Beko WMI 71641 User Manual

Size:
5.66 Mb
Download

Automatic

Fully Integrated

Washing Machine

WMI 71641

Please read this manual first!

Dear Customer,

We hope that your product which has been manufactured in modern facilities and passed through a strict quality control procedure will give you the best results. Therefore, we advise you to read through this manual carefully before using your product and keep it for future reference.

This operation manual will…

…help you use your machine in a fast and safe way.

Please read the Operation Manual before installing and starting your machine.

Particularly follow the instructions related to safety.

Keep this Operating Manual within easy reach. You may need it in the future.

Please read all additional documents supplied with this machine.

Please note that this Operating Manual may be applicable for several other models.

Differences between models will be identified in the manual.

Explanation of symbols

Throughout this Operation Manual the following symbols are used:

C Important information or useful hints about usage.

AWarning for hazardous situations with regard to life and property.

BWarning for supply voltage.

2820521336_EN/290310.1351

This appliance’s packaging material is recyclable. Help recycle it and protect the environment by dropping it off in the municipal receptacles provided for this purpose.

Your appliance also contains a great amount of recyclable material. It is marked with this label to indicate the used appliances that should not be mixed with other waste. This way, the appliance recycling organised by your manufacturer will be done under the best possible conditions, in compliance with European Directive 2002/96/EC on Waste Electrical and Electronic Equipment. Contact your town hall or your retailer for the used appliance collection points closest to your home. We thank you doing your part to protect the environment.

TABLE OF CONTENTS

1 Your Washing Machine

4

Overview . . . . . . . . . . . . . . . . . . . . . . . . 4

Specifications . . . . . . . . . . . . . . . . . . . . . 5

2 Warnings

6

General Safety . . . . . . . . . . . . . . . . . . . . 6 First Use . . . . . . . . . . . . . . . . . . . . . . . . . 6 Intended use . . . . . . . . . . . . . . . . . . . . . 6 Safety instructions . . . . . . . . . . . . . . . . . 6 If there are children in your house... . . . . 7 Electrical connection. . . . . . . . . . . . . . . . 7

3 Installation

9

Removing packaging reinforcement . . . . 9

Opening the transportation locks . . . . . . 9 Appropriate installation location . . . . . . . 9 Raising the appliance . . . . . . . . . . . . . . . 9 Adjusting the feet . . . . . . . . . . . . . . . . . 10 Connecting to the water supply. . . . . . . 10 Connecting to the drain . . . . . . . . . . . . 10 Electrical connection . . . . . . . . . . . . . . 11 Destroying the packaging material . . . . 11 Disposing of the old machine . . . . . . . . 11

4 Initial preparations for

 

washing

12

Sorting the laundry . . . . . . . . . . . . . . . . 12

Preparing clothes for washing. . . . . . . . 12 Correct load capacity . . . . . . . . . . . . . . 12 Loading door . . . . . . . . . . . . . . . . . . . . 13 Detergents and softeners . . . . . . . . . . . 13

5 Selecting a Program and

 

Operating Your Machine

16

Control panel . . . . . . . . . . . . . . . . . . . . 16 Display symbols . . . . . . . . . . . . . . . . . . 17 Turning the machine on . . . . . . . . . . . . 17 Program selection. . . . . . . . . . . . . . . . . 17 Additional programs . . . . . . . . . . . . . . 17 Special programs . . . . . . . . . . . . . . . . . 18 Temperature selection. . . . . . . . . . . . . . 18

Spin Speed selection . . . . . . . . . . . . . . 19

Program and consumption table. . . . . . 20 Auxiliary functions. . . . . . . . . . . . . . . . . 21 Time display . . . . . . . . . . . . . . . . . . . . . 21

Starting the Program . . . . . . . . . . . . . . 22 Progress of program. . . . . . . . . . . . . . . 22

Changing the selections after the program has started . . . . . . . . . . . . . . . . . . . . . . 23

Switching the machine to standby mode23 Child-prooflock . . . . . . . . . . . . . . . . . . 23 Ending the program through cancelling. 23

Program in rinse hold mode . . . . . . . . . 24 End of program . . . . . . . . . . . . . . . . . . 24

6 Quick instructions for daily

 

use

25

 

 

7 Maintenance and cleaning

26

Detergent Drawer . . . . . . . . . . . . . . . . . 26 The loading door and the drum . . . . . . 26 Body and control panel. . . . . . . . . . . . . 26 Inlet water filters . . . . . . . . . . . . . . . . . . 26

Draining any remaining water and cleaning the pump filter . . . . . . . . . . . . . . . . . . . 27

8

Solution suggestions for

 

problems

29

 

 

 

9

Guarantee

35

 

 

 

10

Service

36

 

 

 

11

BUILT-ININSTALLATION

37

 

 

 

3EN

1

Your Washing Machine

Overview

1

3

4

2

5

6

1

- Detergent Drawer

4

- Control Panel

2

- Door

5

- Filter Cap

3

- Top Lid

6

- Height-adjustablefeet

4EN

Specifications

Models

WMI71641

 

 

Maximum dry laundry capacity (kg)

7

 

 

Height (cm)

84

 

 

Width (cm)

60

 

 

Depth (cm)

54

 

 

Net Weight (±4 kg)

73

 

 

Electricity (V/Hz.)

