you reset the unit), the display shows:

• For “SELLANGUAGE”

• For “CANCEL DEMO”

1 Turn the volume knob to select [

then press the knob.

[

ENG

Then, the display shows: “CANCEL DEMO” “PRESS” “VOLUME

KNOB”.

2 Press the volume knob.

[

YES

3 Press the volume knob again.

“DEMOOFF” appears.

Press the volume knob to enter [

1 2 Turn the volume knob to select [ 3 Turn the volume knob to select [

knob.

4 Turn the volume knob to make the settings, then press the knob.

Day

5 Turn the volume knob to select [

knob.

/ / / :

“PRESS” “VOLUMEKNOB”

/ / / / :

“PRESS” “VOLUME KNOB” : Proceed to step 2.

ENG

] (English) or [

] is selected for the initial setup.

Set the clock

FUNCTION

CLOCK

], then press the knob.

CLOCK ADJUST

Hour Minute

CLOCK FORMAT

], then press the

RUS

] (Russian),

6 Turn the volume knob to select [

12H

] or [

24H

], then press the knob.

7 Press and hold to exit.

To return to the previous setting item, press .

(Except for )

While in clock display screen...

Press and hold to enter clock adjustment mode directly.

Then, perform step

Set the initial settings

Press repeatedly to enter STANDBY.

1 2 Press the volume knob to enter [

For

CONTROL

4 to set the clock.

/ /

/ / :

] directly.

FUNCTION

/ / /

Pressing AUD enters [

AUDIO

3 Turn the volume knob to make a selection (see the following table),

then press the knob.

4 Repeat step 3 until the desired item is selected or activated. 5 Press and hold to exit.

To return to the previous setting item, press .

Default:

AUDIO CONTROL

SWITCH PREOUT

SP SELECT OFF/ 5/4/ 6 × 9/6/ OEM

DISPLAY

EASY MENU

REAR/ SUB-W

subwoofer are connected to the line out terminals on the rear (through an external amplifier).

4inches, 6×9inches or 6inches) or OEM speakers for optimum performance.

(For ) ON

entering [ [

COLORSELECT

REAR/ SUBWOOFER: Selects whether rear speakers or a

: Selects according to the speaker size (5inches or

:Both display and button illumination change to white color when

FUNCTION

].;

OFF

:Both display and button illumination remain as

] color. ( 11)

GETTING STARTED RADIO

TUNER SETTING

PRESET TYPE

SYSTEM

KEY BEEP

TDF ALARM

SOURCE SELECT

PANDORA SRC

BUILT-IN AUX ON

P-OFF WAIT

CD READ 1

F/W UPDATE

UPDATE SYSTEM

F/W UP xx.xx

CLOCK

CLOCK DISPLAY

ENGLISH

РУССКИЙ

NORMAL

:Memorizes one station for each preset button in each band ( 

MIX

:Memorizes one station for each preset button, regardless of the selected band.

:Activates the keypress tone.;

(For / / / / ) ON

:Activates the alarm if you forget to detach the faceplate when ACC is set to OFF.;

OFF

:Deactivates.

(For ) ON

:Enables PANDORA in source selection.;

:Enables AUX in source selection.;

(For / / / )

Applicable only when the demonstration mode is turned off. Sets the duration when the unit will automatically turns off (while in standby mode) to save the battery.

20M

:20 minutes;

:Automatically distinguishes between audio file disc and music CD.; 2:Forces to play as a

music CD. No sound can be heard if an audio file disc is played.

YES

:Starts upgrading the firmware.; NO:Cancels (upgrading is not activated).

For details on how to update the firmware, see: www.kenwood.com/cs/ce/

:The clock time is shown on the display even when the unit is turned off.;

(For

Selected language is use as the display langauge for [ (folder name, file name, song title, artist name, album name) if applicable.

40M

/ / / )

:40 minutes;

OFF

:Deactivates.

OFF

60M

OFF

:Disables. ( 9)

:Disables. ( 10)

:60 minutes;

FUNCTION

OFF–––

RADIO

).;

:Cancels

OFF

:Cancels.

] menu and Tag information

Supported band:

For / / /

For / / / /

Search for a station

Press repeatedly to select TUNER.

1 2 Press repeatedly (or press /

on RC-406) to select the band.

