Epson CX7400, DX7400 NX200, TX203, TX209 SX200, SX205 Schematic

SERVICE MANUAL

Color Inkjet Printer

EPSON Stylus CX7300/CX7400/DX7400

NX200/TX200/TX203/TX209

SX200/SX205

EPSON Stylus CX8300/CX8400/DX8400

NX400/TX400/TX405/TX409

SX400/SX405

Confidential

SEMF07-001

Notice:

All rights reserved. No part of this manual may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of SEIKO EPSON CORPORATION.

The contents of this manual are subject to change without notice.

All effort have been made to ensure the accuracy of the contents of this manual. However, should any errors be detected, SEIKO EPSON would greatly appreciate being informed of them.

The above not withstanding SEIKO EPSON CORPORATION can assume no responsibility for any errors in this manual or the consequences thereof.

EPSON is a registered trademark of SEIKO EPSON CORPORATION.

General Notice:	Other product names used herein are for identification purpose only and may be trademarks or registered trademarks of their
	respective owners. EPSON disclaims any and all rights in those marks.

Copyright © 2008 SEIKO EPSON CORPORATION.

Imaging Products CS, PL & Environmental Management

Confidential

	PRECAUTIONS
Precautionary notations throughout the text are categorized relative to 1) Personal injury and 2) damage to equipment.
DANGER	Signals a precaution which, if ignored, could result in serious or fatal personal injury. Great caution should be exercised in performing procedures preceded by
	DANGER Headings.
WARNING	Signals a precaution which, if ignored, could result in damage to equipment.

The precautionary measures itemized below should always be observed when performing repair/maintenance procedures.

DANGER

1.ALWAYS DISCONNECT THE PRODUCT FROM THE POWER SOURCE AND PERIPHERAL DEVICES PERFORMING ANY MAINTENANCE OR REPAIR PROCEDURES.

2.NO WORK SHOULD BE PERFORMED ON THE UNIT BY PERSONS UNFAMILIAR WITH BASIC SAFETY MEASURES AS DICTATED FOR ALL ELECTRONICS TECHNICIANS IN THEIR LINE OF WORK.

3.WHEN PERFORMING TESTING AS DICTATED WITHIN THIS MANUAL, DO NOT CONNECT THE UNIT TO A POWER SOURCE UNTIL INSTRUCTED TO DO SO. WHEN THE POWER SUPPLY CABLE MUST BE CONNECTED, USE EXTREME CAUTION IN WORKING ON POWER SUPPLY AND OTHER ELECTRONIC COMPONENTS.

4.WHEN DISASSEMBLING OR ASSEMBLING A PRODUCT, MAKE SURE TO WEAR GLOVES TO AVOID INJURIER FROM METAL PARTS WITH SHARP EDGES.

WARNING

1.REPAIRS ON EPSON PRODUCT SHOULD BE PERFORMED ONLY BY AN EPSON CERTIFIED REPAIR TECHNICIAN.

2.MAKE CERTAIN THAT THE SOURCE VOLTAGES IS THE SAME AS THE RATED VOLTAGE, LISTED ON THE SERIAL NUMBER/RATING PLATE. IF THE EPSON PRODUCT HAS A PRIMARY AC RATING DIFFERENT FROM AVAILABLE POWER SOURCE, DO NOT CONNECT IT TO THE POWER SOURCE.

3.ALWAYS VERIFY THAT THE EPSON PRODUCT HAS BEEN DISCONNECTED FROM THE POWER SOURCE BEFORE REMOVING OR REPLACING PRINTED CIRCUIT BOARDS AND/OR INDIVIDUAL CHIPS.

4.IN ORDER TO PROTECT SENSITIVE MICROPROCESSORS AND CIRCUITRY, USE STATIC DISCHARGE EQUIPMENT, SUCH AS ANTI-STATIC WRIST STRAPS, WHEN ACCESSING INTERNAL COMPONENTS.

5.REPLACE MALFUNCTIONING COMPONENTS ONLY WITH THOSE COMPONENTS BY THE MANUFACTURE; INTRODUCTION OF SECOND-SOURCE ICs OR OTHER NON-APPROVED COMPONENTS MAY DAMAGE THE PRODUCT AND VOID ANY APPLICABLE EPSON WARRANTY.

6.WHEN USING COMPRESSED AIR PRODUCTS; SUCH AS AIR DUSTER, FOR CLEANING DURING REPAIR AND MAINTENANCE, THE USE OF SUCH PRODUCTS CONTAINING FLAMMABLE GAS IS PROHIBITED.

Confidential

About This Manual

This manual describes basic functions, theory of electrical and mechanical operations, maintenance and repair procedures of the printer. The instructions and procedures included herein are intended for the experienced repair technicians, and attention should be given to the precautions on the preceding page.

Manual Configuration

This manual consists of six chapters and Appendix.

CHAPTER 1.PRODUCT DESCRIPTIONS

Provides a general overview and specifications of the product.

CHAPTER 2.OPERATING PRINCIPLES

Describes the theory of electrical and mechanical operations of the product.

CHAPTER 3.TROUBLESHOOTING

Describes the step-by-step procedures for the troubleshooting.

CHAPTER 4.DISASSEMBLY / ASSEMBLY

Describes the step-by-step procedures for disassembling and assembling the product.

CHAPTER 5.ADJUSTMENT

Provides Epson-approved methods for adjustment.

CHAPTER 6.MAINTENANCE

Provides preventive maintenance procedures and the lists of Epsonapproved lubricants and adhesives required for servicing the product.

APPENDIX Provides the following additional information for reference:

•Exploded Diagram

•Parts List

Symbols Used in this Manual

Various symbols are used throughout this manual either to provide additional information on a specific topic or to warn of possible danger present during a procedure or an action. Be aware of all symbols when they are used, and always read NOTE, CAUTION, or WARNING messages.

ADJUSTMENT	Indicates an operating or maintenance procedure, practice or condition
REQUIRED	that is necessary to keep the product’s quality.

Indicates an operating or maintenance procedure, practice, or condition CAUTION that, if not strictly observed, could result in damage to, or destruction of,

equipment.

CHECK

May indicate an operating or maintenance procedure, practice or

POINT condition that is necessary to accomplish a task efficiently. It may also provide additional information that is related to a specific subject, or

comment on the results achieved through a previous action.

Indicates an operating or maintenance procedure, practice or condition WARNING that, if not strictly observed, could result in injury or loss of life.

Indicates that a particular task must be carried out according to a certain standard after disassembly and before re-assembly, otherwise the quality of the components in question may be adversely affected.

Confidential

		Revision Status
Revision	Date of Issue	Description
A	August 9, 2007	First Release
B	May 20, 2008	Revised Contents
		Descriptions about Epson Stylus TX200/TX203/SX200/SX205/TX400/TX405/SX400/SX405 are added.
		Chapter 1
		“CHECK POINT” has been added in 1.1 Features (p9).
		Descriptions have been added in 1.1 Features (p9).
		Made changes in Table 1-2 “Product No. of Ink Cartridges” (p10).
		Made changes in Table 1-6 “Supported Paper” (p13).
		Made changes in Table 1-10 “Primary Power Specifications” (p16).
		Made changes in 1.4.3 Durability (p17).
		Made changes in 1.4.5 Safety Approvals (Safety standards/EMI) (p17).
		Made changes in Table 1-13 “Device ID” (p17).
		“CAUTION” has been added in 1.5.2 Memory Card Slots (p18).
		Made changes in Table 1-15 “List of Supported Memory Card” (p18).
		Made changes in Figure 1-11 “Nozzle Check Pattern” (p39).
		Chapter 2
		2.3 Electrical Circuit Operating Principles has been deleted.
		Chapter 3
		Made changes in 3.1 Overview (p59).
		Made changes in Table 3-12 “Check point for Memory Card error according to each phenomenon” (p77).
		Chapter 4
		“CHECK POINT” has been added in 4.1 Overview (p91).
		Chapter 7
		7.2 Electrical Circuits has been deleted.
C	July 15, 2008	Revised Contents
		All Chapter
		The model name; Epson Stylus NX200/TX209/NX400/TX409 are added.

Confidential

EPSON Stylus CX7300/CX7400/DX7400/NX200/TX200 series/SX200 series/Stylus CX8300/CX8400/DX8400/NX400/TX400 series/SX400 series Revision C

Contents

Chapter 1 PRODUCT DESCRIPTION
1.1	Features..................................................................................................................	9
1.2	Printing Specifications.........................................................................................	10
	1.2.1 Basic Specifications....................................................................................	10
	1.2.2 Ink Cartridge...............................................................................................	10
	1.2.3 Print Mode ..................................................................................................	11
	1.2.4 Supported Paper..........................................................................................	13
	1.2.5 Printing Area...............................................................................................	15
1.3	Scanner Specifications.........................................................................................	15
	1.3.1 Scanning Range ..........................................................................................	15
1.4	General Specifications.........................................................................................	16
	1.4.1 Electrical Specifications .............................................................................	16
	1.4.2 Environmental Conditions ..........................................................................	16
	1.4.3 Durability....................................................................................................	17
	1.4.4 Acoustic Noise............................................................................................	17
	1.4.5 Safety Approvals (Safety standards/EMI) ..................................................	17
1.5	Interface...............................................................................................................	17
	1.5.1 USB Interface .............................................................................................	17
	1.5.2 Memory Card Slots.....................................................................................	18
1.6	Control Panel .......................................................................................................	19
	1.6.1 Operation Buttons & LEDs ........................................................................	19
	1.6.2 Control Panel Functions in Each Mode ......................................................	21
1.7	Specification for Each Function ..........................................................................	29
	1.7.1 Stand-alone Copy Function ........................................................................	29
	1.7.2 Memory Card Direct Print Function...........................................................	31
	1.7.3 Camera Direct Print Function (USB Direct Print/PictBridge) ...................	36
	1.7.4 Reprint/Restore Photos Function (CX8300/TX400 series only) ................	38
	1.7.5 Setup Mode.................................................................................................	39

