OBJ_DOKU-33326-003.fm Page 1 Thursday, November 9, 2017 4:42 PM
|
|
|
Robert Bosch Power Tools GmbH |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
70538 Stuttgart |
GSB Professional |
|
|
||
|
|
|
GERMANY |
|
|
|||
|
|
|
www.bosch-pt.com |
|
|
|||
|
|
|
|
|
|
|
|
|
|
|
|
1 609 92A 411 (2017.11) O / 40 |
13 | 13 RE | 16 | 16 RE |
|
|||
|
|
|
|
|
||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
en Original instructions cn tw
ko
th
id Petunjuk-Petunjuk untuk Penggunaan Orisinal vi Bản gốc hướng dẫn sử dụng
OBJ_BUCH-1850-003.book Page 2 Thursday, November 9, 2017 4:43 PM
2 |
English . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 6
. . . . . . . . . . . . . . . . . . . . . . 12
. . . . . . . . . . . . . . . . . . . . . . 16
. . . . . . . . . . . . . . . . . . . . . . . . |
21 |
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Bahasa Indonesia . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Halaman 29
Tiếng Việt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Trang 35
|
1 609 92A 411 | (9.11.17) |
|
|
Bosch Power Tools |
|||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
OBJ_BUCH-1850-003.book Page 3 Thursday, November 9, 2017 4:43 PM
| 3
GSB 16 RE:
2 608 180 009 (DP 500)
GSB 16 RE:
2 608 030 053 (MS 65)
2 608 030 055 (MS 80)
2 609 199 582
2 603 001 009
6 035 961 081
1 607 950 045
GSB 13/GSB 13 RE/ GSB 16/GSB 16 (RE):
2 608 571 079
GSB 13/GSB 13 RE/ GSB 16/GSB 16 (RE):
2 608 572 165
GSB 13/GSB 13 RE/ GSB 16/GSB 16 (RE):
2 608 572 184
2 607 990 050 (S 41)
|
Bosch Power Tools |
|
|
1 609 92A 411 | (9.11.17) |
|||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
OBJ_BUCH-1850-003.book Page 4 Thursday, November 9, 2017 4:43 PM
4 |
1 |
4 |
|
3 |
2 |
8 |
|
5 |
|
7 |
|
6 |
|
11 |
|
9 |
|
10 |
GSB 16 RE |
9 |
|
|
A |
B |
|
3 |
|
2 |
x |
|
11 |
9 |
|
|
1 609 92A 411 | (9.11.17) |
Bosch Power Tools |
OBJ_BUCH-1850-003.book Page 5 Thursday, November 9, 2017 4:43 PM
|
|
|
|
|
| 5 |
C |
|
12 |
D |
|
|
|
|
|
|
|
|
|
|
|
|
14 |
|
|
|
|
15 |
|
|
|
|
13 |
|
|
|
E |
|
|
F |
|
|
|
|
4mm |
4mm |
|
|
16 |
1 |
17 |
17 |
1 |
16 |
G |
|
|
H |
|
|
8 |
|
|
|
|
8 |
Bosch Power Tools |
|
|
|
|
1 609 92A 411 | (9.11.17) |
OBJ_BUCH-1850-003.book Page 6 Thursday, November 9, 2017 4:43 PM
6 | English
English
Safety Notes
General Power Tool Safety Warnings
WARNING Read all safety warnings and all instructions. Failure to follow the warnings and
instructions may result in electric shock, fire and/or serious injury.
Save all warnings and instructions for future reference.
The term “power tool” in the warnings refers to your mainsoperated (corded) power tool or battery-operated (cordless) power tool.
Work area safety
Keep work area clean and well lit. Cluttered or dark areas invite accidents.
Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes.
Keep children and bystanders away while operating a power tool. Distractions can cause you to lose control.
Electrical safety
Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any adapter plugs with earthed (grounded) power tools. Unmodified plugs and matching outlets will reduce risk of electric shock.
Avoid body contact with earthed or grounded surfaces, such as pipes, radiators, ranges and refrigerators.
There is an increased risk of electric shock if your body is earthed or grounded.
Do not expose power tools to rain or wet conditions.
Water entering a power tool will increase the risk of electric shock.
Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool. Keep cord away from heat, oil, sharp edges and moving parts. Damaged or entangled cords increase the risk of electric shock.
When operating a power tool outdoors, use an extension cord suitable for outdoor use. Use of a cord suitable for outdoor use reduces the risk of electric shock.
If operating a power tool in a damp location is unavoidable, use a residual current device (RCD) protected supply. Use of an RCD reduces the risk of electric shock.
Personal safety
Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol or medication. A moment of inattention while operating power tools may result in serious personal injury.
Use personal protective equipment. Always wear eye protection. Protective equipment such as dust mask, non-skid safety shoes, hard hat, or hearing protection used for appropriate conditions will reduce personal injuries.
Prevent unintentional starting. Ensure the switch is in the off-position before connecting to power source and/or battery pack, picking up or carrying the tool.
Carrying power tools with your finger on the switch or energising power tools that have the switch on invites accidents.
Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left attached to a rotating part of the power tool may result in personal injury.
Do not overreach. Keep proper footing and balance at all times. This enables better control of the power tool in unexpected situations.
Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing and gloves away from moving parts. Loose clothes, jewellery or long hair can be caught in moving parts.
If devices are provided for the connection of dust extraction and collection facilities, ensure these are connected and properly used. Use of dust collection can reduce dust-related hazards.
Power tool use and care
Do not force the power tool. Use the correct power tool for your application. The correct power tool will do the job better and safer at the rate for which it was designed.
Do not use the power tool if the switch does not turn it on and off. Any power tool that cannot be controlled with the switch is dangerous and must be repaired.
Disconnect the plug from the power source and/or the battery pack from the power tool before making any adjustments, changing accessories, or storing power tools. Such preventive safety measures reduce the risk of starting the power tool accidentally.
Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool. Power tools are dangerous in the hands of untrained users.
Maintain power tools. Check for misalignment or binding of moving parts, breakage of parts and any other condition that may affect the power tool’s operation. If damaged, have the power tool repaired before use.
Many accidents are caused by poorly maintained power tools.
Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control.
Use the power tool, accessories and tool bits etc. in accordance with these instructions, taking into account the working conditions and the work to be performed.
Use of the power tool for operations different from those intended could result in a hazardous situation.
Service
Have your power tool serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the power tool is maintained.
|
1 609 92A 411 | (9.11.17) |
|
|
Bosch Power Tools |
|||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
OBJ_BUCH-1850-003.book Page 7 Thursday, November 9, 2017 4:43 PM
English | 7
Safety Warnings for Drills
Wear ear protectors when impact drilling. Exposure to noise can cause hearing loss.
Product Description and
Specifications
Use auxiliary handle(s), if supplied with the tool. Loss of control can cause personal injury.
Hold power tool by insulated gripping surfaces, when performing an operation where the cutting accessory may contact hidden wiring or its own cord. Cutting accessory contacting a “live” wire may make exposed metal parts of the power tool “live” and could give the operator an electric shock.
Use suitable detectors to determine if utility lines are hidden in the work area or call the local utility company for assistance. Contact with electric lines can lead to fire and electric shock. Damaging a gas line can lead to explosion. Penetrating a water line causes property damage or may cause an electric shock.
Switch off the power tool immediately when the tool insert jams. Be prepared for high reaction torque that can cause kickback. The tool insert jams when:
–the power tool is subject to overload or
–it becomes wedged in the workpiece.
When working with the machine, always hold it firmly with both hands and provide for a secure stance. The power tool is guided more secure with both hands.
Secure the workpiece. A workpiece clamped with clamping devices or in a vice is held more secure than by hand.
Always wait until the machine has come to a complete stop before placing it down. The tool insert can jam and lead to loss of control over the power tool.
Products sold in GB only: Your product is fitted with a
BS 1363/A approved electric plug with internal fuse (ASTA approved to BS 1362).
If the plug is not suitable for your socket outlets, it should be cut off and an appropriate plug fitted in its place by an authorised customer service agent. The replacement plug should have the same fuse rating as the original plug.
The severed plug must be disposed of to avoid a possible shock hazard and should never be inserted into a mains socket elsewhere.
Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury.
