Honeywell COMP230-P37-20, COMP230-P75-20, COMP230-1P1-20, COMP230-1P5-20, COMP230-2P2-20 PRODUCT DATA

COMP230-xxx-20 / COMP400-xxx-20

SMARTDRIVE COMPACT INVERTERS

PRODUCT DATA

SPECIFICATIONS

Mains Connection

			Input voltage Uin	208…240 Vac (-15…+10%), 1~
				380…480 Vac (-15…+10%), 3~
			Input frequency	45…66 Hz
			Connection to mains	Once per minute or less
			Brake chopper	Integrated as standard in
				380…480 Vac products from
				1.5 kW and up
			Motor Connection
	GENERAL		Output voltage	0 - Uin, 3~
				with max. +50 °C ambient
			Output current	IN: Continuous output current
	These variable frequency drives provide step less speed			temperature, overloadability
	control for various applications:			1.5 x IN (1min/10min)
		Pumps	Starting current	2 x IN 2s/20s
		Fans	Output frequency	0…320 Hz
		Compressors
			Frequency resolution	0.01 Hz
		Conveyors, etc.

FEATURES

Compact size

Flexible side-by-side mounting with screws or DIN-rail as standard

Single rating suitable for both pump and fan or machine applications

Maximum ambient temperature: +50 °C

Integrated RFI-filters

Wide Input and Output connection possibilities

Configurable inputs and outputs

30s Start-Up Wizard

Easy “keypad – remote” change with 1 button

Parameter upload/download even without powering the inverter with COMP-LOADER accessory

Silent motor operation with 4 kHz switching frequency

Overtemperature ride-through

Power ride-through

Automatic restart

Integrated PI controller

Control Characteristics

Control method	Frequency Control U/f
	Open Loop Sensorless Vector
	Control
Switching frequency	1.5...16 kHz;
	default 4 kHz
Field weakening point	30…320 Hz
Acceleration time	0.1…3000 sec
Deceleration time	0.1…3000 sec
Braking torque	DC-brake: 30%*TN (without
	brake resistor)
Ambient Conditions
Operating temperature	-10 °C (no frost)…+50 °C
	ambient: rated loadability IN
	NOTE: Two models with max.
	operating temperature of +40 °C.
	See table on page 3.
Storage temperature	-40 °C…+70 °C

® U.S. Registered Trademark	EN0B-0638GE51 R1009
Copyright © 2009 Honeywell Inc. • All rights reserved

SmartDrive COMPACT VARIABLE FREQUENCY DRIVES

Air quality
Chemical vapors	IEC 721-3-3, unit in operation,
	class 3C2
Mechanical particles	IEC 721-3-3, unit in operation,
	class 3S2
Altitude	100% load capacity (no derating)
	up to 1000 m
	1% derating for each 100 m
	above 1000 m; max. 2000 m
Relative humidity	0…95% RH, non-condensing,
	non-corrosive, no dripping water
Vibration	3...150 Hz
EN50178, EN60068-2-6	Displacement amplitude 1(peak)
	mm at 3...15.8 Hz
	Max acceleration amplitude 1 g
	at 15.8...150 Hz
Shock	UPS Drop Test (for applicable
EN50178, IEC 68-2-27	UPS weights)
	Storage and shipping: max 15 g,
	11 ms (in package)
Enclosure class	IP20
Electro Magnetic Compatibility (EMC)
Immunity	Complies with EN50082-1, -2,
	EN61800-3
Emissions
Standard product	EN 61800-3 Category C2 (EMC-
	level H)
With external RFI-filter	EN 61800-3 Category C1 (EMC-
	level C)
Safety
EN60204-1, EN 61800-5	CE
UL508C	UL, cUL
(see unit nameplate for more detailed approvals)
Control connections
Analog input voltage	0...+10V, Ri = 200kΩ (min),
	Resolution 10 bit, accuracy ±1%,
	electrically isolated
Analog input current	0(4)…20 mA, Ri = 200Ω
	differential resolution 0.1%,
	accuracy ±1%, electrically
	isolated
Digital inputs	6 positive logic; 0…+30 VDC
Voltage output for	+24V, ±20%, max. load 50 mA
digital inputs
Output reference voltage	+10V, +3%, max. load 10 mA