3 Press S/T (or press S/ on RC-406)

to search for a station.

• To change the searching method for S/T: Press

AUTO1 : Automatically search for a station. AUTO2 : Search for a preset station. MANUAL : Manually search for a station.

• To store a station: Press and hold one of the number buttons (1to6).

• To select a stored station: Press one of the number buttons (1to6) (or press one of the number buttons (1to6) on RC-406).

FM1/ FM2/ FM3/ MW/ LW

FM1/ FM2/ FM3/ AM/ SW1/ SW2

repeatedly.

ENGLISH

RADIO

Direct Access Tuning (using RC-406)

Press DIRECT to enter Direct Access Tuning.

“– – – • –” (for FM), “– – – –” (for MW/ LW/ AM/ SW1) or “– – – – –”

(for SW2) appears on the display.

2 Press the number buttons to enter a frequency. 3 Press to search for a station.

• To cancel, press or DIRECT.

• If no operation is done for 10seconds after step Tuning is automatically canceled.

2, Direct Access

Other settings

Press the volume knob to enter [

FUNCTION

2 Turn the volume knob to make a selection (see the following

table), then press the knob.

3 Repeat step 2 until the desired item is selected or activated. 4 Press and hold to exit.

To return to the previous setting item, press .

Default:

TUNER SETTING

LOCAL SEEK

AUTO MEMORY

MONO SET ON

:Searches only stations with good reception.;

For / / /

•

Settings made are applicable only to the selected source/station.

Once you change the source/station, you need to make the settings again.

YES

:Automatically starts memorizing 6 stations with good

reception.;

•

Selectable only if [

:Improves the FM reception, but the stereo effect may be lost.;

OFF

:Cancels.

FM stations only

/ :

:Cancels.

NORMAL

AM/ SW1/ SW2 stations only

] is selected for [

OFF

:Cancels.

PRESET TYPE

]. ( 5)

NEWS SET ON

REGIONAL*1ON

AF SET*

TI*

PTY SEARCH

CLOCK

TIME SYNC

Default:

For / / / : ON

For

Only for FM source.

• [

MONO SET

when the band is FM1/ FM2/ FM3.

• Available Program Type:

SPEECH

MUSIC: POP M (music), ROCK M (music), EASY M (music), LIGHT M (music), CLASSICS

The unit will search for the Program Type categorized under [

[

MUSIC

• If the volume is adjusted during reception of traffic information, alarm or news bulletin, the adjusted volume is memorized automatically. It will be applied the next time traffic information, alarm or news bulletin is turned on.

:The unit will temporarily switch to News Programme if available.;

: Switches to another station only in the specific region using the “AF” control.;

OFF

:Cancels.

: Automatically searches for another station broadcasting the same program in the same Radio Data System network with better reception when the current reception is poor.;

: Allows the unit to temporarily switch to Traffic Information if available (“TI” lights up).;

Press the volume knob to enter PTY language selection. Turn the volume knob to select the PTY language ( Selects the available Program Type (see below), then, press

:Synchronizes the unit’s time to the Radio Data System station time.;

OFF

:Cancels.

/ / / / : OFF

]/ [

NEWS SET

: NEWS

, AFFAIRS

SCIENCE

, VARIED

TRAVEL

, LEISURE

OTHER M (music), JAZZ

] if selected.

OFF

:Cancels.

OFF

:Cancels.

ENGLISH/ FRENCH/ GERMAN

]/ [

REGIONAL

]/ [

AF SET

]/ [TI]/ [

, INFO (information), SPORT

, WEATHER

, FINANCE

, DOCUMENT

, COUNTRY

, CHILDREN

, NATION M (music), OLDIES

PTY SEARCH

, EDUCATE

, SOCIAL

), then press the knob.

, DRAMA

, RELIGION

OFF

:Cancels.

/T to start.

] is selectable only

, CULTURE

, PHONE IN

, FOLK M (music)

SPEECH

] or

CD / USB / iPod / ANDROID

Start playback

The source changes automatically and playback starts.

Eject disc

USB input terminal

USB

CA-U1EX (max.: 500mA) (optional accessory)

iPod/iPhone

KCA-iP102 / KCA-iP103 (optional accessory) of the iPod/iPhone

ANDROID

Micro USB 2.0 cable (commercially available)

KCA-iP102 : 30-pin type, KCA-iP103 : Lightning type

Do not leave the cable inside the car when not using.

