Kenwood KDC-MPV5025 User Manual

0 (0)

KDC-X579

KDC-MPV525

KDC-MPV5025

KDC-MP425

CD-RECEIVER

INSTRUCTION MANUAL

AMPLI-TUNER-LECTEUR DE CD

MODE D’EMPLOI

REPRODUCTOR DE DISCOS COMPACTOS RECEPTOR DE FM/AM

MANUAL DE INSTRUCCIONES

Take the time to read through this instruction manual.

Familiarity with installation and operation procedures will help

you obtain the best performance from your new CD-receiver.

For your records

Record the serial number, found on the back of the unit, in the spaces

designated on the warranty card, and in the space provided below.

Refer to the model and serial numbers whenever you call upon your

KENWOOD dealer for information or service on the product.

Model KDC-X579, KDC-MPV525, KDC-MPV5025, KDC-MP425

Serial number

English

Warning 3

Safety precautions 4

Notes 6

About CDs 7

Notes on playing MP3/WMA 8

General features 10

Power

Selecting the Source

Volume

System Q

Audio Control

Speaker Setting

Switching Display

Station/Disc Naming (SNPS/DNPS)

Auxiliary Input Display Setting

Subwoofer Output

Theft Deterrent Faceplate

TEL Mute

Tuner features 15

Tuning Mode

Tuning

Direct Access Tuning

Station Preset Memory

Auto Memory Entry

Preset Tuning

CD/MP3/WMA/External disc control

features 17

Playing External Disc

Playing CD & MP3/WMA

Fast Forwarding and Reversing

Track/File Search

Disc Search/Folder Search

Direct Track/File Search

Direct Disc Search

Track/File/Disc/Folder Repeat

Scan Play

Random Play

Magazine Random Play

Folder Select

Tex t/Title Scroll

DNPP (Disc Name Preset Play)

HD Radio control features 21

Tuning

Auto Memory Entry

Menu system 23

Menu System

Security Code

Touch Sensor Tone

Manual Clock Adjustment

DSI (Disabled System Indicator)

Selectable Illumination

Switching Display Type

Illumination Color Setting

Contrast Adjustment

Dimmer

System Q Setting

Switching preout

Built-in Amp Mute Setting

SIRIUS ID (ESN) display

Dual Zone System

Dual Zone System Setting

B.M.S. (Bass Management System)

B.M.S. Frequency Offset

CRSC (Clean Reception System Circuit)

Tex t Scroll

CD Read Setting

AMP Control

Receive mode Setting

Tuning Mode

Auto Memory Entry

Basic Operations of remote 29

Accessories/ Installation Procedure

Connecting Wires to Terminals 32

Installation 33

Removing the Unit 35

Troubleshooting Guide 36

Specifications 39

English

2Warning

2CAUTION

Use of controls or adjustments or performance of

procedures other than those specified herein may

result in hazardous radiation exposure.

In compliance with Federal Regulations, following

are reproductions of labels on, or inside the product

relating to laser product safety.

KENWOOD CORPORATION

2967-3, ISHIKAWA-CHO,

HACHIOJI-SHI

TOKYO, JAPAN

KENWOOD CORP. CERTIFIES THIS EQUIPMENT

CONFORMS TO DHHS REGULATIONS N0.21 CFR

1040. 10, CHAPTER 1, SUBCHAPTER J.

Location : Bottom Panel

FCC WARNING

This equipment may generate or use radio

frequency energy. Changes or modifications to

this equipment may cause harmful interference

unless the modifications are expressly approved

in the instruction manual. The user could lose

the authority to operate this equipment if an

unauthorized change or modification is made.

NOTE

This equipment has been tested and found to

comply with the limits for a Class B digital device,

pursuant to Part 15 of the FCC Rules. These limits

are designed to provide reasonable protection

against harmful interference in a residential

installation. This equipment may cause harmful

interference to radio communications, if it is

not installed and used in accordance with the

instructions. However, there is no guarantee

that interference will not occur in a particular

installation. If this equipment does cause harmful

interference to radio or television reception, which

can be determined by turning the equipment off

and on, the user is encouraged to try to correct

the interference by one or more of the following

measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment

and receiver.

• Connect the equipment into an outlet on a

circuit different from that to which the receiver is

connected.

• Consult the dealer or an experienced radio/TV

technician for help.

English

Safety precautions

2CAUTION

To prevent damage to the machine, take

the following precautions:

• Make sure to ground the unit to a negative 12V

DC power supply.

• Do not open the top or bottom covers of the unit.

• Do not install the unit in a spot exposed to direct

sunlight or excessive heat or humidity. Also avoid

places with too much dust or the possibility of

water splashing.

• Do not set the removed faceplate or the faceplate

case in areas exposed to direct sunlight, excessive

heat or humidity. Also avoid places with too much

dust or the possibility of water splashing.

• To prevent deterioration, do not touch the

terminals of the unit or faceplate with your

fingers.

• Do not subject the faceplate to excessive shock,

as it is a piece of precision equipment.

• When replacing a fuse, only use a new one with

the prescribed rating. Using a fuse with the wrong

rating may cause your unit to malfunction.

• To prevent a short circuit when replacing a fuse,

first disconnect the wiring harness.

• Do not place any object between the faceplate

and the unit.

• Do not apply excessive force to the open

faceplate or place objects on it. Doing so will

cause damage or breakdown.

• Do not use your own screws. Use only the screws

provided. If you use the wrong screws, you could

damage the unit.

2WARNING

To prevent injury or fire, take the

following precautions:

• Insert the unit all the way in until it is fully locked

in place. Otherwise it may fall out of place when

jolted.

• When extending the ignition, battery, or ground

wires, make sure to use automotive-grade wires

or other wires with a 0.75mm² (AWG18) or more

to prevent wire deterioration and damage to the

wire coating.

• To prevent a short circuit, never put or leave any

metallic objects (such as coins or metal tools)

inside the unit.

• If the unit starts to emit smoke or strange smells,

turn off the power immediately and consult your

Kenwood dealer.

• Make sure not to get your fingers caught between

the faceplate and the unit.

