User Manual
PicoPix Micro
Mini projector
PPX320
Register your product and get support at
www.philips.com/support
Table of contents
Introduction |
3 |
11 Appendix |
17 |
Dear customer |
3 |
Technical data |
17 |
About this user manual |
3 |
|
|
What’s in the box |
3 |
|
|
Product highlights |
3 |
|
|
1 General safety information 4
Setting up the product 4 Repairs 4 Power supply 5
2 Overview 5
Rear view 5 Side view 6 Remote control 6 Access home menu 6
3 Initial operation 7
Placement 7 Connecting power supply 7 Preparing the remote control 7 Power on and setup 7
4 Connect to playback devices 8
Connecting to devices through HDMI 8
Connecting to external speakers or headphones
9
5 Wireless projection with Android devices 9
6 Wireless projection with iOS devices
10 7 Connect to WiFi network 11 8 Media playback 12
Movie playback 12 Music playback 12 Photo playback 13
9 Change settings 13
10 Service 14
Built-in battery care 14 Cleaning 14 Update software 14 Troubleshooting 15
Introduction
Dear customer
Thank you for purchasing this projector.
We hope you enjoy this product and the many functions it offers!
About this user manual
The quick start guide supplied with this product allows you to start using this product quickly and easily. Detailed descriptions can be found in the following sections of this user manual.
Read the entire user manual carefully. Follow all safety instructions in order to ensure proper operation of this product (see General safety information, page 4). The manufacturer accepts no liability if these instructions are not followed.
Symbols used
Notice Troubleshooting
This symbol indicates tips that will help you in using this product more effectively and easily.
DANGER!
Danger of personal injury!
This symbol gives warning of danger of personal injury. Physical injury or damage can result from improper handling.
CAUTION!
Damage to the product or loss of data!
This symbol gives warning of damage to the product and possible loss of data. Damage can result from improper handling.
What’s in the box
AQuick Start Guide
BPicoPix Micro projector (PPX320)
C3x power plug adapter (EU, UK, US) and 1x power adapter
DTripod
EUSB cable
FRemote control with 2 AAA batteries
a b
Quick Start
Guide
f
c
e d
Product highlights
Connecting to devices with HDMI output
With an HDMI cable, you can connect the projector to a playback device (see Connecting to devices through HDMI, page 8).
Wireless Screen Mirroring (Android and iOS)
With the Wireless Screen Mirroring function, you can share the screen of your smartphone without a cable. In order to allow screen mirroring, your smartphone must support the screen mirroring feature. This projector works with Miracast-compatible Android phones and iPhones with iOS 7/8/9/10 and 11.
Introduction |
3 |
1 General safety information
Take note of all warning and safety notes indicated. Do not make any changes or settings that are not described in this user manual. Incorrect operation, and improper handling can lead to physical injury, damage to the product or loss of data.
Setting up the product
This product is for indoor use only. Place the product securely on a stable, flat surface. To help avoid possible injuries to persons or
damage to the product itself, position all cables in such a way that no one will trip over them.
Do not operate the product in damp rooms. Never touch the mains cable or the mains connection with wet hands.
The product must have sufficient ventilation and must not be covered. Do not put the product in closed cabinets, boxes, or other enclosures when in use.
Protect the product from direct sunlight, heat, intense temperature fluctuations and moisture. Do not place the product in the vicinity of heaters or air conditioners. Observe the information on temperature listed in the technical data (see Technical data, page 17).
Prolonged operation of the product causes the surface to become hot. In case of overheating, the product automatically switches to standby mode.
Do not allow liquids to leak into the product. Turn off the product and disconnect it from the mains supply if liquids or foreign substances leaked into the product. Have the product inspected by an authorised service centre.
Always handle the product with care. Avoid touching the lens. Never place heavy or sharp objects on the product or on the power cable.
If the product gets too hot or emits smoke, shut it down immediately and unplug the power cable. Have your product checked by an authorised service centre. Keep the product away from open flames (e.g. candles).
The product has built-in battery. Do not dissemble and modify. The built-in battery should be replaced by qualified service staff only.
