Operating Instructions
Color CCTV Camera
Model No. WV-CW334S, WV-CW334SE
WV-CW364S, WV-CW364SE
Before attempting to connect or operate this product, please read these instructions carefully and save this manual for future use.
The model number is abbreviated in some descriptions in this manual.
WARNING:
•This apparatus must be earthed.
•Apparatus shall be connected to a mains socket outlet with a protective earthing connection.
•The mains plug or an appliance coupler shall remain readily operable.
•All work related to the installation of this product should be made by qualified service personnel or system installers.
•For PERMANENTLY CONNECTED
APPARATUS provided neither with an all-pole MAINS SWITCH nor an all-all pole circuit breaker, the installation shall be carried out in accordance with all applicable installation rules.
•The connections should comply with local electrical code.
CAUTION
RISK OF ELECTRIC
SHOCK DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.
For U.S. and Canada:
WV-CW334S, WV-CW364S
For Europe and other countries:
WV-CW334SE, WV-CW364SE
UL listed model No.:
WV-CW334S, WV-CW364S
For Canada
This Class A digital apparatus complies with Canadian ICES-003.
For U.S.A.
NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.
FCC Caution: To assure continued compliance, (example - use only shielded interface cables when connecting to computer or peripheral devices). Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.
For U.S.A.
The model number and serial number of this product may be found on the surface of the unit.
You should note the model number and serial number of this unit in the space provided and retain this book as a permanent record of your purchase to aid identification in the event of theft.
Model No.
Serial No.
2
CAUTION:
An ALL-POLE MAINS SWITCH with a contact separation of at least 3 mm in each pole shall be incorporated in the electrical installation of the building.
Turn the power off at the mains to disconnect the main power for all unit.
FOR YOUR SAFETY PLEASE READ THE FOLLOWING TEXT CAREFULLY.
WARNING: This apparatus must be earthed.
IMPORTANT
The wires in this mains lead are coloured in accor-
dance with the following code. |
|
Green-and-yellow: |
Earth |
Blue: |
Neutral |
Brown: |
Live |
As the colours of the wire in the mains lead of this appliance may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows.
The wire which is coloured green-and-yellow must be connected to the terminal in the plug which is marked with the letter E or by the earth symbol I or coloured green or green-and-yellow.
The wire which is coloured blue must be connected to the terminal in the plug which is marked with the letter N or coloured black.
The wire which is coloured brown must be connected to the terminal in the plug which is marked with the letter L or coloured red.
We declare under our sole responsibility that the product to which this declaration relates is in conformity with the standards or other normative documents following the provisions of Directives 2006/95/EC and 2004/108/EC.
Wir erklären in alleiniger Verantwortung, daß das Produkt, auf das sich diese Erklärung bezieht, mit den folgenden Normen oder normativen Dokumenten übereinstimmt. Gemäß den Bestimmungen der Richtlinie 2006/95/EC und 2004/108/EC.
Nous déclarons sous notre propre responsabilité que le produit auquel se réfère la présente déclaration est conforme aux normes spécifiées ou à tout autre document normatif conformément aux dispositions des directives 2006/95/CE et 2004/108/CE.
Nosotros declaramos bajo nuestra única responsabilidad que el producto a que hace referencia esta declaración está conforme con las normas u otros documentos normativos siguiendo las estipulaciones de las directivas 2006/95/CE y 2004/108/CE.
Noi dichiariamo sotto nostra esclusiva responsabilità che il prodotto a cui si riferisce la presente dichiarazione risulta conforme ai seguenti standard o altri documenti normativi conformi alle disposizioni delle direttive 2006/95/CE e 2004/108/CE.
Wij verklaren als enige aansprakelijke, dat het product waarop deze verklaring betrekking heeft, voldoet aan de volgende normen of andere normatieve documenten, overeenkomstig de bepalingen van Richtlijnen 2006/95/ EC en 2004/108/EC.
Vi erklærer os eneansvarlige for, at dette produkt, som denne deklaration omhandler, er i overensstemmelse med standarder eller andre normative dokumenter i følge bestemmelserne i direktivene 2006/95/EC og 2004/108/ EC.
Vi deklarerar härmed vårt fulla ansvar för att den produkt till vilken denna deklaration hänvisar är i överensstämmelse med de standarder eller andra normativa dokument som framställs i direktiv nr 2006/95/ EC och 2004/108/EC.
Ilmoitamme yksinomaisella vastuullamme, että tuote, jota tämä ilmoitus koskee, noudattaa seuraavia standardeja tai muita ohjeellisia asiakirjoja, jotka noudattavat direktiivien 2006/95/EC ja 2004/108/EC säädöksiä.
Vi erklærer oss alene ansvarlige for at produktet som denne erklæringen gjelder for, er i overensstemmelse med følgende normer eller andre normgivende dokumenter som følger bestemmelsene i direktivene 2006/95/EC og 2004/108/EC.
3
Important safety instructions
1)Read these instructions.
2)Keep these instructions.
3)Heed all warnings.
4)Follow all instructions.
5)Clean only with dry cloth.
6)Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.
