Samsung LA22A350C1 Manual

Contact SAMSUNG WORLDWIDE

If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care centre.

,

2862 6001 www.samsung.com/hk

LCD TV

user manual

imagine the possibilities

Thank you for purchasing this Samsung product. To receive more complete service, please register your product at

www.samsung.com/global/register

Model

Serial No.

BN68-01507B-00

Precautions When Displaying a Still Image

A still image may cause permanent damage to the TV screen.

•Do not display a still image on the LCD panel for more than 2 hours as it can cause screen image retention. This image retention is also known as "screen burn". To avoid such image retention, reduce the degree of brightness and contrast of the screen when displaying a still image.

•Watching the LCD TV in 4:3 format for a long period of time may leave traces of borders

displayed on the left, right and center of the screen caused by the difference of light emission on the screen. Playing a DVD or a game console may cause a similar effect to the screen. Damages caused by the above effect are not covered by the Warranty.

•Displaying still images from Video games and PC for longer than a certain period of time may produce partial after-images.

To prevent this effect, reduce the ‘brightness’ and ‘contrast’ when displaying still images.

©2008 Samsung Electronics Co., Ltd. All rights reserved.

Contents

Connecting and Preparing Your TV

List of Parts.........................................................	2
Installing the Stand.............................................	2
Installing the Wall Mount Kit................................	2
Viewing the Control Panel...................................	3
Viewing the Connection Panel............................	4
Viewing the Remote Control...............................	6
Installing Batteries in the Remote Control..........	7
Switching On and Off..........................................	7
Placing Your Television in Standby Mode...........	7
Viewing the Menus..............................................	8
Using the TOOLS Button....................................	8
Plug & Play.........................................................	9
Setting the Channels
Storing Channels Automatically........................	10
Storing Channels Manually................................	11
Adding / Locking Channels...............................	12
Sorting the Stored Channels.............................	13
Assigning Channels Names..............................	13
Fine Tuning Channel Reception.......................	14
Setting the Picture
Changing the Picture Standard.........................	15
Adjusting the Custom Picture...........................	16
Configuring Detailed Settings on the Picture....	16
Resetting the Picture Settings to the
Factory Defaults................................................	17
Changing the Picture Options...........................	18
Viewing the Picture In Picture (PIP)..................	20
Setting the Sound
Sound Features................................................	21
Selecting the Sound Mode................................	22
Connecting Headphones (Sold separately)......	22

Setting the Time
Setting and Displaying the Current Time..........	23
Setting the Sleep Timer....................................	23
Switching the Television On and Off
Automatically.....................................................	24
Function Description
Choosing Your Language.................................	24
Melody / Entertainment / Energy Saving .........	25
Selecting the Source.........................................	26
Editing the Input Source Names.......................	26
Setting the PC
Setting up Your PC Software
(Based on Windows XP)...................................	27
Display Modes..................................................	27
Setting up the TV with your PC.........................	28
Recommendations For Use
Teletext Feature................................................	29
Using the Anti-Theft Kensington Lock
(depending on the model).................................	31
Troubleshooting: Before Contacting
Service Personnel.............................................	32
Technical and Environmental Specifications ....	33

English

Symbol Press Note

Button

English - 1

List of Parts

Please make sure the following items are included with your LCD TV.

If any items are missing, contact your dealer.

M4XL16

Remote Control &
Batteries	Power Cord	Cover-Bottom	Stand Screw X 4	Stand	Cleaning Cloth
(AAA x 2)
 Owner’s Instructions		 Warranty card	 Safety Guide		 Registration Cards

Warranty card / Safety Guide / Registration Cards (Not available in all locations)

The stand and stand screw may not be included depending on the model.

Installing the Stand

2

1

1.Connect your LCD TV and the stand.

Two or more people should carry the TV.

Make sure to distinguish between the front and back of the stand when assembling them.

2.Fasten two screws at position 1 and then fasten two screw at position 2.

Stand the product up and fasten the screws. If you fasten the screws with the LCD TV placed down, it may lean to one side.

Installing the Wall Mount Kit

Wall mount items (sold separately) allow you to mount the TV on the wall.

For detailed information on installing the wall mount, see the instructions provided with the Wall Mount items. Contact a technician for assistance when installing the wall mounted bracket. Samsung Electronics is not responsible for any damage to the product or injury to yourself or others if you elect to install the TV on your own.

Do not install your Wall Mount Kit while your TV is turned on. It may result in personal injury due to electric shock.

