KDC-HD262U
CD-RECEIVER
INSTRUCTION MANUAL
AMPLI-TUNER LECTEUR DE CD
MODE D’EMPLOI
REPRODUCTOR DE DISCOS COMPACTOS RECEPTOR DE FM/AM
MANUAL DE INSTRUCCIONES
Take the time to read through this instruction manual. Familiarity with installation and operation procedures will help you obtain the best performance from your new CD-receiver.
For your records
Record the serial number, found on the back of the unit, in the spaces designated on the warranty card, and in the space provided below. Refer to the model and serial numbers whenever you
call upon your Kenwood dealer for information or service on the product.
Model KDC-HD262U Serial number
US Residents Only
Register Online
Register your Kenwood product at www.Kenwoodusa.com
© 2014 JVC KENWOOD Corporation |
B5A-0143-00 (KN) |
CONTENTS
|
BEFORE USE |
2 |
|
|
BASICS |
3 |
|
|
GETTING STARTED |
4 |
|
|
HD Radio™ tuner |
5 |
|
|
CD / USB / iPod / ANDROID |
6 |
|
|
Pandora® |
8 |
|
|
iHeartRadio® |
9 |
|
|
AUX |
10 |
|
|
AUDIO SETTINGS |
10 |
|
|
DISPLAY SETTINGS |
11 |
|
|
MORE INFORMATION |
12 |
|
|
TROUBLESHOOTING |
13 |
|
|
SPECIFICATIONS |
15 |
|
|
INSTALLATION / |
|
|
|
CONNECTION |
16 |
|
|
|
|
|
How to read this manual
•Operations are explained mainly using buttons on the faceplate.
•[XX] indicates the selected items.
•( XX) indicates references are available on the stated page.
BEFORE USE
Warning
Do not operate any function that takes your attention away from safe driving.
Caution
Volume setting:
•Adjust the volume so that you can hear sounds outside the car to prevent accidents.
•Lower the volume before playing digital sources to avoid damaging the speakers by the sudden increase of the output level.
General:
•Avoid using the external device if it might hinder safe driving.
•Make sure all important data has been backed up. We shall bear no responsibility for any loss of recorded data.
•Never put or leave any metallic objects (such as coins or metal tools) inside the unit, to prevent a short circuit.
•If a disc error occurs due to condensation on the laser lens, eject the disc and wait for the moisture to evaporate.
Remote control (RC-406):
•Do not leave the remote control in hot places such as on the dashboard.
•The Lithium battery is in danger of explosion if replaced incorrectly. Replace it only with the same or equivalent type.
•The battery pack or batteries shall not be exposed to excessive heat such as sunshine, fire or the like.
•Keep the battery out of reach of children and in its original packaging when not in used. Dispose of used batteries promptly. If swallowed, contact a physician immediately.
Maintenance
Cleaning the unit: Wipe off dirt on the faceplate with a dry silicone or soft cloth.
Cleaning the connector: Detach the faceplate and clean the connector gently with a cotton swab, being careful not to damage the connector.
Handling discs:
•Do not touch the recording surface of the disc.
•Do not stick tape etc. on the disc, or use a disc with tape stuck on it.
•Do not use any accessories for the disc.
•Clean from the center of the disc and move outward.
•Clean the disc with a dry silicone or soft cloth. Do not use any solvents.
•When removing discs from this unit, pull them out horizontally.
•Remove burrs from the center hole and disc edge before inserting a disc.
Connector (on the reverse side of the faceplate)
2
BASICS
Faceplate |
|
|
Remote control (RC-406) |
Volume knob |
|
|
|
(turn/press) |
Loading slot |
Display window |
Remote sensor (Do not expose |
|
|
|
to bright sunlight.) |
|
|
|
Pull out the |
|
|
|
insulation sheet |
|
|
|
when using for the |
|
|
|
first time. |
|
|
|
* Not used |
Detach button |
|
|
|
Attach |
Detach |
|
How to reset |
How to replace the battery |
|
|
|
Your preset |
|
|
|
|
adjustments will also |
|
|
|
|
be erased. |
|
To |
|
On the faceplate |
On the remote control |
|
Turn on the power |
|
Press |
. |
Press and hold SRC to turn off the power. |
|
|
• Press and hold to turn off the power. |
( Pressing SRC does not turn on the power. ) |
Adjust the volume |
Turn the volume knob. |
Press |
or |
. |
Press ATT during playback to attenuate the sound.
• Press again to cancel.
Select a source |
Press |
|
repeatedly. |
Press SRC repeatedly. |
||
|
• |
Press |
|
to select HD RADIO directly. |
|
|
|
|
|
||||
|
|
|
|
|
|
|
Change the display |
Press |
|
repeatedly. |
( not available ) |
||
information |
• |
Press and hold to scroll the current display information. |
||||
|
||||||
|
|
|
|
|
|
ENGLISH 3
GETTING STARTED
1Cancel the demonstration
When you turn on the power (or after you reset the unit), the display shows: “CANCEL DEMO” “PRESS” “VOLUME KNOB”
1Press the volume knob.
[YES] is selected for the initial setup.
2Press the volume knob again.
“DEMO OFF” appears.
2Set the clock
1 Press the volume knob to enter [FUNCTION].
2 Turn the volume knob to select [CLOCK], then press the knob.
3 Turn the volume knob to select [CLOCK ADJUST], then press the knob.
4Turn the volume knob to make the settings, then press the knob.
Day Hour Minute
5 Turn the volume knob to select [CLOCK FORMAT], then press the knob. 6 Turn the volume knob to select [12H] or [24H], then press the knob. 7 Press and hold to exit.
To return to the previous setting item, press .
3Set the initial settings
1 Press repeatedly to enter STANDBY. 2 Press the volume knob to enter [FUNCTION].
3Turn the volume knob to make a selection (see the following table), then press the knob.