Chapter 2 OPERATING PRINCIPLES
2.1	Overview .............................................................................................................	42
	2.1.1 Printer Mechanism......................................................................................	42
	2.1.2 Motors & Sensors .......................................................................................	43
	2.1.3 Printhead.....................................................................................................	44
	2.1.4 Carriage Mechanism...................................................................................	46
	2.1.5 Paper Loading/Paper Feed Mechanism ......................................................	47
	2.1.6 Ink System Mechanism ..............................................................................	52
	2.1.7 Ink Sequence...............................................................................................	55
2.2	Scanner Mechanism ............................................................................................	56
	2.2.1 Scanner Carriage Mechanism.....................................................................	56
Chapter 3 TROUBLESHOOTING
3.1	Overview .............................................................................................................	59
	3.1.1 Specified Tools ...........................................................................................	59
	3.1.2 Preliminary Checks.....................................................................................	59
3.2	Troubleshooting...................................................................................................	60
	3.2.1 Motor and Sensor Troubleshooting ............................................................	60
3.3	Error Indications and Fault Occurrence Causes ..................................................	61
	3.3.1 Error Indication Method .............................................................................	61
	3.3.2 Troubleshooting by Error Message ............................................................	65
	3.3.3 Superficial Phenomenon-Based Troubleshooting ......................................	83

6

Confidential

EPSON Stylus CX7300/CX7400/DX7400/NX200/TX200 series/SX200 series/Stylus CX8300/CX8400/DX8400/NX400/TX400 series/SX400 series Revision C

Chapter 4 DISASSEMBLY/ASSEMBLY
4.1 Overview .............................................................................................................	91
4.1.1 Precautions..................................................................................................	91
4.1.2 Tools ...........................................................................................................	92
4.1.3 Work Completion Check ............................................................................	92
4.1.4 Procedural Differences between the Models ..............................................	94
4.2 Disassembly Procedures......................................................................................	95
4.3 Removing the Housing ........................................................................................	96
4.3.1 Paper Support Assy.....................................................................................	96
4.3.2 Stacker Assy ...............................................................................................	96
4.3.3 Document Cover/ASF Cover......................................................................	97
4.3.4 Scanner Unit/Hinge ....................................................................................	98
4.3.5 Upper Housing/Card Slot Cover...............................................................	100
4.4 Removing the Circuit Boards ............................................................................	101
4.4.1 Main Board Unit .......................................................................................	101
4.4.2 Panel Unit/LCD Unit ................................................................................	103
4.4.3 Power Supply Unit....................................................................................	105
4.5 Disassembling the Printer Mechanism ..............................................................	107
4.5.1 Printhead ...................................................................................................	107
4.5.2 CR Scale ...................................................................................................	109
4.5.3 Hopper ......................................................................................................	110
4.5.4 Removing the Printer Mechanism (Lower Housing)................................	111
4.5.5 Left Frame ................................................................................................	113
4.5.6 Front Frame/Right Frame .........................................................................	114
4.5.7 Star Wheel Holder Assy ...........................................................................	116
4.5.8 EJ Roller ...................................................................................................	116
4.5.9 PF Encoder Sensor....................................................................................	117
4.5.10 PF Scale ..................................................................................................	118
4.5.11 PF Motor.................................................................................................	119
4.5.12 CR Motor ................................................................................................	120
4.5.13 Main Frame Assy....................................................................................	122
4.5.14 CR Unit...................................................................................................	124
4.5.15 Upper Paper Guide .................................................................................	126
4.5.16 ASF Unit.................................................................................................	126
4.5.17 Ink System Unit ......................................................................................	128
4.5.18 Front Paper Guide...................................................................................	131
4.5.19 PF Roller.................................................................................................	132
4.5.20 Waste Ink Pads .......................................................................................	133

4.6 Disassembling the Scanner Unit........................................................................	134
4.6.1 Upper/Front Scanner Housing ..................................................................	134
4.6.2 Scanner Carriage Unit ..............................................................................	135
4.6.3 Scanner Motor Unit ..................................................................................	138
4.7 Differences in Disassembling/Reassembling Stylus CX7300/TX200 series ....	139
4.7.1 Panel Unit (CX7300/TX200 series) .........................................................	139
Chapter 5 ADJUSTMENT
5.1 Adjustment Items and Overview.......................................................................	142
5.1.1 Servicing Adjustment Item List................................................................	142
5.1.2 Required Adjustments ..............................................................................	144
5.2 Using the Adjustment Program .........................................................................	146
5.2.1 TOP Margin Adjustment ..........................................................................	146
5.2.2 First Dot Position Adjustment ..................................................................	146
5.2.3 Head Angular Adjustment ........................................................................	147
5.2.4 Bi-D Adjustment.......................................................................................	148
5.2.5 PF Adjustment ..........................................................................................	148
5.2.6 PF Band Adjustment.................................................................................	150
5.2.7 Bottom Margin Adjustment......................................................................	150
Chapter 6 MAINTENANCE
6.1 Overview ...........................................................................................................	152
6.1.1 Cleaning....................................................................................................	152
6.1.2 Service Maintenance.................................................................................	152
6.1.3 Lubrication................................................................................................	153
Chapter 7 APPENDIX
7.1 Exploded Diagram / Parts List ..........................................................................	159

7

Confidential

C H A P T E R

1

PRODUCT DESCRIPTION

Confidential

CX7300/TX200 series

EPSON Stylus CX7300/CX7400/DX7400/NX200/TX200 series/SX200 series/Stylus CX8300/CX8400/DX8400/NX400/TX400 series/SX400 series Revision C

1.1 Features						Dimensions
							Stylus CX7300/CX8300 series
CHECK	In this chapter, the product names are called as follows:						• Dimensions*1: 450 mm (W) x 340 mm (D) x 179 mm (H)
POINT
							• Weight*2:	CX8300 series: 5.9 kg
		Notation	Product name
								CX7300 series: 5.8 kg
		CX7300 series	Stylus CX7300/CX7400/DX7400
							Stylus TX200/TX400 series
		TX200 series	Stylus NX200/TX200/TX203/TX209/SX200/SX205
							• Dimensions*1: 450 mm (W) x 342 mm (D) x 182 mm (H)
		CX8300 series	Stylus CX8300/CX8400/DX8400
							• Weight*2:	TX400 series: 5.9 kg
		TX400 series	Stylus NX400/TX400/TX405/TX409/SX400/SX405
								TX200 series: 5.8 kg

			*1	:Paper support and stacker are closed. Rubber feet are excluded.
	EPSON Stylus CX7300/TX200/CX8300/TX400 series are color ink-jet printers with
			*2	:Excluding the weight of ink cartridges and power cable.
	scanner function and have the following features.
	The difference in appearance between the two models is LCD; CX8300/TX400 series		CX8300/TX400 series				CX7300/TX200 series
	is equipped with LCD, and CX7300/TX200 series is not equipped with it.

Available Functions

Printer

Printing from a computer or directly printing from a memory card.

Scanner

Scanning from a computer

Copy

Stand alone copy using the scanning and printing functions

Memory card slot

Available as USB memory card slot for PC

Color LCD (CX8300/TX400 series only)

•2.5-inch color TFD LCD (CX8300 series)

•2.5-inch color α-TFT LCD (TX400 series)

High speed & High quality

Maximum print resolution: SMGA 5760 (H) x 1440 (V) dpi

D4-chips Turbo II Printhead achieves higher print speed than ever. (Black: 90 nozzles x 1, Color: 90 nozzles x 1 per color)

Four independent ink cartridges is installed.

Newly developed pigment ink is employed.

Borderless printing on specified EPSON brand paper is available.

Paper Support & Stacker are Closed CX8300/TX400 series

Figure 1-1. External View

PRODUCT DESCRIPTION	Features	9
		Confidential

EPSON Stylus CX7300/CX7400/DX7400/NX200/TX200 series/SX200 series/Stylus CX8300/CX8400/DX8400/NX400/TX400 series/SX400 series Revision C

	1.2	Printing Specifications
	1.2.1	Basic Specifications
			Table 1-1. Printer Specifications
		Item		Specification
	Print method		On-demand ink jet
	Nozzle configuration		Black: 90 nozzles x 1
			Color: 90 nozzles x 3 (Cyan, Magenta, Yellow)
	Print direction		Bi-directional minimum distance printing, Unidirectional printing
			Horizontal x Vertical (dpi)
			• 360 x 120	• 1440 x 720
	Print resolution		• 360 x 360	• 1440 x 1440
			• 360 x 720	• SMGA 5760 x 1440 (2880 x 1440)
			• 720 x 720
			• ESC/P Raster command
	Control code		• ESC/P-R (RGB) command
			• EPSON Remote command
	Input buffer size		64 Kbytes
	Paper feed method		Friction feed, using the ASF (Auto Sheet Feeder)
	Paper path		Top feed, front out
	Paper feed rates		T.B.D. mm/sec (at 25.4 mm feed)
	PF interval		Programmable in 0.01764 mm (1/1440 inch) steps

1.2.2 Ink Cartridge

The product numbers of the EPSON ink cartridges for this printer are shown below.