Label side

(for

/ )

or accessory cable

To On the faceplate On the remote control

Playback / pause Press .

Reverse / Fast-forward

Select a track/file

Select a folder

Repeat play

Press and hold S/T. Press and hold S/ .

Press S/T. Press S/

Press J/K.

Press repeatedly.

TRACK REPEAT/ REPEAT OFF FILE REPEAT/ FOLDER REPEAT/ REPEAT OFF

: Audio CD

Press

/ .

: MP3/WMA/WAV file, iPod or

ANDROID

Random play

FILE REPEAT/ REPEAT OFF

Press or repeatedly.

DISC RANDOM/ RANDOM OFF FOLDER RANDOM/ RANDOM OFF

: KME Light/ KMC file

: Audio CD

: MP3/WMA/WAV file, KME Light/ KMC

file, iPod or ANDROID

Press and hold

Select control mode While in iPod source, press repeatedly.

MODE ON

: Control from the iPod

MODE OFF

: Control from the unit

While in ANDROID source,

Select music drive (

8, [

MUSIC DRIVE]

)

Press

The stored songs in the following start playback.

or to select

or 5 repeatedly.

( 8, [

ANDROID SETUP])

ALL RANDOM

• Selected internal or external memory of a smartphone (Mass Storage Class).

• Selected drive of a multiple drives device.

ENGLISH

CD / USB / iPod / ANDROID

When connecting an Android device, “Press [VIEW] to install KENWOOD MUSIC PLAY APP” is shown. Follow the instructions to install the application. You can also install the latest version of KENWOOD MUSIC PLAY application on your Android device before connecting. (

For ANDROID: Applicable only when [

For CD: Only for MP3/WMA files. This does not work for iPod/ ANDROID.

For iPod/ ANDROID: Applicable only when [

KME Light : KENWOOD Music Editor Light, KMC : KENWOOD Music Control ( 12)

For CD: Only for MP3/WMA files.

You can still play/pause, file skip, fast-forward or reverse files from the unit.

BROWSE MODE

MODE OFF

] is selected. ( [

]/ [

BROWSE MODE

ANDROID SETUP

Select a file from a folder/list

Press .

1 2 Turn the volume knob to select a folder/list, then press the knob. 3 Turn the volume knob to select a file, then press the knob.

Quick Search

If you have many files, you can search through them quickly.

For USB (for KME Light/ KMC files):

Press S/T to search at a preset skip search ratio. ( Press and hold S/T to search at a 10

ratio.

• Not applicable for CD and MP3/WMA/WAV files. For iPod:

You can search for a file according to the first character.

Turn the volume knob quickly to enter character search. Turn the volume knob to select the character.

To search for a character other than A to Z and 0to9, enter only “ * ”.

Press S/T to move to the entry position.

• You can enter up to 3characters.

Press the volume knob to start searching.

• To return to the root folder/ first file/ top menu, press 5.

• To return to the previous setting item, press

• To cancel, press and hold

• For iPod, applicable only when [

• For ANDROID, applicable only when [ (

[

ANDROID SETUP

])

MODE OFF

BROWSE MODE

] is selected. ( 7)

] is selected.

[

SKIP SEARCH

12)

Direct Music Search (using RC-406)

Press DIRECT.

1 2 Press the number buttons to enter a track/file number.

])

3 Press to search for music.

• To cancel, press or DIRECT.

• Not available if Random Play is selected.

• Not applicable for iPod, ANDROID, KME Light/ KMC file.

Listen to TuneIn Radio/ TuneIn Radio Pro/ Aupeo

While listening to TuneIn Radio, TuneIn Radio Pro or Aupeo, connect the iPod/iPhone to the USB input terminal of the unit.

• The unit will output the sound from these applications.

Other settings

Press the volume knob to enter [

FUNCTION

2 Turn the volume knob to make a selection (see the following

])

table), then press the knob.

3 Repeat step 2 until the desired item is selected or activated. 4 Press and hold to exit.

To return to the previous setting item, press .