Remove the stand and cover the bottom hole with a cap and fasten with two screws.

English -

Viewing the Control Panel

Side Panel buttons

1

2

3

4

5

6

8	8	7

The product colour and shape may vary depending on the model.

1SOURCE

Toggles between all the available input sources (TV, AV, S-Video, Component1, Component2, PC, HDMI).

In the on-screen menu, use this button as you use the ENTER button on the remote control.

2MENU

Press to see an on-screen menu of your TV’s features.

3+ VOL -

Press to decrease or increase the volume. In the on-screen menu, use the + VOL - buttons as you use the ◄ and ► buttons on the remote control.

4 CH

Press to change channels. In the on-screen menu, use theCHbuttons as you use the ▲ and ▼ buttons on the remote control. (Without the Remote Control, you can turn on the TV by using the Channel buttons.)

5(Power)

Press to turn the TV on and off.

6Remote Control Sensor

Aim the remote control towards this spot on the TV.

7Power Indicator

Blinks and turns off when the power is on and lights up in stand-by mode.

8Speakers

English -

Viewing the Connection Panel

1

2

3

4

Power Input

8	7	6	5

The product colour and shape may vary depending on the model.

Whenever you connect an external device to your TV, make sure that power on the unit is turned off.

When connecting an external device, match the colour of the connection terminal to the cable.

1HDMI / DVI IN [R-AUDIO-L]

-Supports connections between HDMI-connection-enabled AV devices (Set-Top Boxes, DVD players)

-No additional Audio connection is needed for an HDMI to HDMI connection.

-When using an HDMI/DVI cable connection, you must use the HDMI IN / DVI IN jack.

What is HDMI?

-“High Definition Multimedia interface” allows the transmission of high definition digital video data and multiple channels of digital audio.

-The HDMI/DVI terminal supports DVI connection to an extended device with the appropriate cable (not supplied). The difference between HDMI and DVI is that the HDMI device is smaller in size, has the HDCP (High Bandwidth Digital Copy Protection) coding feature installed, and supports

multi - channel digital audio.

2PC IN [PC] / [AUDIO]

-Connect to the video and audio output jack on your PC.

3ANT IN

To view television channels correctly, a signal must be received by the set from one of the following sources:

-An outdoor aerial / A cable television network / A satellite network

English -

4Headphones jack

-Headphone may be connected to the headphone output on your set. While the head phone is connected, the sound from the built-in speakers will be disabled.

5Kensington Lock (depending on the model)

-The Kensington Lock (optional) is a device used to physically fix the system when used in a public place.

-If you want to use a locking device, contact the dealer where you purchased the TV.

-The location of the kensington Lock may be different depending on its model.

6Connecting External A/V Devices

-Connect RCA cable to an appropriate external A/V device such as VCR, DVD or Camcorder.

-Connect RCA audio cables to [R-AUDIO-L] on the rear of your set and the other ends to corresponding audio out connectors on the A/V device.

7SERVICE

-Connector for SERVICE only.

8COMPONENT IN

-Connect component video cables (optional) to component connector ("PR", "PB", "Y") on the rear of your set and the other ends to corresponding component video out connectors on the DVD.

-If you wish to connect both the Set-Top Box and DVD, you should connect the Set-Top Box to the DVD and connect the DVD to component connector ("PR", "PB", "Y") on your set.

-The PR, PB and Y connectors on your component devices (DVD) are sometimes labeled Y, B-Y and R-Y or Y, Cb and Cr.

-Connect RCA audio cables (optional) to [R-AUDIO-L] on the rear of your set and the other ends to corresponding audio out connectors on the DVD.

English -

Viewing the Remote Control

1 Television Standby button

2 Selects the TV mode directly

3 Number buttons for direct channel access

4 One/Two-digit channel selection

5 + : Volume increase

: Volume decrease

6 Temporary sound switch-off

7 Use to quickly select frequently used functions.

8 Use to see information on the current broadcast

9 Colour buttons :

Use these buttons in the teletext.

!Displays the Channel List on screen

@ Available source selection

# Previous channel

$ P : Next channel

P: Previous channel

%Returns to the previous menu

^Control the cursor in the menu

& Exit the on-screen menu * Picture size selection

( Displays the main on-screen menu

) Selects the HDMI mode directly.

a Picture effect selection

Teletext Functions

2 Exit from the teletext display

7 Teletext size selection

8 Teletext reveal

9 Fastext topic selection

0Alternately select Teletext, Double, or Mix.

