Loading...
Version 1.0
Published October 2017
Copyright©2017 ASRock INC. All rights reserved.
Copyright Notice:
No part of this documentation may be reproduced, transcribed, transmitted, or translated in any language, in any form or by any means, except duplication of documentation by the purchaser for backup purpose, without written consent of ASRock Inc.
Products and corporate names appearing in this documentation may or may not be registered trademarks or copyrights of their respective companies, and are used only for identification or explanation and to the owners’ benefit, without intent to
infringe.
Disclaimer:
Specifications and information contained in this documentation are furnished for informational use only and subject to change without notice, and should not be constructed as a commitment by ASRock. ASRock assumes no responsibility for any errors or omissions that may appear in this documentation.
With respect to the contents of this documentation, ASRock does not provide warranty of any kind, either expressed or implied, including but not limited to the implied warranties or conditions of merchantability or fitness for a particular purpose.
In no event shall ASRock, its directors, officers, employees, or agents be liable for any indirect, special, incidental, or consequential damages (including damages for loss of profits, loss of business, loss of data, interruption of business and the like), even if ASRock has been advised of the possibility of such damages arising from any defect or error in the documentation or product.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1)this device may not cause harmful interference, and
(2)this device must accept any interference received, including interference that may cause undesired operation.
CALIFORNIA, USA ONLY
The Lithium battery adopted on this motherboard contains Perchlorate, a toxic substance controlled in Perchlorate Best Management Practices (BMP) regulations passed by the California Legislature. When you discard the Lithium battery in California, USA, please follow the related regulations in advance.
“Perchlorate Material-special handling may apply, see www.dtsc.ca.gov/hazardouswaste/ perchlorate”
ASRock Website: http://www.asrock.com
AUSTRALIA ONLY
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage caused by our goods. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure. If you require assistance please call ASRock Tel : +886-2-28965588 ext.123 (Standard International call charges apply)
The terms HDMI™ and HDMI High-Definition Multimedia Interface, and the HDMI logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries.
Contents
Chapter 1 Introduction |
1 |
|
1.1 |
Package Contents |
1 |
1.2 |
Specifications |
2 |
1.3 |
Motherboard Layout |
5 |
1.4 |
I/O Panel |
7 |
Chapter 2 Installation |
9 |
|
2.1 |
Installing Memory Modules (SO-DIMM) |
10 |
2.2 |
Expansion Slot (PCI Express Slot) |
12 |
2.3 |
Jumpers Setup |
13 |
2.4 |
Onboard Headers and Connectors |
14 |
Chapter 3 Software and Utilities Operation |
18 |
|
3.1 |
Installing Drivers |
18 |
3.2 |
ASRock Live Update & APP Shop |
19 |
3.2.1 |
UI Overview |
19 |
3.2.2 |
Apps |
20 |
3.2.3 |
BIOS & Drivers |
23 |
3.2.4 |
Setting |
24 |
Chapter 4 UEFI SETUP UTILITY |
25 |
|
4.1 |
Introduction |
25 |
4.1.1 |
UEFI Menu Bar |
25 |
4.1.2 |
Navigation Keys |
26 |
4.2 |
Main Screen |
27 |
4.3 |
Advanced Screen |
28 |
4.3.1 |
CPU Configuration |
29 |
4.3.2 |
Chipset Configuration |
30 |
4.3.3 |
Storage Configuration |
32 |
4.3.4 |
Super IO Configuration |
33 |
4.3.5 |
ACPI Configuration |
35 |
4.3.6 |
USB Configuration |
37 |
4.4 |
Tools |
38 |
4.5 |
Hardware Health Event Monitoring Screen |
40 |
4.6 |
Security Screen |
41 |
4.7 |
Boot Screen |
42 |
4.8 |
Exit Screen |
44 |
J4105B-ITX
J4005B-ITX
Chapter 1 Introduction
Thank you for purchasing ASRock J4105B-ITX / J4005B-ITX motherboard, a reliable motherboard produced under ASRock’s consistently stringent quality control. It delivers excellent performance with robust design conforming to ASRock’s commitment to quality and endurance.
In this manual, Chapter 1 and 2 contains the introduction of the motherboard and step-by-step installation guides. Chapter 3 contains the operation guide of the
software and utilities. Chapter 4 contains the configuration guide of the BIOS setup.