Do not try to replace the built-in battery yourself. Incorrect handling of the battery or using the wrong type of battery can cause damage to the product or cause injury.
DANGER!
Risk of explosion with incorrect type of batteries!
There is a risk of explosion if the wrong battery type is used.
Do not expose the batteries (battery pack or embedded batteries) to excessive heat such as sunshine, or open fire.
Under the following conditions, a layer of moisture can appear inside the product which can lead to malfunctions:
•if the product is moved from a cold to a warm area;
•after a cold room is heated;
•when the product is placed in a damp room.
Proceed as follows to avoid any moisture buildup:
1Seal the product in a plastic bag before moving it to another room, in order for it to adapt to room conditions.
2Wait one to two hours before you take the product out of the plastic bag.
The product should not be used in a very dusty environment. Dust particles and other foreign objects may damage the product.
Do not expose the product to extreme vibrations. This may damage the internal components.
Do not allow children to handle the product without supervision. The packing materials should be kept out of the hands of children.
For your own safety, do not use the product during thunderstorms with lightning.
Repairs
Do not repair the product yourself. Improper maintenance can result in injuries or damage to the product. The product must be repaired by an authorised service centre.
Please find the details of authorised service centres on the warranty card supplied with this product.
Do not remove the type label from this product, as this will void the warranty.
4 |
Philips · PicoPix Micro |
Power supply
Use only a power adapter which is certified for this product (see Technical data, page 17). Check whether the mains voltage of the power supply matches the mains voltage available at the setup location. This product complies with the voltage type specified on the product.
The power outlet shall be installed near the product and shall be easily accessible.
The capacity of the built-in battery diminishes with time. If the product functions only with AC power supply, the built-in battery is defective.
Contact an authorised service centre to replace the built-in battery.
CAUTION!
Always use the 
button to turn the projector off.
Turn off the product and unplug from the power outlet before cleaning the surface (see Cleaning, page 14). Use a soft, lint-
free cloth. Never use liquid, gaseous or easily flammable cleaners (sprays, abrasives, polishes, alcohol). Do not allow any moisture to reach the interior of the product.
DANGER!
Risk of eye irritation!
This product is equipped with a high power LED (Light Emitting Diode), which emits very bright light. Do not look directly into the projector lens during operation. This could cause eye irritation or damage.
2 Overview
Rear view
a b c d e
USB |
HDMI |
|
h g f
AReset key
Reset the projector to the factory default settings (use a small pin to press the reset key).
BIR sensor
CMicro USB port
Connect to the power supply.
D
3.5 mm audio output; connect to external speakers or headphones.
EMini HDMI port
Connect to the HDMI output on a playback device.
F
• Press and hold three seconds to switch the projector on or off.
• Confirm a selection or entry.
• Pause and resume play during media play.
• When the projector is switched on, the LED turns blue. When the projector is switched off, the LED turns off.
• When charging the projector, the LED turns red regardless of the projector switching on or off.
G
/
• Navigate menu options.
• Press and hold to increase or decrease volume.
H
Return to a previous menu screen.
Overview |
5 |
Side view
a
AFocus adjustment knob
Adjust image sharpness.
Remote control
h
a
b
g
OK
c f
d 
e
A 
Access the settings menu.
B 
Confirm a selection or entry.
C 
Access the home menu.
D 
Mute or restore volume.
E 
/
Increase or decrease volume.
F 
Return to a previous menu screen.
GNavigation buttons
•Navigate menu options.
•Press 
/
to change a selection.
H
•Press and hold for one second to switch the projector on or off.
•When the projector is switched on, the LED turns blue. When the projector is switched off, the LED turns off.
•When charging the projector, the LED turns red regardless of the projector switching on or off.
Access home menu
The home menu provides easy access to system setup and other useful features in the projector.
1Turn on the projector. The home menu is displayed.
•Or when the projector is in operation, press 
to display the home menu.
2Press the Navigation buttons and OK to select the following.
•Screen Mirroring: Access screen mirroring function for iPhone and Android device.
•Media Player: Access media players for photo, music and video.
•Settings & Preferences: Access menus to change settings on the projector.
6 |
Philips · PicoPix Micro |
Loading...