• Be careful not to drop the unit or subject it to

strong shock.

The unit may break or crack because it contains

glass parts.

• Do not touch the liquid crystal fluid if the LCD

is damaged or broken due to shock. The liquid

crystal fluid may be dangerous to your health or

even fatal.

If the liquid crystal fluid from the LCD contacts

your body or clothing, wash it off with soap

immediately.

English

About CD players/disc changers

connected to this unit

KENWOOD disc changers/ CD players released in

1998 or later can be connected to this unit.

Refer to the catalog or consult your Kenwood

dealer for connectable models of disc changers/

CD players.

Note that any KENWOOD disc changers/ CD players

released in 1997 or earlier and disc changers made

by other makers cannot be connected to this unit.

Unsupported connection may result in damage.

Setting the "O-N" Switch to the "N" position for the

applicable KENWOOD disc changers/ CD players.

The functions that can be used and the information

that can be displayed will differ depending on the

models being connected.

• You can damage both your unit and the CD changer if

you connect them incorrectly.

Do Not Load 3-in. CDs in the CD slot

If you try to load a 3 in. CD with its adapter into the

unit, the adapter might separate from the CD and

damage the unit.

NOTE

• If you experience problems during installation,

consult your Kenwood dealer.

• If the unit fails to operate properly, press the Reset

button. The unit returns to factory settings when

the Reset button is pressed. If the unit still fails to

operate properly after the Reset button has been

pressed, contact your local KENWOOD dealer for

assistance.

• Press the reset button if the disc auto changer fails

to operate correctly. Normal operation should be

restored.

• Characters in the LCD may become difficult to

read in temperatures below 41 ˚F (5 ˚C).

• The illustrations of the display and the panel

appearing in this manual are examples used to

explain more clearly how the controls are used.

Therefore, what appears on the display in the

illustrations may differ from what appears on

the display on the actual equipment, and some

of the illustrations on the display may represent

something impossible in actual operation.

Lens Fogging

Right after you turn on the car heater in cold

weather, dew or condensation may form on

the lens in the CD player of the unit. Called lens

fogging, CDs may be impossible to play. In such

a situation, remove the disc and wait for the

condensation to evaporate. If the unit still does

not operate normally after a while, consult your

Kenwood dealer.

SRC

Reset button

English

Notes

Cleaning the Unit

If the faceplate of this unit is stained, wipe it with a

dry soft cloth such as a silicon cloth.

If the faceplate is stained badly, wipe the stain off

with a cloth moistened with neutral cleaner, then

wipe neutral detergent off.

• Applying spray cleaner directly to the unit may affect its

mechanical parts. Wiping the faceplate with a hard cloth

or using a volatile liquid such as thinner or alcohol may

scratch the surface or erases characters.

Cleaning the Faceplate Terminals

If the terminals on the unit or faceplate get dirty,

wipe them with a dry, soft cloth.

Cleaning the CD Slot

As dust tends to accumulate in the CD slot, clean it

every once in a while. Your CDs can get scratched if

you put them in a dusty CD slot.

NOTE

This Class B digital apparatus complies with

Canadian ICES-003.

About SIRIUS Satellite radio tuner

Refer to the instruction manual of SIRIUS Satellite

radio tuner KTC-SR901/SR902 (optional accessory),

when connected, for the operation method.

• Refer to the sections of A models for operations.

SCAN

AUD

RDM REP F.SEL M.RDM

SRC

AUTO

1–6

SRC 38

English

Handling CDs

• Don’t touch the recording surface of the CD.

• CD-R and CD-RW are easier to damage than a

normal music CD. Use a CD-R or a CD-RW after

reading the caution items on the package etc.

• Don’t stick tape etc. on the CD.

Also, don’t use a CD with tape stuck on it.

When using a new CD

If the CD center hole or outside rim has burrs, use it

after removing them with a ball pen etc.

CD accessories

Don’t use disc type accessories.

CD cleaning

Clean from the center of the disc and move

outward.

About CDs

Burrs

Removing CDs

When removing CDs from this unit pull them out

horizontally.

CDs that can’t be used

• CDs that aren’t round can’t be used.

• CDs with coloring on the recording surface or that

are dirty can’t be used.

• This unit can only play the CDs with

It may not correctly play discs which do not have

the mark.

• A CD-R or CD-RW that hasn’t been finalized can’t

be played. (For the finalization process refer to

your CD-R/CD-RW writing software, and your CD-

R/CD-RW recorder instruction manual.)

CD storage

• Don’t place them in direct sunlight (On the seat

or dashboard etc.) and where the temperature is

high.

• Store CDs in their cases.

English

Notes on playing MP3/WMA

Note, however, that the MP3/WMA recording

media and formats acceptable are limited. When

writing MP3/WMA, pay attention to the following

restrictions.

Acceptable media

The MP3/WMA recording media acceptable to this

unit are CD-ROM, CD-R, and CD-RW.

When using CD-RW, do full format not quick format

to prevent malfunction.

Acceptable medium formats

The following formats are available for the media

used in this unit. The maximum number of

characters used for file and folder name including

the delimiter (".") and three-character extension are

indicated in parentheses.

• ISO 9660 Level 1 (12 characters)

• ISO 9660 Level 2 (31 characters)

• Joliet (64 character;Up to 32 characters are

displayed)

• Romeo (128 character; Up to 64 characters are

displayed)

• Long file name (200 characters; Up to 64

characters are displayed)

• Maximum number of characters for folder name:

64 (Joliet; Up to 32 characters are displayed

)

For a list of available characters, see the instruction

manual of the writing software and the section

Entering file and folder names below.

The media reproducible on this unit has the

following limitations:

• Maximum number of directory levels: 8

• Maximum number of files per folder: 255

• Maximum number of folders: 50

MP3/WMA written in the formats other than the

above may not be successfully played and their file

names or folder names are not properly displayed.

Settings for your MP3/WMA encoder and

CD writer

Do the following setting when compressing

audio data in MP3/WMA data with the MP3/WMA

encoder.