4 Repeat step 3 until the desired item is selected or activated. 5 Press and hold to exit.
To return to the previous setting item, press .
|
|
|
|
Default: XX |
AUDIO CONTROL |
|
|||
|
SP SELECT |
OFF/ 5/4/ 6 × 9/6/ OEM: Selects according to the speaker size |
||
|
|
|
|
(5 inches or 4 inches, 6×9 inches or 6 inches) or OEM speakers for |
|
|
|
|
optimum performance. |
DISPLAY |
|
|||
|
EASY MENU |
ON: Both display and button illumination change to white color when |
||
|
|
|
|
entering [FUNCTION]. ; OFF: Both display and button illumination |
|
|
|
|
remain as [COLOR SELECT] color. ( 11) |
TUNER SETTING |
|
|||
|
PRESET TYPE |
NORMAL: Memorizes one station for each preset button in each band |
||
|
|
|
|
(FM1/ FM2/ FM3/ AM). ; MIX: Memorizes one station for each preset |
|
|
|
|
button, regardless of the selected band. |
SYSTEM |
|
|||
|
KEY BEEP |
ON: Activates the keypress tone. ; OFF: Deactivates. |
||
|
SOURCE SELECT |
|
||
|
|
PANDORA SRC |
ON: Enables PANDORA in source selection. ; OFF: Disables. ( 8) |
|
|
|
IHEART SRC |
ON: Enables IHEARTRADIO in source selection. ; OFF: Disables. ( 9) |
|
|
|
BUILT-IN AUX |
ON: Enables AUX in source selection. ; OFF: Disables. ( 10) |
|
|
CD READ |
1: Automatically distinguishes between audio file disc and music CD. ; |
||
|
|
|
|
2: Forces to play as a music CD. No sound can be heard if an audio file |
|
|
|
|
disc is played. |
|
F/W UPDATE |
|
||
|
|
UPDATE SYSTEM / UPDATE HD |
||
|
|
|
F/W UP xx.xx/ |
YES: Starts upgrading the firmware. ; NO: Cancels (upgrading is not |
|
|
|
F/W UP Vxx |
activated). |
|
|
|
|
For details on how to update the firmware, see: |
|
|
|
|
www.kenwood.com/cs/ce/ |
CLOCK |
|
|||
|
CLOCK DISPLAY |
ON: The clock time is shown on the display even when the unit is turned |
||
|
|
|
|
off. ; OFF: Cancels. |
4
HD Radio™ tuner
You can tune in to both conventional and HD Radio broadcasts.
•To find HD Radio stations in your area, visit <http://www.hdradio.com>.
Search for a station or channel
1 |
Press |
to select HD RADIO. |
|
|
2 |
Press |
repeatedly (or press |
/ |
on RC-406) to |
|
select FM1/ FM2/ FM3/ AM. |
|
|
3Press S/ T(or press S/ on RC-406) to search for a station or channel.
•To change the searching method for S/ T: Press repeatedly.
AUTO1 : Automatically search for a station or channel. AUTO2 : Search for a preset station or channel. MANUAL : Manually search for a station or channel.
•To store a station or channel: Press and hold one of the number buttons (1 to 6).
•To select a stored station or channel: Press one of the number buttons (1 to 6) (or press one of the number buttons (1 to 6) on RC-406).
Direct Access Tuning (using RC-406)
1 Press DIRECT to enter Direct Access Tuning.
2 Press the number buttons to enter a frequency or channel. 3 Press to search for a station or channel.
•To cancel, press or DIRECT.
•If no operation is done for 10 seconds after step 2, Direct Access Tuning is automatically canceled.
Select an HD Radio multicast channel
Many HD Radio stations offer more than one channel programming. This service is called multicasting. While receiving HD Radio multicast channels....
Press S/ Tto select your desired channel (HD1 to HD8).
“LINKING” appears while linking to a multicast channel.
Other settings
1 Press the volume knob to enter [FUNCTION].
2Turn the volume knob to make a selection (see the following table), then press the knob.
3 Repeat step 2 until the desired item is selected or activated. 4 Press and hold to exit.
To return to the previous setting item, press .
|
|
Default: XX |
|
TUNER SETTING |
|
|
|
|
IF BAND |
AUTO: Increases the tuner selectivity to reduce interference noises from |
|
|
|
adjacent FM stations. (Stereo effect may be lost.) ; WIDE: Subjects to |
|
|
|
interference noises from adjacent FM stations, but sound quality will not |
|
|
|
be degraded and the stereo effect will remain. |
|
|
|
|
|
|
AUTO |
YES: Automatically starts memorizing 6 stations with good reception. ; |
|
|
MEMORY |
NO: Cancels. |
|
|
|
• Selectable only if [NORMAL] is selected for [PRESET TYPE]. ( |
4) |
|
|
|
|
|
RECEIVE MODE |
Sets the receive mode of the HD Radio receiver. |
|
|
|
AUTO: Automatically tunes to analog broadcast when there is no digital |
|
|
|
broadcast. ; DIGITAL: Tunes in to digital broadcast only. ; ANALOG: Tunes |
|
|
|
in to analog broadcast only. |
|
|
|
|
|
CLOCK |
|
|
|
|
TIME SYNC |
ON: Synchronizes the unit’s time to the Radio Broadcast Data System |
|
|
|
station time. ; OFF: Cancels. |
|
|
|
ENGLISH |
5 |
CD / USB / iPod / ANDROID
Start playback
The source changes automatically and playback starts.
M Eject disc |
Label side |
USB input terminal
USB
CA-U1EX (max.: 500 mA) (optional accessory)
iPod/iPhone
KCA-iP102 / KCA-iP103 (optional accessory)*1 or accessory cable of the iPod/iPhone*2
ANDROID*3
Micro USB 2.0 cable*2 (commercially available)
*1 KCA-iP102 : 30-pin type, KCA-iP103 : Lightning type *2 Do not leave the cable inside the car when not
using.