Intended Use
The machine is intended for impact drilling in brick, concrete and stone as well as for drilling in wood, metal and plastic. Machines with electronic control and right/left rotation are also suitable for screwdriving and thread-cutting.
Product Features
The numbering of the product features refers to the illustration of the machine on the graphics page.
1 Keyless chuck *
2 Front sleeve
3 Rear sleeve
4 “Drilling/Impact Drilling” selector switch
5 Lock-on button for On/Off switch
6 On/Off switch
7 Thumbwheel for speed preselection (GSB 16 RE)
8 Rotational direction switch (GSB 13 RE / GSB 16 RE) 9 Auxiliary handle (insulated gripping surface) *
10Handle (insulated gripping surface)
11Depth stop *
12Chuck key *
13Key type drill chuck *
14Universal bit holder *
15Screwdriver bit *
16Hex key **
17Open-end spanner **
*Accessories shown or described are not part of the standard delivery scope of the product. A complete overview of accessories can be found in our accessories program.
**Commercially available (not included in the delivery scope)
Technical Data
|
|
Impact Drill |
GSB ... |
13 |
13 RE |
16 |
|
16 RE |
|
|
|||||
|
|
Article number |
3 601 ... |
|
|
B27 0.. |
B27 1.. |
B28 0.. |
|
B28 1.. |
|
|
|||
|
|
Rated power input |
W |
650 |
650 |
750 |
|
750 |
|
|
|||||
|
|
Output power |
W |
353 |
353 |
456 |
|
456 |
|
|
|||||
|
|
No-load speed |
min-1 |
3 150 |
3 150 |
3 250 |
|
3 250 |
|
|
|||||
|
|
Impact rate |
min-1 |
47 000 |
47 000 |
48 500 |
|
48 500 |
|
|
|||||
|
|
Rated torque |
Nm |
1.8 |
1.8 |
2.1 |
|
2.1 |
|
|
|||||
|
|
Speed preselection |
|
|
|
– |
– |
– |
|
|
|
|
|
||
|
|
Right/left rotation |
|
|
|
– |
|
– |
|
|
|
|
|
||
|
|
Spindle collar dia. |
mm |
43 |
43 |
43 |
|
43 |
|
|
|||||
|
|
The values given are valid for a nominal voltage [U] of 230 V. For different voltages and models for specific countries, these values can vary. |
|
|
|
|
|||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Bosch Power Tools |
|
|
|
|
|
|
1 609 92A 411 | (9.11.17) |
|
|
||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
OBJ_BUCH-1850-003.book Page 8 Thursday, November 9, 2017 4:43 PM
8 | English
Impact Drill |
GSB ... |
13 |
13 RE |
16 |
16 RE |
Max. drilling dia. |
mm |
13 |
13 |
16 |
16 |
– Concrete |
|||||
– Steel |
mm |
10 |
10 |
12 |
12 |
– Wood |
mm |
20 |
20 |
25 |
25 |
Chuck clamping range |
mm |
1.5 – 13 |
1.5 – 13 |
1.5 – 13 |
1.5 – 13 |
Weight according to EPTA- |
|
|
|
|
|
Procedure 01:2014 |
kg |
1.6 |
1.6 |
1.8 |
1.8 |
Protection class |
|
/ II |
/ II |
/ II |
/ II |
The values given are valid for a nominal voltage [U] of 230 V. For different voltages and models for specific countries, these values can vary.
Assembly
Before any work on the machine itself, pull the mains plug.
Auxiliary Handle (see figure A)
Operate your machine only with the auxiliary handle 9.
The auxiliary handle 9 can be set to any position for a secure and low-fatigue working posture.
Turn the bottom part of the auxiliary handle 9 in anticlockwise direction and insert the depth stop 11.
Pull out the depth stop until the distance between the tip of the drill bit and the tip of the depth stop corresponds with the desired drilling depth X.
Afterwards, tighten the bottom part of the auxiliary handle 9 again by turning in clockwise direction.
The knurled surface of the depth stop 11 must face upward.
Changing the Tool
Keyless Chuck (see figure B)
Hold the rear sleeve 3 of the keyless chuck 1 tight and turn the front sleeve 2 in rotation direction , until the tool can be inserted. Insert the tool.