Table 1-2. Product No. of Ink Cartridges

	Color	EAI		Latin	Euro		CISMEA	Asia
		T0681	(S)*1	T0731H (S)			T0731H (S)
				T0731HN (S)*4	T0711H (S)			T0731HN (S)*4
		T0691	(2S)				T0731HN (S)*4
	Black			T0731 (2S)	T0711	(2S)		T0731 (2S)
		T0881	(3S)*2				T0731 (2S)
				T0731N (2S)*4	T0891 (3S)*4			T0731N (2S)*4
		T0881	(3S)*4				T0731N (2S)*4
				T0901 (3S)*3
		T0692	(3S)		T0712	(3S)
		T0692	(3S)*4	T0732 (3S)			T0732 (3S)	T0732 (3S)
	Cyan				T0712	(3S)*4
		T0882	(4S)*2	T0732N (3S)*4			T0732N (3S)*4	T0732N (3S)*4
					T0892	(4S)*4
		T0882	(4S)*4
		T0693	(3S)		T0713	(3S)
		T0693	(3S)*4	T0733 (3S)			T0733 (3S)	T0733 (3S)
	Magenta				T0713	(3S)*4
		T0883	(4S)*2	T0733N (3S)*4			T0733N (3S)*4	T0733N (3S)*4
					T0893	(4S)*4
		T0883	(4S)*4
		T0694	(3S)		T0714	(3S)
		T0694	(3S)*4	T0734 (3S)			T0734 (3S)	T0734 (3S)
	Yellow				T0714	(3S)*4
		T0884	(4S)*2	T0734N (3S)*4			T0734N (3S)*4	T0734N (3S)*4
					T0894	(4S)*4
		T0884	(4S)*4

Note *1: Available only with CX8300/TX400 series.

*2: Available only with CX7300/TX200/TX400 series.

*3: Available only with CX7300/CX8300 series.

*4: Available only with TX200/TX400 series.

Shelf life

Two years from production date (if unopened), six months after opening package.

Storage Temperature

Table 1-3. Storage Temperature

	Situation	Storage Temperature	Limit
	When stored in individual boxes	-20 oC to 40 oC
		(-4oF to 104oF)
			1 month max. at 40 oC (104oF)
	When installed in main unit	-20 oC to 40 oC
		(-4oF to 104oF)

Dimension

12.7 mm (W) x 68 mm (D) x 47 mm (H)

CAUTION			Do not use expired ink cartridges.
			The ink in the ink cartridge freezes at -16 °C (3.2 oF). It takes
			about three hours under 25 °C (77oF) until the ink thaws and
			becomes usable.

PRODUCT DESCRIPTION

Printing Specifications

10

Confidential

EPSON Stylus CX7300/CX7400/DX7400/NX200/TX200 series/SX200 series/Stylus CX8300/CX8400/DX8400/NX400/TX400 series/SX400 series Revision C

1.2.3 Print Mode

Table 1-4. Print Mode (Color)

	Media	Print Mode	Resolution	Dot Size	Bi-d	Micro	Border-
			(H x V dpi)	(cps)		Weave	less
	• Plain paper	Fast Economy/	360x120	Eco	ON	OFF	N/A
	• Premium Bright	Economy		(400cps)
	White Paper (EAI)	Draft	360x120	Eco	ON	OFF	N/A
	• Premium Bright
				(400cps)
	White Inkjet Paper
				VSD1
	(others)	Normal	360x360		ON	OFF	N/A
				(245cps)
		Fine (360)	360x720	VSD2	ON	ON	OK
				(285cps)
		Fine (720)	720x720	VSD3	ON	ON	OK
				(285cps)
	• Ultra Premium	Photo (1440)	1440x720	VSD3	ON	ON	OK
	Glossy Photo Paper			(285cps)
	(EAI)
		Photo2 (1440)	1440x1440	VSD3	ON	ON	OK
	• Ultra Glossy Photo
				(285cps)
	Paper (others)
		Photo (5760)	2880x1440	VSD3	ON	ON	OK
				(285cps)
	• Photo Paper Glossy	Photo Draft	360x720	VSD1	ON	ON	N/A
	(EAI)
				(245cps)
	• Glossy Photo Paper
	(others)	Photo (720)	720x720	VSD2	ON	ON	OK
	• Premium Photo			(285cps)
	Paper Glossy (EAI)
				VSD3
	• Premium Glossy	Photo (1440)	1440x720		ON	ON	OK
				(285cps)
	Photo Paper (others)
	• Premium Photo	Photo2 (1440)	1440x1440	VSD3	ON	ON	OK
	Paper Semi-Gloss
				(285cps)
	(EAI)
	• Premium Semigloss	Photo (5760)	2880x1440	VSD3	ON	ON	OK
	Photo Paper (other)			(285cps)
	• Premium	Photo (720)	720x720	VSD2	ON	ON	OK
	Presentation Paper			(285cps)
	Matte (EAI)
				VSD3
	• Matte Paper Heavy-	Photo (1440)	1440x720		ON	ON	OK
				(285cps)
	weight (others)

Table 1-4. Print Mode (Color)

	Media	Print Mode	Resolution	Dot Size	Bi-d	Micro	Border-
			(H x V dpi)	(cps)		Weave	less
	• Photo Quality Inkjet	Photo (720)	720x720	VSD2	ON	ON	N/A
	Paper* (others)			(285cps)
		Photo (1440)	1440x720	VSD3	ON	ON	N/A
				(285cps)
		Normal	360x360	VSD1	OFF	OFF	N/A
				(245cps)
	Envelope
		Fine (720)	720x720	VSD3	OFF	ON	N/A
				(285cps)

Note* : Not supported in EAI.

PRODUCT DESCRIPTION

Printing Specifications

11

Confidential

EPSON Stylus CX7300/CX7400/DX7400/NX200/TX200 series/SX200 series/Stylus CX8300/CX8400/DX8400/NX400/TX400 series/SX400 series Revision C

Table 1-5. Print Mode (Monochrome)

	Media	Print Mode	Resolution	Dot Size	Bi-d	Micro	Border-
			(H x V dpi)	(cps)		Weave	less
	• Plain paper	Fast Economy/	360x120	Eco	ON	OFF	N/A
	• Premium Bright	Economy		(400cps)
	White Paper (EAI)	Draft	360x120	Eco	ON	OFF	N/A
	• Premium Ink Jet
				(400cps)
	Plain papers (others)
		Normal	360x360	VSD1	ON	OFF	N/A
				(245cps)
		Fine (360)	360x720	VSD2	ON	ON	N/A
				(285cps)
		Fine (720)	720x720	VSD3	ON	ON	N/A
				(285cps)
	• Ultra Premium	Photo (1440)	1440x720	VSD3	ON	ON	OK
	Glossy Photo Paper			(285cps)
	(EAI)
		Photo2 (1440)	1440x1440	VSD3	ON	ON	OK
	• Ultra Glossy Photo
				(285cps)
	Paper (others)
		Photo (5760)	2880x1440	VSD3	ON	ON	OK
				(285cps)
	• Photo Paper Glossy	Photo Draft	360x720	VSD1	ON	ON	OK
	(EAI)
				(245cps)
	• Glossy Photo Paper
	(others)	Photo (720)	720x720	VSD2	ON	ON	OK
	• Premium Photo			(285cps)
	Paper Glossy (EAI)
				VSD3
	• Premium Glossy	Photo (1440)	1440x720		ON	ON	OK
				(285cps)
	Photo Paper (others)
	• Premium Photo	Photo2 (1440)	1440x1440	VSD3	ON	ON	OK
	Paper Semi-Gloss
				(285cps)
	(EAI)
	• Premium Semigloss	Photo (5760)	2880x1440	VSD3	ON	ON	OK
	Photo Paper (other)			(285cps)
	• Premium	Photo (720)	720x720	VSD2	ON	ON	OK
	Presentation Paper			(285cps)
	Matte (EAI)
				VSD3
	• Matte Paper Heavy-	Photo (1440)	1440x720		ON	ON	OK
				(285cps)
	weight (others)

Table 1-5. Print Mode (Monochrome)

	Media	Print Mode	Resolution	Dot Size	Bi-d	Micro	Border-
			(H x V dpi)	(cps)		Weave	less
	• Photo Quality Inkjet	Photo (720)	720x720	VSD2	ON	ON	N/A
	Paper* (others)			(285cps)
		Photo (1440)	1440x720	VSD3	ON	ON	N/A
				(285cps)
		Normal	360x360	VSD1	OFF	OFF	N/A
				(320cps)
	Envelope
		Fine (720)	360x720	VSD3	OFF	ON	N/A
				(285cps)

Note* : Not supported in EAI.

PRODUCT DESCRIPTION

Printing Specifications

12

Confidential

EPSON Stylus CX7300/CX7400/DX7400/NX200/TX200 series/SX200 series/Stylus CX8300/CX8400/DX8400/NX400/TX400 series/SX400 series Revision C

1.2.4 Supported Paper

The table below lists the paper type and sizes supported by the printer. The supported paper type and sizes vary depending on destinations (between EAI, EUR, and Asia).

Table 1-6. Supported Paper

Paper Name

Paper Size

Thickness

Weight

EAI

EUR

Asia

(mm)

P*1

B*2

P*1

B*2

P*1

B*2

Legal

215.9 x 355.6 mm (8.5”x14”)

Y

-

Y

-

Y

-

Letter

215.9 x 279.4 mm (8.5”x11”)

Y

-

Y

-

Y

-

A4

210 x 297 mm (8.3”x11.7”)

Y

-

Y

-

Y

-

B5

182 x 257 mm (7.2”x10.1”)

64-90 g/m2

-

-

Y

-

Y

-

Plain paper

0.08-0.11

A5

148 x 210 mm (5.8”x8.3”)

-

-

Y

-

Y

-

(17-24 lb.)