• Transfer bit rate: MP3: 8 —320 kbps

WMA: 48 —192 kbps

• Sampling frequency

MP3: 8, 11.025, 12, 16, 22.05, 24, 32, 44.1, 48 kHz

WMA: 32, 44.1, 48 kHz

When you use your CD writer to record MP3/WMA

up to the maximum disc capacity, disable additional

writing. For recording on an empty disc up to the

maximum capacity at once, check Disc at Once.

• Play mode may not be possible when portions of the

functions of Windows Media Player 9 or higher are used.

Entering ID3 tag

The Displayable ID3 tag is ID3 version 1.x.

For the character code, refer to the List of Codes.

Entering file and folder names

The code list characters are the only file names and

folder names that can be entered and displayed.

If you use any other character for entry, the file and

folder names are not displayed correctly. They may

neither be displayed correctly depending on the CD

writer used.

The unit recognizes and plays only those MP3/WMA

which have the MP3/WMA extension (.MP3/.WMA).

• A file with a name entered with characters not on the

code list may not play correctly.

Writing files into a medium

When a medium containing MP3/WMA data is

loaded, the unit checks all the data on the medium.

If the medium contains a lot of folders or non-MP3/

WMA files, therefore, it takes a long time until the

unit starts playing MP3/WMA.

In addition, it may take time for the unit to move

to the next MP3/WMA file or a File Search or Folder

Search may not be performed smoothly.

Loading such a medium may produce loud noise to

damage the speakers.

• Do no attempt to play a medium containing a non-MP3/

WMA file with the MP3/WMA extension.

The unit mistakes non-MP3/WMA files for MP3/WMA data

as long as they have the MP3/WMA extension.

• Do not attempt to play a medium containing non MP3/

WMA.

English

MP3/WMA playing order

When selected for play, Folder Search, File Search,

or for Folder Select, files and folders are accessed

in the order in which they were written by the CD

writer.

Because of this, the order in which they are

expected to be played may not match the order in

which they are actually played. You may be able to

set the order in which MP3/WMA are to be played

by writing them onto a medium such as a CD-R

with their file names beginning with play sequence

numbers such as "01" to "99", depending on your

CD writer.

For example, a medium with the following folder/

file hierarchy is subject to Folder Search, File Search,

or Folder Select as shown below.

Example of a medium’s folder/file hierarchy

Folder

Level 2 Level 4

Level 1 Level 3 Level 5

File

Root

When a File Search is executed with file ¡$

being played ...

Operation of

the button

(Current file:

¡$)

4 Button

Beginning of file

¡$ ➜ ¡#

¢ Button

¡% ➜ ¡&

When a Folder Search is executed with file ¡$

being played ...

Operation of

the button

(Current folder:

AM Button

3 ➜ 2 ➜ 1 ➜ 8 ...

FM Button

5 ➜ 6 ➜ 7 ➜ 8 ➜ 1 ...

When Folder Select is selected with file ¡$

being played to move from folder to folder ...

Operation of

the button

(Current folder:

4 Button

¢ Button

AM Button

FM Button

English

General features

Power

Turning ON the Power

Press the [SRC] button.

Turning OFF the Power

Press the [SRC] button for at least 1 second.

Selecting the Source

Press the [SRC] button.

Source required Display

SIRIUS tuner (Optional accessory) "SIRIUS"

Tuner or HD Radio (Optional accessor y) "TUNER" or "HD Radio"

CD "CD"

External disc (Optional accessory) "CD CH"/"CD2"

Auxiliary input (Optional accessory) "AUX EXT"

Standby (Illumination only mode) "STANDBY"

Volume

Increasing Volume

Turn the [VOL] knob clockwise.

Decreasing Volume

Turn the [VOL] knob counterclockwise.

System Q

You can recall the best sound setting preset for

different types of music.

1 Select the source to set

Press the [SRC] button.

2 Select the Sound type

Press the [Q] button.

Each time the button is pressed the sound

setting switches.

Sound setting Display

Flat "Flat"

User memory "User"

SCAN

AUD

RDM REP F.SEL M.RDM

SRC

DISP/

NAME.S

AUD

VOL

SRC

FM AM/

Release button

English

Rock "Rock"

Pops "Pops"

Easy "Easy"

Top 40 "Top40"

Jazz "Jazz"

• User memory: The values set on the 'Audio Control'

(page 11).

• Each setting value is changed with the 'Speaker

Setting' (page 11).

First, select the speaker type with the Speaker setting.

Audio Control

1 Select the source for adjustment

Press the [SRC] button.

2 Enter Audio Control mode

Press the [AUD] button for at least 1 second.

3 Select the Audio item for adjustment

Press the [FM] or [AM] button.

Each time the button is pressed the items that

can be adjusted switch as shown below.

4 Adjust the Audio item

Press the [4] or [¢] button.

Adjustment Item Display Range

Bass Center Frequency*² "Bass F" 60/70/80/100 or 150 Hz

Bass level "Bass" –8 — +8

Bass Q Factor*² "Bass Q" 1.00/1.25/1.50/2.00

Bass Extend*² "Bass EXT" ON/OFF

Middle Center Frequency*² "MID F" 0.5/1.0/1.5/2.0 kHz

Middle level "Middle" –8 — +8

Middle Q Factor*² "Middle Q" 1.0/2.0

Treble Center Frequency*² "TRE F" 10.0/12.5/15.0/17.5 kHz

Treble level "Treble" –8 — +8

Balance "Balance" Left 15 — Right 15

Fader "Fader" Rear 15 — Front 15

Sub woofer level*¹ "SW Level" –15 — +15

Front High Pass Filter*² "HPF F" Through/100/125/

170 Hz

Rear High Pass Filter*² "HPF R" THRU/200 Hz

Front/Rear High Pass Filter "HPF" THRU/100/125/170 Hz

Sub woofer Low Pass

Filter*¹

"LPF SW" 50/80/120/THRU Hz

Volume offset "V-offset" –8 — ±0

Loudness "LOUD" ON/OFF

• According to the Bass Q Factor setting value, the

frequencies that can be set in Bass Center Frequency

change as shown below.