7)Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
8)Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
9)Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
10)Only use attachments/accessories specified by the manufacturer.
11)Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
S3125A
12) Unplug this apparatus during lightning storms or when unused for long periods of time.
4
Limitation of liability
THIS PUBLICATION IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR ANY PARTICULAR PURPOSE, OR NON-INFRINGEMENT OF THE THIRD PARTY'S RIGHT.
THIS PUBLICATION COULD INCLUDE TECHNICAL INACCURACIES OR TYPOGRAPHICAL ERRORS. CHANGES ARE ADDED TO THE INFORMATION HEREIN, AT ANY TIME, FOR THE IMPROVEMENTS OF THIS PUBLICATION AND/OR THE CORRESPONDING PRODUCT (S).
Disclaimer of warranty
IN NO EVENT SHALL Panasonic System Networks Co., Ltd. BE LIABLE TO ANY PARTY OR ANY PERSON, EXCEPT FOR REPLACEMENT OR REASONABLE MAINTENANCE OF THE PRODUCT, FOR THE CASES, INCLUDING BUT NOT LIMITED TO BELOW:
(1)ANY DAMAGE AND LOSS, INCLUDING WITHOUT LIMITATION, DIRECT OR INDIRECT, SPECIAL, CONSEQUENTIAL OR EXEMPLARY, ARISING OUT OF OR RELATING TO THE PRODUCT;
(2)PERSONAL INJURY OR ANY DAMAGE CAUSED BY INAPPROPRIATE USE OR NEGLIGENT OPERATION OF THE USER;
(3)UNAUTHORIZED DISASSEMBLE, REPAIR OR MODIFICATION OF THE PRODUCT BY THE USER;
(4)INCONVENIENCE OR ANY LOSS ARISING WHEN IMAGES ARE NOT DISPLAYED, DUE TO ANY REASON OR CAUSE INCLUDING ANY FAILURE OR PROBLEM OF THE PRODUCT;
(5)ANY PROBLEM, CONSEQUENTIAL INCONVENIENCE, OR LOSS OR DAMAGE, ARISING OUT OF THE SYSTEM COMBINED BY THE DEVICES OF THIRD PARTY;
(6)ANY CLAIM OR ACTION FOR DAMAGES, BROUGHT BY ANY PERSON OR ORGANIZATION BEING A PHOTOGENIC SUBJECT, DUE TO VIOLATION OF PRIVACY WITH THE RESULT OF THAT SURVEILLANCE-CAMERA'S PICTURE, INCLUDING SAVED DATA, FOR SOME REASON, BECOMES PUBLIC OR IS USED FOR ANY PURPOSE;
(7)LOSS OF REGISTERED DATA CAUSED BY ANY FAILURE.
5
Contents |
|
Important safety instructions......................................................................................................... |
4 |
Limitation of liability....................................................................................................................... |
5 |
Disclaimer of warranty................................................................................................................... |
5 |
Preface........................................................................................................................................... |
7 |
Features......................................................................................................................................... |
7 |
Precautions.................................................................................................................................... |
8 |
Precautions for installation........................................................................................................... |
10 |
Major operating controls and their functions............................................................................... |
12 |
Preparations................................................................................................................................. |
15 |
Camera installation...................................................................................................................... |
19 |
Make a connection....................................................................................................................... |
28 |
Troubleshooting........................................................................................................................... |
31 |
Specifications............................................................................................................................... |
32 |
Standard accessories.................................................................................................................. |
34 |
Optional accessories................................................................................................................... |
35 |
6
Preface
This product is surveillance color CCTV camera equipped with a 1/3 type CCD solid-state image sensor with 768 horizontal pixels (NTSC), 752 horizontal pixels (PAL).
This camera can be mounted on a ceiling or a wall without any difficulty.
Features
This product is provided with the adaptive black stretch function, high resolution of 540 TV lines (horizontal), and minimum illuminance of 0.6 lx (C/L), 0.05 lx (B/W) for WV-CW364S, 0.4 lx (B/W) for WV-CW334S, (F1.3(WIDE)) thanks to the adoption of the newly developed digital signal processor.
Optional heater unit can be connected
When using the optional heater unit, the product can be used at temperatures within –30 °C to +50 °C {–22 °F to + 122 °F} and humidity below 90 %.
7
Precautions
The following points as well as the contents of "Warning" and "Caution" shall be observed.
Refer installation work to the dealer.
Installation work requires technique and experiences. Otherwise injury, or damage to this product may result.
Be sure to consult the dealer.
Do not insert any foreign objects.
This could permanetly damage this product. Turn the power off immediately and contact qualified service personnel for service.
Do not attempt to disassemble or modify this product.
Failure to observe this may cause fire or electric shock.
Consult the dealer for the repair or inspections.
Stop operation immediately when something is wrong with this product.
When smoke goes up from this product or the smell of smoke comes from this product, continued use will result in fire, injury, or damage to the product.
Turn the power off immediately and contact qualified service personnel for service.
Select an installation area that can support the total weight.
Selecting an inappropriate installation surface may cause the product to fall down or topple over, resulting in injury.