Because the motherboard specifications and the BIOS software might be updated, the content of this documentation will be subject to change without notice. In case any modifications of this documentation occur, the updated version will be available on ASRock’s website without further notice. If you require technical support related to this motherboard, please visit our website for specific information about the model you are using. You may find the latest VGA cards and CPU support list on ASRock’s website as well. ASRock website http://www.asrock.com.
1.1 Package Contents
•ASRock J4105B-ITX / J4005B-ITX Motherboard (Mini-ITX Form Factor)
•ASRock J4105B-ITX / J4005B-ITX Quick Installation Guide
•ASRock J4105B-ITX / J4005B-ITX Support CD
•2 x Serial ATA (SATA) Data Cables (Optional)
•1 x I/O Panel Shield
English
1
English
1.2 Specifications
Platform |
• |
Mini-ITX Form Factor |
|
• |
Solid Capacitor design |
CPU |
• |
Intel® Quad-Core Processor J4105 (up to 2.5 GHz) |
|
|
(for J4105B-ITX) |
|
• Intel® Dual-Core Processor J4005 (up to 2.7 GHz) |
|
|
|
(for J4005B-ITX) |
Memory |
• |
Dual Channel DDR4 Memory Technology |
|
• 2 x DDR4 SO-DIMM Slots |
|
|
* 2GB DRAM per module is not supported. |
|
|
• Supports DDR4 2400/2133 non-ECC, un-buffered memory |
|
|
• Max. capacity of system memory: 8GB |
|
Expansion |
• |
1 x PCI Express 2.0 x16 Slot (PCIE1: x2 mode) |
Slot |
|
|
Graphics |
• |
Integrated Intel® UHD Graphics 600: 12 EUs inside (Up to |
|
|
750MHz) (for J4105B-ITX) |
• Integrated Intel® UHD Graphics 600: 12 EUs inside (Up to 700MHz) (for J4005B-ITX)
• DX12, OpenGL 4.3, OGL ES 3.0, OpenCL 2.0
• HW Acceleration Decode: HEVC (H.265) 8 bit, HEVC (H.265)10 bit, H.264 @ Lvl5.2 (AVC), JPEG/MJPEG, VP8, VP9 8bit, VP9 10 bit
• HW Acceleration Encode: HEVC (H.265) 8 bit, HEVC (H.265)10 bit, H.264 @ Lvl5.2 (AVC), JPEG/MJPEG, VP8, VP9 8bit
• Dual graphics output: support D-Sub and HDMI ports by independent display controllers
• Supports HDMI with max. resolution up to 4K x 2K (4096x2160) @ 30Hz
• Supports D-Sub with max. resolution up to 2048x1536 @ 60Hz
• Supports Auto Lip Sync, xvYCC and HBR (High Bit Rate Audio) with HDMI Port (Compliant HDMI monitor is required)
2
J4105B-ITX
J4005B-ITX
• Supports HDCP with HDMI Port
• Supports Full HD 1080p Blu-ray (BD) playback with HDMI
|
|
Port |
Audio |
• |
7.1 CH HD Audio (Realtek ALC887 Audio Codec) |
|
* To configure 7.1 CH HD Audio, it is required to use an HD |
|
|
front panel audio module and enable the multi-channel audio |
|
|
feature through the audio driver. |
|
|
• |
Supports Surge Protection |
|
• |
ELNA Audio Caps |
LAN |
• |
PCIE x1 Gigabit LAN 10/100/1000 Mb/s |
|
• |
Realtek RTL8111H |
|
• Supports Wake-On-LAN |
|
|
• |
Supports Lightning/ESD Protection |
|
• Supports Energy Efficient Ethernet 802.3az |
|
|
• |
Supports PXE |
Rear Panel |
• |
1 x PS/2 Mouse/Keyboard Port |
I/O |
• |
1 x Parallel Port (ECP/EPP Support) |
|
• 1 x Serial Port: COM1 |
|
|
• 1 x D-Sub Port |
|
|
• 1 x HDMI Port |
|
|
• 1 x USB 2.0 Port (Supports ESD Protection) |
|
|
• 3 x USB 3.1 Gen1 Ports (Supports ESD Protection) |
|
|
• 1 x RJ-45 LAN Port with LED (ACT/LINK LED and SPEED |
|
|
|
LED) |
|
• HD Audio Jacks: Line in / Front Speaker / Microphone |
|
Storage |
• |
2 x SATA3 6.0 Gb/s Connectors, support NCQ, AHCI and |
|
|
Hot Plug |
Connector • 1 x COM Port Header
•1 x Chassis Intrusion and Speaker Header
•1 x CPU Fan Connector (3-pin)
•1 x Chassis Fan Connector (3-pin)
•1 x 24 pin ATX Power Connector
•1 x Front Panel Audio Connector
English
3
•2 x USB 2.0 Headers (Support 4 USB 2.0 ports) (Supports ESD Protection)
•1 x USB 3.1 Gen1 Header (Supports 2 USB 3.1 Gen1 ports) (Supports ESD Protection)
*USB3_1_2 is shared with USB2_3.