Half Letter

139.7 x 215.9 mm (5.5"x8.5”)

Y

-

-

-

-

-

A6

105 x 148 mm (4.2”x5.8”)

Y

-

Y

-

Y

-

User Defined

89 x 127329 x 1117.6 mm

Y

-

Y

-

Y

-

(3.56”x 5.08” - 13.16”x44.7”)

Premium Inkjet Plain Paper

A4

210 x 297 mm (8.3”x11.7”)

0.11

80 g/m2

-

-

Y

-

Y

-

(21 lb.)

Letter

215.9 x 279.4 mm (8.5”x11”)

0.11

90 g/m2

Y

-

-

-

-

-

Premium Bright White Paper (EAI)

(24 lb.)

Bright White Inkjet Paper (Euro, Asia)

A4

210 x 297 mm (8.3”x11.7”)

0.13

92.5 g/m2

-

-

Y

-

Y

-

(25 lb.)

Letter

215.9 x 279.4 mm (8.5”x11”)

Y

Y

-

-

-

-

Ultra Premium Glossy Photo Paper (EAI)

A4

210 x 297 mm (8.3”x11.7”)

290 g/m2

-

-

Y

Y

Y

Y

8” x 10”

203.2 x 254 mm

0.30

Y

Y

-

-

-

-

Ultra Glossy Photo Paper (Euro, Asia)

(77 lb.)

5” x 7”

127 x 178 mm

Y

Y

Y

Y

-

-

4” x 6”

101.6 x 152.4 mm

Y

Y

Y

Y

Y

Y

Letter

215.9 x 279.4 mm (8.5”x11”)

Y

Y

-

-

-

-

A4

210 x 297 mm (8.3”x11.7”)

Y

Y

Y

Y

Y

Y

Premium Photo Paper Glossy (EAI)

8” x 10”

203.2 x 254 mm

0.27

255 g/m2

Y

Y

-

-

-

-

Premium Glossy Photo Paper (Euro, Asia)

5” x 7”

127 x 178 mm

(68 lb.)

Y

Y

Y

Y

Y

Y

4" x 6"

101.6 x 152.4 mm

Y

Y

Y

Y

Y

Y

16:9 wide

101.6 x 180.6 mm

Y

Y

Y

Y

Y

Y

PRODUCT DESCRIPTION Printing Specifications 13

Confidential

EPSON Stylus CX7300/CX7400/DX7400/NX200/TX200 series/SX200 series/Stylus CX8300/CX8400/DX8400/NX400/TX400 series/SX400 series Revision C

Table 1-6. Supported Paper

Paper Name

Paper Size

Thickness

Weight

EAI

EUR

Asia

(mm)

P*1

B*2

P*1

B*2

P*1

B*2

Letter

215.9 x 279.4 mm (8.5”x11”)

Y

Y

-

-

-

-

Photo Paper Glossy (EAI)

A4

210 x 297 mm (8.3”x11.7”)

0.25

258 g/m2

Y

Y

Y

Y

Y

Y

Glossy Photo Paper (Euro, Asia)

5” x 7”

127 x 178 mm

(68 lb.)

-

-

Y

Y

-

-

4” x 6”

101.6 x 152.4 mm

Y

Y

Y

Y

Y

Y

Premium Photo Paper Semi-Gloss (EAI)

Letter

215.9 x 279.4 mm (8.5”x11”)

250 g/m2

Y

Y

-

-

-

-

A4

210 x 297 mm (8.3”x11.7”)

0.27

-

-

Y

Y

Y

Y

Premium Semigloss Photo Paper (Euro, Asia)

(66 lb.)

4” x 6”

101.6 x 152.4 mm

Y

Y

Y

Y

Y

Y

Premium Presentation Paper Matte (EAI)

Letter

215.9 x 279.4 mm (8.5”x11”)

167 g/m2

Y

Y

-

-

-

-

A4

210 x 297 mm (8.3”x11.7”)

0.23

-

-

Y

Y

Y

Y

Matte Paper-Heavyweight (Euro, Asia)

(44 lb.)

8” x 10”

203.2 x 254 mm

Y

Y

-

-

-

-

Photo Quality Inkjet Paper

A4

210 x 297 mm (8.3”x11.7”)

0.13

102 g/m2

-

-

Y

-

Y

-

(27 lb.)

#10

104.8 x 241.3 mm (4.125”x9.5”)

75-100 g/m2

Y

-

Y

-

Y

-

Envelopes

#DL

110 x 220 mm

-

-

-

Y

-

Y

-

(20-27 lb.)

#C6

114 x 162 mm

-

-

Y

-

Y

-

A4

210 x 297 mm (8.3”x11.7”)

190 g/m2

-

-

Y

Y

Y

-

Photo Paper*3

5” x 7”

127 x 178 mm

0.24

-

-

Y

Y

-

-

(51 lb.)

4” x 6”

101.6 x 152.4 mm

-

-

Y

Y

Y

Y

Note *1: “Y” in the “P” column stands for “the paper type/size is Supported”. *2: “Y” in the “B” column stands for “Borderless printing is available”. *3: CX7300/CX8300 series is not supported.

CAUTION		Make sure the paper is not wrinkled, fluffed, torn, or folded.
	The curve of paper must be 5 mm or below.
	When printing on an envelope, be sure the flap is folded neatly.
	Do not use the adhesive envelopes.
		Do not use double envelopes and cellophane window envelopes.

PRODUCT DESCRIPTION

Printing Specifications

14

Confidential

EPSON Stylus CX7300/CX7400/DX7400/NX200/TX200 series/SX200 series/Stylus CX8300/CX8400/DX8400/NX400/TX400 series/SX400 series Revision C

1.2.5		Printing Area
The printing area for this printer is shown below.
			Table 1-7. Printing Area (Margins)
	Print Mode		Paper Size		Margin
				Left	Right	Top	Bottom
	Standard print		Any size	3 mm	3 mm	3 mm	3 mm
			Envelope	5 mm	5 mm	3 mm	20 mm
	Borderless		A4/Letter to			2.96 mm*	3.39 mm*
			5” x 7” / Hi-Vision	2.54 mm*	2.54 mm*
	print
			4” x 6”			2.82 mm*	3.39 mm*
Note * :		The margins for Borderless print are margins that bleed off the edges of paper.

Cut Sheet (Standard)		Cut Sheet (Borderless)			Envelope
LM	RM	LM	RM	LM	RM
	TM		TM		TM
					Print Area
	Print Area		Print Area
	BM				BM

Paper

SIze

Paper Size

BM

Paper Feed Direction

Figure 1-2. Printing Area

1.3 Scanner Specifications

	Table 1-8. Basic Specifications
	Item	Specification
	Scanner type	Flatbed, color
	Scanning method	Moving carriage, stationary document
	Home position	The front right corner
	Photoelectric device	CIS
	Light source	LED
	Maximum document sizes	A4 or US letter
	Scanning range	8.5" x 11.7" (216 mm x 297 mm)
	Maximum resolution	Main scan: 1200 dpi
		Sub scan: 2400 dpi
	Maximum effective pixels	10,200 x 14,040 pixels (CIS optical resolution x Microstep drive)
	Pixel depth	16 bit per pixel (input) and 8 bit per pixel (output).

1.3.1 Scanning Range

Table 1-9. Scanning Range

	RL (read length)	RW (read width)	OLM (left margin)	OTM (top margin)
	216 mm	297 mm	1.5 mm	1.5 mm

	RL	OTM
Scan area	a
Scan bed			RW
Original
(facedown)
			OLM

Scanning starting position

Home position

Figure 1-3. Scanning Range

PRODUCT DESCRIPTION

Scanner Specifications

15

Confidential

EPSON Stylus CX7300/CX7400/DX7400/NX200/TX200 series/SX200 series/Stylus CX8300/CX8400/DX8400/NX400/TX400 series/SX400 series Revision C

1.4	General Specifications
1.4.1	Electrical Specifications
		Table 1-10. Primary Power Specifications
		Item		100-120 V model		220-240 V model
Rated power supply voltage				100 to 120 VAC		220 to 240 VAC
Input voltage range				90 to 132 VAC		198 to 264 VAC
Rated current (Max. rated current)				0.6 A (1.0 A)		0.3 A (0.5 A)
Rated frequency				50 to 60 Hz
Input frequency range				49.5 to 60.5 Hz
Insulation resistance				3000 V (for one minute)
Energy conservation				International Energy Star Program compliant
		Copy		Approx. 12 W		Approx. 12 W
		(Printing pattern: ISO/IEC24712)
Power
		Ready		Approx. 5.0 W		Approx. 5.0 W
consumption
		Sleep		Approx. 2.5 W		Approx. 3 W
		Off		Approx. 0.2W		Approx. 0.3W

Note 1: If the printer or scanner is not operated for more than three minutes, the printer goes into the power save mode within two minutes.

2:When no operation is made with the control panel for more than 13 minutes, the panel goes to the power save mode within two minutes.

1.4.2 Environmental Conditions

Table 1-11. Environmental Conditions

	Condition	Temperature*1	Humidity*1,2	Shock	Vibration
	Operating	10 to 35°C	20 to 80%	1G	0.15G,
		(50 to 95°F)		(1 msec or less)	10 to 55Hz
	Storage	-20 to 40°C*3	5 to 85%	2G	0.50G,
	(unpacked)	(-4°F to 104°F)		(2 msec or less)	10 to 55Hz

Note *1: The combined Temperature and Humidity conditions must be within the blue-shaded range in Fig.1-4.

*2: No condensation

*3: Must be less than 1 month at 40°C.

