KD-R311
FRANÇAIS
ENGLISH
GET0624-003A
[E/EU]
EN, FR
1009DTSMDTJEIN© 2009 Victor Company of Japan, Limited
For canceling the display demonstration, see page 4. / Pour annuler la démonstration des
affichages, référez-vous à la page 4.
CD RECEIVER / RÉCEPTEUR CD
KD-R412 / KD-R411 /
KD-R35 / KD-R312 / KD-R311
INSTRUCTIONS
MANUEL D’INSTRUCTIONS
For installation and connections, refer to the separate manual. / Pour l’installation et les
raccordements, se référer au manuel séparé.
Dear Customer,
This apparatus is in conformance with the valid
European directives and standards regarding
electromagnetic compatibility and electrical safety.
European representative of Victor Company of
Japan, Limited is:
JVC Technical Services Europe GmbH
Postfach 10 05 04
61145 Friedberg
Germany
Cher(e) client(e),
Cet appareil est conforme aux directives et
normes européennes en vigueur concernant la
compatibilité électromagnétique et à la sécurité
électrique.
Représentant européen de la société Victor
Company of Japan, Limited:
JVC Technical Services Europe GmbH
Postfach 10 05 04
61145 Friedberg
Allemagne
Having TROUBLE with operation?
Please reset your unit
Refer to page of How to reset your unit
Vous avez des PROBLÈMES de fonctionnement?
Réinitialisez votre appareil
Référez-vous à la page intitulée Comment réinitialiser votre appareil
CoverRear_KD-R412_003A_f.indd 1-2CoverRear_KD-R412_003A_f.indd 1-2 10/13/09 11:51:18 AM10/13/09 11:51:18 AM
2 ENGLISH
Thank you for purchasing a JVC product.
Please read all instructions carefully before operation, to ensure your complete understanding and
to obtain the best possible performance from the unit.
IMPORTANT FOR LASER PRODUCTS
1. CLASS 1 LASER PRODUCT
2. CAUTION: Do not open the top cover. There are no user serviceable parts inside the unit; leave
all servicing to qualified service personnel.
3. CAUTION: Visible and/or invisible class 1M laser radiation when open. Do not view directly with
optical instruments.
4. REPRODUCTION OF LABEL: CAUTION LABEL, PLACED OUTSIDE THE UNIT.
Warning:
If you need to operate the unit while driving,
be sure to look around carefully or you may be
involved in a traffic accident.
For safety...
• Do not raise the volume level too much, as
this will block outside sounds, making driving
dangerous.
• Stop the car before performing any
complicated operations.
Temperature inside the car...
If you have parked the car for a long time in
hot or cold weather, wait until the temperature
in the car becomes normal before operating
the unit.
KD-R412/KD-R411 is equipped with the
steering wheel remote control function.
Before operating, connect a JVC's OE remote
adapter (not supplied) which matches your car
to the steering wheel remote input terminal on
the rear of the unit.
• For details, refer also to the instructions
supplied with the remote adapter.
Information for Users on Disposal of
Old Equipment and Batteries
[European Union only]
These symbols indicate that the product and
the battery with this symbol should not be
disposed as general household waste at its
end-of-life.
If you wish to dispose of this product and
the battery, please do so in accordance with
applicable national legislation or other rules
in your country and municipality.
By disposing of this product correctly, you
will help to conserve natural resources and
will help prevent potential negative effects
on the environment and human health.
Notice:
The sign Pb below the symbol for batteries
indicates that this battery contains lead.
Products
Battery
EN02-09_KD-R412_003A_f.indd 2EN02-09_KD-R412_003A_f.indd 2 10/15/09 2:32:58 PM10/15/09 2:32:58 PM
3ENGLISH
How to read this manual
The following icons/symbols are used to
indicate:
Press and hold the button(s)
until the desired operation
begins.
Turn the control dial.
Turn the control dial
to make a selection,
then press to confirm.
