Loading...
Colour CCTV Cameras
WV-CP450/WV-CP454
(Lens : option)
Before attempting to connect or operate this product, please read these instructions completely.
ENGLISH VERSION
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION:
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK), NO USER SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
The lightning flash with arrowhead symbol, within an equilateral triangle, is interned to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.
For U.K.
FOR YOUR SAFETY PLEASE READ THE FOLLOWING TEXT CAREFULLY.
WARNING
THIS APPARATUS MUST BE EARTHED
IMPORTANT
The wires in this mains lead are coloured in accordance with the following code.
Green-and-yellow: |
Earth |
Blue: |
Neutral |
Brown: |
Live |
As the colours of the wire in the mains lead of this appliance may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows.
The wire which is coloured green-and-yellow must be connected to the terminal in the plug which is marked with the letter E or by the earth symbol Ior coloured green or green-and-yellow.
The wire which is coloured blue must be connected to the terminal in the plug which is marked with the letter N or coloured black.
The wire which is coloured brown must be connected to the terminal in the plug which is marked with the letter L or coloured red.
The serial number of this product may be found on the top of the unit.
You should note the serial number of this unit in the space provided and retain this book as a permanent record of your purchase to aid identification in the event of theft.
Model No.
Serial No.
WARNING:
TO PREVENT FIRE OR ELECTRIC SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
We declare under our sole responsibility that the product to which this declaration relates is in conformity with the standards or other normative documents following the provisions of Directives EEC/73/23 and EEC/89/336.
Noi dichiariamo sotto nostra esclusiva responsabilità che il prodotto a cui si riferisce la presente dichiarazione risulta conforme ai seguenti standard o altri documenti normativi conformi alle disposizioni delle direttive CEE/73/23 e CEE/89/336.
Wij verklaren als enige aansprakelijke, dat het product waarop deze verklaring betrekking heeft, voldoet aan de volgende normen of andere normatiefve dokumenten, overeenkomstig de bepalingen van Richtlijnen 73/23/EEC en 89/336/EEC.
Vi erklærer os eneansvarlige for, at dette produkt, som denne deklaration omhandler, er i overensstemmelse med den følgende standarder eller andre normative dokumenter i følge bestemmelserne i direktivene 73/23/EEC og 89/336/EEC.
Vi deklarerar härmed värt fulla ansvar för att den produkt till vilken denna deklaration hänvisar är i överensstämmelse med standarddokument, eller andra normativa dokument som framstölls i Direktiv 73/23/EEC och 89/336/EEC.
Ilmoitamme yksinomaisella vastuullamme, että tuote, jota tämä ilmoitus koskee, noudattaa seuraavia standardeja tai muita ohjeellisia asiakirjoja, jotka noudattavat direktiivien 73/23/EEC ia 89/336/EEC. säädöksiä.
Vi erklærer oss alene ansvarlige for at produktet som denne erklæringen gjelder for, er i overensstemmelse med følgende normer eller andre normgivende dokumenter som fælger bestemmelsene i direktiven 73/23/EEC og 89/336/EEC.
ENGLISH
For Australia
THIS APPARATUS MUST BE EARTHED.
To ensure safe operation the three-pin plug supplied must be inserted only into a standard three-pin power point which is effectively earthed through the normal household wiring. Extension cords used with the equipment must be three-core and be correctly wired to provide connection to earth. Wrongly wired extension cords are a major cause of fatalities.
The fact that the equipment operates satisfactorily does not imply that the power point is earthed and that the installation is completely safe. For your safety, if in any doubt about the effective earthing of the power point, consult a qualified electrician.
-1-
CONTENTS |
|
PREFACE ........................................................................................................................................................................ |
3 |
FEATURES ...................................................................................................................................................................... |
3 |
PRECAUTIONS ............................................................................................................................................................... |
4 |
MAJOR OPERATING CONTROLS AND THEIR FUNCTIONS ......................................................................................... |
5 |
CONNECTIONS .............................................................................................................................................................. |
8 |
FOCUS OR BACK FOCAL ADJUSTMENT .................................................................................................................... |
12 |
INSTALLATION OF CAMERA ....................................................................................................................................... |
13 |
SET UP .......................................................................................................................................................................... |
14 |
1. CAMERA SETUP MENU ........................................................................................................................................ |
14 |
2. SETUP OPERATION .............................................................................................................................................. |
16 |
SETTING PROCEDURES .............................................................................................................................................. |
19 |
PREVENTION OF BLOOMING AND SMEAR ................................................................................................................ |
33 |
SPECIFICATIONS ......................................................................................................................................................... |
34 |
STANDARD ACCESSORIES ......................................................................................................................................... |
36 |
OPTIONAL ACCESSORIES .......................................................................................................................................... |
36 |
-2-
PREFACE
Panasonic's WV-CP450 series colour digital camera introduces a new level of high picture quality and high resolution through the use of a 1/3-inch interline transfer CCD image sensor having 752 horizontal pixels
(picture elements), and digital signal processing LSI's. This model offers cutting-edge technology for advanced video surveillance.
