3. Disassembly and Reassembly
3-1. Cabinet and PCB
3-1-1 Ass’y Cover Housing Removal
1 REMOVE 2 SCREWS.
"A"
2 Remove the ass’y cover housing in the direction of arrow A .
Fig. 3-1 Ass’y Cover Housing Removal
Samsung Electronics |
3-1 |
Disassembly and Reassembly
3-1-2 Ass’y Case Top Removal
1REMOVE CASE TOP BY GENTLELY RELEASING 1 LOCKING TABS WITH A SMALL SCREW DRIVER. (SEE DETAIL "A")
REASSEMBLY : PUT THE 4 TABS INTO THE SLOT,
WHILE SLIDING IT AS SHOWN IN DETAIL "B".
1 LOCKING TAB
"B" 
PRECISION
SCREW DRIVER
< DETAIL "A" > |
< DETAIL "B" > |
Fig. 3-2 Ass’y Case Top Removal
3-2 |
Samsung Electronics |
Disassembly and Reassembly
3-1-3 Ass’y Front Removal
2REMOVE THE ASS’Y FRONT IN THE DIRECTION OF ARROW "A".
1
1 REMOVE 2 SCREWS.
"A"
3PISCOANECT THE CONNECTOR FROM THE MAIN PCB.
Fig.3-3 Ass’y Front Removal
Samsung Electronics |
3-3 |
Disassembly and Reassembly
3-1-4 Ass’y Case Left Removal
5REMOVE THE ASS’Y CASE Right IN THE DIRECTION OF ARROW "A".
3 REMOVE 2 SCREWS.
"A"
4 DISASSEMBLE AFTER TURNING KNOB to be "LOCK".
2 REMOVE 3 SCREWS.
1 REMOVE 1 SCREWS.
Fig. 3-4 Ass’y Case Left Removal
3-4 |
Samsung Electronics |
Loading...