Panasonic WJ-RT416 Specification

0 (0)
Panasonic WJ-RT416 Specification

16CH Real-Time MPEG-4 Digital Disk Recorder

Version 1.3 WJ-RT416 Series

 

 

WJ-RT416 (120 V AC)

 

WJ-RT416 (220 ~ 240 V AC)

 

 

<With 1x 250GB HDD>

 

<With 1x 250GB HDD>

 

 

WJ-RT416K (120 V AC)

 

WJ-RT416K (220 ~ 240 V AC)

 

 

<Without HDD>

 

<Without HDD>

 

 

WJ-RT416V (120 V AC)

 

WJ-RT416V (220 ~ 240 V AC)

 

 

<With DVD drive, 1x 250GB HDD>

 

<With DVD drive, 1x 250GB HDD>

 

 

WJ-RT416VK (120 V AC)

 

WJ-RT416VK (220 ~ 240 V AC)

 

 

<With DVD drive, without HDD>

 

<With DVD drive, without HDD>

 

 

 

 

 

16CH Real-Time MPEG-4 Digital Disk Recorder supporting 480 ips (NTSC) / 400 ips (PAL)

Key Features

Equipped with 8 Dual Core Encoders, all 16 cameras can be recorded at 30 ips (NTSC) / 25 ips (PAL) per channel.

MPEG-4: High quality and high compression technology for economical recording.

Supports multiplexed video and control data over the coax (4ch default, additional 4ch by optional board WV-PB4164) and RS-485 camera control (channel 1 ~ 16).

Panasonic camera control: Pan/Tilt, Zoom, Focus, Iris, Preset Position, Auto mode (depends on the camera model) with a system controller, the monitoring software or the web browser*.

Various recording modes: Manual, Timer, Event (Pre/Post)

Flexible recording/playback controls: REC, PLAY, Pause, Stop, FF, REW, Prev Record, Next Record

Various display modes: 4 / 6 / 9 / 16 split screen display (Live)

Sixteen alarm inputs and four alarm outputs.

Synchronized audio recording for 16 channels.

Direct Search and List Search (Time & Date, Event Type, Camera number).

Alarm notification via e-mail.

Three user levels: Manager, Operator and Viewer

Camera partitioning setting can be applied to each user level.

Built-in Video Motion Detector: Mask area: 24 x 20, Sensitivity: 01 ~ 99

Recorded image data can be copied to CD-R, DVD-R, DVD+R, USB memory (FAT32), USB HDD (FAT32) via COPY interface (Specified model only) or DVD-R, CD-R via internal DVD drive (WJ-RT416V), Viewer software can be included when copying.

A maximum of 3 TB (6x 500 GB, WJ-RT416) or 2.5 TB (5x 500 GB, WJ-RT416V) hard disk drives can be installed.

HDD Safety Mode to protect HDDs during installation.

Optional WV-CU650 or WV-CU950 system controllers can be connected (RS-485). Playback speed can be controlled by Jog/Shuttle. Direct camera preset position program is also available.

Integration capability with System150*2 or System650*3: System controllers connected to System150/650 can control WJ-RT416. Cameras connected to System150/650 can be controlled from the monitoring software (RT4client) or the web browser*.

Built-in network interfaces (10Base-T / 100Base-TX) for remote monitoring and operation.

Multi-recorder, Multi-site system can be made with the provided monitoring software (RT4client).

Recorded video and audio data can be downloaded to the client PC with the monitoring software or the web browser*.

Up to 16 network clients can monitor live spot images (total network video stream is 16, Refresh rate depends on the number of streams, recording mode and playback mode).

Up to four playback streams can be sent to the network.

Selectable Unicast/Multicast for efficient network utilization.

The viewer software can convert recorded audio and video data into Windows Media-format, and also can extract audio to wav file.

* Available from version 1.4, *2 System150 version 2.2 or later. *3 System650 version 3.0 or later.

Standard Accessories

......................................• CD-ROM*

1 pc.

The followings are for installation.

 

• Installation Guide ..........................

1 pc.

• Power cable (for NTSC model) .....

1 pc.

* The followings are included on the CD-ROM.

• Power cable (for PAL model) .....

2 pcs.

• Operating instructions of the monitoring software (PDF)

• HDD mounting screws, sleeves, dampers

• Monitoring software (RT4client, including the viewer software)

• Rack mounting brackets

2 pcs.

 

 

 

 

• Fixing screw for rack mounting brackets...

8 pcs.

 

 

 

 

Optional Accessory

4CH Camera Control Board

WV-PB4164

Part Names and Functions

Front View

 

 

 

 

COPY2

 

 

Inside the cover

Error Indicator

Camera Selection Buttons

Play/Pause Button

Alarm Indicator

Setup Button

Record/Record Stop Button

Timer Indicator

Search Button

Fast Reverse Playback Button

Operate Indicator

Copy Button

Fast Forward Playback Button

HDD Access Indicators

Arrow Button

Skip Buttons

Sequence Button

Escape Button

Copy 2 Port

Multi-screen Button

Set Button

Internal CD/DVD drive

Alarm Reset Button

Stop Button

(Only for the WJ-RT416V)

Rear View

 

 

Audio Output Connector

Mode Switch

Audio Input Connectors

AUX Input Connector

Network Port

Signal Ground Terminal

Monitor 1 Connector

Copy 1 Port

Power Button

Serial Terminal

Audio Input/

Cooling Fan

Monitor 2 Terminal

Alarm Output Terminal

Power Cord Inlet

RS-485 Port

Alarm Input/

Video Input Connectors/

Data Port

Control Terminal

Video Output Connectors

Loading...
+ 1 hidden pages