FEATURES
1.The following functions are built in.
(1)Auto Light Control (ALC)/Electronic Light Control (ELC)
(2)The SUPER-D function eliminates interference by strong background lighting which makes the camera picture dark, such as a spotlight.
Dynamic range of 40 dB.
(3)Various External Sync Functions, including Gen-Lock
(4)Auto/Manual White Balance Function
(5)Electronic Shutter Function
2.Signal-to-noise ratio of 50 dB
3.Minimum illumination of 3 lux (0.3 footcandle) with F 1.4 lenses.
4.Minimum illumination of 0.9 lux (0.09 footcandle) with Panasonic aspherical high speed (F0.75) lenses.
5.480 lines of horizontal resolution
6.High quality picture:
(a)2H type vertical enhancer for greater picture sharpness
(b)Chroma averaging circuit for better colour signal to noise ratio
(c)Minimum of aliasing on fine objects
(d)Expanded dynamic range by use of knee circuit
(e)Highlight aperture correction for greater picture detail of bright object
7.Ability to shoot indoor scenes with fixed iris lens by use of Electronic Light Control (ELC) function.
-3-
PRECAUTIONS
1.Do not attempt to disassemble the camera.
To prevent electric shock, do not remove screws or covers.
There are no user serviceable parts inside. Ask a qualified service person for servicing.
2.Handle the camera with care.
Do not abuse the camera. Avoid striking, shaking, etc. The camera could be damaged by improper handling or storage.
3.Do not expose the camera to rain or moisture, or try to operate it in wet areas.
Turn the power off immediately and ask a qualified service person for servicing. Moisture can damage the camera and also create the danger of electric shock.
4.Do not use strong or abrasive detergents when cleaning the camera body.
Use a dry cloth to clean the camera when dirty.
In case the dirt is hard to remove, use a mild detergent and wipe gently.
5.Clean the CCD faceplate with care.
Do not clean the CCD with strong or abrasive detergents. Use lens tissue or a cotton tipped applicator and ethanol.
6.Never face the camera towards the sun.
Do not aim the camera at bright objects. Whether the camera is in use or not, never aim it at the sun or other extremely bright objects. Otherwise, blooming or smear may be caused.
7.Do not operate the camera beyond the specified temperature, humidity or power source ratings.
Use the camera under conditions where temperature is between −10°C - +50°C (14°F - 122°F), and
humidity is below 90%. The input power source is 220 - 240V AC 50Hz for WV-CP450 and DC 12V/AC 24V for WV-CP454.
-4-
MAJOR OPERATING CONTROLS AND THEIR FUNCTIONS
MAJOR OPERATING CONTROLS AND THEIR FUNCTIONS
<WV-CP450>
|
POWER |
220 240V AC 50H |
VIDEO OUT |
|
GEN-LOCK |
SUPERDYNAMIC
WV-CP450
<WV-CP454> |
|
|
|
|
POWER |
DC 12V |
AC 24V |
VIDEO OUT |
IN |
IN |
|
Hi-Z G/L 75Ω |
1 |
|
|
|
|
|
2 |
GEN-LOCK |
|
|
|
|
GND |
|
Slide the panel to the left until it locks.
-5-
qAuto Iris Lens Connector
This connector is used to connect with the auto iris lens by a 4-pin male connector that is supplied as a standard accessory (Part No. YFE4191J100).
wBack Focal Adjusting Ring
This ring is used to adjust the back focal length or picture focus. Rotate this ring clockwise for a C- mount lens or counterclockwise for a CS-mount lens.
e Lens (Option)
rCamera Mounting Screw Hole
This hole is used to mount the camera onto a mounting bracket.
tDown Button ( 
)
This button is used to move the cursor downward. It is also used to select items in the CAM SET UP menu.
yRight Button ( 
)
This button is used to move the cursor to the right. It is also selects the mode and can be used to adjust some levels.
-6-
uLeft Button ( 
)
This button is used to move the cursor to the left. It also selects the mode and can be used to adjust some levels.
iUp Button ( 
)
This button is used to move the cursor upward. It is also used to select items in the CAM SET UP menu.
oSet Button ( 
)
This button is used to activate an item selected in the CAM SET UP menu.
