C E I L I N G - M O U N T E D S P E A K E R S
PUBLIC ADDRESS
RAMSA
Flush-Mounted |
Speaker Panels |
Speaker Volume Controllers |
|
Ceiling Mount Speaker |
WS-TP10E |
WZ-VC106E/F |
|
WS-TN13E |
|||
|
(0.5 W ~ 6 W) |
||
|
|
||
|
|
WZ-VC130E/F |
|
|
WS-TP12E |
(0.5 W ~ 30 W) |
|
|
WZ-VC160E/F |
||
|
|
(0.5 W ~ 60 W) |
|
|
WS-TP13E |
|
|
|
WS-TP14E |
|
Ceiling-Mounted Speaker
Conventional ceiling-mounted speaker
Speaker Speaker
Sound level is |
|
too low to hear. |
|
Sound is too |
|
loud to hear. |
|
WS-TN13E |
Tone quality and level are almost flat. |
Speaker |
Speaker |
Tone level and quality are even whether in a position directly under or away from the speaker.
Pursuing uniformity of tone quality
A special diffuser radiates sound in both the downward and horizontal directions. While optimizing the sound level directly under the speaker, the diffuser delivers sufficient sound levels in the higher frequencies to positions away from the speaker, thus ensuring the delivery of clear sound.
Simple, easy installation
Wide-directional design is employed to cover a wide area with
SPECIFICATIONS
Model No. |
WS-TN13E |
Standard Inputs |
6 W, 3 W, 1 W |
Input Impedance |
1.67 kΩ, 3.3 kΩ, 10 kΩ, |
Sound Pressure Level* |
94 dB (1 m/ 1 W) |
Frequency Response |
120 Hz -15 kHz |
Speaker Type |
12 cm cone speaker |
Operating Temperature Range |
–20˚C to +50˚C |
Dimensions |
134 mm (W) x 215.5 mm (H) x 88.5 mm (Internal Component Height) |
Weight (approx.) |
600 g |
Required Opening |
ø150 mm - 160 mm |
Finish |
Black polystyrene |
*Output level is defined in accordance with JISC5531 and differs from the security warning (Signal No. 2) level.
a small number of speaker units, thus ensuring cost reductions during installation work. Furthermore, quick connection terminals are employed, ensuring one-touch connection of cables without using any tools. The speaker panel (option) is of a spring type, and all you have to do is to hang it in the desired place.
Economical efficiency during remodeling
When remodeling your shop, you can change the interior atmosphere just by replacing the speaker panels.
Speaker Volume Controllers
•6 W/30 W/60 W transformer type. Broad wattage range adapts flexibly to wattage fluctuations while work is underway.
•5-level sound volume adjustment. Addition of –18 dB level allows use in quieter environments.
•One-touch snap on insulator. For easier connecting and insulation.
•Equipped with protective back cover to provide a safer working environment.
•Uses one-touch snap on terminals equipped with release buttons.
* Requires solid copper wire cabling ø0.8 mm - ø1.6 mm.
SPECIFICATIONS
Model No. |
WZ-VC106E/F |
WZ-VC130E/F |
WZ-VC160E/F |
Standard Inputs |
0.5 W - 6 W |
0.5 W - 30 W |
0.5 W - 60 W |
Input Impedance |
20 kΩ - 1.67 kΩ |
20 kΩ - 330 Ω |
20 kΩ - 167 Ω |
Volume Adjustment |
5-level: OFF, 1 (–18 dB), 2 (–12 dB), 3 (–6 dB), 4 (0 dB) reduction |
||
Dimensions |
70 mm (W) x 120 mm (H) x 49 mm (D) |
|
|
Weight (approx.) |
210 g |
|
|
Finish |
Milk White Plate: Aluminum brushed finish |
|
SPECIFICATIONS
Model No. |
WS-TP10E |
WS-TP12E |
WS-TP13E |
WS-TP14E |
|
Dimensions |
ø180 x 10.5 mm |
|
|
|
|
|
(Exposed height) |
8.5 mm |
|
|
|
Weight (approx.) |
60 g |
75 g |
70 g |
80 g |
|
Finish |
Integrated PP |
Frame: ABS resin |
Frame: ABS resin |
Frame: Aluminum frame |
|
|
|
Integrated white (Munsell 10Y9/1) |
Integrated white (Munsell 10Y9/1) |
Integrated white (Munsell 10Y9/1) |
Base color: Satin finish |
|
|
|
Net: Punched aluminum |
Net: Expanded metal net |
Net: Punched aluminum |
|
|
|
Integrated white (Munsell 10Y9/1) |
Integrated white (Munsell 10Y9/1) |
AV ivory (Munsell 7.9Y6.8/0.8) |