Hold the rear sleeve 3 of the keyless chuck 1 tight and firmly turn the front sleeve 2 in rotation direction by hand until the locking action is no longer heard. This automatically locks the drill chuck.
The locking is released again to remove the tool when the front sleeve 2 is turned in the opposite direction.
Key Type Drill Chuck (see figure C)
Wear protective gloves when changing the tool. The drill chuck can become very hot during longer work periods.
Open the key type drill chuck 13 by turning until the tool can be inserted. Insert the tool.
Insert the chuck key 12 into the corresponding holes of the key type drill chuck 13 and clamp the tool uniformly.
Screwdriver Tools (see figure D)
When working with screwdriver bits 15, a universal bit holder 14 should always be used. Use only screwdriver bits that fit the screw head.
For driving screws, always position the “Drilling/Impact Drilling” selector switch 4 to the “Drilling” symbol.
Replacing the Drill Chuck
Removing the Drill Chuck (see figure E)
To dismount the keyless chuck 1, clamp a Hex key 16 into the keyless chuck 1 and position an open-end spanner 17
(size 14) against the spanner flats of the drive spindle. Place the machine on a firm support, e.g., a workbench. Hold the open-end spanner 17 firmly and loosen the keyless chuck 1 by turning the Hex key 16 in rotation direction . Loosen a tight seated keyless chuck by giving the long end of the Hex key 16 a blow. Remove the Hex key from the keyless chuck and completely unscrew the keyless chuck.
The key type drill chuck 13 is removed in the same manner as the keyless chuck.
Mounting the Drill Chuck (see figure F)
The keyless chuck/key type drill chuck is mounted in reverse order.
The drill chuck must be tightened with a tightening torque of approx. 33– 39 Nm.
Dust/Chip Extraction
Dust from materials such as lead-containing coatings, some wood types, minerals and metal can be harmful to one’s health. Touching or breathing-in the dust can cause allergic reactions and/or lead to respiratory infections of the user or bystanders.
Certain dust, such as oak or beech dust, is considered carcinogenic, especially in connection with wood-treatment additives (chromate, wood preservative). Materials containing asbestos may only be worked by specialists.
–Provide for good ventilation of the working place.
–It is recommended to wear a P2 filter-class respirator.
Observe the relevant regulations in your country for the materials to be worked.
Prevent dust accumulation at the workplace. Dust can easily ignite.
Operation
Starting Operation
Observe correct mains voltage! The voltage of the power source must agree with the voltage specified on the nameplate of the machine. Power tools marked with 230 V can also be operated with 220 V.
|
1 609 92A 411 | (9.11.17) |
|
|
Bosch Power Tools |
|||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
OBJ_BUCH-1850-003.book Page 9 Thursday, November 9, 2017 4:43 PM
Products sold in AUS and NZ only: Use a residual current device (RCD) with a rated residual current of 30 mA or less.
Reversing the rotational direction (see figures G– H) (GSB 13 RE/GSB 16 RE)
Actuate the rotational direction switch 8 only when the machine is at a standstill.
The rotational direction switch 8 is used to reverse the rotational direction of the machine. However, this is not possible with the On/Off switch 6 actuated.
Right Rotation: For drilling and driving in screws, push the rotational direction switch 8 upward on the left side and at the same time downward on the right side.
Left Rotation: For loosening and unscrewing screws and nuts, push the rotational direction switch 8 downward on the left side and at the same time upward on the right side.
Setting the operating mode
Drilling and Screwdriving
Set the selector switch 4 to the “Drilling” symbol.
Impact Drilling
Set the selector switch 4 to the “Impact drilling” symbol.
The selector switch 4 engages noticeably and can also be actuated with the machine running.
Switching On and Off
To start the machine, press the On/Off switch 6 and keep it pressed.
To lock the pressed On/Off switch 6, press the lock-on button
5.
To switch off the machine, release the On/Off switch 6 or when it is locked with the lock-on button 5, briefly press the On/Off switch 6 and then release it.
Adjusting the Speed/Impact Rate (GSB 13 RE/GSB 16 RE)
The speed/impact rate of the switched on power tool can be variably adjusted, depending on how far the On/Off switch 6 is pressed.
Light pressure on the On/Off switch 6 results in low speed/impact rate. Further pressure on the switch increases the speed/impact rate.
