Texas Instruments 74ACT11004PWR, 74ACT11004N, 74ACT11004DWR, 74ACT11004DW, 74ACT11004DBR Datasheet

					74ACT11004
					HEX INVERTER
	SCAS215B ± JANAURY 1988 ± REVISED JUNE 1997
D Inputs Are TTL-Voltage Compatible	DB, DW, N, OR PW PACKAGE
D Flow-Through Architecture Optimizes PCB		(TOP VIEW)
Layout	1Y		1	20	1A
D Center-Pin VCC and GND Configurations
	2Y		2	19	2A
Minimize High-Speed Switching Noise	3Y		3	18	3A
D EPIC (Enhanced-Performance Implanted	GND		4	17	NC
CMOS) 1-mm Process	GND		5	16	VCC
D 500-mA Typical Latch-Up Immunity at	GND		6	15	VCC
°	GND		7	14	NC
125 C	4Y		8	13	4A
D Package Options Include Plastic
	5Y		9	12	5A
Small-Outline (DW), Shrink Small-Outline
(DB), and Thin Shrink Small-Outline (PW)	6Y		10	11	6A

Packages and Standard Plastic (N) 300-mil

DIPs	NC ± No internal connection

description

This device contains six independent inverters. It performs the Boolean function Y = A.

The 74ACT11004 is characterized for operation from ±40°C to 85°C.

			FUNCTION TABLE
			(each inverter)
			INPUT		OUTPUT
			A		Y
			H		L
			L		H
logic symbol²
20							1
1A				1				1Y
19							2
2A								2Y
18							3
3A								3Y
							8
13								4Y
4A
12							9
5A								5Y
11							10
6A								6Y

² This symbol is in accordance with ANSI/IEEE Std 91-1984 and IEC Publication 617-12.

Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.

EPIC is a trademark of Texas Instruments Incorporated.

PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters.

Copyright 1997, Texas Instruments Incorporated

POST OFFICE BOX 655303 •DALLAS, TEXAS 75265

1

74ACT11004 HEX INVERTER

SCAS215B ± JANAURY 1988 ± REVISED JUNE 1997

logic diagram (positive logic)

20	1
1A	1Y
19	2
2A	2Y
18	3
3A	3Y
13	8
4A	4Y
12	9
5A	5Y
11	10
6A	6Y

absolute maximum ratings over operating free-air temperature range (unless otherwise noted)²

Supply voltage range, VCC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	. . . . . . . ±0.5 V to 7	V
Input voltage range, VI (see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	±0.5 V to VCC + 0.5	V
Output voltage range, VO (see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	±0.5 V to VCC + 0.5	V
Input clamp current, IIK (VI < 0 or VI > VCC) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	. . . . . . . . . . . ±20 mA
Output clamp current, IOK (VO < 0 or VO > VCC) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	. . . . . . . . . . . ±50 mA
Continuous output current, IO (VO = 0 to VCC) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	. . . . . . . . . . . ±50 mA
Continuous current through VCC or GND . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	. . . . . . . . . . ±150 mA
Package thermal impedance, θJA (see Note 2): DB package . . . . . . . . . . . . . . . . . . . . . . .	. . . . . . . . . . 115°C/W
DW package . . . . . . . . . . . . . . . . . . . . . .	. . . . . . . . . . . 97°C/W
N package . . . . . . . . . . . . . . . . . . . . . . . .	. . . . . . . . . . . 67°C/W
PW package . . . . . . . . . . . . . . . . . . . . . .	. . . . . . . . . . 128°C/W
Storage temperature range, Tstg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	. . . . ±65°C to 150°C

²Stresses beyond those listed under ªabsolute maximum ratingsº may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under ªrecommended operating conditionsº is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.

NOTES: 1. The input and output voltage ratings may be exceeded if the input and output current ratings are observed.

2.The package thermal impedance is calculated in accordance with JESD 51, except for through-hole packages, which use a trace length of zero.

recommended operating conditions

		MIN	MAX	UNIT
VCC	Supply voltage	4.5	5.5	V
VIH	High-level input voltage	2		V
VIL	Low-level input voltage		0.8	V
VI	Input voltage	0	VCC	V
VO	Output voltage	0	VCC	V
IOH	High-level output current		±24	mA
IOL	Low-level output current		24	mA
t/ v	Input transition rise or fall rate	0	10	ns/V
TA	Operating free-air temperature	±40	85	°C

2	POST OFFICE BOX 655303 •DALLAS, TEXAS 75265