Shaver
HQ6844
Easy Shave
Philips Domestic Appliances and Personal Care
Service Manual
PRODUCT INFORMATION
Shaving system
-3-dimentional contour following system
-Lift & Cut system
-Individually floating heads
-Three Super Reflex Action shavingheads HQ55
-Silent power
-Hair collecting chamber
Power system
-Rechargeable
-Mains operation possible
-1 hour charge time
-Up to 30 minutes cordless shaving time
-Quick charge in 6 minutes for 1 cordless shave
-World-wide automatic voltage selection
Features
-Travel pouch
-Pop-up trimmer
Luxe
****
Safety information
-This product meets the requirements regarding interference suppression on radio and TV.
-After the product has been repaired, it should function properly and has to meet the safety requirements as officially laid down at this moment.
TECHNICAL INFORMATION
- |
Voltage |
: |
100-240 V AC 50-60 Hz |
- |
Power consumption |
: |
Motor depending |
- |
Motor Voltage |
: |
1,2 V |
- |
Power system |
: |
Rechargeable |
|
|
: |
corded operation possible |
- |
Shaving heads |
: |
HQ55 - 4222 036 08370 |
- |
Charging indication |
: |
1 led green |
- |
Battery fow indication : |
1 led red |
|
- SAP coding |
: |
HQ6844 |
DISASSEMBLYAND RE-ASSEMBLY ADVISE
-Remove shaving unit, to prevent damages during repairs.
-Remove the screws A1 (2x).
-Remove cover. (See Fig. 1)
-To remove the trimmer, first disassemble the trimmer slide by pushing down the locking pegs (2 x “X” in exploded view) and move the slide slightly outwards.
- Make room between trimmer
and cover with a small screwdriver (“Y” in exploded view).
- Remove screws B1 (2 x). - The PC-board with motor and
hairchamber can now be removed from the housing.
-Detach the motor clamping springs (item 17) on the bearing block with a small screwdriver
REPAIR INSTRUCTION
- No specific issues
OPTIONAL (accessories)
- Pouch - 4222 036 05740
Published by Philips Domestic Appliances and Personal Care |
Printed in the Netherlands |
© Copyright reserved |
Subject to modification |
04/06