! Teletext store

@Teletext mode selection (LIST/FLOF)

# Teletext sub page

$ P : Teletext next page

P: Teletext previous page % Teletext hold

& Teletext cancel ( Teletext index

The performance of the remote control may be affected by bright light.

TOOLS

P.SIZE

English -

Installing Batteries in the Remote Control

1.Lift the cover at the back of the remote control upward as shown in the

figure.

2. Install two AAA size batteries.

Make sure to match the "+" and "–" ends of the batteries with the diagram inside the compartment.

3. Replace the cover.

Remove the batteries and store them in a cool, dry place if you won’t be using the remote control for a long time.

If the remote control doesn’t work, check the following:

1.Is the TV power on?

2.Are the plus and minus ends of the batteries reversed?

3. Are the batteries drained?

4. Is there a power outage, or is the power cord unplugged?

5. Is there a special fluorescent light or neon sign nearby?

Switching On and Off

The mains lead is attached to the rear of your set.

1.Plug the mains lead into an appropriate socket.

The standby indicator lights up on your set.

2.Press the button on your set.

You also can press the POWER button or the TV button on the remote control to turn the TV on.

The channel that you were watching last is reselected automatically

3.Press the numeric button (0~9) or channel up/down (/) button on the remote control orCH button on your set.

When you switch the set on for the very first time, you will be asked to choose language in which the menus are to be displayed.

4.To switch your set off, press the POWER button again.

Placing Your Television in Standby Mode

Your set can be placed in standby mode in order to reduce the power consumption. The standby mode can be useful when you wish to interrupt viewing temporarily (during a meal, for example).

1.Press the POWERbutton on the remote control.

The screen is turned off and a red standby indicator appears on your set.

2.To switch your set back on, simply press the POWER, numeric buttons (0~9), TV button or channel up/down (/) button again.

Do not leave your set in standby mode for long periods of time (when you are away on holiday, for example).

It is best to unplug the set from the mains and aerial. 

English -

Viewing the Menus

1.With the power on, press the MENU button.

The main menu appears on the screen. The menu’ s left side has icons: Picture, Sound, Channel, Setup, Input.

2.Press the ▲ or ▼ button to select one of the icons.

Then press the ENTER button to access the icon’s submenu.

3.Press the EXIT button to exit.

The on-screen menus disappear from the screen after about one minute.

TV	Picture
Mode	: Standard		
Backlight			7
Contrast			95
Brightness			45
Sharpness			50
Colour	G 50	r	50
Tint			0
Detailed Settings			
Picture Options	: OK		
Reset			
Move	Enter	Return

Using the TOOLS Button

You can use the TOOLS button to select your frequently used functions quickly and easily. The “Tools” menu change depending on which external input mode you are viewing.

1.Press the TOOLS button.

The “Tools” menu will appear.

2.Press the ▲ or ▼ button to select a menu.

3.Press the ▲/▼/◄/►/ENTER buttons to display, change, or use the selected items. For a more detailed description of each function, refer to the corresponding page.

•Picture Mode, see page 15

•Sound Mode, see page 21

•Sleep Timer, see page 23

•SRS TS XT, see page 21

•Energy Saving, see page 25

•Dual l-ll, see page 22

•PIP, see page 20

•Auto Adjustment, see page 28

			Tools
Picture Mode					◄ Standard		►
Sound Mode						: Custom
Sleep Timer						: Off
SRS TS XT						: Off
Energy Saving						: Off
Dual l-ll						: Mono
Move			Adjust			Exit
TOOLS

English -

Plug & Play

When the TV is initially powered on, several basic settings proceed automatically and subsequently. The following settings are available.

1.Press the POWER button on the remote control.

The message "Start Plug & Play." is displayed with "OK" selected.

2.Select the appropriate language by pressing the ▲ or ▼ button.

Press the ENTER button to confirm your choice.

Plug & Play

Start Plug & Play.

OK

Enter

3.Press the ◄ or ► button to select “Store Demo” or “Home Use”, then the ENTER button.

We recommend setting the TV to "Home Use" mode for the best picture in your home environment.

"Store Demo" mode is only intended for use in retail environments.

If the unit is accidentally set to “Store Demo” mode and you want to return to “Home Use”

(Standard): Press the Volume button on the TV. When the volume OSD is displayed, press and hold the MENU button on the TV for 5 seconds

4.The message "Check antenna input." is displayed with "OK" selected. Press the ENTER button.

Please check that the antenna cable is connected correctly.