	90
	80
	70
	60
Humidity (%)	50
	40
	30
	20
			27/80
	10/50	20/68	30/86	35/95	40/104

Temperature (°C/°F)

Figure 1-4. Temperature/Humidity Range

CAUTION	When returning the repaired printer to the customer, make sure
	the Printhead is covered with the cap and the ink cartridge is
	installed.

If the Printhead is not covered with the cap when the printer is off, turn on the printer with the ink cartridge installed, make sure the Printhead is covered with the cap, and then turn the printer off.

PRODUCT DESCRIPTION

General Specifications

16

Confidential

EPSON Stylus CX7300/CX7400/DX7400/NX200/TX200 series/SX200 series/Stylus CX8300/CX8400/DX8400/NX400/TX400 series/SX400 series Revision C

1.4.3 Durability

Total print life: Black 10,000 pages (A4, 3.5% duty),

		Color 10,000 pages (A4, ISO FDC24712),
		or five years which ever comes first
	Printhead:	Five billions shots (per nozzle) or five years which ever comes
		first
	Scanner carriage: 30,000 cycles of carriage movement

1.4.4 Acoustic Noise

T.B.D. dB

(when printing from PC, on Premium Glossy Photo Paper, in highest quality)

T.B.D. dB (when scanning, default setting)

1.4.5 Safety Approvals (Safety standards/EMI)

USA	UL60950-1
	FCC Part15 Subpart B Class B
Canada	CSA No.60950-1
	CAN/CSA-CEI/IEC CISPR 22 Class B
Mexico	NOM-019-SCFI-1998
Taiwan	CNS13438 Class B
	CNS14336
EU	EN60950-1
	EN55022 Class B
	EN61000-3-2, EN61000-3-3
	EN55024
Germany	EN60950-1
Russia	GOST-R (IEC60950-1, CISPR 22)
Singapore	IEC60950-1
Korea	K60950-1
	KN22 Class B
China*1	KN61000-4-2/-3/-4/-5/-6/-11
	GB4943
Hong Kong*2	GB9254 Class B, GB17625.1
	IEC60950-1
Argentina	IEC60950-1
Australia	AS/NZS CISPR22 Class B

Note *1: CX7300/TX400 series is not supported. *2: CX7300 series is not supported.

1.5 Interface

This printer has USB interface and memory card slots of the following specifications.

1.5.1 USB Interface

The table below describes the specifications of the two USB ports; USB device port for connecting with a host such as a computer, and the USB host port for connecting with an external devices such as a DSC (digital still camera).

Table 1-12. USB Interface Specifications

Item	USB Device port		USB Host port*
	• Universal Serial Bus		• Universal Serial Bus
Compatible standards	Specifications Revision 2.0		Specifications Revision 2.0
	• Universal Serial Bus Device		• Universal Serial Bus Mass
	Class Definition for Printing		Storage Class Bulk-Only
	Devices Version 1.1		Transport Revision 1.0
Transfer rate	480 Mbps (High Speed)		12 Mbps (Full Speed)
Data format		NRZI
Compatible connector	USB Series B		USB Series A
Max. cable length	2 [m] or less

Note* : External devices that can be connected to the USB device port are:

DSC compliant with the USB Direct Print Protocol specification Rev 1.0 DSC compliant with the CIPA DC-001-2003 (PictBridge) specifications

Table 1-13. Device ID

When IEEE 1284.4 is Enabled	When IEEE 1284.4 is Disabled
@EJL<SP>ID<CR><LF>	@EJL<SP>ID<CR><LF>
MFG:EPSON;	MFG:EPSON;
CMD:ESCPL2,BDC,D4,D4PX,ESCPR1;	CMD:ESCPL2,BDC;ESCPR1;
MDL:Model Name;	MDL:Model Name;
CLS:PRINTER;	CLS:PRINTER;
DES:EPSON<SP>Model Name;	DES:EPSON<SP>Model Name;

The “Model Name” is replaced as shown in the following table.

Table 1-14. Model Names Indicated in the Device ID

Destination	North America	Euro	Asia/Pacific
CX7300 series	Stylus CX7400	Stylus DX7400	Stylus CX7300
CX8300 series	Stylus CX8400	Stylus DX8400	Stylus CX8300
TX200 series	TBD	TBD	TBD
TX400 series	TBD	TBD	TBD

PRODUCT DESCRIPTION

Interface

17

Confidential

EPSON Stylus CX7300/CX7400/DX7400/NX200/TX200 series/SX200 series/Stylus CX8300/CX8400/DX8400/NX400/TX400 series/SX400 series Revision C

1.5.2 Memory Card Slots

CAUTION In the case of TX200/TX400 series; if you insert a Memory Stick DUO to the Memory Card Slot without using the adapter, make

sure to turn off the printer first, then remove the card using tweezers.

Table 1-15. List of Supported Memory Card

Priority	Slot	Compatible memory card	Standard	Max. capacity	Remarks
	Memory Stick/	Memory Stick	“MemoryStick Standard” Format Specification Ver.1.42-00 compatible	128MB	Includes versions with memory select function
	Memory Stick
		MagicGate Memory Stick		128MB	Copy protection function is not supported
	PRO
		MagicGate Memory Stick Duo			An adapter should be used
		Memory Stick PRO	Memory Stick PRO Format Specifications-without security specifications Ver.1.02-00	4GB	Copy protection function is not supported
			compatible
		Memory Stick Duo	MemoryStick Duo Format Specification Ver.1.11-00 compatible		The Memory Stick Duo adapter should be
					used
		Memory Stick Pro Duo	MemoryStick PRO Duo Format Specification Ver.1.02-00 compatible		The Memory Stick Duo adapter should be
					used.
1		Memory Stick micro	Memory Stick Micro Format Specification Ver.1.02-00 compatible		The Memory Stick adapter for standard size
					should be used.
	SD/MMC	SD (Security Digital)	SD Memory Card Specifications / PART1. Physical Layer Specification Ver. 2.0 compatible	2GB
		miniSD/microSD			The SD adapter should be used
		SDHC			Speed Class is not supported
		miniSDHC/microSDHC		8GB	The SD adapter should be used
					Speed Class is not supported
		MultiMediaCard	MultiMediaCard Standard Ver. 4.1 compatible	64MB/4GB	Only MultiMediaCard Plus supports 4GB
		MultiMediaCard Plus
	xD-Picture card	xD-Picture card	xD-Picture Card Specification Ver.1.20 compatible	2GB	Type M/H supported
	CF Type II	Compact Flash	CF+ and CompactFlash Specification Revision 3.0 compatible (CX7300/CX8300 series)	4GB	True-IDE compatible memory card only
2			CF+ and CompactFlash Specification Revision 4.1 compatible (TX200/TX400 series)	32GB
		Microdrive

Note: • Memory Stick/PRO, SD/MMC and xD-Picture Card shares the same slot.

•When cards are inserted in the two slots at once, the slot which will be accessed first is determined according to the priority shown in the table.

•To select a card that has been inserted in a non-active slot, first remove the card in the active slot.

•In memory card direct printing mode, the image files in the active slot are valid and have assigned frame numbers. The number of images will not change if a card is inserted in another nonselected slot.

•When the card inserted in the slot is accessed from the PC, only one drive is displayed at a time as a removable disk* and only the card that is in the active slot can be accessed via the removable disk. A card that has been inserted into a non-selected slot cannot be accessed.

(This is for Windows. For Macintosh, the card in the active slot will be mounted on the desktop.)

•Does not support 5V type of memory cards.

•When a memory card is being accessed, do not touch the memory card.

•For detailed information on the supported file system and formatting the memory card, refer to “1.7.2 Memory Card Direct Print Function (p.31)”.

PRODUCT DESCRIPTION

Interface

18

Confidential

EPSON Stylus CX7300/CX7400/DX7400/NX200/TX200 series/SX200 series/Stylus CX8300/CX8400/DX8400/NX400/TX400 series/SX400 series Revision C

1.6 Control Panel

1.6.1 Operation Buttons & LEDs

CX8300/TX400 series (LCD-equipped model)

Table 1-16. CX8300/TX400 series Buttons & LEDs		LCD
Button/LED	Function

	Power	Turns the power ON/OFF.
	Start	Starts printing.
		• Stops operation and displays the menu screen.			Memory Card button
		• Stops printing and ejects paper.
	Stop/Clear
		• Returns the print settings in the current mode to their default
		and displays the Top screen. (Returns to the previous screen	Copy button		Photo button
		during printing maintaining the current settings)
	Setup	Goes to the Setup mode that provides maintenance menu (head			Cross key and OK button
		cleaning, head alignment, etc.) and various setting menu.
	Display/Crop	• Goes to the zoom setting screen for the selected image.	- button		+ button
		• Changes the image preview layout on the LCD.
Button	Menu	Goes to the print setting menu screen.	Menu button		Back button
	OK	Accepts the changed settings
	Back	Cancels the previous operation.
	Cross Key	Selects a menu item or a setting value.
	(Up/Down/Left/Right)		Setup button		Display/Crop button
	+	Sets the number of copies.
	-				Start button
	Copy	Goes to the stand alone Copy mode.	Power LED
	Memory Card	Goes to the memory card direct print mode.	Power button		Stop/Clear button
	Photo	Goes to the special mode that provides Reprint/Restore Photos
		function.
		• Flashes at power ON/OFF.
	Power (Green)	• Flashes during some sequence is in progress.
		• Flashes when an fatal error occurs.	Note :	The Card Access LED is provided near the memory card slot.
LED		• Lights when the status is other than above. (i.e. when in
		stand-by / in setting operation using the control panel)	Figure 1-5. CX8300/TX400 series Control Panel
	Card Access	• Lights when a memory card is inserted.
	(Green)	• Flashes when a memory card is being identified or accessed.