Bass Q Factor Bass Center Frequency

1.00/1.25/1.50 60/70/80/100

2.00 60/70/80/150

• When the Bass Extend is set to ON, low frequency

response is extended by 20%.

• Volume offset: Each source’s volume can be set as a

difference from the basic volume.

• Loudness: Compensating for low and high tones

during low volume.

• *¹ You can control this item when 'Switching preout'

(page 26) is set to "SWPRE Sub-W".

• *² Function of the KDC-X579

5 Exit Audio Control mode

Press the [AUD] button.

Speaker Setting

Fine-tuning so that the System Q value is optimal

when setting the speaker type.

1 Enter Standby

Press the [SRC] button.

Select the "STANDBY" display.

2 Enter Speaker Setting mode

Press the [Q] button.

3 Select the Speaker type

Press the [4] or [¢] button.

Each time the button is pressed the setting

switches as shown below.

Speaker type Display

OFF "SP OFF"

For 5 & 4 in. speaker "SP 5/4inch"

For 6 & 6x9 in. speaker "SP 6*9/6inch"

For the OEM speaker "SP O.E.M."

4 Exit Speaker Setting mode

Press the [Q] button.

English

General features

Switching Display

Switching the information displayed.

Press the [DISP] button.

Each time the button is pressed the display

switches as shown below.

In Tuner source

Information Display

Station name or Frequency "SNPS"

Frequency "BAND+FREQ"

Clock

In CD & External disc source

Information Display

Disc title "D-TITLE"

Track title "T-TITLE"

Track number & Play time "P-Time"

Disc name "DNPS"

Clock

In MP3/WMA source

Information Display

Song title & Artist name "TITLE"

Album name & Artist name "ALB UM"

Folder name "FOLDER NAME"

File name "FILE NAME"

Track number & Play time "P-Time"

Clock

In HD Radio source

Information Display

Station name "Station Name"

Song title/ Artist name/

Album name/ Genre

"Title"

Frequency "Frequency"

Clock

In Auxiliary input source

Information

Auxiliary input name

Clock

•

If the Disc title, Track title, Song title & Artist name, or

Album name & Artist name is selected when the disc

which does not have Disc title, Track title, Song title,

Album name, or Artist name is played, track number

and play time are displayed.

Station/Disc Naming (SNPS/DNPS)

Attaching a title to a Station or CD.

1 Receive/play the station/disc you want to

attach a title to

• A title can’t be attached to an MD.

• Refer to the 'Switching Display' (page 12) and select

either "DNPS" or "SNPS". No name can be attached to

the source if "DNPS" or "SNPS" cannot be selected for

it.

2 Enter name set mode

Press the [NAME.S] button for at least 2

seconds.

"NAME SET" is displayed.

3 Move the cursor to the enter character

position

Press the [4] or [¢] button.

4 Select the character type

Press the [38] button.

Each time the button is pressed the character

type switches as shown below.

Character type

Alphabet upper case

Alphabet lower case

Numbers and symbols

Special characters (Accent characters)

5 Select the characters

Press the [FM] or [AM] button.

•

Characters can be entered by using a remote with a

number buttons.

Example: If "DANCE" is entered.

Character Button Times pressed

"D" [3] 1

"A" [2] 1

"N" [6] 2

"C" [2] 3

"E" [3] 2

6 Repeat steps 3 through 5 and enter the name.

7 Exit name set mode

Press the [NAME.S] button.

• When operation stops for 10 seconds the name at

English

that time is registered, and Name Set mode closes.

• Memory numbers

- FM: 32 stations

- AM: 16 stations

- Internal CD player: 30 discs

- External CD changer/ player: Varies according to the

CD changer/ player. Refer to the CD changer/ player

manual.

• The title of station/CD can be changed by the same

operation used to name it.

Auxiliary Input Display Setting

Selecting the display when this device is switched

to Auxiliary input source.

1 Select Auxiliary input source

Press the [SRC] button.

Select the "AUX EXT" display.

2 Enter Auxiliary input display setting mode

Press the [DISP] button for at least 2 seconds.

The presently selected AUX Name is blinks.

3 Select the Auxiliary input display

Press the [4] or [¢] button.

Each time the button is pressed it switches

through the below displays.

• "AUX EXT"

• "TV"

• "VIDEO"

• "GAME"

• "PORTABLE"

• "DVD"

4 Exit Auxiliary input display setting mode

Press the [DISP] button.

• When operation stops for 10 seconds, the name

at that time is selected, and Auxiliary input display

setting mode closes.

• The Auxiliary Input Display can be set only when the

built-in auxiliary input or the auxiliary input of optional

KCA-S210A is used.

Subwoofer Output

Turning the Subwoofer output ON or OFF.

Press the [SW] button for at least 1 second.

Each time the button is pressed Subwoofer

output switches ON or OFF.

When it’s ON, "Sub-W ON" is displayed.

• You can control this function when 'Switching preout'

(page 26) is set to "SWPRE Sub-W". (KDC-MPV525/

MPV5025/MP425 only)

English

General features

Theft Deterrent Faceplate

The faceplate of the unit can be detached and

taken with you, helping to deter theft.

Removing the Faceplate

1 Press the Release button.

Drop open the faceplate.

2 Drawing the faceplate to left side pull it to

the front and remove it.

• The faceplate is a precision piece of equipment and

can be damaged by shocks or jolts. For that reason,

keep the faceplate in its special storage case while

detached.

• Do not expose the faceplate or its storage case to

direct sunlight or excessive heat or humidity. Also

avoid places with too much dust or the possibility of

water splashing.

Reattaching the Faceplate

1 Align the shaft on the unit with the

depression on the faceplate.

2 Push the faceplate in until it clicks.

The faceplate is locked in place, allowing you to

use the unit.

TEL Mute

The audio system automatically mutes when a

call comes in.

When a call comes in

"CALL" is displayed.

The audio system pauses.

Listening to the audio during a call

Press the [SRC] button.

The "CALL" display disappears and the audio

system comes back ON.

When the call ends

Hang up the phone.

