Bosch B920, B4512-C-920, B921C, B4512-C-921C Quick Reference Guide

1 | Overview

	Status indicators
The Status indicators provide a quick
visual reference for systems status.								Menu tree
	Ready to arm	Alphanumeric display
					The keypad offers an easy-to-use menu tree structure. To access the menu tree, press [MENU] or press [CMD][8]. Each menu
Indicator lights when the system is ready to turn on (arm).					option has a number. At each level, you can press the number for the desired menu option. Otherwise, use [PREV] or [NEXT] to
(24 hour points, such as fire points, are always monitored.)					review your options at that level, and then press [ENTER] when you see the desired menu option.
	On (armed)				The menu tree figure shows the menu structure and the numbers associated for each menu option.
Indicator lights when the system is on (armed).						Press 1 for
	Trouble								Press 1 for
			A1 Lobby			All On menu		Press 1 for	All On Delay
Indicator lights when a trouble condition exists.
		Ready to turn on
	Gas							Part On Delay
		GAS
Indicator lights when a gas alarm exists.						Press 2 for			Press 2 for
	Power				Press 1 for	Part On menu		Press 2 for	All On Instant
Indicator lights when the system has AC (Mains) power.					On/Off menu			Part On Instant		Press 1 for
						Press 3 for			Press 3 for.	Walk Test menu
Programmable function keys						Off menu		Press 3 for	All On Select
					Press 2 for
Press and hold these keys to activate user functions,								Part On Select		Press 2 to
					Status menu
as configured by your security company. Pressing the
						Press 4 for			Press 1 to	Send Test report
keys turns on keypad backlighting, and the keypad								Press 1 to
						Extend Close time
sounds the keypress tone (short beep).								Turn Off	reset sensors
					Press 3 for					Press 3 to
						Press 5 for				display revisions
					Actions menu			Press 2 to	Press 2 to
		Navigation keys	Intrusion function keys
						Bypass menu		Turn Off Select	change output
When pressed, these keys turn on keypad backlighting			When pressed, these keys turn on keypad backlighting
	and emit the keypress tone (short beep).		and emit the keypress tone (short beep).					Press 1 to		Press 4 to
		PREV and NEXT	ALL		Press 4 for	Press 1 to		bypass points	Press 3 for	test notification
When lit, use these keys to scroll through alarm points, lists, and text.			Press to turn the intrusion system All On.		Users menu	View Area Status			Test menu
		ENTER	PART					Press 2 to
Use the [ENTER] key to complete the entry of your passcode, to select a menu			Press to turn the intrusion system Part On.			Press 2 to	unbypass points		Press 4 for	Press 1 to
	item, or to answer Yes to a keypad request.		BYPASS			View Point Status				answer
					Press 5 for				RPS menu
		ESC
			Press to open the menu to bypass points.		Settings menu			Press 1 to
The [ESC] (Escape) key has two uses. First, use the [ESC] (Escape) key to exit from menus			MENU			Press 3 to Send		configure passcode		Press 2 for
and functions. Also, use the key as a backspace when you enter names and numbers.			Press to open the keypad’s Main menu.						Press 5 to
						Status Report				Originate menu
		CMD							go to area
					Press 6 for	Press 1 to		Press 2 to
Use the [CMD] key in combination with one or two number keys to perform								configure name
		select functions.			Shortcuts menu *	change passcode			Press 6 to	Press 3 to
		HELP								call via phone
									update firmware
Use the [HELP] key to go to the keypad Help. The Help shows on						Press 2 to		Press 3 to
	the display in your display language.							configure level
						add user
					Press 7 for
									Press 7 to
					Events menu
									view serv bypassed
						Press 3 to		Press 4 to
								configure keyfob
						edit user
Commands										Press 1 to
	Command	Function	Command	Function	Press 1 to				Press 8 for
									Access menu	Cycle door
You can initiate functions	[CMD] 0	Bypass	[CMD] 4 9	Change Display	view event	Press 4 to		Press 5 to
with the [CMD] key plus the
	[CMD] 0 0	Unbypass	[CMD] 5 0	Go to Area				configure card
one or two digit command.						delete user
									Press 1 to	Press 2 to Unlock
	[CMD] 1	All on (with delay)	[CMD] 5 1	Extend Close	Press 2 to
						Press 1 to				door
					clear event			Press 6 to	adjust brightness
If you know the command	[CMD] 1 1	All On, Instant	[CMD] 5	SKED Menu		change watch mode
								configure language
number, press the [CMD]	[CMD] 2	Part On, Instant	[CMD] 5 3	Delete User
										Press 3 to
key and then the one or two					Press 3 to				Press 2 to
	[CMD] 3	Part On (with delay)	[CMD] 5 4	Output Change Menu				Press 1 to		Lock door
digit command.						Press 2 for			adjust volume
					view log
								set panel date
	[CMD] 4	Silence Trouble Sounders	[CMD] 5 5	Change Passcode		Date/Time
or	[CMD] 4 0	See Alarms	[CMD] 5 6	Add User					Press 3 to	Press 4 to
After you press [CMD], you								Press 2 to		Secure door
	[CMD] 4 1	Test Report	[CMD] 5 7	Default Text		Press 3 to			silence keytone
can use [PREV] or [NEXT]						change schedule		set panel time
	[CMD] 4 2	Status Report	[CMD] 5 8	Fire Walk Test
to move through the list of
commands. Press [ENTER]	[CMD] 4 3	RPS Answer	[CMD] 5 9	Show Revision					Press 4 to
when viewing the desired								Press 3 to
	[CMD] 4 4	Intrusion Walk Test	[CMD] 6	Watch Mode		Press 4 for			set nightlight
command to activate it.						keypad config		show date/time
	[CMD] 4 5	Date and Time	[CMD] 7*	Special Alert _____________
	[CMD] 4 6	Door Control Menu	[CMD] 8	Open Main Menu	*As configured by your security company.
	[CMD] 4 7	Reset Sensors	[CMD] 9*	Special Alert _____________	NOTICE! The Access menu and the option to configure a card are available on compatible security systems only.