BIOS |
• |
AMI UEFI Legal BIOS with GUI support |
Feature |
• |
Supports Plug and Play |
|
• ACPI 5.0 compliant wake up events |
|
|
• |
Supports jumperfree |
|
• |
SMBIOS 3.0 support |
Hardware |
• |
CPU/Chassis temperature sensing |
Monitor |
• |
CPU/Chassis Fan Tachometer |
|
• CPU/Chassis Quiet Fan (Auto adjust chassis fan speed by |
|
|
|
CPU temperature) |
|
• CPU/Chassis Fan multi-speed control |
|
|
• |
CASE OPEN detection |
|
• Voltage monitoring: +12V, +5V, +3.3V, CPU Vcore |
|
OS |
• |
Microsoft® Windows® 10 64-bit |
Certifica- |
• |
FCC, CE |
tions |
• |
ErP/EuP ready (ErP/EuP ready power supply is required) |
* For detailed product information, please visit our website: http://www.asrock.com
English
4
J4105B-ITX
J4005B-ITX
1.3 Motherboard Layout
1
B:USB T:USB USB 2 1 3.1 Gen1 |
M Keyboard PS2 ouse / |
COM1 |
PARALLE |
VGA1 |
LP ORT |
HDMI1
USB4 |
USB 3.1 Gen1: |
|
USB 2.0 :U SB3 |
|
RJ-4 5 |
|
|
|
|
|
|
MIC IN |
Bottom: |
|
FRON Center: T |
|
LINE Top: IN |
|
|
||||
|
|
|
|
|
|
CPU_FAN1
BIOS |
RoHS |
|
|
|
|
|
|
||
|
|
|
|
|
|
||||
ROM |
|
|
|
ATXPWR1 |
|
||||
CMOS |
|
A1DDR4 |
|
|
|
||||
|
|
|
|
|
|
||||
Battery |
|
|
|
|
|
|
|
|
|
LAN |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
PANEL1 |
|
|
|
|
|
|
|
|
|
|
||
|
|
|
|
|
|
PLEDPWRBTN |
|
HDLED RESET |
|
Front USB 3.0 |
|
|
|
|
|
|
|||
|
|
|
|
|
|
||||
|
|
|
|
|
|
||||
|
|
|
|
|
|
||||
|
|
|
|
|
|
||||
|
|
|
|
|
|
||||
|
|
|
|
|
|
||||
|
|
|
|
|
|
||||
|
|
|
|
|
|
|
|
|
|
1
SPK_CI1
DDR4_B1
1
CLRMOS1
1 |
HD_AUDIO1 |
|
USB3_1_2 |
COM2 |
|
SATA3_2 |
SATA3_1 |
|||
|
|
1 |
|
1 |
Super |
|
I/O |
||
|
|
|
|
|
USB2_3 |
USB4_5 |
|
AUDIO |
1 |
1 |
|
CODEC |
|
|
|
PCIE1
2
3
4
5
6
14 |
13 |
12 |
11 |
10 |
9 |
8 |
7 |
English
5
No. Description
1CPU Fan Connector (CPU_FAN1)
2ATX Power Connector (ATXPWR1)
3System Panel Header (PANEL1)
4Chassis Intrusion and Speaker Header (SPK_CI1)
5Clear CMOS Jumper (CLRMOS1)
6Chassis Fan Connector (CHA_FAN1)
72 x 260-pin DDR4 SO-DIMM Slots (DDR4_A1, DDR4_B1)
8COM Port Header (COM2)
9USB 2.0 Header (USB4_5)
10USB 3.1 Gen1 Header (USB3_1_2)
11USB 2.0 Header (USB2_3)
12SATA3 Connector (SATA3_1)
13SATA3 Connector (SATA3_2)
14Front Panel Audio Header (HD_AUDIO1)
English
6
J4105B-ITX
J4005B-ITX
1.4 I/O Panel
|
|
|
4 |
1 |
2 |
3 |
5 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
12 |
|
|
11 |
|
10 |
9 |
7 |
|
|
|
|
6 |
||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
8 |
|
|
|
|
|
|||
No. |
|
Description |
|
No. |
Description |
|
|
|
|
|
|
|
|
|
|
|
|||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|||||||||
1 |
|
|
|
PS/2 Mouse/Keyboard Port |
7 |
USB 2.0 Port (USB3_3) |
|
||||||||||||||
2 |
|
|
|
Parallel Port |
|
8 |
USB 3.1 Gen1 Port (USB3_4) |
|
|||||||||||||
3 |
|
|
|
LAN RJ-45 Port* |
|
9 |
HDMI Port |
|
|
|
|
|
|
|
|
|
|
|
|||
4 |
|
|
|
Line In (Light Blue)** |
|
10 |
D-Sub Port |
|
|
|
|
|
|
|
|
|
|
|
|||
5 |
|
|
|
Front Speaker (Lime)** |
11 |
COM Port |