PRODUCT DESCRIPTION

Control Panel

19

Confidential

EPSON Stylus CX7300/CX7400/DX7400/NX200/TX200 series/SX200 series/Stylus CX8300/CX8400/DX8400/NX400/TX400 series/SX400 series Revision C

CX7300/TX200 series (LCD-non-equipped model)

The printer has the following buttons and LEDs on the control panel.

Table 1-17. CX7300/TX200 series Operation Buttons & LEDs

		Button/LED	Function
		Power	Turns the power ON/OFF.
			[When printing]
			Stops printing, cancels the job, or cancels the error.
		Stop / Maintenance	[When not printing]
			Performs maintenance such as head cleaning and Ink
			replacement. Clears the settings.
	Button	Print Index Sheet	Prints an index sheet.
		Print from Index Sheet	Starts reading an index sheet and prints photos stored in
			memory card.
		Copies	Sets a number of copies.
		Paper Type	Selects paper type and size.
		Start B&W	Starts B&W copying.
		Start Color	Starts color copying.
			• Flashes at power ON/OFF.
			• Flashes during some sequence is in progress.
		Power (Green)	• Flashes when maintenance is performed or a fatal error
			occurs.
			• Lights when the printer status is other than above.
			(standby / while the control panel is used for setting)
	LED*	Error (Orange)	Flashes when a paperrelated error occurs.
		Ink (Orange)	Flashes when an ink-related error occurs.
		7 Segments	Displays the number of copies, status, or error code.
		Paper LED 1 (Green)	Lights while plain paper is selected.
		Paper LED 2 (Green)	Lights while photo paper is selected.
		Card Access (Green)	• Lights while a memory card is inserted in the slot.
			• Flashes while a memory card is accessed.

Note * : See Table 1-19 on page 22 and Table 1-20 on page 25 for details on the button functions, and Table 1-21 on page 26 for details on the LED functions.

Power button

Stop / Maintenance button Error LED Ink LED

Print Index Sheet button

Print from Index Sheet

Copies button

Paper LED1/2 Paper type button

Start B&W button

Start Color button

Power LED

7 Segment LED

Note : The Card Access LED is provided near the memory card slot.

Figure 1-6. CX7300/TX200 series Control Panel

PRODUCT DESCRIPTION	Control Panel	20
		Confidential

EPSON Stylus CX7300/CX7400/DX7400/NX200/TX200 series/SX200 series/Stylus CX8300/CX8400/DX8400/NX400/TX400 series/SX400 series Revision C

1.6.2 Control Panel Functions in Each Mode

1.6.2.1 Control Panel Functions for CX8300/TX400 series

The table below shows the print setting menu items for each mode and their default, and when the settings are saved or returned to their default. Explanations on detailed control panel functions of the CX8300/TX400 series are omitted here, because the LCD displays the detailed instruction.

Table 1-18. Timing of Saving or Initializing Control Panel Settings

Mode		Print Setting	Default Value	Saving Timing	Initializing Timing*
Copy		Copy Type	Color	When the Start button is pressed	When the Stop/Clear button is pressed
		Layout	With Border
		Number of copies	1
		Zoom	Actual
		Paper Type	Plain Paper
		Paper Size	A4, Letter (for EAI)
		Quality	Standard
		Density	±0
		Expansion	Standard
Memory Card		Paper Type	Prem. Glossy	When the Start button is pressed	When the Stop/Clear button is pressed
		Paper Size	4x6 inch
		Layout	Borderless
		Quality	Standard
		Expansion	Standard
		Date	None
		Bidirectional	On
		Select (Print Index Sheet setting)	All Photos
		Information (Print Index Sheet setting) (EAI only)	File Name
Photo		Paper Type	Prem. Glossy	When the Start button is pressed	When the Stop/Clear button is pressed
		Paper Size	4x6 inch
		Layout	Borderless
		Expansion	Standard
		Color Restoration	Off
Camera Direct		Paper type	Prem. Glossy	When the settings are made in the PictBridge Setup	When the Stop/Clear button is pressed while
		Paper size	4x6 inch	of the Setup menu.	making the settings.
		Layout	Borderless
		Quality	Standard
		Expansion	Standard
		Date	None
		Bidirectional	On

Note * : All the settings except “LCD Brightness” of Setup menu returns to their default when the “Restore Default Settings” of the Setup menu is executed by the OK button.

PRODUCT DESCRIPTION

Control Panel

21

Confidential

EPSON Stylus CX7300/CX7400/DX7400/NX200/TX200 series/SX200 series/Stylus CX8300/CX8400/DX8400/NX400/TX400 series/SX400 series Revision C

1.6.2.2 Control Panel and LED Functions for CX7300/TX200 series

This section explains the detailed functions of the operation buttons and LEDs of the CX7300/TX200 series that are not equipped with an LCD.

Table 1-19. CX7300/TX200 series Buttons & LEDs Functions

		Printer			Functions
	Button				During DPOF			Button Operation Disabled Cases
		Status		During Normal Printing			During Camera Direct Printing
					Printing
	Power	Normal	Turns the power OFF.		Same as the left column.	Same as the left column.		None
			(Turns the power ON when the power is OFF.)
		Error
	Stop /Maintenance	Normal	Stops printing and cancels the print/copy job.		Same as the left column.	Same as the left column.		• During power ON / OFF operation
			At this time, the panel settings are not initialized but returned					•	During scanner operation from PC
			to the previous settings.					•	During head cleaning
								•	During ink cartridge replacement
		Error	•	Cancels the error, stops printing, cancels the job, or ejects	Same as the left column.	Same as on the left except the cases below.
				paper.		•	When a camera direct error (camera
			[When an ink-related error occurs]*				recognition is failed) occurs, cancels the
			•	Executes an ink cartridge replacement sequence when an			error and returns to the status before the
				ink end error, no ink cartridge error, or ink cartridge error			error occurs.
				occurs.		•	When the camera direct error caused by
			•	Moves the carriage to the ink check position when ink end			the camera connected before the printer is
				error or no ink cartridge error occurs.			powered on, returns to stand-by status
							(initial status at power-on)
	Stop /Maintenance	Normal	Runs a head cleaning.		Same as the left column.	Same as the left column.		•	When an ink-out error is occurring
	(when pressed for 3							•	When a no ink cartridge error or ink
		Error	[When a no paper error, memory card error, or index sheet		Same as the left column.	•	Same as the left column in the case of
	seconds or more)								cartridge error is occurring
			error occurred]				paper-out error.
								•	When an error other than above or
			Cancels the error and retained print job, and starts head			•	When a camera direct error (camera
									the camera direct error is occurring
			cleaning.				recognition is failed) occurs, cancels the
								•	During printing
							error and returns to the status before the
								•	During scanner operation
							error occurs, and then runs a head cleaning.
								•	During head cleaning
						•	When the camera direct error caused by the
								•	During ink cartridge replacement
							camera connected before the printer is
							powered on, returns to stand-by status	•	When printing is being stopped or a
							(initial status at power-on), and then runs a		print job is being canceled
							head cleaning.

Note * : If the carriage is at an ink check position, the carriage moves to ink check positions for another color in the order of cyan, magenta, yellow, and black (the colors not requiring ink check will be skipped). After ink check is completed, the carriage moves to the ink replacement position. If the carriage is at the ink cartridge replacement position, it moves to the home position.

		Continued on next page
PRODUCT DESCRIPTION	Control Panel	22

Confidential

EPSON Stylus CX7300/CX7400/DX7400/NX200/TX200 series/SX200 series/Stylus CX8300/CX8400/DX8400/NX400/TX400 series/SX400 series Revision C

Table 1-19. CX7300/TX200 series Buttons & LEDs Functions

	Printer				Functions
Button					During DPOF		Button Operation Disabled Cases
	Status		During Normal Printing			During Camera Direct Printing
					Printing
Print Index Sheet	Normal	Starts printing an index sheet.*			Disabled	Disabled	•	During printing
		The paper size / paper type are changed to A4 / plain paper					•	During scanner operation
		automatically. Initializes the panel settings and turns off the 7-					•	During head cleaning
		segment LED.					•	During ink cartridge replacement
	Error	•	Displays a memory card error when no memory card or a		Disabled	When a camera direct error is occurring,	• When an error except memory card
								error, index sheet error is occurring
			non-supported formatted memory card is detected, or when			cancels the error and returns to the index sheet
							•	When print data is spooled
			no image data is found in the memory card.			print process.
		•	When an index sheet error is occurring, cancels the error				•	When printing is being stopped or a
			and retrys to print the index sheet.					print job is being canceled
		•	When a paper-out error is occurring, performs paper feed				•	When the button is pressed two or
			operation. If the paper is fed successfully, cancels the error					more times after a memory card error
			and prints the index sheet.					occurred.
		•	When a paper jam error is occurring, performs paper
			ejection operation. If the paper is ejected successfully,
			cancels the error and prints the index sheet.
Print from Index	Normal	Reads an index sheet and starts printing images.			Disabled	Disabled	•	During printing
Sheet	Error	Same as the [Print Index Sheet] button other than the cases			Disabled	When a camera direct error is occurring,	•	During scanner operation
							•	During head cleaning
		below.				cancels the error and starts reading the index
							•	During ink cartridge replacement
		•	When the index sheet cannot be read normally, cancels the			sheet.
							•	When print data is spooled
			print job and displays an index sheet error.
							•	When printing is being stopped or a
		•	When the button is pressed after an index sheet error is
								print job is being canceled
			displayed, cancels the error display and resumes the print
							•	When the button is pressed two or
			job.
								more times after a memory card error
								occurred
Copies	Normal	Sets the number of copies.			Cancels the DPOF mode	Disabled	• During printing
		Default value is 1 copy.			and returns to standby		•	During scanner operation
		1 to 9 sheets and “≡” (20 sheets continuously) can be set.			mode.		•	During head cleaning
		Saves the set value when starting copying. Does not save			The set number of copies		•	During ink cartridge replacement
		when the power is Off. Returns the setting to the default when			is returned to the default,		•	When an error is occurring
		the power is turned Off or the mode is changed. The 7-			and the paper type and		•	When print data is spooled
		segment LED displays the set number of copies and decreases			size settings are returned
							•	When printing is being stopped or a
		the number each time a copy is made. When the copy job is			to the previous ones.
								print job is being canceled
		finished, the number returns to the set value.
	Error	Disabled			Disabled	When a camera direct error is occurring,
						cancels the error, and goes to the standby
						mode. The set number of copies is returned to
						the default, and the paper type and size
						settings are returned to the previous ones.
Note * : After printing an index sheet, the paper type and size settings are returned to the previous ones.								Continued on next page
PRODUCT DESCRIPTION				Control Panel				23