5.Select the appropriate area by pressing the ▲ or ▼ button.

Press the ENTER button to confirm your choice.

6.The "Auto Store" menu is displayed with the "Start" selected. Press the ENTER button.

The channel search will start and end automatically.

After all the available channels are stored, the "Clock Set" menu appears.

Press the ENTER button at any time to interrupt the memorization process.

7.Press the ENTER button.

Select the "Month", "Day", "Year", "Hour", "Minute" or "am/pm" by pressing the ◄ or ► button. Set the "Month", "Day", "Year", "Hour", "Minute" or "am/pm" by pressing the ▲ or ▼ button.

You can also set the “Month”, “Day”, “Year”, “Hour” and "Minute" by pressing the number buttons on the remote control.

8.Press the ENTER button to confirm your setting. The message “Enjoy your viewing” is displayed.

When you have finished, press the ENTER button.

Even if the ENTER button is not pressed, the message will automatically disappear after several seconds.

Language: Select your language.

Area: Select your area.

Auto Store: Automatically scans for and stores channels available in the local area.

Clock Set: Sets the current time for the TV clock.

If you want to reset this feature...

1.Press the MENU button to display the menu.

Press the ▲ or ▼ button to select "Setup" then press the ENTER button.

2.Press the ENTER button again, to select "Plug & Play". For further details on setting up options, refer to the page 9.

The “Plug & Play” feature is only available in the TV mode.

TV	Setup
Plug & Play	: English	
Language		
Time	: Off	
Melody		
Entertainment	: Off	
Energy Saving	: Off	
PIP		
Move	Enter	Return

English -

Storing Channels Automatically

You can scan for the frequency ranges available to you (and availability depends on your area).

Automatically allocated programme numbers may not correspond to actual or desired programme numbers. However, you can sort numbers manually and clear any channels you do not wish to watch.

1.Press the MENU button to display the menu.

Press the ▲ or ▼ button to select "Channel", then press the ENTER button.

TV	Channel
Area	: Asia/W.Europe		
Auto Store			
Manual Store			
Channel Manager			
Sort			
Name			
Fine Tune			
Move	Enter	Return

2.Press the ENTER button to select "Area".

3.Select the appropriate area by pressing the ▲ or ▼ button. Press the ENTER button to confirm your choice.

4.Press the ▲ or ▼ button to select "Auto Store", then press the ENTER button.

5.Press the ENTER button.

The TV will begin memorizing all of the available channels.

Press the ENTER button at any time to interrupt the memorization process and return to the "Channel" menu.

6.After all the available channels are stored, the "Sort" menu appears. (refer to page 13)

English - 10

Storing Channels Manually
You can store television channels, including those received					TV		Channel
						Area	: Asia/W.Europe		
via cable networks.						Manual Store			
When storing channels manually, you can choose:						Auto Store			
						Sort			
♦ Whether or not to store each of the channels found.						Channel Manager			
						Fine Tune			
						Name			
♦ The programme number of each stored channel which you wish
to identify.
1. Press the MENU button to display the menu.
	Press the ▲ or ▼ button to select "Channel", then press the					Move	Enter	Return
	ENTER	button.			TV	Manual Store
2.	Press the ▲ or ▼ button to select "Manual Store", then press								
						Colour System	: Auto
	the ENTER		button.			Programme	: P 1
						Channel	: S 6
						Sound System	: BG		
3. Select the required option by pressing the ▲ or ▼ button,						Search	: 140 MHz
						Store	: ?
	then press the ENTER			button.
4. When you are satisfied with your setting, press the
	ENTER	button.

5.	Press the EXIT button to exit.	Move	Enter	Return

♦Programme (Programme number to be assigned to a channel)

− Press the ▲ or ▼ button until you find the correct number.

You can also select the channel number directly by pressing the numeric buttons (0~9).

♦Colour System: Auto/PAL/SECAM/NTSC4.43/NTSC3.58

−Press the ▲ or ▼ button to select the required colour standard.

♦Sound System: BG/DK/I/M

−Press the ▲ or ▼ button to select the required sound standard.

♦Channel (When you know the number of the channel to be stored)

−Press the ▲ or ▼ button to select C (Air channel) or S (Cable channel).

−Press the ► button, then press the ▲ or ▼ button to select the required number.

You can also select the channel number directly by pressing the numeric buttons (0~9). If there is abnormal sound or no sound, re-select the sound standard required.

♦Search (When you do not know the channel numbers)

−Press the ▲ or ▼ button to start the search.