To |
On the faceplate |
|
|
On the remote control |
|
||
Playback / pause |
Press |
. |
|
|
Press |
. |
|
Reverse / Fast-forward*4 |
Press and hold S / T. |
|
Press and hold S / |
. |
|||
Select a track/file |
Press S / T. |
|
|
Press S / |
. |
|
|
|
|
|
|
|
|
|
|
Select a folder*5 |
Press J / K. |
|
|
Press |
/ |
. |
|
Repeat play*6 |
Press |
repeatedly. |
|
|
|
|
|
|
TRACK REPEAT/ REPEAT OFF |
|
: Audio CD |
|
|
||
|
FILE REPEAT/ FOLDER REPEAT/ REPEAT OFF : MP3/WMA/WAV file, iPod or |
||||||
|
|
|
|
|
ANDROID |
|
|
|
FILE REPEAT/ REPEAT OFF |
|
: KME Light/ KMC file*7 |
||||
Random play*6 |
Press |
repeatedly. |
|
|
|
|
|
|
DISC RANDOM/ RANDOM OFF |
: Audio CD |
|
|
|||
|
FOLDER RANDOM/ RANDOM OFF : MP3/WMA/WAV file, KME Light/ KMC file, |
||||||
|
|
|
|
iPod or ANDROID |
|
|
|
|
|
|
|
|
|||
|
Press and hold |
to select ALL RANDOM.*8 |
|
|
|||
Select control mode |
While in iPod source, press |
repeatedly. |
|
|
|||
|
MODE ON : Control from the iPod*9 |
|
|
||||
|
MODE OFF : Control from the unit |
|
|
||||
|
While in ANDROID source, ( |
7, [ANDROID SETUP]) |
|
|
|||
|
|
|
|
|
|
|
|
Select music drive |
Press |
repeatedly. |
|
|
|
|
|
( 7, [MUSIC DRIVE]) |
The stored songs in the following start playback. |
|
|
||||
|
• Selected internal or external memory of a smartphone (Mass Storage |
||||||
|
Class). |
|
|
|
|
|
|
|
• Selected drive of a multiple drives device. |
|
|
||||
|
|
|
|
|
|
|
|
6
CD / USB / iPod / ANDROID
*3 |
When connecting an Android device, “Press [VIEW] to install KENWOOD MUSIC PLAY APP” is |
|
|
shown. Follow the instructions to install the application. You can also install the latest version |
|
*4 |
of KENWOOD MUSIC PLAY application on your Android device before connecting. ( 12) |
|
For ANDROID: Applicable only when [BROWSE MODE] is selected. ( [ANDROID SETUP]) |
||
*5 |
For CD: Only for MP3/WMA files. This does not work for iPod/ ANDROID. |
|
*6 |
For iPod/ ANDROID: Applicable only when [MODE OFF]/ [BROWSE MODE] is selected. |
|
*7 |
KME Light : KENWOOD Music Editor Light, KMC : KENWOOD Music Control ( 12) |
|
*8 |
For CD: Only for MP3/WMA files. |
|
*9 |
You can still play/pause, file skip, fast-forward or reverse files from the unit. |
|
Select a file from a folder/list |
||
1 |
Press |
. |
2 |
Turn the volume knob to select a folder/list, then press the knob. |
|
3 |
Turn the volume knob to select a file, then press the knob. |
Quick Search
If you have many files, you can search through them quickly.
For USB (for KME Light/ KMC files):
Press S / T to search at a preset skip search ratio. ([SKIP SEARCH]) Press and hold S / T to search at a 10% ratio.
• Not applicable for CD and MP3/WMA/WAV files.
For iPod:
You can search for a file according to the first character.
Turn the volume knob quickly to enter character search.
Turn the volume knob to select the character.
To search for a character other than A to Z and 0 to 9, enter only “*”. Press S / T to move to the entry position.
• You can enter up to 3 characters.
Press the volume knob to start searching.
•To return to the root folder/ first file/ top menu, press .
•To return to the previous setting item, press .
•To cancel, press and hold .
•For iPod, applicable only when [MODE OFF] is selected. ( 6)
•For ANDROID, applicable only when [BROWSE MODE] is selected. ( [ANDROID SETUP])
Direct Music Search (using RC-406)
1 Press DIRECT.
2 Press the number buttons to enter a track/file number.
3Press to search for music.
•To cancel, press or DIRECT.
•Not available if Random Play is selected.
•Not applicable for iPod, ANDROID, KME Light/ KMC file.
Listen to TuneIn Radio/ TuneIn Radio Pro/ Aupeo
While listening to TuneIn Radio, TuneIn Radio Pro or Aupeo, connect the iPod/iPhone to the USB input terminal of the unit.
• The unit will output the sound from these applications.
Other settings
1 Press the volume knob to enter [FUNCTION].
2Turn the volume knob to make a selection (see the following table), then press the knob.
3 Repeat step 2 until the desired item is selected or activated. 4 Press and hold to exit.
To return to the previous setting item, press .
Default: XX
ANDROID SETUP
BROWSE MODE: Control from the unit (using KENWOOD MUSIC PLAY application). ; HAND MODE: Control other media player applications from the Android device (without using KENWOOD MUSIC PLAY application). However, you can still play/pause and file skip from the unit.
USB
|
MUSIC DRIVE |
DRIVE CHANGE: The next drive ([DRIVE 1] to [DRIVE 5]) is selected |
|
|
automatically and playback starts. |
|
|
Repeat steps 1 to 3 to select the following drives. |
|
SKIP SEARCH |
0.5%/ 1%/ 5%/ 10%: While listening to iPod, ANDROID or KME |
|
|
Light/ KMC file, selects the skip search ratio over the total files. |
ENGLISH 7
Pandora®
Preparation:
Install the latest version of the Pandora application on your device (iPhone/ iPod touch), then create an account and log in to Pandora.