Confidential

EPSON Stylus CX7300/CX7400/DX7400/NX200/TX200 series/SX200 series/Stylus CX8300/CX8400/DX8400/NX400/TX400 series/SX400 series Revision C

Table 1-19. CX7300/TX200 series Buttons & LEDs Functions

	Printer				Functions
Button					During DPOF		Button Operation Disabled Cases
	Status		During Normal Printing			During Camera Direct Printing
					Printing
Paper Type	Normal	Sets the paper size / paper type.			Same as the left column.	Same as the left column.	•	During printing
		Default is A4 (Letter for EAI), Plain Paper					•	During scanner operation
		Saves the settings when the power is turned Off by the Power					•	During head cleaning
		button, the modes is changed, or copying is started. Does not					•	During ink cartridge replacement
		save when the power plug is disconnected.					•	When an error is occurring
	Error	Disabled			Disabled	When a camera direct error is occurring,	•	When print data is spooled
							•	When printing is being stopped or a
						cancels the error, and goes to the standby
						mode. The set number of copies is returned to		print job is being canceled
						the default, and the paper type and size
						settings are returned to the previous ones.
Start B&W	Normal	Starts copying in B&W mode.			Disabled	Disabled*	•	During printing
		Saves the number of copies and paper type and size settings					•	During scanner operation
		when starting copying and displays the saved settings after the					•	During head cleaning
		copying is complete.					•	During ink cartridge replacement
	Error	•	When a paper-out error is occurring, performs paper feed		Same as the left column.	Same as the left column.	•	When an ink error is occurring
							•	When print data is spooled
			operation. If the paper is fed successfully, cancels the error
			and starts the copy job.				•	When printing is being stopped or a
		•	When a paper jam error is occurring, performs paper					print job is being canceled
			ejection operation. If the paper is ejected successfully,
			cancels the error starts the copy job.
Start B&W	Normal	Starts autofit copying in B&W mode.			Disabled	Disabled*
(when pressed for 3		Saves the number of copies and paper type and size settings
seconds or more)		when starting copying and displays the saved settings after the
		copying is complete.
	Error	•	When a paper-out error is occurring, performs paper feed		Same as the left column.	Same as the left column.
			operation. If the paper is fed successfully, cancels the error
			and starts the copy job.
		•	When a paper jam error is occurring, performs paper
			ejection operation. If the paper is ejected successfully,
			cancels the error starts the copy job.
Stop /Maintenance	Normal	Starts monochrome draft copy. (A4 plain paper only)			Disabled	Disabled*	•	During scanner operation
+ Start B&W		Saves the number of copies and paper type and size settings					•	During head cleaning
		when starting copying and displays the saved settings after the					•	During ink cartridge replacement
		copying is complete.					•	When printing is being stopped or a
	Error	Disabled			Disabled	Disabled		print job is being canceled
							•	When an error is occurring
Note * : When in camera direct mode, starts printing according to requirements from the camera.
								Continued on next page
PRODUCT DESCRIPTION				Control Panel				24

Confidential

EPSON Stylus CX7300/CX7400/DX7400/NX200/TX200 series/SX200 series/Stylus CX8300/CX8400/DX8400/NX400/TX400 series/SX400 series Revision C

Table 1-19. CX7300/TX200 series Buttons & LEDs Functions

	Printer			Functions
Button				During DPOF		Button Operation Disabled Cases
	Status		During Normal Printing		During Camera Direct Printing
				Printing
Start Color	Normal	Starts copying in color mode.		Disabled	Disabled*	•	During printing
		Saves the number of copies and paper type and size settings				•	During scanner operation
		when starting copying and displays the saved settings after the				•	During head cleaning
		copying is complete.				•	During ink cartridge replacement
	Error	•	When a paper-out error is occurring, performs paper feed	Same as the left column.	Same as the left column.	•	When an ink error is occurring
						•	When print data is spooled
			operation. If the paper is fed successfully, cancels the error
			and starts the copy job.			•	When printing is being stopped or a
		•	When a paper jam error is occurring, performs paper				print job is being canceled.
			ejection operation. If the paper is ejected successfully,
			cancels the error starts the copy job.
Start Color	Normal	Starts autofit copying in color mode.		Starts printing	Disabled*
(when pressed for 3		Saves the number of copies and paper type and size settings		according to the
seconds or more)		when starting copying and displays the saved settings after the		DPOF setting.
		copying is complete.
	Error	•	When a paper-out error is occurring, performs paper feed	Same as the left column.	Same as the left column.
			operation. If the paper is fed successfully, cancels the error
			and starts the copy job.
		•	When a paper jam error is occurring, performs paper
			ejection operation. If the paper is ejected successfully,
			cancels the error starts the copy job.
Stop /Maintenance	Normal	Starts color draft copy. (A4 plain paper only)		Disabled	Disabled*	•	During scanner operation
+ Start Color		Saves the number of copies and paper type and size settings				•	During head cleaning
		when starting copying and displays the saved settings after the				•	During ink cartridge replacement
		copying is complete.				•	When printing is being stopped or a
	Error	Disabled		Disabled	Disabled		print job is being canceled
						•	When an error is occurring

Note * : When in camera direct mode, starts printing according to requirements from the camera.

Table 1-20. CX7300/TX200 series Special Button Operations for Maintenance Functions

Button		Function		Remarks
Stop / Maintenance & Power	Prints a nozzle check pattern.		•	The nozzle check pattern printed by the printer is shown in Figure 1-11.
(Power On)	After printing the pattern, returns to the standby state of normal print mode.		•	If the Stop / Maintenance button is pressed while printing a nozzle check pattern, stops
				printing, eject paper, and turns the power OFF.
Copies & Power	Enters mechanism adjustment mode and prints a Head Alignment pattern.		•	See “1.7.5.8 Head Alignment (p.40)” for details on Bi-D adjustment.
(Power On)	After printing the pattern, goes to the adjustment value input mode.
PRODUCT DESCRIPTION		Control Panel		25

Confidential

EPSON Stylus CX7300/CX7400/DX7400/NX200/TX200 series/SX200 series/Stylus CX8300/CX8400/DX8400/NX400/TX400 series/SX400 series Revision C

Table 1-21. CX7300/TX200 series LED Functions

Printer Status				LED				Pri-
								ority
	Power	Error	Ink		7 Segments	Paper 1/2	Card Access
Power OFF (processing)	High-speed flashing	OFF	OFF		OFF	OFF	--	1
Fatal error (system error)	High-speed flashing	High-speed flashing	High-speed flashing		High-speed flashing of	High-speed flashing	--	2
					“E”	(selected side)
Fatal error (mechanical error)	Flashing	Flashing	Flashing		Flashing of “E”	Flashing	--	3
						(selected side)
Maintenance request	Flashing	ON	ON		Flashing of “E”	Flashing	--	4
						(selected side)
Power ON (initializing)	Flashing	--	--		--	--	--	5
Reset request / Stop request / Job cancel request	ON for 1 second	ON for 1 second	ON for 1 second		ON for 1 second	ON for 1 second	--	6
						(selected side)
Paper jam error	--	Flashing	OFF		--	--	--	7
Ink out error / No ink cartridge error	--	OFF	ON		--	--	--	8
read error / write error
Ink cartridge replacement is in progress	Flashing 2	OFF	Flashing 2		--	--	--	9
Ink sequence is in progress	Flashing	--	--		--	--	--	10
No paper error	--	ON	OFF		--	--	--	11
Multi-feed error	---	ON	OFF		--	--	--	11
Index sheet being printed	Flashing*1	--	--		OFF	ON	--	12
						(Paper 1 only)
Index sheet is being scanned & printed	Flashing*1	--	--		OFF	ON*2	--	12
						(selected side)
DPOF printing	Flashing	--	--		ON of “d”	ON	--	12
						(selected side)
Copying	Flashing	--	--		Displays remaining	ON	--	12
					number of copies*3	(selected side)
Camera direct printing	Flashing	--	--		ON of “P”	ON	--	12
						(selected side)
Printing from PC	Flashing	--	--		OFF	OFF	--	13
Scanner operation from PC	Flashing	--	--		OFF	OFF	--	13
Printing & job being canceled	Flashing	--	--		--	--	--	14
Memory card being recognized	Flashing	--	--		--	--	Flashing 3	15
Power ON (Print data processing)	Flashing	--	--		--	--	--	16
Hub connection error	--	Flashing 2	OFF		Flashing 2 of “H”	--	--	17
Camera direct error	--	Flashing 2	OFF		Flashing 2 of “P”	--	--	18
Memory card error	--	Flashing 2	OFF		Flashing 2 of “1”	OFF	--	19
							Continued on	next page
PRODUCT DESCRIPTION		Control Panel						26

