Desk Lamp
Operation and Safety Notes
6
Z31285A-BS
Z31285B-BS
Z31285C-BS
GB / IE Operation and Safety Notes Page 4
A
11
10
12 1 2 3a
9
3b
4
5
6
7
8
B
150°
75°
3a
5°
3b
3
Desk Lamp
Q
Proper use
Model:
Z31285A-BS (silver, matt)
Z31285B-BS (silver, shiny)
Z31285C-BS (green)
This light is suitable only for use indoors. The product
is not intended for commercial use.
Q
Description of parts
and features
1
Lamp head with socket
2
Locking knob, lamp head
3a
Upper articulated arm
3b
Lower articulated arm
4
Locking knob, articulated arm
5
Mains lead with mains plug
6
On/Off switch
7
Base screw (approx. 10 mm)
8
Base
9
Screw, upper articulated arm (approx. 18 mm)
10
Bulb
11
Bulb socket ring
12
Lamp shade
Technical data
Desk Lamp
Operating voltage: 230 V~ 50 Hz
Rated power: 1 x max. 42 W
(Eco halogen light
bulb)
Protection class:
Bulb
Bulb: 230 V~, E 27, 42 W
(Eco halogen light
bulb)
Q
Included items
1 Desk lamp with articulated arm
1 Base
1 Lamp shade
1 Bulb, E 27, 42 W, Eco halogen light bulb
2 Screws
1 Nut
1 Instructions for use
Q
Safety
Safety Information
J
WARNING!
DEATH AND ACCIDENTS FOR
TODDLERS AND CHILDREN!
Never leave children unsupervised with the
packaging material. The packaging material
represents a danger of suffocation. Children
frequently underestimate the dangers. Please
keep children away from the device at all times.
J This device is not a toy and should not be
played by children. Children are not able to
understand the dangers that can occur when
handling this device.
J Children or other individuals who do not know
or have no experience of handling this device,
or whose physical, sensory or mental abilities
are restricted, must not use the device without
supervision or instruction by an individual responsible for their safety. Children must be supervised in order to ensure that they do not
play with the device.
DANGER OF
4 GB/IE
Avoid the danger of
death from electric shock!
J Before use, ensure that the mains voltage
available is the same as the required operating
voltage for the device (230 V~).
J Before connecting the device to the mains you
should always check the device and the mains
lead for any damage. A damaged device represents the danger of death from electric shock.
J Do not use the device if you find any damage.
J This product’s external flexible tube is not replace-
able. Hence, if it becomes damaged you must
dispose of the entire product.
J Set the lamp in a stable, clean and even place.
J Please consult a specialist electrician if you dis-
cover any damage or problems with the device,
or for the performance of repairs to the device.
J Never open any of the electrical equipment or
insert any objects into it. Such interventions represent the danger of death from electric shock.
J It is essential that the device does not come
into contact with water or other liquids.
J Never touch the mains plug with damp or wet
hands.
J Protect the mains lead against sharp edges,
mechanical stresses and hot surfaces.
J Never use the device in the immediate vicinity
of a bathtub, shower or swimming pool.
J If the lamp is not to be used for an extended
period (e.g. during your holidays), pull the
mains plug out of the mains socket.
To avoid danger of fire
and injury!
replacing the bulb always remove the mains
plug from the mains socket.
J Allow the lamp to cool for at least 15 minutes
before replacing a defective bulb.
J
DANGER OF FIRE! Always ensure
0.5 m
that there is at least 0.5 m clear distance between the lamp and other
items of furniture or furnishings.
J Do not allow any objects to cover the lamp.
Fire can result from the development of too
much heat.
J Position the lamp so that it is protected from
moisture and dirt.
J Never leave the lamp operating unattended.
J Only use 230 Volt Eco halogen light bulbs
with an E 27 base and a maximum output of
42 watts.
J
This lamp is only intended for use
indoors.
Q
Bringing into use
Q
Assembly
Insert the lower articulated arm
hole in the base
j Fasten the lower articulated arm
with the base screw (approx. 10 mm)
j Place the lamp-shade
1
lamp
screw a bulb
j Tighten the screw (approx. 18 mm)
8
.
12
. Insert the bulb socket ring 11 and
10
into the lamp fitting.
3b
into the
3b
in place
7
.
onto the top of the
9
with a
nut at the hole on the upper articulated arm
(see Fig. A). Check that it sits correctly.
J
DANGER OF INJURY! Check
any bulb for damage immediately
after unpacking. Do not fit a defective
bulb into the lamp.
J
DANGER OF BURNS! Ensure the
lamp has been switched off and allowed to cool before you touch it.
In this way you will avoid the danger of burns.
Light bulbs develop a great deal of heat.
J Replace a defective bulb immediately. Before
WARNING!
TRIC SHOCK! Before you clean the bulb
the mains plug out
RISK TO LIFE FROM ELEC-
10
, pull
5
of the mains socket.
Note: Use a clean, fluff-free cloth when you are
replacing a bulb
10
.
5 GB/IE
Q
Operation
Q
Cleaning and care
Note: The articulated arm 3a, 3b and the lamp
1
head
Note: Adjust the articulated arm
lamp head
can be adjusted as shown in Fig. B.
3a, 3b
and the
1
as shown in Fig. B. The maximum
adjustment angles are signalled by resistances. Do
not move the articulated arm
1
head
beyond these points. Otherwise damage
3a, 3b
and lamp
to the product may occur.
j Always ensure that there is at least 0.5 m clear
distance between the lamp and other items of
furniture or furnishings.
j Insert the mains plug
j
Move the articulated arms
desired direction. Use the locking knobs
5
into the socket.
3a, 3b
in the
2, 4
to fix the position.
Q
Swit ching On / Off
j Press the On / Off switch 6 to turn the desk
lamp on or off.
Q
Maintenance, cleaning and care
Q
Replacing a bulb
RISK TO LIFE FROM ELECTRIC
SHOCK! For electrical safety reasons,
never clean the light with water or other
fluids or immerse it in water.
J Do not use solvents such as petrol and the like
as they could damage the product.
j Use a dry, fluff-free cloth for cleaning.
Q
Disposal
The packaging is made entirely of recy-
clable materials, which you may dispose
of at local recycling facilities.
Under no circumstances should the
device / article and its bulbs be disposed
of with normal household rubbish.
The device / article and its bulbs should be disposed of at an officially approved disposal centre or
at your local communal disposal facility.
Observe the applicable regulations. If you are
uncertain of what to do please contact your local
authority’s refuse disposal department.
CAUTION! DANGER TO LIFE
FROM ELECTRIC SHOCK! Pull the
mains plug
5
out of the socket.
J Allow the bulb
j Rotate the defective bulb
10
to cool down completely.
10
out of the fitting.
j Use a clean, fluff-free cloth when you are
replacing a bulb.
j Now screw the new bulb carefully into the
socket. Check that it is correctly seated.
6 GB/IE
EMC
IAN 75805
Milomex Ltd.
c/o Milomex Services
Hilltop Cottage
Barton Road
Pulloxhill
Bedfordshire
MK45 5HP
UK
Model-No.: Z31285A-BS, Z31285B-BS, Z31285C-BS
Version: 07 / 2012
© by ORFGEN Marketing
Last Information Update: 07 / 2012
Ident.-No.: Z31285A / B / C/-BS072012-6
6
Loading...