(
XX)
Reference page number
<XXXX> Menu setting item
Continued on the next page
How to attach/detach the control
panel
How to reset your unit
Your preset adjustments
will also be erased.
How to forcibly eject a disc
• You can forcibly eject the loaded disc even
if the disc is locked. To lock/unlock the disc,
8.
• Be careful not to drop the disc when it ejects.
• If this does not work, reset your unit.
CONTENTS
3 How to read this manual
3 How to attach/detach the control
panel
3 How to reset your unit
3 How to forcibly eject a disc
4 Canceling the display
demonstration
4 Setting the clock
5 Basic operations
6 Listening to the radio
8 Listening to a disc
10 Listening to the USB device
(For KD-R412/KD-R411/KD-R35)
11 Listening to the other external
components
12 Using the remote controller
(For KD-R412/KD-R411)
13 Selecting a preset sound mode
13 Menu operations
17 More about this unit
20 Maintenance
21 Troubleshooting
24 Specifications
[Hold]
[Hold]
EN02-09_KD-R412_003A_4.indd 3EN02-09_KD-R412_003A_4.indd 3 10/12/09 9:59:13 AM10/12/09 9:59:13 AM
4 ENGLISH
1 Turn on the power.
2
3
Setting the clock
4 Select <DEMO OFF>.
5
6 Finish the procedure.
Canceling the display demonstration
6 Adjust the minute.
7 Select <24H/12H>.
8 Select <24 HOUR> or
<12 HOUR>.
9 Finish the procedure.
1 Turn on the power.
2
3 Select <CLOCK>.
4 Select <CLOCK SET>.
5 Adjust the hour.
(Initial setting)
[Hold]
(Initial setting)
[Hold]
EN02-09_KD-R412_003A_4.indd 4EN02-09_KD-R412_003A_4.indd 4 10/12/09 9:59:13 AM10/12/09 9:59:13 AM
5ENGLISH
Basic operations
Control dialEjects the disc Loading slot
Remote sensor (for KD-R412/KD-R411)
You can control this unit with an
optionally purchased remote control,
RM-RK50 (
12).
Display window
Auxiliary input jack
Detaches the panel
When you press or hold the following button(s)...
Button General operation
• Turns on.
• Selects the available sources (if the power is turned on). If the source is ready,
playback also starts.
• Turns off if pressed and held.
• Adjusts the volume level.
• Selects items.
• Mutes the sound while listening to a source. If the source is “CD“ or “USB,“
playback pauses. Press the control dial again to cancel muting or resume
playback.
• Confirms selection.
• Selects the sound mode.
• Enters tone level adjustment directly ( 13) if pressed and held.
Enters playback mode menu directly ( 9).
• Returns to the previous menu
• Activates/deactivates TA Standby Reception
• Enters PTY Searching mode if pressed and held
Power off : Checks the current clock time
Power on : Changes the display information
USB (Universal Serial
Bus) input jack
For KD-R412/
KD-R411/KD-R35
EN02-09_KD-R412_003A_5.indd 5EN02-09_KD-R412_003A_5.indd 5 10/13/09 12:49:11 PM10/13/09 12:49:11 PM
6 ENGLISH
Manual search
[Hold]
“M” flashes, then press
the button repeatedly.
When an FM stereo broadcast is
hard to receive
1
2
]
<TUNER>
]
<MONO>
]
<MONO ON>
Reception improves, but stereo effect
will be lost.
To restore the stereo effect, repeat the same
procedure to select <MONO OFF>.
Changing the display information
Frequency
=
Clock
=
(back to
the beginning)
Automatic presetting (FM)—
SSM (Strong-station Sequential Memory)
You can preset up to 18 stations for FM.
While listening to a station...
1
2
]
<TUNER>
]
<SSM>
]
<SSM 01 – 06> / <SSM 07 – 12> /
<SSM 13 – 18>
“SSM” flashes and local stations with
the strongest signals are searched and
stored automatically.