Confidential

EPSON Stylus CX7300/CX7400/DX7400/NX200/TX200 series/SX200 series/Stylus CX8300/CX8400/DX8400/NX400/TX400 series/SX400 series Revision C

Table 1-21. CX7300/TX200 series LED Functions

	Printer Status			LED					Pri-
									ority
		Power	Error	Ink		7 Segments	Paper 1/2	Card Access
	Index sheet error	--	Flashing 2	OFF		Flashing 2 of “2”	--	--	20
	(incorrect placement of the sheet)
	Index sheet error	--	Flashing 2	OFF		Flashing 2 of “4”	--	--	21
	(unmatch between the sheet and memory card)
	Index sheet error	--	Flashing 2	OFF		Flashing 2 of “3”	--	--	22
	(incorrect markings on the sheet)
	Ink level low error	--	--	Flashing		--	--	--	23
	In copy mode	--	--	--		Displays remaining	ON	--	24
						number of copies*3	(selected side)
	In DPOF mode	--	--	--		ON of “d”	ON	--	24
							(selected side)
	In camera direct mode	--	--	--		ON of “P”	ON	--	24
							(selected side)
	Power ON (normal idle state)	ON	--	--		--	--	--	25
	No memory card	--	--	--		--	--	OFF	--
	Memory card recognized	--	--	--		--	--	ON	--
	Memory card being accessed	--	--	--		--	--	Flashing 3	--
	Power ON	ON	OFF	OFF		“_”	OFF	--	--
	(panel low power mode)					Low-speed flashing

Note *1: Nothing changes in the normal stand-by status.

*2: Both LEDs turn OFF in the normal stand-by status.

*3: “≡” is displayed when continuous 20 sheets is selected.

Note : --:	No change
Flashing:	Repeats ON and OFF every 1.25 seconds.
Flashing 2:	Repeats ON for 0.5 second, OFF for 0.5 second, ON for 0.5 second, and OFF for 1.0 second.
Flashing 3:	ON and OFF according to the memory card access status.
High-speed flashing:	Repeats ON and OFF every 0.5 second.
Low-speed flashing:	Repeats ON and OFF every 2 seconds.

Note : See “3.3 Error Indications and Fault Occurrence Causes” (p.61) for remedies for errors.

PRODUCT DESCRIPTION

Control Panel

27

Confidential

EPSON Stylus CX7300/CX7400/DX7400/NX200/TX200 series/SX200 series/Stylus CX8300/CX8400/DX8400/NX400/TX400 series/SX400 series Revision C

1.6.2.3 Control Panel Power Saver Mode

If no operation is made on the control panel for approximately 13 minutes, both the CX8300/TX400 series and CX7300/TX200 series automatically enter control panel power saver mode. The details of control panel power save mode are shown below.

Conditions for not entering the control panel power save mode

•The printer or scanner is in operation

•During printing or scanning from PC

•Camera direct is in operation

•Slide show is being displayed

•An error is being displayed

•Mechanical adjustment is being made in setup mode

•Firmware is being updated

Conditions recovering from the control panel power save mode

•Any button other than the power button is pressed (when the power button is pressed, the power is turned OFF)

•A memory card or a camera direct device is connected

•Operation from PC (printing / scanning / maintenance)

NOTE: See “1.7.3.4 Operating Specifications during Connecting DSC (p.37)” for information on the panel operation during connecting a camera to the EXT.IF.

PRODUCT DESCRIPTION	Control Panel	28
		Confidential

EPSON Stylus CX7300/CX7400/DX7400/NX200/TX200 series/SX200 series/Stylus CX8300/CX8400/DX8400/NX400/TX400 series/SX400 series Revision C

1.7 Specification for Each Function

1.7.1 Stand-alone Copy Function

1.7.1.1 Supported Paper and Copy Mode

Table 1-22. Supported Paper and Copy Mode for CX8300/TX400 series

	Paper Type	Size*1	Print	Resolution	Dot	Bi-D	Micro	Border-
			Quality		Size		Weave	less
			Draft	360x120	Eco	ON	OFF	NA
	Plain paper	A4*1, Letter*1	Standard	360x360	VSD1	ON	OFF	NA
			Best	720x720	VSD3	ON	ON	NA
	Matte paper	A4*1, Letter*1	Standard	1440x720	VSD3	ON	ON	OK
	Photo Paper	4x6, 5x7,	Standard	1440x720	VSD3	ON	ON	OK*2
		A4*1, Letter*1
	Prem. Glossy	4x6, 5x7,	Standard	1440x720	VSD3	ON	ON	OK
		A4*1, Letter*1
	Ultra Glossy	4x6, 5x7,	Standard	1440x720	VSD3	ON	ON	OK
		A4*1, Letter*1

Note *1: The model for Latin supports both the letter and A4 sizes. The model for North America supports letter size only, and the other destination models support A4 size only.

*2: Borderless printing of 5x7 size is not supported for EAI.

Table 1-23. Supported Paper and Copy Mode for CX7300/TX200 series

	Paper Type	Size	Print	Resolution	Dot	Bi-D	Micro	Border-
			Quality		Size		Weave	less
	Plain paper	A4*1, Letter*1	Draft	360x120	Eco	ON	OFF	NA
			Standard	360x360	VSD1	ON	OFF	NA
	Photo Paper
	(Photo Paper,	4x6	Standard	1440x720	VSD3	ON	ON	OK
	Prem. Glossy,
	Ultra Glossy)

Note *1: The model for Latin supports both the letter and A4 sizes. The model for North America supports letter size only, and the other destination models support A4 size only.

1.7.1.2 Stand-alone Copy Menu

The stand-alone copy mode menu for the CX8300/TX400 series and CX7300/TX200 series (settable items) are shown in the following tables.

Table 1-24. Copy Menus for CX8300/TX400 series

Menu		Function
Number of copies		Sets the number of copies within the range of 1 to 99.
Copy type		Selects either color or monochrome.
Layout		Selects from the following two layouts:
		• With Border (normal layout with 3mm margins)
		• Borderless (no margins)
	Paper type	Selects paper type from the options shown in Table 1-22.
	Paper size	Selects paper size from the options shown in Table 1-22.
Print
	Quality	Selects print quality from the options shown in Table 1-22.
setting
		Selects Actual or Auto Fit Page.
	Zoom	Or reduction/enlargement ratio can be specified within the range
		of 25% to 400%.
Density		Selects from the nine density levels of -4 to +/-0 to +4.
Expansion		Selects the margins level (margins bleed off the edges of paper)
(for borderless print)		from the Standard (100%), Mid. (50%) or Min. (0%).*

Table 1-25. Copy Settings for CX7300/TX200 series

		Setting Item			Operation and Function
	Number of copies			Sets the number of copies within the range of 1 to 99 using the
				Copies button.
	Copy type			Selects either color or monochrome with the Color button or
				B&W button.
				Selects print layout from the following three options:
	Layout			•	Standard (normal layout with 3mm margins)
				•	Small margin (layout with 1.5mm margins)
				•	Borderless (no margins)
			Paper type	Selects paper type and size from the options shown in Table 1-23
	Print		Paper size	using the Paper Type button.
			Quality	Selects print quality from the options shown in Table 1-23.
	setting
			Zoom	Actual size is selected by default. Autofit can be set by holding
				down the B&W / Color button for 3 seconds or longer.

PRODUCT DESCRIPTION

Specification for Each Function

29

Confidential

EPSON Stylus CX7300/CX7400/DX7400/NX200/TX200 series/SX200 series/Stylus CX8300/CX8400/DX8400/NX400/TX400 series/SX400 series Revision C

1.7.1.3 Relation Between Original and Copy									1.7.1.4 Copy Speed
The scanning start position is located on the front right of the scan bed. The relations									Table 1-26. Copy Speed
between the original placed face down and its copy are as follows.
									Copy Conditions	Model
		Standard copy				Borderless copy
									(eMemo2, A4 size)	CX8300/TX400 series	CX7300/TX200 series
		Readable Length		OTM			Readable Length	OTM
									Monochrome copy
										T.B.D. cpm	T.B.D. cpm
									Draft 360 x 120
									Color copy
	A							A	Monochrome copy	T.B.D. cpm	T.B.D. cpm
	B	a					a	B	Default 360 x 360
					Readable				Color copy		T.B.D. cpm
	C				Width			C
					OLM OLM
		Home position		LM			Home position
					LM
	D	a					a	E
	E				Paper			D
					Width
	F			RM	RM			F
		BM	TM			BM		TM

	Paper Length
					Paper Length
			Scan / Print direction
Figure 1-7. Relation Between Original and Copy (Borderless/With Borders)
Original Document
A	Scan bed			---
B	Scan area		“1-9 Scanning Range” (p.15)
C	Original (face down)			---
OTM	Top margin (out of scan range)		“1-9	Scanning Range” (p.15)
OLM	Left margin (out of scan range)		“1-9	Scanning Range” (p.15)
Copied Document
D	Copied paper			---
E	Print area		“1-7	Printing Area (Margins)” (p.15)
F	Copy			---
LM, RM	Left margin, Right margin*		“1-7	Printing Area (Margins)” (p.15)
TM, BM	Top margin, Bottom margin*
PRODUCT DESCRIPTION					Specification for Each Function			30

Confidential