HQ-C888
Hairclipper
HQ-C888
Philips Domestic Appliances and Personal Care
Service Manual
SAP coding: HQC888
PRODUCT INFORMATION
General description:
The Philishave ProStyler HQ-C888 is especially designed for men who want to choose their own personal style but do not accept
any compromise on end results. Its unique and NEW 3D -technology enables men to perfectly create their own individual style.
Materials used:
- housing : ABS
- combs : PA / PC
- others : PA / POM / PP / SAN / SEBS / steel
Features:
Lubrication for life - Maintenance free cutting unit ensures consistent high performance
3D rounded teeth - For ultimate skin protection
Prcision Zoom Lock with
15 lenghts settings (1-41 mm) - 2 guide combs are included
Styler set - Styling comb, cleaning brush, scissors, cape
Interactive CD rom - The ultimate interactive way to help you style your hair (not available as spare)
Protective hard case - Durable hard case for safe storage or travel
Published by Philips Domestic Appliances and Personal Care Printed in the Netherlands © Copyright reserved Subject to modification
03/03
TECHNICAL INFORMATION & DISASSEMBLY ADVISE
HQ-C888
Power supply - Rechargeable and corded (RC/AC)
Charging time - 10 h
Cordless operation time - 50 min
Adapter
primary (EU) - 220-240 V - 50/60 Hz
secondary (EU) - 1,3 V - 1500 mA
primary (CDN / USA) - 120 V - 60 Hz
secondary (CDN / USA) - 1,3 V - 1500 mA
Dimensions F-box - 20,5 x 9,1 x 24,0 cm
Weight F-box - 1,3 kg
Weight product (with comb) - 154 g
Product meets the requirements regarding interference
suppression on radio and TV.
Never use again a deformed housing clamp (4).
After the product has been repaired, it should function
properly and has to meet the safety requirements as laid
down and offi cally established at this moment.
NOTES :
• In order to guarantee the longest possible
workinglife of the battery:
- do not charge for more than 24 hours
- do not keep the charging unit permanently
plugged in
- discharge the battery completely once a year by
letting the motor run until it stops
• The appliance should be charged again, when not
used for a long period
TO OPEN THE APPLIANCE:
Remove COMB (1 or 2)
CUTTER (3)
SCREWS (Z)
Z
Z
Remove HOUSING CLAMP (4)
TILTHOUSING (5)
COMBHOLDER (6)
Turn the zoomring (7), till the combholder (6) is on its highest position.
After that, go on turning the zoomring
(7), with a little bit more force, till the
combholder (6) comes out of his seat.
Remove ZOOMRING (7)
ZOOMRING SPRING (8)
open HOUSING PARTS (9)
Could fall down !
Note:
When you are opening the housing parts (9), you have to order them new, because of breaking snap hooks. Also you have
to use the LED insert (X), switch lever (Y), on/off knob (11) and the panel (10) from the old housing parts, because a new
ordered housing set (9) comes without above mentioned parts.
2-4
Loading...