!0Gen-lock Termination Switch (Hi-Z, G/L 75Ω)
Set this switch to Hi-Z when a gen-lock video input signal is looped through. In all other cases, set this switch to 75Ω.
!1Power indicator
This indicator lights up when the power of this camera is on.
!2Gen-lock Input Connector (GEN-LOCK)
This connector is used to connect an external system for synchronization.
!3Video Output Connector (VIDEO OUT)
This connector is used to connect with the VIDEO IN connector of the monitor.
!4Power Cord Socket
This socket is used to connect the power cord (supplied as a standard accessory).
!5AC/DC Compatible Input Terminal
(DC 12V IN/AC 24V IN)
This terminal is for connecting the 12 V DC or 24 V AC power supply cord.
Caution:
Connect to 12V DC (10.5V-16V) or 24V AC (19.5V-28V) class 2 power supply only. Make sure to connect the grounding lead to the GND terminal when the power is supplied from a 24V AC power source.
-7-
CONNECTIONS
A.WV-CP450 (220 - 240V AC 50Hz)
1.Connect the AC power cord (supplied as standard accessory) to the power cord socket of the camera.
2.Connect the AC power cord to an electrical outlet
of 220 - 240V AC 50 Hz.
Notes:
•Connect the power cord firmly.
•The power cord should be long enough for panning and tilting.
If the cable is too short, the power cord plug may be pulled off the camera when the camera pans or tilts.
B.WV-CP454 (12V DC/24V AC)
The WV-CP454 has an AC/DC compatible input terminal. The 12V DC or 24V AC power supply cord can be connected to this terminal. The camera detects the power source automatically.
1. 12 V DC Power Supply |
DC 12V |
AC 24V |
|
Connect the power cord to |
IN |
IN |
|
|
1 |
|
|
the AC/DC compatible |
|
|
|
|
|
|
|
input terminal on the rear |
|
2 |
|
|
|
12 VDC |
|
panel of the camera. |
|
GND |
|
|
(10.5 V - 16 V) |
||
|
|
|
Resistance of copper wire [at 20°C (68°F)]
Copper wire |
#24 |
#22 |
#20 |
#18 |
size (AWG) |
(0.22mm2) |
(0.33mm2) |
(0.52mm2) |
(0.83mm2) |
|
|
|
|
|
Resistance |
0.078 |
0.050 |
0.030 |
0.018 |
Ω/m |
|
|
|
|
|
|
|
|
|
Resistance |
0.026 |
0.017 |
0.010 |
0.006 |
Ω/ft |
|
|
|
|
|
|
|
|
|
•Calculation method of maximum cable length between camera and power supply.
10.5V DC ≤ VA − (R x 0.42 x L) ≤ 16V DC
L : Cable length (meter)
R : Resistance of copper wire (Ω/meter)
VA : DC output voltage of power supply unit
|
|
VA − 12 |
|||
L standard = |
|
|
|
|
(meters) |
|
|
||||
|
|
0.42 x R |
|||
|
|
VA − 16 |
|||
L minimum = |
|
|
|
|
(meters) |
|
|
0.42 x R |
|||
|
VA − 10.5 |
||||
L maximum = |
|
|
|
|
(meters) |
|
|
0.42 x R |
|||
-8-
2.24 V AC Power Supply
Connect the power cable to the AC/DC compatible input terminal on the rear panel of the camera.
DC 12V |
AC 24V |
|
IN |
IN |
|
|
1 |
|
|
2 |
|
|
GND |
24 VAC, 50 Hz |
|
|
(19.5 V - 28 V) |
Recommended wire gauge sizes for 24V AC line.
Copper wire |
|
#24 |
#22 |
#20 |
#18 |
|
size (AWG) |
|
(0.22mm2) |
(0.33mm2) |
(0.52mm2) |
(0.83mm2) |
|
|
|
|
|
|
|
|
Length |
|
(m) |
95 |
150 |
255 |
425 |
of Cable |
|
|
|
|
|
|
|
|
|
|
|
|
|
(Approx.) |
|
(ft) |
314 |
495 |
842 |
1 403 |
|
|
|
|
|
|
|
Video Cable
1.It is recommended to use a monitor whose resolution is at least equal to that of the camera.
2.Set the termination switch to the 75Ω position on the last monitor.
A.Use a 75Ω coaxial cable.
B.Set the termination switch to the 75Ω position on the last monitor and to the Hi-Z position on the other monitors. Do not change the positions after setting.
|
Monitor |
|
Monitor |
|
VIDEO |
|
VIDEO |
IN |
OUT 75Ω |
IN |
OUT 75Ω |
|
Hi-Z |
|
Hi-Z |
C.The maximum extensible coaxial cable length between the camera and the monitor is shown below.
-9-
Loading...