Peerless Industries PJF2-1-S, PJF2-UNV-S User Manual
FEATURES
PJF2-UNV(-S)
PJF2-1(S)
PJF2 Projector Mount
For Multimedia Projectors up to 50 lb (22 kg)
Vector Pro™ II provides a clean look with its cable management capabilities. The included
extension column connector incorporates internal cable management paths that keep unsightly
cords concealed from view. The mount also features a ceiling plate, ball and socket design,
multidirectional positioning (roll, pitch and yaw) for proper image alignment and preinstalled
security hardware at every connection point. This projector mount is perfect for use in classrooms,
boardrooms, hotels, bars and restaurants or anywhere a projector needs to be mounted. The
Vector Pro™ II can be ush mounted to the ceiling or mounted on the wall. It can also be
mounted using 1-1/2" (38 mm) diameter extension column or 1/2" (38 mm) thread rod.
Max load: 50 lb (22 kg)
Pre-installed security screws
at all connection points
Quick- release mechanism
to easily service projector
Features a 1-1/2" (38 mm)
cable access hole allowing
cables to be routed
through projector mount
out of sight
Pre-assembled design
reduces installation time
Structural ceiling plate
included for ush mounting
applications
®
Spider
Universal Adapter
Plate extends up to 17.63"
(448 mm) to t most
projector models
Specications:
Tilt: ±15°
Roll: ±15°
Swivel: 360°
All with positive
lock at any
degree
QUICK IM AGE ALIGNME NT
Single point of adjustment for
quick image allignment
EFFORTLE SS PROJECTO R
MAINTENANCE
With its intuitively designed
quick-release thumbscrew that
smoothly unwinds to enable
easy-glide removal of the
projector in and out of the
mount. No tools required.
UNIVERSAL COMPATIBILITY
Includes the Spider
Adapter Plate which extends
up to 17.63" (448 mm) to t most
projector models
®
Universal
Tamper Resistant
Hardware
CLICK: www.peerlessmounts.com CALL: 800.865.2112 FAX: 708.865.2941
Includes 1 ½" (38 mm) Internal
Cable Management Access Hole
Model Specific
Adapters Available
Model Numbers
PJF2-UNV(-S): PJF2 Projector Mount with Spider® Universal Adapter Plate
PJF2-1(S): PJF2 Projector Mount (PAP model adapter plate required)
Product Specifications
DImENSIONS (W x H x D) PRODUCT WEIGHT LOAD CAPACITy FINISH AVAILABLE COLORS
PJF2-UNV(-S)
PJF2-1(S)
8.5-17.63” x 4.23-7.73” x 8.5-17.63”
(216-448 x 107-196 x 216-448 mm)
3.25” x 3.13” x 3.25”
(83 x 79 x 83 mm)
3.08 lb (1.4 kg)
1 lb (.5 kg)
Package Specifications
PACKAGE SIZE (W x H x D) PACKAGE SHIP WEIGHT PACKAGE UPC CODE PACKAGE CONTENTS UNITS IN PACKAGE
PJF2-UNV(-S)
PJF2-1(S)
9.5” x 2.5” x 12.75”
(241 x 64 x 324 mm)
4” x 4” x 8”
(101 x 101 x 203 mm)
3.58 lb (1.6 kg)
1.3 lb (.6 kg)
PJF2-UNV:
PJF2-UNV-S:
PJF2-1S:
PJF2-1:
50 lb (22 kg)
735029235545
735029235552
735029233862
735029233879
WARRANTY: Limited 5-year
Scratch
resistant
fused
epoxy
Vector Pro™ II Projector Mount,
Spider® Universal Adapter
Plate, ceiling plate, mounting
and projector attachment
hardware, assembly instructions
Vector Pro™ II Projector
Mount, ceiling plate, mounting
attachment hardware,
assembly instructions
PJF2-UNV:
PJF2-UNV-S:
PJF2-1:
PJF2-1S:
Black
Silver
Black
Silver
1
Accessories
3.25"
(83 mm)
3"
(76 mm)
Screen Height Adjustment
MINIMUMRANGE MAXIMUM
1.23" (31 mm )
X
X
(76 mm)
2.23" (57 m m)
5"
(127 mm )
3.5"
(89 mm)
3"
CEILING PLATE DETAIL
ACC830: Side-to-Side Adjuster
PWA14 & EXA/B: Wall Mount Arm
ACC050: Stability Kit
1.5"
(38 mm)
1.5"
3"
(76 mm)
5.5"
(140 mm )
(38 mm)
CORD MANAGEMENT CONNECTOR
DETAIL
All dimensions = inch (mm)
5.69"
[145 mm ]
6.29"
[160 mm ]
4.79"
[122 mm ]
17.63"
[448 mm ]
TOP VIEW OF
ADAPTER PLATE
2.19"
(56 mm)
TOP VIEW OF BALL
AND SOCKET MOUNT
SWIVEL (YAW) 360° (when attached to
an extension column),
±15° (when flush mounted) ±15° PITCH ±15° ROLL
A R C H I T E C T S S P E C I F I C A T I O N S
The Vector Pro II projector mount shall be a Peerless Model PJF2 UNV or PJF2 UNV-S and shall be mounted where indicated on the plans. It shall feature 30° (±15°)
pitch, 30° (±15°) roll, and 360° (±180°) yaw. It shall have a 50 lb load capacity. It shall have a quick release spring loaded screw for easy removal and installation of
the projector. It shall feature security screws. It shall be constructed of aluminum and nylon nished in black or silver. The main housing is constructed of aluminum.
The connector, which locks into the steel adapter plate, is constructed of nylon and is secured to the aluminum ball joint with a 1/4 -20 x 1 1/2” long steel bolt. The
nylon material can take direct heat up to 250° without any deformation. Its melting point is 500° F. The Vector Pro II is capable of holding up to 50 lb at the maximum
Peerless Industries, Inc. 3215 W. North Avenue Melrose Park, IL 60160 (800) 865-2112 (708) 865-8870 Fax: (708) 865-2941 www.peerlessmounts.com
Visit peerlessmounts.com to see the full line of Peerless LCD/plasma, projector and TV/monitor mounts. © 2009 Peerless Industries, Inc. All rights reserved.
15° roll or pitch. Installation and assembly shall be done in accordance with the instructions provided by the manufacturer.
LIT-0379
Loading...