Preselecting the Speed/Impact Rate (GSB 16 RE)
With the thumbwheel for speed preselection 7, the required speed/impact rate can be preselected even during operation.
The required speed/impact rate depends on the material and the working conditions, and can be determined through practical testing.
Working Advice
Apply the power tool to the screw/nut only when it is switched off. Rotating tool inserts can slip off.
After longer periods of working at low speed, allow the machine to cool down by running it for approx. 3 minutes at maximum speed with no load.
English | 9
For drilling in tiles, set the selector switch 4 to the “Drilling” symbol. Do not switch over to the symbol “Impact Drilling” or work with impact until after drilling through the tile.
Use carbide tipped drill bits when working in concrete, masonry and brick wall.
For drilling in metal, use only perfectly sharpened HSS drill bits (HSS =high-speed steel). The appropriate quality is guaranteed by the Bosch accessories program.
Twist drills from 2.5 – 10 mm can easily be sharpened with the drill bit sharpener (see accessories).
GSB 16 RE
We recommend the use of a drill stand (see accessories) for work where greater precision is particularly required.
The machine vice, which is available as an accessory, enables secure clamping of workpieces. This prevents the workpiece from turning and any accidents this would cause.
Maintenance and Service
Maintenance and Cleaning
Before any work on the machine itself, pull the mains plug.
For safe and proper working, always keep the machine and ventilation slots clean.
If the replacement of the supply cord is necessary, this has to be done by Bosch or an authorized Bosch service agent in order to avoid a safety hazard.
After-sales Service and Application Service
Our after-sales service responds to your questions concerning maintenance and repair of your product as well as spare parts. Exploded views and information on spare parts can also be found under:
www.bosch-pt.com
Bosch’s application service team will gladly answer questions concerning our products and their accessories.
In all correspondence and spare parts orders, please always include the 10-digit article number given on the nameplate of the product.
Cambodia
Robert Bosch (Cambodia) Co., Ltd
Unit 8BC, GT Tower, 08th Floor, Street 169,
Czechoslovakia Blvd, Sangkat Veal Vong
Khan 7 Makara, Phnom Penh
VAT TIN: 100 169 511
Tel.: +855 23 900 685
Tel.: +855 23 900 660
www.bosch.com.kh
|
Bosch Power Tools |
|
|
1 609 92A 411 | (9.11.17) |
|||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
OBJ_BUCH-1850-003.book Page 10 Thursday, November 9, 2017 4:43 PM
10 | English
People’s Republic of China China Mainland
Bosch Power Tools (China) Co., Ltd. 567, Bin Kang Road
Bin Jiang District 310052 Hangzhou, P. R. China Tel.: 4008268484
Fax: (0571) 87774502
E-Mail: contact.ptcn@cn.bosch.com www.bosch-pt.com.cn
HK and Macau Special Administrative Regions
Robert Bosch Co. Ltd.
21st Floor, 625 King’s Road North Point, Hong Kong
Customer Service Hotline: +852 2101 0235 Fax: +852 2590 9762
E-Mail: info@hk.bosch.com www.bosch-pt.com.hk
India
Bosch Service Center
69, Habibullah Road, (Next to PSBB School), T. Nagar Chennai – 600077
Phone: (044) 64561816
Bosch Service Center Rishyamook
85A, Panchkuin Road
New Delhi – 110001
Phone: (011) 43166190
Bosch Service Center
79, Crystal Bldg., Dr. Annie Besant Road, Worli Mumbai – 400018
Phone: (022) 39569936 / (022 )39569959 / (022) 39569967 / (022) 24952071
Indonesia
PT Robert Bosch
Palma Tower 10th Floor
Jalan RA Kartini II-S Kaveling 6
Pondok Pinang, Kebayoran Lama
Jakarta Selatan 12310
Tel.: (21) 3005-5800
www.bosch-pt.co.id
Malaysia
Robert Bosch Sdn. Bhd.(220975-V) PT/SMY No. 8A, Jalan 13/6
46200 Petaling Jaya Selangor
Tel.: (03) 79663194 Toll-Free: 1800 880188 Fax: (03) 79583838
E-Mail: kiathoe.chong@my.bosch.com www.bosch-pt.com.my
Pakistan
Robert Bosch Middle East FZE – Pakistan Liaison Office 2nd Floor Plaza # 10, CCA Block, DHA Phase 5
Lahore, 54810
Phone: +92(303)4444311 Email: Faisal.Khan@bosch.com
Philippines
Robert Bosch, Inc.