The "CALL" display disappears and the audio

system comes back ON.

English

Tuner features

Tuning Mode

Choose the tuning mode.

Press the [AUTO] button.

Each time the button is pressed the Tuning

mode switches as shown below.

Tuning mode Display Operation

Auto seek "Auto 1" Automatic search for a station.

Preset station seek "Auto 2" Search in order of the stations

in the Preset memory.

Manual "Manual" Normal manual tuning control.

Tuning

Selecting the station.

1 Select tuner source

Press the [SRC] button.

Select the "TUNER" display.

2 Select the band

Press the [FM] or [AM] button.

Each time the [FM] button is pressed it switches

between the FM1, FM2, and FM3 bands.

3 Tune up or down band

Press the [4] or [¢] button.

• During reception of stereo stations the "ST" indicator

is ON.

SCAN

AUD

RDM REP F.SEL M.RDM

SRC

AUTO/

AME

1–6

SRC

ST indicator Preset station number

Band display Frequency display

English

Tuner features

Function of remote

Direct Access Tuning

Entering the frequency and tuning.

1 Select the band

Press the [FM] or [AM] button.

2 Enter Direct Access Tuning mode

Press the [DIRECT] button on the remote.

"– – – –" is displayed.

3 Enter the frequency

Press the number buttons on the remote.

Example:

Desired frequency Press button

92.1 MHz (FM) [0], [9], [2], [1]

810 kHz (AM) [0], [8], [1], [0]

Canceling Direct Access Tuning

Press the [DIRECT] button on the remote.

Station Preset Memory

Putting the station in the memory.

1 Select the band

Press the [FM] or [AM] button.

2 Select the frequency to put in the memory

Press the [4] or [¢] button.

3 Put the frequency in the memory

Press the desired [1] — [6] button for at least

2 seconds.

The preset number display blinks 1 time.

On each band, 1 station can be put in the

memory on each [1] — [6] button.

Auto Memory Entry

Putting stations with good reception in the

memory automatically.

1 Select the band for Auto Memory Entry

Press the [FM] or [AM] button.

2 Open Auto Memory Entry

Press the [AME] button for at least 2 seconds.

When 6 stations that can be received are put in

the memory Auto Memory Entry closes.

Preset Tuning

Calling up the stations in the memory.

1 Select the band

Press the [FM] or [AM] button.

2 Call up the station

Press the desired [1] — [6] button.

English

CD/MP3/WMA/External disc control features

Playing External Disc

Playing discs set in the optional accessory disc

player connected to this unit.

Press the [SRC] button.

Select the display for the disc player you want.

Display examples:

Display Disc player

"CD2" CD player

"CD CH" CD changer

"MD CH" MD changer

Pause and play

Press the [38] button.

Each time the button is pressed it pauses and

plays.

• Disc 10 is displayed as "0".

• The functions that can be used and the information

that can be displayed will differ depending on the

external disc players being connected.

SCAN

AUD

RDM REP F.SEL M.RDM

SRC

DISP/

SCRL

SCAN M.RDMF.SELRDM/

REP

DISC–/

DISC+/

SRC

Disc number

IN indicator

Release button

English

CD/MP3/WMA/External disc control features

Playing CD & MP3/WMA

When there is no disc inserted

1 Drop open the faceplate

Press the Release button.

2 Insert a disc.

3 Press the faceplate on the left side, and

return it to its former position.

• When the faceplate has been dropped open, it might

interfere with the shift lever or something else. If this

happens, pay attention to safety and move the shift

lever or take an appropriate action, then operate the

unit.

• Do not use the unit with the faceplate in the open

condition. If it’s used in the open position dust can

enter the inside part and cause damage.

• When a disc is inserted, the "IN" indicator is ON.

When a disc is inserted

Press the [SRC] button.

Select the "CD" display.

Pause and play

Press the [38] button.

Each time the button is pressed it pauses and

plays.

Eject the disc

1 Drop open the faceplate

Press the Release button.

2 Eject the disc

Press the [0] button.

3 Press the faceplate on the left side, and

return it to its former position.

• 3 in. (8cm) disc can’t be played. Using an adapter and

inserting them into this unit can cause damage.

• The MP3/WMA media that this unit can play are CD-

ROM, CD-R, and CD-RW.

The medium formats must be ISO 9660 Level 1, Level

2, Joliet, or Romeo. The methods and precautions to

be followed for writing MP3/WMA data are covered in

'Notes on playing MP3/WMA' (page 8).

Check that section before creating your MP3/WMA

media.

Fast Forwarding and Reversing

Fast Forwarding

Hold down on the [¢] button.

Release your finger to play the disc at that point.

Reversing

Hold down on the [4] button.

Release your finger to play the disc at that point.

Track/File Search

Searching for a song on the disc or in the MP3/

WMA folder.

Press the [4] or [¢] button.

Function of disc changer/ MP3/ WMA

Disc Search/Folder Search

Selecting the disc set in the Disc changer or the

folder recorded on the MP3/WMA media.

Press the [DISC–] or [DISC+] button.

Function of remote

Direct Track/File Search

Doing Track/File Search by entering the track/file

number.

1 Enter the track/file number

Press the number buttons on the remote.

English

2 Do Track/File Search

Press the [4] or [¢] button.

Canceling Direct Track/File Search

Press the [38] button.

Function of disc changers with remote

Direct Disc Search

Doing Disc Search by entering the disc number.

1 Enter the disc number

Press the number buttons on the remote.

2 Do Disc Search

Press the [DISC+] or [DISC–] button.

Canceling Direct Disc Search

Press the [38] button.

• Input "0" to select disc 10.

Track/File/Disc/Folder Repeat

Replaying the song, disc in the Disc changer or

MP3/WMA folder you’re listening to.

Press the [REP] button.

Each time the button is pressed the Repeat Play

switches as shown below.