ANDROID SETUP

BROWSE MODE HAND MODE

: Control from the unit (using KENWOOD MUSIC PLAY application).;

:Control other media player applications from the Android device (without using KENWOOD MUSIC PLAY application). However, you can still play/pause and file skip from the unit.

USB

MUSIC DRIVE DRIVE CHANGE

:The next drive ([

DRIVE 1

automatically and playback starts. Repeat steps

SKIP SEARCH 0.5%/ 1%/ 5%/ 10%

to 3 to select the following drives.

: While listening to iPod, ANDROID or KME

Light/ KMC file, selects the skip search ratio over the total files.

] to [

DRIVE 5

Default:

]) is selected

Pandora®

Preparation:

Install the latest version of the Pandora application on your device (iPhone/ iPod touch), then create an account and log in to Pandora.

• Select [

] for [

(for )

PANDORA SRC

]. ( 5)

Start listening

Open the Pandora application on your device.

1 2 Connect your device to the USB input terminal.

Create and save a new station

Press and hold the volume knob.

1 2 Turn the volume knob to select [

press the knob.

A new station is created based on the current song or artist.

FROM TRACK

] or [

FROM ARTIST

], then

3 Press and hold one of the number buttons (1to5) to store.

To select a stored station, press one of the number buttons (1to5).

USB input terminal

KCA-iP102 / KCA-iP103 (optional

The source changes to PANDORA and broadcast starts.

To On the faceplate On the remote control

Playback / pause

Skip a track

Thumbs up or thumbs

down

KCA-iP102 : 30-pin type, KCA-iP103 : Lightning type

Do not leave the cable inside the car when not using.

If thumbs down is selected, the current track is skipped.

accessory) the iPod/iPhone

or accessory cable of

Press

Press T.

Press / .

. Press

Press

/ .

Search for a registered station

Press .

1 2 Turn the volume knob to make a selection, then press the knob.

[

BY DATE

[

]:According to the registered date

A-Z

]:Alphabetical order

3 Turn the volume knob to the desired station, then press the knob.

To cancel, press and hold .

(or using RC-406)

Press J / K to search for a station, then press .

Bookmark a song or artist information

Press and hold J.

1 2 Turn the volume knob to make a selection, then press the knob.

[

THIS TRACK

[

THIS ARTIST

“BOOKMARKED” appears and the information is stored to your device.

The bookmark is available on your Pandora account but not on this unit.

]:Current song information

]:Current artist information

ENGLISH

AUX

Preparation:

Select [

] for [

BUILT-IN AUX

Start listening

Connect a portable audio player (commercially

available).

Auxiliary input jack

3.5mm stereo mini plug with “L” shaped connector (commercially available)

2 Press repeatedly to select AUX. 3 Turn on the portable audio player and start

playback.

Set the AUX name

While listening to a portable audio player connected to the unit...

1 Press the volume knob to enter [ 2 Turn the volume knob to select [

press the knob.

3 Turn the volume knob to select [

then press the knob.

4 Turn the volume knob to make a selection, then

press the knob.

AUX

(default)/

5 Press and hold to exit.

To return to the previous setting item, press .

]. ( 5)

Portable audio player

FUNCTION SYSTEM

], then

AUX NAME SET

DVD/ PORTABLE/ GAME/ VIDEO/ TV

AUDIO SETTINGS

While listening to any source...

1 Press the volume knob to enter [ 2 Turn the volume knob to select [

For

/ /

3 Turn the volume knob to make a selection (see the following table), then press the

knob.

4 Repeat step 3 until the desired item is selected or activated. 5 Press and hold to exit.

(or using RC-406)

1 Press AUD to enter [

AUDIO CONTROL

2 Press J / K to make a selection, then press .

To return to the previous setting item, press

SUB-W LEVEL –15

BASS LEVEL –8

MID LEVEL –8

TRE LEVEL –8

EQ PRO

BASS ADJUST

MID ADJUST

+15 (0

) Adjusts the subwoofer output level.

to +8 (+6)

to +8 (+5)

to +8 (0)

BASS CTR FRQ

BASS LEVEL –8

BASS Q FACTOR 1.00/ 1.25/ 1.50/ 2.00

BASS EXTEND ON

MID CTR FRQ

MID LEVEL –8

MID Q FACTOR 0.75/ 1.00/ 1.25

FUNCTION

AUDIO CONTROL

Pressing AUD enters [

Adjusts the level to memorize for each source. (Before making an adjustment, select the source you want to adjust.)