• Select [ON] for [PANDORA SRC]. ( 4)
Start listening
1 Open the Pandora application on your device.
2Connect your device to the USB input terminal.
USB input terminal
KCA-iP102 / KCA-iP103 (optional accessory)*1 or accessory cable of the iPod/iPhone*2
The source changes to PANDORA and broadcast starts.
To |
|
On the faceplate |
|
On the remote control |
|
||
Playback / pause |
Press |
. |
|
Press |
. |
|
|
|
|
|
|
|
|
|
|
Skip a track |
Press T. |
|
|
Press |
. |
|
|
|
|
|
|
|
|
|
|
Thumbs up or thumbs |
Press |
/ |
. |
Press |
/ |
. |
|
down*3 |
|
|
|
|
|
|
|
*1 |
KCA-iP102 : 30-pin type, KCA-iP103 : Lightning type |
|
|
|
|
||
*2 |
Do not leave the cable inside the car when not using. |
|
|
|
|
||
*3 |
If thumbs down is selected, the current track is skipped. |
|
|
|
Create and save a new station
1 Press and hold the volume knob.
2Turn the volume knob to select [FROM TRACK] or [FROM ARTIST], then press the knob.
A new station is created based on the current song or artist.
3 Press and hold one of the number buttons (1 to 5) to store.
To select a stored station, press one of the number buttons (1 to 5).
Search for a registered station
1 Press .
2Turn the volume knob to make a selection, then press the knob.
[BY DATE]: According to the registered date [A-Z]: Alphabetical order
3 Turn the volume knob to the desired station, then press the knob.
To cancel, press and hold . (or using RC-406)
Press J/ K to search for a station, then press .
Bookmark a song or artist information
1 Press and hold J.
2Turn the volume knob to make a selection, then press the knob.
[THIS TRACK]: Current song information [THIS ARTIST]: Current artist information
“BOOKMARKED” appears and the information is stored to your device. The bookmark is available on your Pandora account but not on this unit.
8
iHeartRadio®
Preparation:
Install the latest version of iHeart Link for KENWOOD application on your device (iPhone/ iPod touch), then create an account and log in to iHeartRadio.
• Select [ON] for [IHEART SRC]. ( 4)
Start listening
1 Open the iHeart Link application on your device.
2Connect your device to the USB input terminal.
USB input terminal
KCA-iP102 / KCA-iP103 (optional accessory)*1 or accessory cable of the iPod/iPhone*2
3Press repeatedly to select IHEARTRADIO.
Broadcast starts automatically.
To |
|
On the faceplate |
|
On the remote control |
||
Playback / pause |
Press |
. |
|
Press |
. |
|
|
|
|
|
|
|
|
Skip a track for custom station |
Press T. |
|
|
Press |
. |
|
|
|
|
|
|
|
|
Thumbs up or thumbs down*3 |
Press |
/ |
. |
|
— |
|
for custom station |
|
|
|
|
||
|
|
|
|
|
||
Create a new/custom station |
Press 1. |
|
|
|
— |
|
|
|
|
|
|
|
|
Add to favorite stations for live |
Press 2. |
|
|
|
— |
|
station |
|
|
|
|
||
|
|
|
|
|
||
|
|
|
|
|
|
|
Scan for live station |
Press 5. |
|
|
|
— |
|
|
|
|
|
|
|
|
*1 |
KCA-iP102 : 30-pin type, KCA-iP103 : Lightning type |
|
|
|
|
|
*2 |
Do not leave the cable inside the car when not using. |
|
|
|
|
|
*3 |
If thumbs down is selected, the current track is skipped. |
|
|
|
|
Search for a station
1 Press .
2Turn the volume knob to select a category, then press the knob.
3Turn the volume knob to the desired station, then press the knob.
When a city list appears, you can skip cities in alphabetical order.
To cancel, press and hold . (or using RC-406)
Press J/ K to search for a station, then press .
Skip cities by alphabetical order
While a city list appears during search...
1 Turn the volume knob quickly to enter character search.
2Turn the volume knob or press S / T to select the character to be searched for.
3 Press J/ K to move to the previous/next page.
4 Press the volume knob to start searching.
To cancel, press and hold .
Delete a station
While listening to IHEARTRADIO...
1 Press the volume knob to enter [FUNCTION].
2 Turn the volume knob to select [SYSTEM], then press the knob.
3Turn the volume knob to select [STATION DEL], then press the knob.
4Turn the volume knob to select [LIVE] or [CUSTOM], then press the knob.
5Turn the volume knob to select the desired station to delete, then press the knob.
6 Turn the volume knob to select [YES], then press the knob. 7 Press and hold to exit.
To return to the previous setting item, press .
ENGLISH 9
AUX
Preparation:
Select [ON] for [BUILT-IN AUX]. ( 4)
Start listening
1Connect a portable audio player (commercially available).
Auxiliary input jack
Portable audio player
3.5 mm (1/8") stereo mini plug with “L” shaped connector (commercially available)
2 Press repeatedly to select AUX.
3Turn on the portable audio player and start playback.
Set the AUX name
While listening to a portable audio player connected to the unit...
1 Press the volume knob to enter [FUNCTION].
2Turn the volume knob to select [SYSTEM], then press the knob.
3Turn the volume knob to select [AUX NAME SET], then press the knob.
4Turn the volume knob to make a selection, then press the knob.
AUX (default)/ DVD/ PORTABLE/ GAME/ VIDEO/ TV
5 Press and hold to exit.
To return to the previous setting item, press .