28th Floor Fort Legend Towers, 3rd Avenue corner 31st Street, Fort Bonifacio, Global City, 1634 Taguig City
Tel.: (632) 8703871
Fax: (632) 8703870 www.bosch-pt.com.ph
Singapore
Powerwell Service Centre Ptd Ltd
Bosch Authorised Service Centre (Power Tools) 4012 Ang Mo Kio Ave 10, #01-02 TECHplace Singapore 569628
Tel.: 6452 1770
Fax: 6452 1760
E-Mail: ask@powerwellsc.com www.powerwellsc.com www.bosch-pt.com.sg
Thailand
Robert Bosch Ltd.
Liberty Square Building
No. 287, 11 Floor
Silom Road, Bangrak
Bangkok 10500
Tel.: 02 6393111
Fax: 02 2384783
Robert Bosch Ltd., P. O. Box 2054
Bangkok 10501
www.bosch.co.th
Bosch Service – Training Centre
La Salle Tower Ground Floor Unit No.2
10/11 La Salle Moo 16
Srinakharin Road
Bangkaew, Bang Plee
Samutprakarn 10540
Tel.: 02 7587555
Fax: 02 7587525
Vietnam
Branch of Bosch Vietnam Co., Ltd in HCMC Floor 10, 194 Golden Building
473 Dien Bien Phu Street
Ward 25, Binh Thanh District, Ho Chi Minh City Tel.: (08) 6258 3690
Fax: (08) 6258 3692 Hotline: (08) 6250 8555 www.bosch-pt.com.vn
Armenia, Azerbaijan, Georgia, Kyrgyzstan, Mongolia, Tajikistan, Turkmenistan, Uzbekistan
TOO “Robert Bosch” Power Tools, After Sales Service Rayimbek Ave., 169/1
050050, Almaty, Kazakhstan
Service Email: service.pt.ka@bosch.com
Official Website: www.bosch.com, www.bosch-pt.com
|
1 609 92A 411 | (9.11.17) |
|
|
Bosch Power Tools |
|||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
OBJ_BUCH-1850-003.book Page 11 Thursday, November 9, 2017 4:43 PM
English | 11
Bahrain |
Oman |
Hatem Al Juffali Technical Equipment Establishment. |
Malatan Trading & Contracting LLC |
Kingdom of Bahrain, Setra Highway, Al Aker Area |
P.O. Box 131 |
Phone: +966126971777-311 |
Ruwi, 112 Sultanate of Oman |
Fax: +97317704257 |
Phone: +968 99886794 |
Email: h.berjas@eajb.com.sa |
Email: malatanpowertools@malatan.net |
Egypt |
Qatar |
|
Unimar |
International Construction Solutions W L L |
|
20 Markaz kadmat |
P. O. Box 51, Doha |
|
El tagmoa EL Aoul – New Cairo |
Phone: +974 40065458 |
|
Phone: + 20 2224 76091-95 |
Fax: +974 4453 8585 |
|
Phone: + 20 2224 78072-73 |
Email: csd@icsdoha.com |
|
Fax: + 20 2224 78075 |
Saudi Arabia |
|
Email: adelzaki@unimaregypt.com |
||
Juffali Technical Equipment Co. (JTECO) |
||
Iran |
||
Kilo 14, Madinah Road, Al Bawadi District |
||
Robert Bosch Iran |
Jeddah 21431 |
|
3rd Floor, No 3, Maadiran Building |
Phone: +966 2 6672222 Ext. 1528 |
|
Aftab St., Khodami St., Vanak Sq. |
Fax: +966 2 6676308 |
|
Tehran 1994834571 |
Email: roland@eajb.com.sa |
|
Phone: +982186092057 |
Syria |
|
|
Iraq
Sahba Technology Group Al Muthana airport road Baghdad
Phone: +9647901906953 Phone Dubai: +97143973851
Email: bosch@sahbatechnology.com
Jordan
Roots Arabia – Jordan
Nasser Bin Jameel street, Building 37 Al Rabiah 11194 Amman
Phone: +962 6 5545778 Email: bosch@rootsjordan.com
Dallal Establishment for Power Tools
P.O. Box 1030
Aleppo
Phone: +963212116083
Email: rita.dallal@hotmail.com
United Arab Emirates
Central Motors & Equipment LLC, P.O. Box 1984 Al-Wahda Street – Old Sana Building
Sharjah
Phone: +971 6 593 2777 Fax: +971 6 533 2269
Email: powertools@centralmotors.ae
Yemen
Kuwait
Al Qurain Automotive Trading Company
Shuwaikh Industrial Area, Block 1, Plot 16, Street 3rd P.O. Box 164 – Safat 13002
Phone: 24810844 Fax: 24810879
E-mail: josephkr@aaalmutawa.com
Lebanon
Tehini Hana & Co. S.A.R.L.