In CD & External disc source

Repeat play Display

Track Repeat "(T-)Repeat ON"

Disc Repeat (In Disc Changer) "D Repeat ON"

OFF "Repeat OFF"

In MP3/WMA source

Repeat play Display

File Repeat "File REP ON"

Folder Repeat "FOLD REP ON"

OFF "Repeat OFF"

Scan Play

Playing the first part of each song on the disc

or MP3/WMA folder you are listening to and

searching for the song you want to listen to.

1 Start Scan Play

Press the [SCAN] button.

"Scan ON" is displayed.

2 Release it when the song you want to listen

to is played

Press the [SCAN] button.

Random Play

Play all the songs on the disc or MP3/WMA folder

in random order.

Press the [RDM] button.

Each time the button is pressed Random Play

turns ON or OFF.

When it’s ON, "Random ON" is displayed.

• When the [¢] button is pressed, the next song

select starts.

Function of disc changer

Magazine Random Play

Play the songs on all the discs in the disc changer

in random order.

Press the [M.RDM] button.

Each time the button is pressed the Magazine

Random Play turns ON or OFF.

When it’s ON, "M-Random ON" is displayed.

• When the [¢] button is pressed, the next song

select starts.

English

CD/MP3/WMA/External disc control features

Function of MP3/WMA

Folder Select

Quickly selecting the folder you want to listen to.

1 Enter Folder Select mode

Press the [F.SEL] button.

"Select Mode" is displayed.

During Select mode the folder information is

displayed as shown below.

Folder name display

Displays the current folder name.

2 Select the folder level

Press the [FM] or [AM] button.

With the [FM] button you move 1 level down and

with the [AM] button 1 level up.

Selecting a folder in the same level

Press the [4] or [¢] button.

With the [4] button you move to the previous

folder, and with the [¢] button to the next

folder.

Returning to the top level

Press the [3] button.

3 Decide the folder to play

Press the [38] button.

The Folder Select mode releases, and the MP3/

WMA in the folder being displayed is played.

• The methods for moving to other folders in the folder

select mode are different from those in the folder

search mode.

See 'Notes on playing MP3/WMA' (page 8) for details.

Canceling the Folder Select mode

Press the [F.SEL] button.

Te xt/Title Scroll

Scrolling the displayed CD text, MP3/WMA text,

or MD title.

Press the [SCRL] button for at least 1 second.

Function of disc changers with remote

DNPP (Disc Name Preset Play)

Selecting the CD displayed in the DNPS of the

CDs set in the Disc changer.

1 Enter DNPP mode

Press the [DNPP] button on the remote.

When "DNPP" is displayed the DNPS display in

order.

Forward / Reverse display

Press the [DISC–] or [DISC+] button.

2 When the disc you want is displayed

Press the [OK] button on the remote.

The disc being displayed is played.

Canceling the DNPP mode

Press the [DNPP] button on the remote.

English

HD Radio control features

Tuning

Selecting the station.

1 Select HD Radio source

Press the [SRC] button.

Select the "HD Radio" display.

2 Select the HF band

Press the [FM] button.

Each time the [FM] button is pressed it switches

between the HF1, HF2, and HF3 bands.

Select the HA band

Press the [AM] button.

3 Tune up or down band

Press the [4] or [¢] button.

• When you connect an HD Radio, Tuner features of

the unit are disabled and switched to HD Radio tuner

features. A portion of the setting methods including

the Tuning Mode will change.

• With the HD Radio tuner, you can use the similar

functions to 'Station Preset Memory' and 'Preset

Tuning' of Tuner features. Refer to Tuner features for

how to use the functions.

• The HD Radio cannot be selected as a dual zone

source.

SCAN

AUD

RDM REP F.SEL M.RDM

SRC

ST indicator Preset station number

Band display Frequency display

English

HD Radio control features

Auto Memory Entry

Putting a station with good reception in the

memory automatically.

1 Select the band for Auto Memory Entry

Press the [FM] or [AM] button.

2 Enter Menu mode

Press the [MENU] button for at least 1 second.

"MENU" is displayed.

3 Select the Auto Memory Entry mode

Press the [FM] or [AM] button.

Select the "Auto-Memory" display.

4 Open Auto Memory Entry

Press the [4] or [¢] button for at least 2

seconds.

When 6 stations that can be received are put in

the memory Auto Memory Entry closes.

5 Exit Menu mode

Press the [MENU] button.

• The receiving method can be switched with the

setting of 'Receive mode Setting' (page 28).

English

Menu system

Menu System

Setting during operation beep sound etc.

functions.

The Menu system basic operation method is

explained here. The reference for the Menu items

and their setting content is after this operation

explanation.

1 Enter Menu mode

Press the [MENU] button for at least 1 second.

"MENU" is displayed.

2 Select the menu item

Press the [FM] or [AM] button.

Example: When you want to set the beep sound

select the "Beep" display.

3 Set the menu item

Press the [4] or [¢] button.

Example: When "Beep" is selected, each time the

button is pressed it switches "Beep ON"

or "Beep OFF". Select 1 of them as the

setting.

You can continue by returning to step 2 and

setting other items.

4 Exit Menu mode

Press the [MENU] button.

• When other items that are applicable to the basic

operation method above are displayed afterwards

their setting content chart is entered. (Normally the

uppermost setting in the chart is the original setting.)

Also, the explanation for items that aren’t applicable

('Manual Clock Adjustment' etc.) are entered step by

step.

SCAN

AUD

RDM REP F.SEL M.RDM

SRC

1–6

Menu display

English

Menu system

In Standby mode

Security Code

Because authorization by the Security Code is

required when it’s removed from the vehicle,

personalizing this unit is by using the Security

Code is a help in preventing theft.

• When the Security Code function is activated, the code

can’t be changed and the function can’t be released.

Note, the Security Code can be set as the 4 digit number

of your choice.

1 Enter Standby

Press the [SRC] button.

Select the "STANDBY" display.

2 Enter Menu mode

Press the [MENU] button for at least 1 second.

When "MENU" is displayed, "Security" is displayed.

3 Enter Security Code mode

Press the [4] or [¢] button for at least 1

second.

When "ENTER" is displayed, "CODE" is displayed.

4 Select the digits to enter

Press the [4] or [¢] button.