60/ 80/ 100/ 200

frequency.

to +8 (+6):Adjusts the level.

:Turns on the extended bass.;

0.5K/ 1.0K/ 1.5K/ 2.5K

center frequency.

to +8 (+5):Adjusts the level.

], then press the knob.

/ / / /

:Adjusts the quality factor.

AUDIO CONTROL

60HZ/ 80HZ/ 100HZ/ 200HZ

:Adjusts the quality factor.

OFF

:Cancels.

0.5KHZ/ 1.0KHZ/ 1.5KHZ/ 2.5KHZ

] directly.

Default:

:Selects the center

:Selects the

AUDIO SETTINGS

TRE ADJUST TRE CTR FRQ 10.0K/ 12.5K/ 15.0K/ 17.5K

TRE LEVEL –8

PRESET EQ DRIVE EQ/ TOP40/ POWERFUL/ ROCK/ POPS/ EASY/ JAZZ/ NATURAL

BASS BOOST LV1/ LV2/ LV3

LOUDNESS LV1/ LV2

SUBWOOFER SET ON

LPF SUBWOOFER THROUGH

SUB-W PHASE REVERSE

FADER R15

BALANCE L15

VOLUME OFFSET

SOUND RECNSTR

(Sound reconstruction)

• [

SUB-W LEVEL

if [

SWITCH PREOUT

• [

SUB-W LEVEL

[

SUBWOOFER SET

USER

the customized settings.) [

DRIVE EQ] is a preset equalizer that reduces noise outside the car or running

noise of the tyres.

level.;

boost to produce a well-balanced sound at a low volume level.;

:Turns on the subwoofer output.;

signals with frequencies lower than 85Hz/ 120Hz/ 160Hz are sent to the subwoofer.

in line with the speaker output for optimum performance. (Selectable only if a setting other than [

For AUX: level of each source. (Before adjustment, select the source you want to adjust.)

:Creates realistic sound by compensating the high-frequency components and

restoring the rise-time of the waveform that are lost in audio data compression.;

OFF

:Cancels.

]/ [

SUBWOOFER SET

] is set to [

]/ [

LPF SUBWOOFER

] is set to [ON].

15.0KHZ/ 17.5KHZ

to +8 (0):Adjusts the level.

:Selects a preset equalizer suitable to the music genre. (Select [

LEVEL1/ LEVEL2/ LEVEL3

OFF

:Cancels.

LEVEL1/ LEVEL2

:All signals are sent to the subwoofer.;

(180°)/

F15 (0

):Adjusts the rear and front speaker output balance.

R15 (0

):Adjusts the left and right speaker output balance.

–8

to +8(0) ; For other sources: –8 to 0:Presets the volume adjustment

]/ [

SUB-W

]/ [

:Selects your preferred low and high frequencies

NORMAL

(0°):Selects the phase of the subwoofer output to be

THROUGH

] is selected for [

LPF SUBWOOFER

] or [

SUBWOOFER

SUB-W PHASE

:Selects the center frequency.

OFF

] is selectable only if

10.0KHZ/ 12.5KHZ

:Selects your preferred bass boost

:Cancels.

85HZ/ 120HZ/ 160HZ

LPF SUBWOOFER

]/ [

SUB-W PHASE

]. ( 4)

] is selectable only

OFF

].)

USER

:Cancels.

:Audio

DISPLAY SETTINGS

1 Press the volume knob to enter [ 2 Turn the volume knob to select [

knob.

3 Turn the volume knob to make a selection (see the following

table), then press the knob.

4 Repeat step 3 until the desired item is selected/activated or

] to use

follow the instructions stated on the selected item.

5 Press and hold to exit.

To return to the previous setting item, press .

COLOR SELECT

DIMMER ON

BRIGHTNESS 0

TEXT SCROLL AUTO/ ONCE

For .

Preset colors:

BLUE1 AQUA2 YELLOW

VARIABLE SCAN/ CUSTOM R/G/B/

preferred key and display illumination color.

You can create your own color (when [

colors*

is selected). The color you have created can be stored in

[

CUSTOM R/G/B

Press and hold the volume knob to enter the detailed color

adjustment.

