Honeywell DPTM50, DPTM110, DPTM550, DPTM1100, DPTM100 Manual
...
DPTM50-5000
3-WIRE DIFFERENTIAL PRESSURE TRANSMITTERS WITH CURRENT AND VOLTAGE OUTPUT
GENERAL
The differential pressure transmitters of the DPTM series are used for measuring differential pressure, positive pressure, and vacuum. The transmitters are suitable for:
•air-conditioning,
•building automation,
•environmental protection,
•valve and flap control,
•filter and blower monitoring,
•fluid and level monitoring, and
•control of air flows.
Models
|
order no. |
|
pressure range |
|
overload |
|
bursting |
|
||
|
|
1 (pre-set) |
|
2 |
|
capacity |
|
pressure |
|
|
|
|
|
|
|
|
|
||||
|
DPTM50 |
|
-50...0...+50 Pa1) |
|
n.a. |
|
20 kPa |
|
40 kPa |
|
|
DPTM110 |
|
-100...0...+100 Pa1 |
|
n.a. |
|
20 kPa |
|
40 kPa |
|
|
DPTM550 |
|
-500...0...+500 Pa1) |
|
n.a. |
|
20 kPa |
|
40 kPa |
|
|
DPTM1100 |
|
-1 kPa...0...+ 1 kPa2) |
|
n.a. |
|
40 kPa |
|
70 kPa |
|
|
DPTM100 |
|
0...100 Pa1) |
|
0...250 Pa |
|
20 kPa |
|
40 kPa |
|
|
DPTM250 |
|
0...250 Pa1) |
|
0...500 Pa |
|
20 kPa |
|
40 kPa |
|
|
DPTM500 |
|
0...500 Pa1) |
|
0...1 kPa |
|
20 kPa |
|
40 kPa |
|
|
DPTM1000 |
|
0...1 kPa2) |
|
0...2.5 kPa |
|
40 kPa |
|
70 kPa |
|
|
DPTM5000 |
|
0...5 kPa3) |
|
0...10 kPa |
|
60 kPa |
|
120 kPa |
|
1) Temperature error at 0…50 °C ≤ ± 5% of FS 2) Temperature error at 0…50 °C ≤ ± 2.5% of FS 3) Temperature error at 0…50 °C ≤ ± 1% of FS
SPECIFICATION DATA & MOUNTING INSTRUCTIONS
FEATURES
•Monitoring gaseous, non-aggressive media
•Piezo-resistive pressure transducer
•Up to 40 kPa (60 kPa) overload capacity
•Rugged design; protection class IP54
•Easy installation and wiring connection
•Measurement range adjustable by jumper
•Response time adjustable by jumper
•Output signal adjustable by jumper
•Re-zeroing possible by pushbutton
NOTE: These sensors are not suitable for use in installations under periodic inspection by the U.S. Food and Drug Administration.
SPECIFICATION
Supply voltage |
18...30 Vac/dc, 50/60 Hz |
Output signal |
0...10 Vdc, 4…20 mA |
Pressure medium |
Air, non-aggressive gases |
Working temperature |
0...50 °C |
Linearity and hysteresis error |
≤ ± 1.0% of FS |
Temperature error at 0...50°C |
See section "Models" |
Storage temperature |
-10...+70 °C |
Humidity |
0...95% rh, non-condensing |
Repetition accuracy |
≤ ± 0.2% of FS |
Response time |
1 s (switchable to 100 ms) |
Process connection |
6 mm hose pipe |
Electrical connection |
Screw terminal block for wire |
|
up to 1.5 mm² |
Housing material |
ABS and POM |
Cable entry |
M20x1.5 (polyamide) |
Protection class |
IP54 as per EN60529 |
EMV |
EN60770, EN61326 |
Weight |
approx. 130 g |
® U.S. Registered Trademark |
|
EN0B-0466GE51 R1007 |
Copyright © 2007 Honeywell Inc. • All rights reserved |
|
|
|
|
Loading...