|
|
|
|
|
|
|
|
|
|
|
||||
6 |
|
|
|
Microphone (Pink)** |
|
12 |
USB 3.1 Gen1 Ports (USB3_1_2) |
|
|||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
*There are two LEDs on the LAN port. Please refer to the table below for the LAN port LED indications.
ACT/LINK LED SPEED LED
LAN Port |
|
|
|
|
|
|
Activity / Link LED |
|
Speed LED |
|
|
||
|
|
|
||||
Status |
|
Description |
|
Status |
|
Description |
Off |
|
No Link |
|
Off |
|
10Mbps connection |
|
|
|
||||
Blinking |
|
Data Activity |
|
Orange |
|
100Mbps connection |
On |
|
Link |
|
Green |
|
1Gbps connection |
|
|
|
|
|
|
|
English
7
** To configure 7.1 CH HD Audio, it is required to use an HD front panel audio module and enable the multichannel audio feature through the audio driver.
Please set Speaker Configuration to “7.1 Speaker”in the Realtek HD Audio Manager.
Function of the Audio Ports in 7.1-channel Configuration:
Port |
|
Function |
Light Blue (Rear panel) |
|
Rear Speaker Out |
|
||
Lime (Rear panel) |
|
Front Speaker Out |
Pink (Rear panel) |
|
Central /Subwoofer Speaker Out |
Lime (Front panel) |
|
Side Speaker Out |
English
8
J4105B-ITX
J4005B-ITX
Chapter 2 Installation
This is a Mini-ITX form factor motherboard. Before you install the motherboard, study the configuration of your chassis to ensure that the motherboard fits into it.
Pre-installation Precautions
Take note of the following precautions before you install motherboard components or change any motherboard settings.
•Make sure to unplug the power cord before installing or removing the motherboard. Failure to do so may cause physical injuries to you and damages to motherboard components.
•In order to avoid damage from static electricity to the motherboard’s components, NEVER place your motherboard directly on a carpet. Also remember to use a grounded wrist strap or touch a safety grounded object before you handle the components.
•Hold components by the edges and do not touch the ICs.
•Whenever you uninstall any components, place them on a grounded anti-static pad or in the bag that comes with the components.
•When placing screws to secure the motherboard to the chassis, please do not overtighten the screws! Doing so may damage the motherboard.
English
9
2.1 Installing Memory Modules (SO-DIMM)
This motherboard provides two 260-pin DDR4 (Double Data Rate 4) SO-DIMM slots, and supports Dual Channel Memory Technology.
1. It is not allowed to install a DDR, DDR2 or DDR3 memory module into a DDR4 slot; otherwise, this motherboard and SO-DIMM may be damaged.
2.The SO-DIMM only fits in one correct orientation. It will cause permanent damage to the motherboard and the SO-DIMM if you force the SO-DIMM into the slot at incorrect orientation.
Supported DDR4 Non ECC SODIMM
Raw Card
A(1Rx8)
B(2Rx8)
C(1Rx16)
Dual Channel Memory Configuration
DDR4_A1 |
Populated |
|
|
DDR4_B1 |
Populated |
English
10
J4105B-ITX
J4005B-ITX
1
2
3
English
11
Loading...