Press S/T to select the color (R/ G/ B) to adjust.

Turn the volume knob to adjust the level (0 — 9), then press

the knob.

:Dims the display illumination (and button illumination*1).;

OFF

:Cancels.

— 31: Selects your preferred brightness level for display

illumination (and button illumination*

automatically, or scroll only once.;

RED1/ RED2/ RED3/ PURPLE1/ PURPLE2/ PURPLE3/ PURPLE4/

BLUE2/ BLUE3/ SKYBLUE1/ SKYBLUE2/ LIGHTBLUE/ AQUA1/

GREEN1/ GREEN2/ GREEN3/ YELLOWGREEN1/ YELLOWGREEN2/

ORANGE1/ ORANGE2/ ORANGERED

:Selects whether to scroll the display information

FUNCTION

DISPLAY

], then press the

preset colors*2: Selects your

CUSTOM R/G/B

OFF

:Cancels.

Default:

] or preset

ENGLISH

MORE INFORMATION

General

•

This unit can only play the following CDs:

•

Detailed information and notes about the playable audio files are stated in an online manual

on the following web site: www.kenwood.com/cs/ce/audiofile/

Playable files

•

Playable audio file: MP3 (.mp3), WMA (.wma)

•

Playable disc media: CD-R/CD-RW/CD-ROM

•

Playable disc file format: ISO 9660 Level 1/2, Joliet, Long file name.

•

Playable USB device file system: FAT12, FAT16, FAT32 Even when audio files comply with the standards listed above, playback may be impossible depending on the types or conditions of media or device.

Unplayable discs

•

Discs that are not round.

•

Discs with coloring on the recording surface or discs that are dirty.

•

Recordable/ReWritable discs that have not been finalized.

•

8cm CD. Attempting to insert using an adapter may cause malfunction.

About USB devices

•

This unit can play MP3/WMA/WAV files stored on a USB mass storage class device.

•

You cannot connect a USB device via a USB hub.

•

Connecting a cable whose total length is longer than 5m may result in abnormal playback.

•

This unit cannot recognize a USB device whose rating is other than 5V and exceeds 1A.

About KENWOOD Music Editor Light and KENWOOD Music Control

•

This unit supports the PC application KENWOOD Music Editor Light and Android™ application

KENWOOD Music Control.

•

When you play audio files with song data added using the KENWOOD Music Editor Light or

KENWOOD Music Control, you can search for audio files by Genres, Artists, Albums, Playlists, and Songs.

•

KENWOOD Music Editor Light and KENWOOD Music Control are available on the following

web site: www.kenwood.com/cs/ce/

About iPod/iPhone

Made for

iPod touch (2nd, 3rd, 4th, and 5th generation)

iPod classic

iPod nano (3rd, 4th, 5th, 6th, and 7th generation)

iPhone 3G, 3GS, 4, 4S, 5, 5S, 5C

•

For the latest compatible list and software versions of iPhone/iPod, see:

www.kenwood.com/cs/ce/ipod

•

You cannot operate iPod if “KENWOOD” or “ ” is displayed on iPod.

About Android device

•

This unit supports Android OS 4.1 and above.

•

Some Android devices (with OS 4.1 and above) may not fully support Android Open Accessory

(AOA) 2.0.

•

If the Android device supports both mass storage class device and AOA 2.0, this unit always

playback via AOA 2.0 as priority.

•

For more information and the latest compatible list, see: www.kenwood.com/cs/ce/

About Pandora

•

Pandora is available only in the U.S., Australia and New Zealand.

•

Because Pandora is a third-party service, the specifications are subject to change without

prior notice. Accordingly, compatibility may be impaired, or some or all of the services may become unavailable.

•

Some functions of Pandora cannot be operated from this unit.

•

For issues using the application, please contact Pandora at pandora-support@pandora.com.

Muting upon the reception of a phone call

Connect the MUTE wire to your telephone using a commercial telephone accessory. (

When a call comes in, “CALL” appears. (The audio system pauses.)

• To continue listening to the audio system during a call, press “CALL” disappears and the audio system resumes.

When the call ends, “CALL” disappears. (The audio system resumes.)



16, 17

)

+ 26 hidden pages