AUDIO SETTINGS
While listening to any source...
1 Press the volume knob to enter [FUNCTION].
2 Turn the volume knob to select [AUDIO CONTROL], then press the knob.
3Turn the volume knob to make a selection (see the following table), then press the knob.
4 Repeat step 3 until the desired item is selected or activated.
5Press and hold to exit.
(or using RC-406)
1 Press AUD to enter [AUDIO CONTROL].
2 Press J/ K to make a selection, then press .
To return to the previous setting item, press .
Default: XX
SUB-W LEVEL |
–15 to +15 (0) |
Adjusts the subwoofer output level. |
||
|
|
|
||
BASS LEVEL |
–8 to +8 (+6) |
Adjusts the level to memorize for each source. (Before making an |
||
|
|
|
||
MID LEVEL |
–8 to +8 (+5) |
|||
adjustment, select the source you want to adjust.) |
||||
|
|
|
||
TRE LEVEL |
–8 to +8 (0) |
|||
|
||||
EQ PRO |
|
|
||
|
|
|
|
|
|
BASS ADJUST |
BASS CTR FRQ |
60HZ/ 80HZ/ 100HZ/ 200HZ: Selects the center frequency. |
|
|
|
|
|
|
|
|
BASS LEVEL |
–8 to +8 (+6): Adjusts the level. |
|
|
|
|
|
|
|
|
BASS Q FACTOR |
1.00/ 1.25/ 1.50/ 2.00: Adjusts the quality factor. |
|
|
|
|
|
|
|
|
BASS EXTEND |
ON: Turns on the extended bass. ; OFF: Cancels. |
|
|
|
|
|
|
|
MID ADJUST |
MID CTR FRQ |
0.5KHZ/ 1.0KHZ/ 1.5KHZ/ 2.5KHZ: Selects the center frequency. |
|
|
|
|
|
|
|
|
MID LEVEL |
–8 to +8 (+5): Adjusts the level. |
|
|
|
MID Q FACTOR |
0.75/ 1.00/ 1.25: Adjusts the quality factor. |
|
|
|
|
|
|
|
TRE ADJUST |
TRE CTR FRQ |
10.0KHZ/ 12.5KHZ/ 15.0KHZ/ 17.5KHZ: Selects the center frequency. |
|
|
|
|
|
|
|
|
TRE LEVEL |
–8 to +8 (0): Adjusts the level. |
|
|
|
|
|
10
AUDIO SETTINGS
PRESET EQ |
DRIVE EQ/ TOP40/ POWERFUL/ ROCK/ POPS/ EASY/ JAZZ/ NATURAL/ |
|
USER: Selects a preset equalizer suitable to the music genre. (Select [USER] |
|
to use the customized settings.) |
|
[DRIVE EQ] is a preset equalizer that reduces noise outside the car or |
|
running noise of the tyres. |
|
|
BASS BOOST |
LEVEL1/ LEVEL2/ LEVEL3: Selects your preferred bass boost level. ; |
|
OFF: Cancels. |
|
|
LOUDNESS |
LEVEL1/ LEVEL2: Selects your preferred low and high frequencies boost to |
|
produce a well-balanced sound at a low volume level. ; OFF: Cancels. |
SUBWOOFER SET |
ON: Turns on the subwoofer output. ; OFF: Cancels. |
|
|
LPF SUBWOOFER |
THROUGH: All signals are sent to the subwoofer. ; 85HZ/ 120HZ/ |
|
160HZ: Audio signals with frequencies lower than 85 Hz/ 120 Hz/ 160 Hz |
|
are sent to the subwoofer. |
SUB-W PHASE |
REVERSE (180°)/ NORMAL (0°): Selects the phase of the subwoofer output |
|
to be in line with the speaker output for optimum performance. (Selectable |
|
only if a setting other than [THROUGH] is selected for [LPF SUBWOOFER].) |
|
|
HPF |
THROUGH: All signals are sent to the speakers. ; 100HZ/ 120HZ/ |
|
150HZ: Audio signals with frequencies higher than 100 Hz/ 120 Hz/ 150 Hz |
|
are sent to the speakers. |
|
|
FADER |
R15 to F15 (0): Adjusts the rear and front speaker output balance. |
|
|
BALANCE |
L15 to R15 (0): Adjusts the left and right speaker output balance. |
|
|
VOLUME OFFSET For AUX: –8 to +8 (0) ; For other sources: –8 to 0: Presets the volume |
|
|
adjustment level of each source. (Before adjustment, select the source you |
|
want to adjust.) |
|
|
SOUND RECNSTR |
ON: Creates realistic sound by compensating the high-frequency components |
(Sound |
and restoring the rise-time of the waveform that are lost in audio data |
reconstruction) |
compression. ; OFF: Cancels. |
[SUB-W LEVEL]/ [LPF SUBWOOFER]/ [SUB-W PHASE] is selectable only if [SUBWOOFER SET] is set to [ON].
DISPLAY SETTINGS
1 Press the volume knob to enter [FUNCTION].
2 Turn the volume knob to select [DISPLAY], then press the knob.
3Turn the volume knob to make a selection (see the following table), then press the knob.
4Repeat step 3 until the desired item is selected/activated or follow the instructions stated on the selected item.