5 Select the Security Code numbers

Press the [FM] or [AM] button.

6 Repeat steps 4 and 5, and complete the

Security Code.

7 Confirm the Security Code

Press the [¢] button for at least 3 seconds.

When "RE-ENTER" is displayed, "CODE" is

displayed.

8 Do the step 4 through 7 operation, and

reenter the Security Code.

"APPROVED" is displayed.

The Security Code function activates.

• When the wrong Code is entered in steps 4 through 6,

repeat from step 4.

Press the Reset button and when it’s removed

from the battery power source

1 Turn the power ON.

2 Do the step 4 through 7 operation, and enter

the Security Code.

"APPROVED" is displayed.

The unit can be used.

Touch Sensor Tone

Setting the operation check sound (beep sound)

ON/OFF.

Display Setting

"Beep ON" Beep is heard.

"Beep OFF" Beep canceled.

Manual Clock Adjustment

1 Select Clock Adjustment mode

Press the [FM] or [AM] button.

Select the "Clock Adjust" display.

2 Enter Clock Adjust mode

Press the [4] or [¢] button for at least 1

second.

The clock display blinks.

3 Adjust the hours

Press the [FM] or [AM] button.

Adjust the minutes

Press the [4] or [¢] button.

4 Exit Clock adjustment mode

Press the [MENU] button.

DSI (Disabled System Indicator)

A red indicator will blink on the unit after the

faceplate is removed, warning potential thieves.

Display Setting

"DSI ON" LED flashes.

"DSI OFF" LED OFF.

English

Selectable Illumination

Selecting the button illumination color as green

or red.

Display Setting

"Color Red" The illumination color is red.

"Color Green" The illumination color is green.

Switching Display Type

Setting the Display type.

Display Setting

"DisplayC" D emonstration.

"DisplayA" Normal display type.

"DisplayB" Silent display type.

Function of the KDC-MPV525/KDC-MPV5025

Illumination Color Setting

You can set the display to a desired color.

1 Select Illumination Color Setting Mode

Press the [FM] or [AM] button.

Select the "COL" display.

2 The color continues to change gradually

Hold down on the [4] or [¢] button.

Release your finger at the color you want.

•

Colors adjusted using either [4] or [¢] will be

stored automatically, and they can be called by

pressing [5] button.

Quick call up the preset color

Press the desired [1] — [4] button.

Button Color

[1] Silky White

[2] Red

[3] Blue

[4] Blue Green

Selecting the Color mode

Press the [6] button.

Each time the button is pressed the Color mode

switches as shown below.

Display Color mode

"Scan" The color changes in sequence.

"SRC" The color changes according to the selected source.

"Time" The color changes every 6 hours.

Keeps the presently set color.

Blue fine adjustment

1 Press the [3] button for at least 2 seconds.

2 Press the [4] or [¢] button.

When the blue fine adjustment is completed,

press the [3] button.

Contrast Adjustment

Adjusting the display contrast.

Display and Setting

"Contrast 0"

…

"Contrast 10"

Dimmer

Dimming this unit’s display automatically when

the vehicle light switch is turned ON.

Display Setting

"Dimmer ON" The display dims.

"Dimmer OFF" The display doesn’t dim.

English

Menu system

Function of the KDC-X579

System Q Setting

Setting whether the display indicates the System

Q factors (Bass center frequency, Bass Q factor,

Bass extend, Middle center frequency, Middle

Q factor, and Treble center frequency) in Audio

control.

Display Setting

"System Q ON" The System Q factors are displayed.

"System Q OFF" The System Q factors aren’t displayed.

Function of the KDC-MPV525/KDC-MPV5025/

KDC-MP425

In Standby mode

Switching preout

Switching the preout between the rear and

subwoofer. (In subwoofer it outputs without

effect from the fader control.)

Display Setting

"SWPRE Rear" Rear preout.

"SWPRE Sub-W" Subwoofer preout.

Function of the KDC-X579

In Standby mode

Built-in Amp Mute Setting

Toggles ON or OFF the mute control on the built-

in amplifier.

Turning ON this control enhances the preout

quality.

Display Setting

"AMP Mute OFF" The built-in amplifier activates.

"AMP Mute ON" The built-in amplifier deactivates.

In SIRIUS tuner source

SIRIUS ID (ESN) display

Displaying the SIRIUS ID (Electronic Serial

Number) display.

Display

"ESN = ************"

• Serial & SIRIUS ID (ESN)

It is especially important to retain the unit serial

number and the electronic SIRIUS Identification

number for service activation and potential future

service changes.

Function of the KDC-X579/KDC-MPV5025

In SIRIUS Tuner, External disc, or Auxiliary input

source

Dual Zone System

Makes the sound different for the front channel

and rear channel.

Display Setting

"Zone 2 OFF" The front and rear are the same source sound.

"Zone 2 ON" The front and rear are the different source sound.

• When the Dual Zone System is on, there is only sound

effect including Audio control for internal source.

• When you set the Dual zone system to ON while the

sub woofer preout is switched ON, the sound of the

sub woofer preout isn’t output.

• When the source is selected to VZ-7000P/N (optional

accessory), the VZ-7000P/N’s sound is not output if the

Dual Zone System is turned ON.

Function of the KDC-X579/KDC-MPV5025

When the Dual Zone System is OFF

Dual Zone System Setting

Setting the Front channel and Rear channel

sound in the Dual Zone System.

Display Setting

"Zone 2 Rear" The front is this unit’s internal source, and the rear

is selected source sound.

"Zone 2 Front" The rear is this unit’s internal source, and the front

is selected source sound.

English

Function of the KDC-X579

B.M.S. (Bass Management System)

Adjust the bass boost level of the external

amplifier using the main unit.

Display Setting

"AMP Bass FLT" Bass boost level is flat.

"AMP Bass +6" Bass boost level is low (+6dB).

"AMP Bass +12" B ass boost level is mid (+12dB).

"AMP Bass +18" B ass boost level is high (+18dB).

• Refer to the catalog or instruction manual for power

amplifiers that can be controlled from this unit.