−The tuner scans the frequency range until the first channel or the channel that you selected is received on the screen.

♦Store (When you store the channel and associated programme number)

−Set to "OK" by pressing the ENTER button.

Channel mode

−P (Programme mode): When completing tuning, the broadcasting stations in your area have been assigned to position numbers from P00 to P99. You can select a channel by entering the position number in this mode.

−C (Air channel mode): You can select a channel by entering the assigned number to each air broadcasting station in this mode.

−S (Cable channel mode): You can select a channel by entering the assigned number for each cable channel in this mode.

English - 11

Adding / Locking Channels

Using the Channel Manager, you can conveniently lock or add channels.

1.Press the MENU button to display the menu.

Press the ▲ or ▼ button to select "Channel", then press the ENTER button.

2.Press the ▲ or ▼ button to select "Channel Manager", then press the ENTER button.

♦Adding channels

Using the Channel List, you can add channels.

3.Select "Channel List" by pressing the ENTER button.

4.Move to the () field by pressing the ▲, ▼, ◄ or ► button, select a channel to be added, and press the ENTER button to add the channel.

If you press the ENTER button again, the () symbol next to the channel disappears and the channel is not added.

"" is active when "Child Lock" is selected to "On".

♦Locking channels

This feature allows you to prevent unauthorized users, such as children, from watching unsuitable programmes by muting out video and audio.

5.Press the ▲ or ▼ button to select "Child Lock", then press the ENTER button.

6.Select "On" by pressing the ▲ or ▼ button, then press the

ENTER button.

7.Press the ▲ or ▼ button to select "Channel List", then press the ENTER button.

8.Move to the "" field by pressing the ▲, ▼, ◄ or ► button, select a channel to be locked, and press the ENTER button.

If you press the ENTER button again, the () symbol next to the channel disappears and the channel lock is cancelled.

A blue screen is displayed when "Child Lock" is activated.

9.Press the EXIT button to exit.

Select "On" or "Off" in "Child Lock" to easily turn the channels which selected on "" to be active or inactive.

You can select these options by simply pressing the CH LIST button on the remote control.

TV		Channel
	Area	: Asia/W.Europe		
	Auto Store			
	Manual Store			
	Channel Manager			
	Sort			
	Name			
	Fine Tune			
	Move	Enter	Return
TV	Channel Manager

Channel List	: Off	
Child Lock		

Move

Enter

Return

Channel List

P 1 C3

1 / 10

Prog.

0 C--

1C3

2BBC 1

3C74

4C75

5C76

6S3

7S4

8S6

9S7

Add	Lock
Move	Enter
Page	Return

P.SIZE

English - 12

Sorting the Stored Channels

This operation allows you to change the programme numbers of the stored channels.

This operation may be necessary after using the auto store.

1.Press the MENU button to display the menu.

Press the ▲ or ▼ button to select "Channel", then press the

ENTER button.

2.Press the ▲ or ▼ button to select "Sort", then press the ENTER button.

3.Select the channel number that you wish to change by pressing the ▲ or ▼ button repeatedly.

Press the ENTER button.

The selected channel number and name are moved to right side.

4.Press the ▲ or ▼ button to move to the position in which you would like to change and then press the ENTER button.

5.Repeat steps 3 to 4 for another channel to be sorted.

6.Press the EXIT button to exit.

TV		Channel
Area		: Asia/W.Europe		
Auto Store				
Manual Store				
Channel Manager				
Sort				
Name				
Fine Tune				
	Move	Enter	Return
TV		Sort
Prog.	Ch.	Name
0	C--	-----
1	C23	-----	
2	S06	-----
3	S07	-----
4	S09	-----
5	S12	-----
6	S13	-----
7	S14	-----
8	S17	-----
9	C21	-----
	
	Move	Enter	Return

Assigning Channels Names

Channel names will be assigned automatically when channel information is broadcast. These names can be changed, allowing you to assign new names.

1.Press the MENU button to display the menu.

Press the ▲ or ▼ button to select "Channel", then press the ENTER button.

2.Press the ▲ or ▼ button to select "Name", then press the ENTER button.

3.If necessary, select the channel to be assigned to a new name by pressing the ▲ or ▼ button. Press the ENTER button.

The selection bar is displayed around the name box.