5 Press and hold |
to exit. |
To return to the previous setting item, press .
|
Default: XX |
COLOR SELECT |
VARIABLE SCAN/ CUSTOM R/G/B/ preset colors*: Selects your |
|
preferred key and display illumination color. |
|
|
|
You can create your own color (when [CUSTOM R/G/B] or preset |
|
colors* is selected). The color you have created can be stored in |
|
[CUSTOM R/G/B]. |
|
1 Press and hold the volume knob to enter the detailed color |
|
adjustment. |
|
2 Press S / T to select the color (R/ G/ B) to adjust. |
|
3 Turn the volume knob to adjust the level (0 — 9), then press the |
|
knob. |
|
|
DIMMER |
ON: Dims the display and button illumination. ; OFF: Cancels. |
|
|
BRIGHTNESS |
0 — 31: Selects your preferred brightness level for display and button |
|
illumination. |
|
|
TEXT SCROLL |
AUTO/ ONCE: Selects whether to scroll the display information |
|
automatically, or scroll only once. ; OFF: Cancels. |
|
|
*Preset colors: RED1/ RED2/ RED3/ PURPLE1/ PURPLE2/ PURPLE3/ PURPLE4/ BLUE1/ BLUE2/ BLUE3/ SKYBLUE1/ SKYBLUE2/ LIGHTBLUE/ AQUA1/ AQUA2/ GREEN1/ GREEN2/ GREEN3/ YELLOWGREEN1/ YELLOWGREEN2/ YELLOW/ ORANGE1/ ORANGE2/ ORANGERED
ENGLISH 11
MORE INFORMATION
General
•This unit can only play the following CDs:
•Detailed information and notes about the playable audio files are stated in an online manual on the following web site: www.kenwood.com/cs/ce/audiofile/
Playable files
•Playable audio file: MP3 (.mp3), WMA (.wma)
•Playable disc media: CD-R/CD-RW/CD-ROM
•Playable disc file format: ISO 9660 Level 1/2, Joliet, Long file name.
•Playable USB device file system: FAT12, FAT16, FAT32
Even when audio files comply with the standards listed above, playback may be impossible depending on the types or conditions of media or device.
Unplayable discs
•Discs that are not round.
•Discs with coloring on the recording surface or discs that are dirty.
•Recordable/ReWritable discs that have not been finalized.
•8 cm CD. Attempting to insert using an adapter may cause malfunction.
About USB devices
•This unit can play MP3/WMA/WAV files stored on a USB mass storage class device.
•You cannot connect a USB device via a USB hub.
•Connecting a cable whose total length is longer than 5 m may result in abnormal playback.
•This unit cannot recognize a USB device whose rating is other than 5 V and exceeds 1 A.
About KENWOOD Music Editor Light and KENWOOD Music Control
•This unit supports the PC application KENWOOD Music Editor Light and Android™ application KENWOOD Music Control.
•When you play audio files with song data added using the KENWOOD Music Editor Light or KENWOOD Music Control, you can search for audio files by Genres, Artists, Albums, Playlists, and Songs.
•KENWOOD Music Editor Light and KENWOOD Music Control are available on the following web site: www.kenwood.com/cs/ce/
About iPod/iPhone
Made for
-iPod touch (2nd, 3rd, 4th, and 5th generation)
-iPod classic
-iPod nano (3rd, 4th, 5th, 6th, and 7th generation)
-iPhone 3G, 3GS, 4, 4S, 5, 5S, 5C
•For the latest compatible list and software versions of iPhone/iPod, see: www.kenwood.com/cs/ce/ipod
•You cannot operate iPod if “KENWOOD” or “” is displayed on iPod.
About Android device
•This unit supports Android OS 4.1 and above.
•Some Android devices (with OS 4.1 and above) may not fully support Android Open Accessory (AOA) 2.0.
•If the Android device supports both mass storage class device and AOA 2.0, this unit always playback via AOA 2.0 as priority.
•For more information and the latest compatible list, see: www.kenwood.com/cs/ce/
About Pandora
•Pandora is available only in the U.S., Australia and New Zealand.
•Because Pandora is a third-party service, the specifications are subject to change without prior notice. Accordingly, compatibility may be impaired, or some or all of the services may become unavailable.
•Some functions of Pandora cannot be operated from this unit.
•For issues using the application, please contact Pandora at pandora-support@pandora.com.
About iHeartRadio
•iHeartRadio® is a third-party service, therefore the specifications are subject to change without prior notice. Accordingly, compatibility may be impaired or some or all of the services may become unavailable.
•Some iHeartRadio® functionality cannot be operated from this unit.
About HD Radio™ Technology
•Program Service Data provides song name, artist, station ID, and other relevant data streams.
•Adjacent to traditional main stations are HD2/HD3 Channels, providing new original formats on the FM dial.
• HD Radio broadcasts deliver crystal clear, CD-like digital audio quality to consumers.