Analog output	0(4)…20 mA; RL max. 500 Ω;
	resolution 16 bit; accuracy ±1%
Digital outputs
Relays	2 programmable relay outputs (1
	NO/NC and 1 NO),
	Max.switching load: 250 Vac/2 A
	or 250 Vdc/0.4 A
Open collector	1 open collector output with max.
	load 48 V/50 mA

Protections

Overvoltage protection	875VDC in COMP400-xxx-20
	437VDC in COMP230-xxx-20
Undervoltage protection	333VDC in COMP400-xxx-20
	160VDC in COMP230-xxx-20
Earth-fault protection	In case of earth fault in motor or
	motor cable, only the frequency
	converter is protected
Unit overtemperature	YES
protection
Motor overload	YES
protection
Motor stall protection	YES
(fan/pump blocked)
Motor underload	YES
protection (pump dry /
belt broken detection)
Short-circuit protection	YES
of +24V and +10V
reference voltages
Overcurrent protection	Trip limit 4,0*IN instantaneously

EN0B-0638GE51 R1009

2

SmartDrive COMPACT VARIABLE FREQUENCY DRIVES

MODELS

Mains voltage 230 V (208-240 V), 50/60 Hz, 1~in/3~out

Motor nominal

Loadability

Dimensions

power

Rated

50% overload

Enclosure

Mechanical

Weight

Inverter type

WxHxD

230V supply

continuous

current

class

size

[kg]

current IN

[mm]

50 °C P[kW]

[A]

[A]

COMP230-P37-20

0.37

2.4

3.6

IP20

MI1

66x157x98

0.55

COMP230-P75-20

0.75

3.7

5.6

IP20

MI2

90x195x102

0.7

COMP230-1P1-20

1.1

4.8

7.2

IP20

MI2

90x195x102

0.7

COMP230-1P5-20

1.5

7.0

10.5

IP20

MI2

90x195x102

0.7

COMP230-2P2-20 *)

2.2

9.6

14.4

IP20

MI3

100x251x109

1

*) The unit has max. +40 °C ambient temperature

Mains voltage 400 V (380480 V), 50/60 Hz, 3~

Motor nominal

Loadability

Dimensions

Inverter type

power

Rated

50% overload

Enclosure

Mechanical

Weight

continuous

WxHxD

400V supply

current IN

current

class

size

[mm]

[kg]

50 °C P[kW]

[A]

[A]

COMP400-P55-20

0.55

1.9

2.9

IP20

MI1

66x157x98

0.55

COMP400-P75-20

0.75

2.4

3.6

IP20

MI1

66x157x98

0.55

COMP400-1P1-20

1.1

3.3

5.0

IP20

MI2

90x195x102

0.7

COMP400-1P5-20

1,5

4.3

6.5

IP20

MI2

90x195x102

0.7

COMP400-2P2-20

2.2

5.6

8.4

IP20

MI2

90x195x102

0.7

COMP400-3P0-20

3.0

7.6

11.4

IP20

MI3

100x251x109

1

COMP400-4P0-20

4.0

9.0

13.5

IP20

MI3

100x251x109

1

COMP400-5P5-20 *)

5.5

12.0

18.0

IP20

MI3

100x251x109

1

*) The unit has max. +40 °C ambient temperature

PRODUCT IDENTIFICATION CODE

COMP 400 - 1P1 - 20

Enclosure classification 20 = IP20

Nominal power P75 = 0.75 kW 1P1 = 1.1 kW etc.

Supply voltage

230 = 230 Vac 1~ (208-240 Vac)

400 = 400 Vac 3~ (380-480 Vac)

Product range: COMP = SmartDrive Compact

Fig. 1. Product Identification Code

3	EN0B-0638GE51 R1009