• For amplifiers there are the model that can be set

from Flat to +18 dB, and the model that can be set

from Flat to +12 dB.

When an amplifier that can only be set to +12 is

connected to the unit, "AMP Bass +18" won’t work

correctly even if it’s selected.

Function of the KDC-X579

B.M.S. Frequency Offset

Setting the central frequency boosted by B.M.S.

Display Setting

"AMP Freq NML" Boost with the normal central frequency.

"AMP Freq Low" Drop the normal central frequency 20%.

In FM reception

CRSC (Clean Reception System

Circuit)

Temporarily have reception switched from

stereo to mono to reduce multi-path noise when

listening to the FM station.

Display Setting

"CRSC ON" The CRSC is ON.

"CRSC OFF" The CRSC is OFF.

• Strong electrical fields (such as from power lines) may

cause unstable sound quality when CRSC is turned

ON. In such a situation, turn it OFF.

Te xt Scroll

Setting the displayed text scroll.

Display Setting

"Scroll Auto" Repeats scroll.

"Scroll MANU" Scrolls when the display changes.

• The text scrolled is shown below.

- CD text

- Folder name/ File name/ Song title/ Artist name/

Album name

- MD title

- Text for the SIRIUS tuner source, HD Radio source,

including Channel name, etc.

In Standby mode

CD Read Setting

When there is a problem on playing a CD with

special format, this setting play the CD by force.

Display Setting

"CD READ 1" Play CD and MP3/WMA.

"CD READ 2" Play CD by force.

• Setting "CD READ 2" cannot play MP3/WMA.

Some music CDs may not be played back even in the

"CD READ 2" mode.

English

Menu system

Function of the KDC-X579

When LX AMP unit connecting

AMP Control

You can control the LX AMP connected to the

unit.

1 Select AMP Control mode

Press the [FM] or [AM] button.

Select the "AMP Control" display.

2 Enter AMP Control mode

Press the [4] or [¢] button for at least 1

second.

3 Select the AMP Control item for adjustment

Press the [FM] or [AM] button.

• For the details of the AMP Control item, see the

Instruction manual attached to the LX AMP.

4 Adjust the AMP Control item

Press the [4] or [¢] button.

5 Exit AMP Control mode

Press the [MENU] button.

• You cannot use the LX AMP operation during standby

mode.

In HD Radio mode

Receive mode Setting

Sets the receive mode.

1 Select the Receive mode

Press the [FM] or [AM] button.

Select the "Receive Mode" display.

2 Open Receive mode

Press the [4] or [¢] button for at least 1

second.

3 Set the Receive mode

Press the [FM] or [AM] button.

Each time the button is pressed the Receive

mode switches as shown below.

In HD Radio mode

Tuning Mode

Sets the tuning mode.

Tuning mode Display Operation

Auto seek "Auto 1" Automatic search for a station.

Preset station seek "Auto 2" Search in order of the stations

in the Preset memory.

Manual "Manual" Normal manual tuning control.

In HD Radio mode

Auto Memory Entry

For the operation method refer to 'Auto Memory

Entry' (page 22).

Receive mode Display Operation

Auto mode "Auto"

Analog broadcasts and digital

broadcasts will be switched

automatically.

When both are being transmitted,

the digital broadcast will have

priority.

Digital "Digital" Digital broadcasts only.

Analog "Analog" Analog broadcasts only.

4 Exit Receive mode

Press the [MENU] button.

• Even if the "Auto" setting, an analog broadcast will be

received during the reception of a ball game mode

(non-delayed broadcast program).

English

Basic Operations of remote

Loading and Replacing the battery

Use two "AA"-size batteries.

Slide the cover while pressing downwards to

remove it as illustrated.

Insert the batteries with the + and – poles aligned

properly, following the illustration inside the case.

2WARNING

• Store unused batteries out of the reach of children.

Contact a doctor immediately if the battery is

accidentally swallowed.

• Do not set the remote on hot places such as above

the dashboard.

Basic operations

[VOL.] buttons

Adjusting the volume.

[SRC] button

Each time the button is pressed the source

switches.

For the source switching order refer to 'Selecting

the Source' (page 10).

[ATT] button

Turning the volume down quickly.

When it is pressed again it returns to the previous

level.

ATT

DIRECT/OK

[0] — [9]

SRC

4/¢

FM/AM/DISC

/DISC–

DNPP

VOL.

SRC

DIRECT

/OK

DNPP

/SBF

ABC DEF

JKLGHI MNO

TUV

PRS WXY

VOL.

ATT

DISC

AM–

¢4

Not Used

English

Basic Operations of remote

In Tuner source

[FM]/ [AM] buttons

Select the band.

Each time the [FM] button is pressed it switches

between the FM1, FM2, and FM3 bands.

[4]/ [¢] buttons

Tune up or down band.

[0] — [9] buttons

Press buttons [1] — [6] to recall preset stations.

[DIRECT]/ [OK] button

Enters and cancels the 'Direct Access Tuning'

(page 16) mode.

In Disc source

[4]/ [¢] buttons

Doing track/file forward and backward.

[DISC+]/ [DISC–] buttons

Doing disc/folder forward and backward.

[38] button

Each time the button is pressed the song pauses

and plays.

[DNPP] button

Enters and cancels the 'DNPP (Disc Name Preset

Play)' (page 20) mode.

[0] — [9] buttons

When in 'Direct Track/File Search' (page 18) and

'Direct Disc Search' (page 19), enter the track/file/

disc number.

In HD Radio source

[FM] button

Select the HF band.

Each time the [FM] button is pressed it switches

between the HF1, HF2, and HF3 bands.

[AM] button

Select the HA band.

[4]/ [¢] buttons

Tune up or down band.

[0] — [9] buttons

Press buttons [1] — [6] to recall preset stations.

+ 86 hidden pages

Kenwood KDC-MPV5025 User Manual

English

Contents

2Warning

Safety precautions

Notes

About CDs

Notes on playing MP3/WMA

General features

Tuner features

CD/MP3/WMA/External disc control features

HD Radio control features

Menu system

Basic Operations of remote