4.
	To...	Then...
	Select a letter, number or symbol	Press the ▲ or ▼ button
	Move on the next letter	Press the ► button
	Move back the previous letter	Press the ◄ button
	Confirm the name	Press the ENTER button

TV		Channel
Area		: Asia/W.Europe		
Auto Store				
Manual Store				
Channel Manager				
Sort				
Name				
Fine Tune				
Move		Enter	Return
TV		Name
Prog.	Ch.	Name
0	C--	-----
1	C23	-----
2	S06	-----
3	S07	-----
4	S09	-----
5	S12	-----
6	S13	-----
7	S14	-----
8	S17	-----
9	C21	-----
	

Move

Enter

Return

The following characters are available: Letters of the alphabet (A~Z) / Numbers (0~9) / Special characters (+, -, *, /, space)

5.Repeat steps 3 to 4 for each channel to be assigned to a new name.

6.Press the EXIT button to exit.

English - 13

Fine Tuning Channel Reception

Use fine tuning to manually adjust a particular channel for optimal reception.

1.Use the number buttons to directly select the channel that you want to fine tune.

2.Press the MENU button to display the menu.

Press the ▲ or ▼ button to select "Channel", then press the ENTER button.

3.Press the ▲ or ▼ button to select "Fine Tune", then press the ENTER button.

4.Press the ◄ or ► button to adjust the fine tuning. Press the ENTER button.

5.Press the EXIT button to exit.

Fine tuned channels that have been saved are marked with an asterisk "*" on the right-hand side of the channel number in the channel banner. And the channel number turns red.

To reset the fine-tuning, select "Reset" by pressing the ▲ or ▼ button and then press the ENTER button.

TV	Channel
Area	: Asia/W.Europe		
Auto Store			
Manual Store			
Channel Manager			
Sort			
Name			
Fine Tune			
Move	Enter	Return

	Fine Tune
P 1
		0
	Reset
Adjust	Save	Return

English - 14

Changing the Picture Standard

You can select the type of picture which best corresponds to your viewing requirements.

1.Press the MENU button to display the menu. Press the ENTER button, to select "Picture".

2.Press the ENTER button again, to select "Mode".

3.Press the ▲ or ▼ button to select the desired picture effect. Press the ENTER button.

4.Press the EXIT button to exit.

♦Dynamic: Selects the picture for high-definition in a bright room.

♦Standard: Selects the picture for optimum display in a normal environment.

♦Movie: Selects the picture for comfortable display in a dark room.

The Picture mode must be adjusted separately for each input source.

OYou can also press the P.MODE button on the remote control to select one of the picture settings.

	TV		Picture
		Mode	: Standard					
		Backlight						7
		Contrast						95
		Brightness						45
		Sharpness						50
		Colour						50
		Tint	G 50			r		0
		Detailed Settings						
		Picture Options	: OK					
		Reset						
		Move	Enter			Return
			Picture
	TV
		Mode	:	Dynamic
		Backlight		Standard				7
		Contrast			Movie			95
		Brightness						45
		Sharpness						50
		Colour						50
		Tint	G 50			r		0
		Detailed Settings
		Picture Options	: OK
		Reset
		Move	Enter			Return

P.SIZE

Easy Setting

1.Press the TOOLS button on the remote control.

2.Press the ▲ or ▼ button to select "Picture Mode".

3.Press the ◄ or ► button to select the required option.

4.Press the EXIT or TOOLS button to exit.

		Tools
Picture Mode		◄ Standard ►
Sound Mode			: Custom
Sleep Timer			: Off
SRS TS XT			: Off
Energy Saving			: Off
Dual l-ll			: Mono
	Move	Adjust	Exit

English - 15

Adjusting the Custom Picture

Your set has several settings which allow you to control picture quality.

1.To select the desired picture effect, follow the

"Changing the Picture Standard" instructions number 1 to 3. (On page 15)

2.Press the ▲ or ▼ button to select a particular item. Press the ENTER button.

3.Press the ◄ or ► button to decrease or increase the value of a particular item. Press the ENTER button.

4.Press the EXIT button to exit.

♦Backlight: Adjusts the screen brightness by adjusting the LCD backlight brightness. (0~10)

♦Contrast: Adjusts the lightness and darkness between objects and the background.

♦Brightness: Adjusts the brightness of the whole screen.

♦Sharpness: Adjusts the outline of objects to either

sharpen them or make them more dull.

♦Colour: Adjusts the colours, making them lighter or darker.

♦Tint: Adjusts the colour of objects, making them more red or green for a more natural look.