To preset another 6 stations, repeat the
above procedure by selecting one of the other
6 SSM setting ranges.
Listening to the radio
~
]
“FM” or “AM”
Ÿ
“ST” lights up when receiving an FM stereo broadcast with sufficient signal strength.
[Hold]
[Hold]
EN02-09_KD-R412_003A_5.indd 6EN02-09_KD-R412_003A_5.indd 6 10/13/09 12:49:39 PM10/13/09 12:49:39 PM
7ENGLISH
Manual presetting (FM/AM)
You can preset up to 18 stations for FM and 6
stations for AM.
Ex.: Storing FM station of 92.50 MHz into preset
number “04.”
1
]
“92.50MHz”
2
“PRESET MODE” flashes.
3
]
Selects preset number “04.”
“P04” flashes and “MEMORY” appears.
Selecting a preset station
or
1
2
The following features are available
only for FM Radio Data System stations.
Searching for your favourite
FM Radio Data System
programme—
PTY Search
You can tune in to a station broadcasting your
favourite programme by searching for a PTY
code.
1
The last selected PTY code appears.
2
]
Select one of your favourite
programme types or a PTY code ( 17),
and start searching.
If there is a station broadcasting a
programme of the same PTY code as you
have selected, that station is tuned in.
Standby receptions
TA Standby Reception
TA Standby Reception allows the unit to switch
temporarily to Traffic Announcement (TA) from
any source other than AM.
• The volume changes to the preset TA volume
level if the current level is lower than the
preset level ( 15).
To activate TA Standby Reception
If the TP indicator lights up, TA
Standby Reception is activated.
If the TP indicator flashes, TA
Standby Reception is not yet
activated.
• To activate the reception, tune in to another
station providing Radio Data System signals
required for TA Standby Reception.
• To deactivate the reception, press
T/P BACK
again.
[Hold]
[Hold]
EN02-09_KD-R412_003A_5.indd 7EN02-09_KD-R412_003A_5.indd 7 10/12/09 10:31:57 AM10/12/09 10:31:57 AM
8 ENGLISH
Stopping playback and ejecting
the disc
“NO DISC” appears.
Press /
SOURCE
to listen to
another playback source.
Listening to a disc
~
]
Turn on the power.
Ÿ
All tracks will be played repeatedly until you
change the source or eject the disc.
Prohibiting disc ejection
To cancel the prohibition, repeat the same
procedure.
PTY Standby Reception
PTY Standby Reception allows the unit to
switch temporarily to your favourite PTY
programme from any source other than AM.
To activate and select your favourite PTY
code for PTY Standby Reception, see “Menu
operations: <PTY-STANDBY>.” (
14)
If the PTY indicator lights up, PTY Standby
Reception is activated.
If the PTY indicator flashes, PTY Standby
Reception is not yet activated.
• To activate the reception, tune in to another
station providing these signals.
• To deactivate the reception, select <PTY OFF>
for the PTY code ( 14). The PTY indicator
goes off.
Tracing the same programme—
Network-Tracking Reception
When driving in an area where FM reception is
not sufficient enough, this unit automatically
tunes in to another FM Radio Data System
station of the same network, possibly
broadcasting the same programme with
stronger signals.
Programme A broadcasting on different
frequency areas (01 – 05)
To change the Network-Tracking Reception
setting, see “Menu operations: <AF-REG>.”
( 14)
Automatic station selection—
Programme Search
Usually when you select a preset number, the
station preset in that number is tuned in.
If the signals from the FM Radio Data System
preset station are not sufficient for good
reception, this unit, using the AF data, tunes in
to another frequency possibly broadcasting the
same programme as the original preset station
is broadcasting.
• See “Menu operations: <P-SEARCH>.” (
15)
Changing the display information
Station name (PS)
=
Station
Frequency
=
Programme
type (PTY)
=
Clock
=
(back to
the beginning)
[Hold]
EN02-09_KD-R412_003A_4.indd 8EN02-09_KD-R412_003A_4.indd 8 10/12/09 9:59:15 AM10/12/09 9:59:15 AM
Loading...