12
TROUBLESHOOTING
Symptom |
Remedy |
||||
|
Sound cannot be heard. |
• Adjust the volume to the optimum level. |
|||
|
|
|
• Check the cords and connections. |
||
|
|
|
|||
|
“MISWIRING CHECK WIRING |
Turn the power off, then check to be sure the terminals |
|||
|
THEN PWR ON” appears. |
of the speaker wires are insulated properly. Turn the |
|||
|
|
|
power on again. |
||
General |
|
|
|
||
appears. |
Send the unit to the nearest service center. |
||||
|
“PROTECTING SEND SERVICE” |
||||
|
|
|
|||
|
• Sound cannot be heard. |
Clean the connectors. ( 2) |
|||
|
• The unit does not turn on. |
|
|
||
|
• Information shown on the |
|
|
||
|
|
display is incorrect. |
|
|
|
|
The unit does not work at all. |
Reset the unit. ( 3) |
|||
|
|
|
|
|
|
Radio |
• |
Static noise while listening |
• |
Pull the antenna out all the way. |
|
|
• |
Radio reception is poor. |
• |
Connect the antenna firmly. |
|
HD |
|
to the radio. |
|
|
|
|
|
|
|
||
|
|
|
|||
|
Disc cannot be ejected. |
Press and hold M to forcibly eject the disc. Be careful |
|||
|
|
|
not to drop the disc when it is ejected. If this does not |
||
|
|
|
solve the problem, reset the unit. ( 3) |
||
iPod |
|
|
|||
Noise is generated. |
Skip to another track or change the disc. |
||||
/ |
|
|
|
|
|
USB/ |
Tracks do not play back as |
Playback order is determined when files are recorded. |
|||
|
|||||
CD |
you intended them to play. |
|
|
||
|
|
|
|
||
“READING” keeps flashing. |
Do not use too many hierarchical levels or folders. |
||||
|
|||||
|
|
|
|||
|
Elapsed playing time is not |
This is caused by how the tracks are recorded. |
|||
|
correct. |
|
|
||
|
|
|
|
|
Symptom |
Remedy |
|||
|
Correct characters are not |
This unit can only display uppercase letters, numbers, and |
||
|
displayed (e.g. album |
a limited number of symbols. |
||
|
name). |
|
|
|
|
|
|
||
|
“NA FILE” |
Make sure the disc contains supported audio files. ( 12) |
||
|
“NO DISC” |
Insert a playable disc into the loading slot. |
||
|
|
|
||
|
“TOC ERROR” |
Make sure the disc is clean and inserted properly. |
||
|
|
|
||
|
“PLEASE EJECT” |
Reset the unit. If this does not solve the problem, consult |
||
/iPod |
|
your nearest service center. |
||
|
|
|
||
“READ ERROR” |
Copy the files and folders onto the USB device again. If this |
|||
USB |
||||
|
does not solve the problem, reset the USB device or use |
|||
CD / |
|
another USB device. |
||
|
“NO DEVICE” |
Connect a USB device, and change the source to USB again. |
||
|
|
|
||
|
“COPY PRO” |
A copy-protected file is played. |
||
|
|
|
||
|
“NA DEVICE” |
Connect a supported USB device, and check the |
||
|
|
connections. |
||
|
|
|
||
|
“NO MUSIC” |
Connect a USB device that contains playable audio files. |
||
|
|
|
|
|
|
“iPod ERROR” |
• |
Reconnect the iPod. |
|
|
|
• |
Reset the iPod. |
|
|
|
|
||
|
• Sound cannot be heard |
• Reconnect the Android device. |
||
|
during playback. |
• If in [HAND MODE], launch any media player |
||
ANDROID |
• Sound output only |
• |
application on the Android device and start playback. |
|
from the Android |
Restart the Android device. |
|||
|
• |
If in [HAND MODE], relaunch the current media player |
||
|
device. |
|
application or use another media player application. |
|
|
|
• If this does not solve the problem, the connected |
||
|
|
|
Android device is unable to route the audio signal to |
|
|
|
|
unit. ( 12) |
ENGLISH 13
TROUBLESHOOTING
Symptom |
Remedy |
|||
|
Cannot playback at |
• Make sure KENWOOD MUSIC PLAY APP is installed on |
||
|
[BROWSE MODE]. |
the Android device. ( 7) |
||
|
|
• Reconnect the Android device and make the appropriate |
||
|
|
setting in [ANDROID SETUP]. ( 7) |
||
|
|
• If this does not solve the problem, the connected |
||
|
|
Android device does not support [BROWSE MODE]. |
||
|
|
( |
12) |
|
ANDROID |
“NO DEVICE” or |
• Switch off the developer options on the Android device. |
||
|
“READING” keeps |
• Reconnect the Android device. |
||
|
flashing. |
• If this does not solve the problem, the connected |
||
|
|
Android device does not support [BROWSE MODE]. |
||
|
|
( |
12) |
|
|
|
|
||
|
Playback is intermittent |
Turn off the power saving mode on the Android device. |
||
|
or sound skips. |
|
|
|
|
|
|
||
|
“ANDROID ERROR” / |
• Reconnect the Android device. |
||
|
“NA DEVICE” |
• Restart the Android device. |
||
|
|
|
||
|
“ADD ERROR” / |
New station creation is unsuccessful. |
||
|
“SEARCH ERROR” |
|
|
|
|
|
|
||
|
“CHECK DEVICE” |
Check the Pandora application on your device. |
||
|
|
|
||
|
“NO SKIPS” |
The skip limit has been reached. |
||
|
|
|
||
Pandora |
“NO STATIONS” |
No stations are found. |
||
|
|
|
||
“STATION LIMIT” |
The number of registered stations has reached its limit. |
|||
|
||||
|
|
Retry after deleting unnecessary stations from your device. |
||
|
|
|
||
|
“CONNECT ERROR” |
Communication is unstable. |
||
|
“RATING ERROR” |
Registration of thumbs up/thumbs down has failed. |
||
|
|
|
||
|
“LICENSE ERROR” |
You try to access from a country which Pandora is not |
||
|
|
deliverable. |
Symptom |
Remedy |
||
|
iHeartRadio station |
If “Explicit Content” in [Account Settings] is checked in |
|
|
cannot be selected. |
the web version of iHeartRADIO, custom stations become |
|
|
|
unavailable. |
|
|
|
|
|
|
“CANNOT CREATE” |
Custom station name creation is unsuccessful. |
|
|
|
|
|
|
“CANNOT SAVE” |
Addition to the favorite category failed. |
|
|
|
|
|
|
“DISCONNECTED” |
Check the connection to the device. |
|
|
|
|
|
|
“NO SKIPS” |
The skip limit has been reached. Retry later. |
|
|
|
|
|
iHeartRadio |
“NO STATIONS” |
No stations are found. |
|
|
|
||
“NOT CONNECTED” |
Link to the application is impossible. |
||
|
|||
|
|
|
|
|
“IHEARTLINK UP” |
Make sure you have installed the latest version of the |
|
|
|
iHeart Link for KENWOOD application on your device. |
|
|
|
|
|
|
“PLEASE LOGIN” |
You haven’t log in. Log in again. |
|
|
|
|
|
|
“STATION NOT |
Broadcast from the station is over. |
|
|
AVAILABLE” |
|
|
|
|
|
|
|
“STATION NOT SELECTED” |
No station is selected. |
|
|
|
|
|
|
“STREAM ERROR” |
Broadcast data is interrupted. |
|
|
|
|
|
|
“THUMB FAILED” |
Registration of Thumbs Up/Down has failed. |
|
|
|
|
|
|
“TIMED OUT” |
The request has resulted in time-out. |
|
|
|
|
Muting upon the reception of a phone call
Connect the MUTE wire to your telephone using a commercial telephone accessory. ( 17)
When a call comes in, “CALL” appears. (The audio system pauses.)
