PHOTOELECTRIC SENSOR
ULTRA-COMPACT
PHOTOELECTRIC SENSOR Amplifier Built-in
EX SERIES
Lineup
Conforming to |
UL Recognition |
EMC Directive |
Amplifier Built-in in this size!
*1 |
*1 |
*1 |
Volume ratio |
Volume ratio |
Volume ratio |
1/ |
1/ |
1/ |
13 |
5 |
6 |
approx. |
approx. |
approx. |
approx. |
approx. |
approx. |
|
*2 |
|
|
|
|
|
Industry’s |
Mountable with |
Single-point |
||
Standard photoelectric sensor |
slimmest! |
M3 screws! |
tightening! |
||
EX-10 series |
EX-20 series |
EX-30 series |
|||
CX-400 series |
|||||
|
|
|
|
||
|
|
|
*1 |
Comparison with CX-400 |
|
|
|
|
*2 |
As of November 2005 and based |
|
|
|
|
|
on research conducted by SUNX. |
|
For questions about cautions, dimensions, etc.
http://www.sunx.co.jp/
Ultra-slim Photoelectric Sensor Amplifier Built-in
EX-10SERIES |
|
|
UL Recognition |
For questions about cautions, dimensions, etc. |
Conforming to EMC Directive |
|
|||
|
|
|||
(Excluding EX-15 /17 ) |
|
(Excluding 5 m cable length type) |
SUNX website: http://www.sunx.co.jp/ |
|
|
|
|
Industry’s slimmest! *
*As of November 2005 and based on research conducted by SUNX.
3.5 mm 0.138 in
thick
10 mm 0.394 in
14.5 mm
0.571 in
High-speed response time: 0.5 ms
The sensor is suitable for detecting small and highspeed traveling objects.
Smallest body,
just 3.5 mm 0.138 in thick
It can be mounted in a very small space as its size is just W10 H14.5 D3.5 mm W0.394 H0.571 D0.138 in (thru-beam, front sensing type).
Long-range sensing even with compact size |
EX-19 |
Long-range sensing is possible, even with an ultra-slim body that is 3.5 mm 0.138 in thin.
|
1,000 mm |
|
39.370 in |
EX-19B |
max. |
Bright 2-color indicator
A convenient 2-color indicator has been incorporated in the miniature body.
2-color indicator
Red: Operation indicator
Green: Stability indicator
Operation mode switch |
EX-15 /17 |
Increased bending durability |
EX- -R |
Thru-beam type sensor incorporated with an operation mode switch on the bifurcation is also available. It helps you to test the operability before start-up.
A flexible cable type with greatly improved bending durability compared to previous types is available. It is ideal for moving parts such as robot arms.
1
Ultra-compact Photoelectric Sensor Amplifier Built-in
EX-20SERIES |
|
|
UL Recognition |
For questions about cautions, dimensions, etc. |
Conforming to |
|
|||
|
|
|||
EMC Directive |
|
(Excluding 5 m cable length type) |
SUNX website: http://www.sunx.co.jp/ |
|
|
|
|
Mountable with M3 screws & Incorporates a sensitivity adjuster even in this size
M3 screws
Sensitivity adjuster
It can be tightened with M3 screws.
Metal sleeve inserts have been provided in the mounting holes so that the product is not damaged even in case of excess tightening.
Miniaturization by using single chip optical IC
The beam-receiving photodiode and the A/D conversion circuit have been fabricated on a single chip optical IC (full custom). Hence, in spite of its miniature size, it has a performance and reliability which is equal to or better than the conventional product.
10.5 mm |
8.2 mm |
|
0.323 in |
||
0.413 in |
||
|
19 mm
0.748 in
Miniatur-
zation
Long sensing range
The EX-20 series achieves long distance sensing [thru-beam type: 2 m 6.562 ft, retroreflective type: 200 mm 7.874 in (when using the attached reflector), diffuse reflective type: 160 mm 6.299 in], despite its miniature size.
Hence, it is usable even on a wide conveyor.
2,000 mm
78.740 in max.
Out of position
EX-23
Spots can be seen clearly
A red LED dot light source is used to cast
a red spot beam so that the sensing EX-28 position can be checked easily.
High- |
Setting |
||
distance: |
|||
luminance |
|||
80 mm |
|||
spot |
|||
3.150 in |
|||
|
|
||
|
"5 mm |
|
|
|
"0.197 in |
|
|
EX-26 |
|
||
spot |
|
||
"1 mm
"0.039 in spot
Setting distance: 10 mm 0.394 in
2
Loading...