TV	Picture
Mode	: Standard		
Backlight			7
Contrast			95
Brightness			45
Sharpness			50
Colour	G 50	r	50
Tint			0
Detailed Settings			
Picture Options	: OK		
Reset			
Move	Enter	Return
▲
Backlight		7
▼

Move

Adjust

Return

The adjusted values are stored according to the selected Picture mode.

In PC mode, you can only make changes to "Backlight", "Contrast" and "Brightness". TV, AV, S-Video modes of the PAL system, you cannot use the "Tint" Function.

You can return to the factory defaults picture settings by selecting the "Reset". (Refer to "Resetting the Picture Settings to the Factory Defaults" on page 17)

Configuring Detailed Settings on the Picture

You can set detailed picture settings.

1.Press the MENU button to display the menu. Press the ENTER button, to select "Picture".

2.Press the ENTER button to select “Mode”.

Press the ▲ or ▼ button to select “Standard” or “Movie”, then press the ENTER button.

3.Press the ▲ or ▼ button to select "Detailed Settings", then press the ENTER button.

4.Select the required option by pressing the ▲ or ▼ button, then press the ENTER button.

5.When you are satisfied with your setting, press the ENTER button.

6.Press the EXIT button to exit.

"Detailed Settings" is available in "Standard" or "Movie" mode.

In PC mode, you can only make changes to

“Dynamic Contrast”, “Gamma” and “White Balance” from among the “Detailed Settings” items.

TV	Picture
Mode	: Standard		
Backlight			7
Contrast			95
Brightness			45
Sharpness			50
Colour	G 50	r	50
Tint			0
Detailed Settings			
Picture Options	: OK		
Reset			
Move	Enter	Return

TV	Detailed Settings
	Black Adjust	: Off		
	Dynamic Contrast	: Medium		
	Gamma	:	0	
	Colour Space	: Native		
	White Balance	:	0	
	Flesh Tone			
	Edge Enhancement	: On		
	Move	Enter		Return

English - 16

♦Black Adjust: Off/Low/Medium/High

You can directly select the black level on the screen to adjust the screen depth.

♦Dynamic Contrast: Off/Low/Medium/High

You can adjust the screen contrast so that the optimal contrast is provided.

♦Gamma: -3 ~ +3

You can adjust the Primary Colour (Red, Green, Blue) Intensity.

Press the ◄ or ► button until you reach the optimal setting.

♦Colour Space: Auto/Native/Custom

Colour space is a Colour matrix composed of red, green and blue colours. Select your favourite Colour space to experience the most natural Colour.

♦Auto: Auto Color Space automatically adjusts to the most natural color tone based on program sources.

♦Native: Native Color Space offers deep and rich color tone.

♦Custom: Adjusts the color range to suit your preference.

Customizing the Colour Space

Colour: Red/Green/Blue/Yellow/Cyan/Magenta

Adjusts the Colour range to suit your preference.

“Colour” is available when “Colour Space” is set to “Custom”.

Press the ▲ or ▼ button to select “Red”, “Green”, “Blue”, “Yellow”, “Cyan” or “Magenta”.

Press the ENTER button.

Red/Green/Blue: In "Colour", you can adjust the RGB values for the selected colour.

Press the ▲ or ▼ button to select "Red", "Green" or "Blue" to change it. Press the ENTER button.

Press the ◄ or ► button to decrease or increase the value of a particular item.

Press the ENTER button.

Reset: Resets the colour space to the default values.

♦White Balance: R-Offset/G-Offset/B-Offset/R-Gain/G-Gain/B-Gain/Reset

You can adjust the colour temperature for more natural picture colours.

R-Offset/G-Offset/B-Offset/R-Gain/G-Gain/B-Gain: Changing the adjustment value will refresh the adjusted screen.

Select the required option by pressing the ▲ or ▼ button, then press the ENTER button. Press the ◄ or ► button until you reach the optimal setting.

Reset: The previously adjusted white balance will be reset to the factory defaults.

♦Flesh Tone: -15 ~ +15

You can emphasize the pink 'flesh tone' in the picture.

Press the ◄ or ► button until you reach the optimal setting.

Changing the adjustment value will refresh the adjusted screen.

♦Edge Enhancement: Off/On

You can emphasize object boundaries in the picture.

Resetting the Picture Settings to the Factory Defaults

You can return to the factory defaults picture settings.

1.To select the desired picture effect, follow the

"Changing the Picture Standard" instructions number 1 to 3 on page 15.

2.Press the ▲ or ▼ button to select "Reset", then press the

ENTER button.

3.Press the ▲ or ▼ button to select "OK" or "Cancel". Press the ENTER button.