• To continue listening to the audio system during a call, press . “CALL” disappears and the audio system resumes.
When the call ends, “CALL” disappears. (The audio system resumes.)
14
SPECIFICATIONS
|
FM |
Frequency Range |
87.9 MHz — 107.9 MHz (200 kHz space) |
|
|
|
|
|
|
|
|
Usable Sensitivity (S/N = 26 dB) |
8.2 dBf (0.71 μV/75 Ω) |
|
|
|
|
|
|
|
|
Quieting Sensitivity |
17.2 dBf (2.0 μV/75 Ω) |
|
|
|
(DIN S/N = 46 dB) |
|
|
|
|
|
|
|
|
|
Frequency Response (±3 dB) |
HD Radio Broadcast |
20 Hz — 20 kHz |
|
|
|
Conventional Broadcast |
30 Hz — 15 kHz |
|
|
|
|
|
Tuner |
|
Signal-to-Noise Ratio |
HD Radio Broadcast |
75 dB (STEREO) |
|
|
Conventional Broadcast |
64 dB (MONO) |
|
|
|
|
||
|
|
|
|
|
|
|
Stereo Separation (1 kHz) |
40 dB |
|
|
|
|
|
|
|
AM |
Frequency Range |
530 kHz — 1 700 kHz (10 kHz space) |
|
|
|
|
|
|
|
|
Channel Space Selection |
10 kHz |
|
|
|
|
|
|
|
|
Usable Sensitivity (S/N = 20 dB) |
29 dBμ (28.2 μV) |
|
|
|
|
|
|
|
|
Frequency Response (±3 dB) |
HD Radio Broadcast |
40 Hz — 15 kHz |
|
|
Signal-to-Noise Ratio |
HD Radio Broadcast |
70 dB (STEREO) |
|
|
|
|
|
|
Laser Diode |
GaAIAs |
|
|
|
|
|
|
|
|
Digital Filter (D/A) |
8 times over sampling |
|
|
|
|
|
|
|
|
Spindle Speed |
500 rpm — 200 rpm (CLV) |
|
|
|
|
|
|
|
|
Wow & Flutter |
Below measurable limit |
|
|
player |
|
|
|
|
Total Harmonic Distortion (1 kHz) |
0.01 % |
|
||
|
Frequency Response (±1 dB) |
20 Hz — 20 kHz |
|
|
CD |
|
|
|
|
Signal-to-Noise Ratio (1 kHz) |
105 dB |
|
||
|
|
|
|
|
|
Dynamic Range |
90 dB |
|
|
|
|
|
|
|
|
Channel Separation |
85 dB |
|
|
|
|
|
||
|
MP3 Decode |
Compliant with MPEG-1/2 Audio Layer-3 |
||
|
WMA Decode |
Compliant with Windows Media Audio |
||
|
|
|
|
|
|
USB Standard |
USB 1.1, USB 2.0 (Full speed) |
||||
|
|
|
|
|
||
|
File System |
FAT12/ 16/ 32 |
||||
|
|
|
|
|
|
|
USB |
Maximum Supply Current |
DC 5 V |
|
|
1 A |
|
|
||||||
MP3 Decode |
Compliant with MPEG-1/2 Audio Layer-3 |
|||||
|
||||||
|
|
|
|
|
||
|
WMA Decode |
Compliant with Windows Media Audio |
||||
|
|
|
|
|
||
|
WAV Decode |
Linear-PCM |
||||
|
|
|
||||
Auxiliary |
Frequency Response (±3 dB) |
20 Hz — 20 kHz |
||||
|
|
|
|
|
||
Input Maximum Voltage |
1 000 mV |
|
||||
|
|
|||||
|
|
|
|
|||
|
Input Impedance |
30 kΩ |
|
|||
|
|
|
|
|||
|
Maximum Output Power |
50 W × 4 |
|
|||
|
|
|
||||
|
Full Bandwidth Power |
22 W × 4 (at less than 1 % THD) |
||||
|
|
|
|
|||
Audio |
Speaker Impedance |
4 Ω — 8 Ω |
|
|||
|
|
|
||||
Tone Action |
Middle |
2.5 kHz ±8 dB |
||||
|
Bass |
200 Hz ±8 dB |
||||
|
|
Treble |
12.5 kHz ±8 dB |
|||
|
|
|
||||
|
Preout Level/Load (CD) |
2 500 mV/10 kΩ |
||||
|
|
|
|
|||
|
Preout Impedance |
≤ 600 Ω |
|
|||
|
|
|
||||
|
Operating Voltage |
14.4 V (10.5 V — 16 V allowable) |
||||
|
|
|
|
|||
General |
Maximum Current Consumption |
10 A |
|
|||
|
|
|||||
Installation Size (W × H × D) |
182 mm × 53 mm × 159 mm |
|||||
|
Operational Temperature Range |
0°C — +40°C |
||||
|
|
(7-3/16" × 2-1/16" × 6-1/4") |
||||
|
|
|
||||
|
Weight |
1.3 kg (2.87 lbs) |
||||
|
|
|
|
|
|
Subject to change without notice.
ENGLISH 15