230 V / 50Hz

 

 

Total Current (A)

10

 

 

Total Power (W)

2200

 

 

Spinning cycle (rpm max.)

1600

 

 

Specifications of this appliance may change without notice to improve the quality of the product. Figures in this manual are schematic and may not match your product exactly. Values stated on the machine labels or in the documentation accompanying it are obtained in laboratory in accordance with the relevant standards. Depending on operational and environmental conditions of the appliance, values may vary.

5EN

2 Warnings

Please read the following information. Otherwise, there may be the risk of personal injury or material damage.

Moreover, any warranty and reliability commitment will become void.

General Safety

Never place your machine on a carpet covered floor. Otherwise, lack of airflow from below your machine may cause electrical parts to overheat. This may cause problems with your washing machine.

If the power cable or mains plug is damaged you must call Authorised Service for repair.

Check water hoses for wear. Do not use old/used water inlet hoses. These may cause stains on your laundry.

Fit the drain hose into the waste water system securely to prevent any water leakage and to allow machine to take in and discharge water as required. It is very important that the water intake and drain hoses are not folded, squeezed, or broken when the appliance is pushed into place after it is installed or cleaned.

Your washing machine is designed to continue operating when the power restores after a power interruption.

You cannot cancel any Programme by pressing the “On/Off button.” The machine will resume its Programme when the power restores. Press the “Start/Pause/Cancel” button for 3 seconds to cancel the Programme (See, Cancelling a Programme)

There may be some water in your machine when you receive it. This is from the quality control process and is normal. It is not harmful to your machine.

Some problems you may encounter may be caused by the software. Press “Start/Pause/Cancel” button for 3 seconds to cancel the Programme set in your machine before calling the Authorised service.

First Use

To prepare your machine for washing, carry out your first washing process without loading your machine and with detergent under “Cottons 90°C” Programme.

Ensure that the cold water connections has been made correctly when installing your machine.

If the current fuse or circuit breaker is less than 13 Amperes, please have a qualified electrician install a 13 Ampere fuse or circuit breaker.

To make your machine ready for use, please be sure that the tap water supply and water drainage systems are appropriate before calling the Authorised service. If they are not, call a qualified plumber to have any necessary arrangements carried out.

Intended use

This product has been designed for home use.

The appliance may only be used for washing and rinsing of textiles that are marked accordingly.

Only detergents, softeners and supplements suitable for washing machines may be used.

Observe the care instructions labelled on textile products and any other instructions given by companies that produce detergents for your machine.

Children should be supervised to ensure that they do not play with the appliance.

This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.

Safety instructions

This appliance must be connected to

6EN

an earthed outlet protected by a fuse of suitable capacity.

The supply and draining hoses must always be securely fastened and remain in an undamaged state.

Fit the draining hose to a washbasin or waste system securely before starting up your machine. There may be a risk of being scalded due to high washing temperatures!

Never open the door or remove the filter while there is still water in the drum. Otherwise, there may be the risk of flooding and possible injury due to the hot water.

Never force open the locked door!

The door will be ready to open just a few minutes after the washing cycle comes to an end.

Unplug the machine when it is not in use.

Never wash down the appliance with a water hose! There is the risk of electric shock! Always disconnect from the mains by unplugging before cleaning.

Never touch the plug with wet hands.

Never unplug by pulling on the cable, always pull out from the plug only. Do not operate the machine if the power cord or plug is damaged.

Never attempt to repair the machine yourself. Otherwise, you may be putting yours and other’s lives in danger.

For malfunctions that cannot be solved by information in the operating manual:

Turn off the machine, unplug it, turn off the water tap and contact an Authorised service agent.

If there are children in your

house...

Electrical appliances may be dangerous for the children. Keep children away from the machine when it is operating. Do not let them tamper with the machine.

Close the door when you leave the area where the machine is located.

Store all detergents in a safe place out

of reach of the children.

Use Child/Keylock to prevent children altering the settings

Electrical connection

Make sure that you have an earthed power outlet socket rated at 13 amps (minimum).

Attention!

If you place your machine under a worktop, the socket must be reachable after installation, or a separate switch

(which can disconnect the two poles) must be used in the installation.

Connect the power cord to the appropriate electrical socket with an equivalent current rating indicated on the rating plate at the front of the machine behind the kick plate. After removing the plug from its transit position, please insert the plug seal

to prevent water spillage entering the machine.

