Battery Shaver ”Marco Polo”
Service
Service
Service
HQ 304/A
Domestic Appliances and Personal Care
SAP Coding HQ 304
HINTS FOR REPAIRS
DISASSEMBLY
-Remove the shaving unit, to prevent damages during repairs.
-Remove the batterieholder.
-Unlock the snaplocks from the tailpart.
-Lift the motor unit out of the housing.
-Loosen the motor clamp springs on the bearing. block of the motor with a small screwdriver.
-Unlock the peg-clamping ’Z’ (2X) between frame (item 8) and hair chamber (item 5).
-To remove the trimmer, first disassemble the trimmer slide by pushing down the locking pegs ’V’ (2X) and move slide slightly outwards.
-Maken room between trimmer and cover with a small screwdriver, to release the peg fastening ’Y’.
SK1
+
A
3X1.5V M LR6
TECHNICAL DATA
|
Operating voltage |
: |
4.5V |
|
|
|
|
|
|||||
ASSEMBLY |
Power supply |
: |
3X AA/LR6 battery |
|||
Shaving heads |
: |
2X HQ3 |
||||
|
||||||
- The assembly must be carried out in the reverse |
Comfort control |
: |
fixed setting |
|||
Trimmer |
: |
pop-up system |
||||
order of what is discribed under Disassembly. |
||||||
|
|
|
|
|
||
- When fitting the shaver it must be checked if |
|
|
|
|
|
|
wiring is correctly positioned. |
|
|
|
|
|
PRODUCTS MEETS THE REQUIREMENTS REGARDING
INTERFERENCE SUPPRESION ON RADIO AND TELEVISION.
-AFTER THE PRODUCT HAS BEEN REPAIRED IT SHOULD FUNCTION PROPERLY AND HAS TO MEET THE SAFETY REQUIREMENTS AS LAID DOWN OFFICIALLY ESTABLISHED AT THIS MOMENT.
Published by Philips Domestic Appliances and Personal Care Printed in The Netherlands © Copyright reserved Subject to modification
4322 277 00108
02/09