P.O. Box 90-449
Jdeideh
Dora-Beirut
Phone: +9611255211
Email: service-pt@tehini-hana.com
Libya
El Naser for Workshop Tools
Swanee Road, Alfalah Area
Tripoli
Phone: +218 21 4811184
Abualrejal Trading Corporation
Sana’a Zubiery St. Front to new Parliament Building Phone: +967-1-202010
Fax: +967-1-279029
Email: tech-tools@abualrejal.com
Ethiopia
Forever plc
Kebele 2,754, BP 4806,
Addis Ababa
Phone: +251 111 560 600
Email: foreverplc@ethionet.et
Ghana
C.WOERMANN LTD.
Nsawam Road/Avenor Junction, P.O. Box 1779
Accra
Phone: +233 302 225 141
Kenya
Robert Bosch East Africa Ltd
Mpaka Road P.O. Box 856
00606 Nairobi
|
Bosch Power Tools |
|
|
1 609 92A 411 | (9.11.17) |
|||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
OBJ_BUCH-1850-003.book Page 12 Thursday, November 9, 2017 4:43 PM
12 |
Nigeria
Robert Bosch Nigeria Ltd.
52 – 54 Isaac John Street P.O. Box
GRA Ikeja – Lagos
Republic of South Africa
Customer service
Hotline: (011) 6519600
Gauteng – BSC Service Centre
35 Roper Street, New Centre Johannesburg
Tel.: (011) 4939375
Fax: (011) 4930126 E-Mail: bsctools@icon.co.za
KZN – BSC Service Centre
Unit E, Almar Centre
143 Crompton Street Pinetown
Tel.: (031) 7012120
Fax: (031) 7012446
E-Mail: bsc.dur@za.bosch.com
Western Cape – BSC Service Centre
Democracy Way, Prosperity Park Milnerton
Tel.: (021) 5512577
Fax: (021) 5513223 E-Mail: bsc@zsd.co.za
Bosch Headquarters
Midrand, Gauteng Tel.: (011) 6519600 Fax: (011) 6519880
E-Mail: rbsa-hq.pts@za.bosch.com
Tanzania
Diesel & Autoelectric Service Ltd.
117 Nyerere Rd., P.O. Box 70839
Vingunguti 12109, Dar Es Salaam
Phone: +255 222 861 793/794
Australia, New Zealand and Pacific Islands
Robert Bosch Australia Pty. Ltd.
Power Tools
Locked Bag 66
Clayton South VIC 3169
Customer Contact Center
Inside Australia:
Phone: (01300) 307044
Fax: (01300) 307045
Inside New Zealand:
Phone: (0800) 543353
Fax: (0800) 428570
Outside AU and NZ:
Phone: +61 3 95415555
www.bosch-pt.com.au
www.bosch-pt.co.nz
Disposal
The machine, accessories and packaging should be sorted for environmental-friendly recycling.
Do not dispose of power tools into household waste!
Subject to change without notice.
!
" "
发事故。
尘或气体。
中会使操作者失去对工具的控制。
险。
如果你身体接地会增加电击危险。
电动工具将增加电击危险。
部件。
接软线。
使用剩余电流动作保护器RCD RCD
|
1 609 92A 411 | (9.11.17) |
|
|
Bosch Power Tools |
|||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|