4.Press the EXIT button to exit.

The "Reset" will be set for each Picture mode.

TV	Picture
Mode	: Standard		7
Backlight
Contrast			95
Brightness			45
Sharpness			50
Colour	G 50	r	50
Tint			0
Detailed Settings
Picture Options
Reset	:	OK
		Cancel
Move	Enter	Return

English - 17

Changing the Picture Options

1.Press the MENU button to display the menu. Press the ENTER button, to select "Picture".

2.Press the ▲ or ▼ button to select “Picture Options”, then press the ENTER button.

3.Select the required option by pressing the ▲ or ▼ button, then press the ENTER button.

4.When you are satisfied with your setting, press the ENTER button.

5.Press the EXIT button to exit.

In PC mode, you can only make changes to the

“Colour Tone” and “Size” from among the items in “Picture Options”.

♦Colour Tone: Cool2/Cool1/Normal/Warm1/Warm2

You can select the most comfortable colour tone to your eyes.

The adjusted values are stored according to the selected Picture mode.

TV	Picture
Mode	: Standard		
Backlight			7
Contrast			95
Brightness			45
Sharpness			50
Colour	G 50	r	50
Tint			0
Detailed Settings			
Picture Options	: OK		
Reset			
Move	Enter	Return

TV	Picture Options
	Colour Tone	: Normal	
	Size	: Wide	
	Digital NR	: Auto	
	DNle	: Off	
	HDMI Black Level	: Normal	
	Blue Only Mode	: Off	
	Move	Enter	Return

“Warm1” or “Warm2” is only activated when the picture mode is "Movie".

♦Size: Wide/16:9/Wide Zoom/Zoom/4:3

You can select the picture size which best corresponds to your viewing requirements.

♦Wide: Adjusts the picture size to Wide appropriate for DVDs or wide broadcasting.

♦16:9: Adjusts the picture size to 16:9 appropriate for DVDs or wide broadcasting.

♦Wide Zoom: Magnify the size of the picture more than 4:3.

♦Zoom: Magnifies the 16:9 wide picture (in the vertical direction) to fit the screen size.

♦4:3: This is the default setting for a video movie or normal broadcasting.

In PC Mode, only "Wide" and "4:3" mode can be adjusted.

Settings can be adjusted and stored for each external device you have connected to an input of the TV.

Temporary image retention may occur when viewing a static image on the set for more than two hours.

Wide Zoom: Move the screen up/down using the ▲ or ▼ button after selecting the by

pressing the ► or ENTER button.Zoom: Select by pressing the ◄ or ►button.

Use the ▲ or ▼button to move the picture up and down.After selecting ,

use the ▲ or ▼ button to magnify or reduce the picture size in the vertical direction.

OYou can select these options by simply pressing the P.SIZE button on the remote control.

P.SIZE

English - 18

♦Digital NR: Off/Low/Medium/High/Auto

If the broadcast signal received by your TV is weak, you can activate the Digital Noise Reduction feature to help reduce any static and ghosting that may appear on the screen.

When the signal is weak, select one of the other options until the best picture is displayed.

♦DNIe: Off/Demo/On

This TV includes the DNIe function so as to provide a high visual quality. If you set DNIe to on, you can view the screen with the DNIe feature activated. If you set the DNIe to Demo, you can view the applied DNIe and normal pictures on the screen, for demonstration purposes. Using this function, you can view the difference in the visual quality.

DNIe™ (Digital Natural Image engine)

This feature brings you more detailed image with 3D noise reduction, detail enhancement, contrast enhancement and white enhancement. New image compensation Algorithm gives brighter, clearer, more detailed image to you. DNIe™ technology will fit every signal into your eyes.

“DNIe” is only available in “Dynamic” mode.

♦HDMI Black Level: Normal/Low

You can select the black level on the screen to adjust the screen depth.

This function is active only when the external input connects to HDMI(RGB signals).

♦Blue Only Mode: Off/On

This function is for AV device measurement experts. This function displays the blue signal only by removing the red and green signals from the video signal so as to provide a Blue Filter effect that is used to adjust the Colour and Tint of video equipment such as DVD players, Home Theaters, etc.

Using this function, you can adjust the Colour and Tint to preferred values appropriate to the signal level of each video device using the Red/Green/Blue/Cyan/Magenta/Yellow Colour Bar Patterns, without using an additional Blue Filter.

“Blue Only Mode” is available when the picture mode is set to “Movie” or “Standard”.

English - 19