Installation work shall be started after sufficient reinforcement.
Periodic inspections shall be conducted.
Rust on the metal parts or screws may cause the product to fall down resulting in injury or accidents.
Consult the dealer for the inspections.
This product shall be installed in a vibra- tion-free place.
Failure to observe this may cause screws and bolts to be loosened and consequently to fall resulting in injury.
Install this product high enough to ensure that people don't hit their heads.
Failure to observe this may cause a drop resulting in injury or accidents.
Do not strike or give a strong shock to this product.
Failure to observe this may cause injury or fire.
Turn the power off when do wiring of this product.
Failure to observe this may cause electric shock. A short circuit or wrong wiring may cause fire.
Do not use this product in an atmosphere of flammable gases.
Failure to observe this may cause injury by explosion.
Avoid installing this product in locations where it is subject to damage by salt or corrosive gas.
Otherwise the mounting fixtures will deteriorate, causing the product to fall down and leading to accidents.
Use the specified mount bracket.
Failure to observe this may cause a drop resulting in injury or accidents.
Do not rub the edges of metal parts with your hand.
Failure to observe this may cause injury.
Tighten screws and mounting fixtures to the specified torque.
Failure to observe this may cause a drop resulting in injury or accidents.
8
[Precautions for use]
This product has no power switch.
When turning off the power, turn off a circuit breaker.
To keep on using with stable performance
Parts of this product may deteriorate and it may shorten the lifetime of this product when using in locations subject to high temperatures and high humidity. (Recommended operating temperature: +35 °C {95 °F} or lower)
Do not expose this product to direct heat sources such as a heater.
Handle this camera with care.
Do not drop this camera, nor apply shock or vibration to this camera.
Failure to observe this may cause trouble.
Do not touch the dome cover with your bare hands.
A dirty dome cover causes deterioration of picture quality.
Discoloration on the CCD color filter
When continuously shooting a bright light source such as a spotlight, the color filter of the CCD may have deteriorated and it may cause discoloration. Even when changing the fixed shooting direction after continuously shooting a spotlight for a certain period, the discoloration may remain.
Do not aim this product at strong light sources.
A light source such as a spot light causes a blooming (light bleeding) or a smear (vertical lines).
Smear Blight subject
Blooming
Cleaning this product body
Turn the power off when cleaning this product. Do not use strong abrasive detergent when cleaning this product. Otherwise, it may cause discoloration.
9
Precautions for installation
The following points as well as the contents of "Warning" and "Caution" shall be observed.
Panasonic assumes no responsibility for injuries or property damage resulting from failures arising out of improper installation or operation inconsistent with this documentation.
Installation work shall be performed in accordance with the technology standard of the electric installation.
This product is designed to be installed under eaves.
Keep the product out of direct sunlight.
Installing place
Contact your dealer for assistance if you are unsure of an appropriate place in your particular environment.
•Make sure that the installation area is strong enough to hold the product, such as a concrete ceiling.
•Install the camera in the foundation area of the architecture or where sufficient strength is assured.
•If a ceiling board such as plaster board is too weak to support the total weight, the area shall be sufficiently reinforced.
Avoid installing this product in the following locations.
•Locations where a chemical agent is used such as a swimming pool.
•Locations subject to steam and oil smoke such as a kitchen, Locations near flammable gas or vapor.
•Locations where radiation or x-ray emissions are produced.
•Locations where corrosive gas is produced, Locations where it may be damaged by briny air such as seashores.
•Locations where the temperature is not within –10 °C to +50 °C {14 °F to +122 °F}. (When using the optional heater unit, the product can be used at temperatures within –30 °C to +50 °C {–22 °F to +122 °F} and humidity below 90 %.)
•Locations subject to vibrations (This product is not designed for on-vehicle use.)
Avoid moist or dusty places to install this system.
Otherwise, lifetime of the internal parts may be shortened.
Avoid installing the camera in a place with a high level of noise.
Installation near an air conditioner, an air cleaner, a vending machine, or the like causes noise.
Be sure to remove this product if it is not in use.
Keep the camera cable away from the lighting cable.
Failure to observe this may cause noise.
Radio interference
When this product is used near TV/radio antenna, strong electric field or magnetic field (near a motor or a transformer), images may be distorted and noise sound may be produced.
In such a case, run the camera cable through specialized steel conduit tubes.
Locally procure the screws
Screws are not supplied with this product. Prepare the screws according to the material, structure, strength and other factors of the mounting area and the total weight of objects to be mounted.
10
Screw tightening
•The screws and bolts must be tightened with an appropriate tightening torque according to the material and strength of the installation area.
•Do not use an impact driver. Failure to observe this may cause overtightening and consequently damage to the screws.
•When a screw is tightened, make the screw at a right angle to the surface. After tightening the screws or bolts, perform visual check to ensure tightening is enough and there is no backlash.
Do not remove or loosen the screws.
Do not remove or even loosen the screws (7 pieces) on the rear of the camera.
Otherwise, water exposure may cause damage or malfunction of camera, or camera dropping may result in injury.
11
Loading...