Electrical requirements

Before you insert the plug into the wall socket make sure that the voltage and the frequency shown in the rating label corresponds to your electricity supply. We recommend that this appliance be connected to the mains supply via a suitable switched and fused socket in a readily accessible position.

Should the mains lead of the appliance become damaged or need replacing at any time, it must be replaced by a special purpose made mains lead which can only be obtained from a Authorised Service Agent.

BThis appliance must be earthed

If the fitted moulded plug is not suitable for your socket, then the plug should be cut off and an appropriate plug fitted.

Destroy the old plug, which is cut off as a plug with a bare cord could cause a shock hazard if inserted into a socket elsewhere in the house.

The moulded plug on this appliance incorporates a 13A fuse. Should the fuse need to be replaced an ASTA approved BS1362 fuse of the same rating must be

7EN

used. Do not forget to refit the fuse cover. In the event of losing the fuse cover, the plug must not be used until a replacement fuse cover has been fitted. Colour of the replacement fuse cover must be the same colour as that visible on the pin face of the plug. Fuse covers are available from any good electrical store.

Important

Fitting a different plug

As the colours of the wires in the mains lead of this appliance may not correspond with the coloured markings identifying the terminals on your plug, proceed as follows:

1Connect the green - yellow or green

(earth) wire to the terminal in the plug marked ‘E’ or with the symbol f or coloured green and yellow or green.

2Connect the blue (neutral) wire to the

terminal in the plug marked ‘N’ or coloured black.

3Connect the brown (live) wire to the terminal in the plug marked ‘L’ or coloured red.

With the alternative plugs a 13A fuse must be fitted either in the plug or adaptor or in the main fuse box. If in doubt contact a qualified electrician.

8EN

3 Installation

Removing packaging reinforcement

Tilt the machine to remove the packaging reinforcement. Remove the packaging reinforcement by pulling the ribbon.

Opening the transportation locks

C Transportation safety bolts must be removed before operating the washing machine! Otherwise, the machine will be damaged!

1.Loosen all the bolts with a spanner until they rotate freely (“C”)

2.Remove transportation safety bolts by turning them gently.

3.Fit the covers (supplied in the bag with the Operation Manual) into the holes on the rear panel. (“P”)

C Keep the transportation safety bolts in a safe place to reuse when the washing machine needs to be moved again in the future.

C Never move the appliance without the transportation safety bolts properly fixed in place!

Appropriate installation location

Install the appliance in environments which have no risk of freezing, in a stable and level position.

C The floor must be capable of carrying the load on it!

C If the washing machine and a drier are placed on top of each other, their approximate weight together may reach 180 kg when they are full.

Important:

Do not place the appliance on top of the power cable.

Keep at least 1cm distance from the edges of other furniture.

Place the machine on a firm surface; do not position it on a long pile rug or such like surfaces.

Raising the appliance

In order to raise the appliance to eliminate the gap below the worktop, you will need to order special optional kit.

Please call Beko Spare Part Department. (0845 6004911) and see built-ininstallation section.

Gap

Without optional

With optional raising

raising feet.

feet. Minimum

 

height=55 mm, max Service Ref. No. 1493

 

height=65mm

9EN

Adjusting the feet

C Do not use any tools to loosen the lock nuts. Otherwise, they can be damaged.

1.Manually (by hand) loosen the lock nuts on the feet.

2.Adjust them until the machine stands level and firm.

3.Important: Tighten all lock nuts up again.

Connecting to the water supply.

Important:

The water supply pressure required to run the machine must be 1-10bar (0,1 – 1 MPa). (Practically, it is necessary to have 10 – 80 liters of water flowing from the tap in one minute to have your machine run

smoothly.) Attach a pressure-reducingvalve if the water pressure is higher.

Connect the special hose supplied with the machine to the water intake valves on the machine.

In order to prevent water leakage that may occur at the connection points, there are rubber seals (4 seals for the models with double water inlet and 2 seals for other models) attached to the hoses. These seals should be used

at the tap and machine connection ends of the hoses. The plain end of the hose fitted with a filter must be attached to the tap and the elbowed end must be attached to the machine. Tighten the nuts of the hose well by hand; never use wrenches to tighten the nuts.

Open the taps completely after making the hose connection to check if there is any water leakage at the connection points. Turn off the tap and remove the nut in case of any leakage. Retighten the nut carefully after checking the seal. To prevent any water leakage and any other damage to be caused by it, keep the taps closed when the machine is not in use.

Models with a single water inlet should not be connected to the hot water tap. Laundry may be damaged or the appliance may switch to protection mode and not work.

When returning the appliance to its place after maintenance or cleaning, care should be taken not to fold, squeeze or block the hoses.

Connecting to the drain

The water discharge hose can be attached to the edge of a washbasin or waste water system. The drain hose

should be firmly fitted into the drain as to not loosen in its housing.

Important:

The end of the drain hose can be directly connected to the wastewater drain or to the washbasin. The fitting must be secured in all types

10 EN